On the deformation mechanisms of oriented PET and PP films under load

Uniaxially orienred semicrystalline poly(ethylene terephthalate) (PET) and poly(propylene) (PP) films were loaded parallel to draw direction at various temperatures. Changes in the submicroscopical structure of the films under load were examined by small and wide-angle x-ray scattering (SAXS; WAXS) and birefringence measurements. WAXS measurements reveal a decrease of the initial high orientation of the chains in the crystallites during deformation. Simultaneously, an increase of the birefringence was detected, indicating an orientation of chains in the amorphous regions. The alteration of the long period reflections in the SAXS patterns give strong evidence that lamellar stacks with different orientation angles according to load direction are present. Depending on the orientation of stacks, the contribution of lamellar separation to sample deformation alters, giving rise to different amounts of density changes in the stacks. Absolute intensity measurements of SAXS using a Kratky apparatus reveal that lamellar separation occurs preferentially below or in the range of the glass-transition temperature at small strain. With increasing strain and temperatures above the glass-transition slip deformation mechanisms become more important. The formation of microvoids was observed at strain near to elongation at break below or in the range of glass-transition temperature.     

The microstructure of poly(vinyl chloride) as revealed by x-ray and light scattering

Small-angle x-ray scattering (SAXS) and wide-angle x-ray scattering (WAXS) as well as small-angle light-scattering (SALS) techniques have been applied to investigate the microstructure of a number of commercial poly(vinyl chloride) (PVC) samples. From the wide-angle x-ray scattering, crystallinity and crystal size parameters have been determined. The crystallinity of the samples investigated range from 5% to 10%. Superstructure parameters such as crystallite thickness, distribution functions of crystallite and amorphous thicknesses, and size of ordered regions have been obtained by an analysis of the SAXS curves using the cluster model. The crystallinity agrees well with the WAXS crystallinities indicating that most of the crystals are lamellar shaped, though some rodlike entities are present in the sample as is shown by the small-angle light scattering. From the SAXS analysis, the microstructure is described as clusters of lamella stacks which are identical with the subprimary particles. Their size is determined to be 220–240 Å. Emulsion type PVC also contains lamellar-shaped crystals. The superstructure, however, of this type of PVC is different from that of mass or suspension-polymerized material. The SAXS curve does not reveal any correlation between the crystals.     

Phase behaviour of star-shaped binary mixtures of triphenylbenzenes,triphenylboroxines and triphenyltriazines

ABSTRACT

Star-shaped nonaalkoxy-1,3,5-triphenyltriazines were prepared and their mesomorphism was investigated by differential scanning calorimetry (DSC), polarised optical microscopy (POM) and X-ray diffraction (WAXS and SAXS). Compounds with chain lengths C₉ – C₁₂ displayed enantiotropic hexagonal columnar mesophases over a wide range of temperature. Their similarity in molecular size and mesomorphism prompted us to study their binary mixtures with previously reported planar 1,3,5-triphenylboroxines and propeller-shaped 1,3,5-triphenylbenzenes. All three compounds are fully miscible in their hexagonal columnar mesophases, but mixtures of planar with propeller-shaped compounds generated columnar stacks that contain only one type of molecule to avoid their shape incompatibility. However, the two types of columnar stacks were fully miscible which circumvented macroscopic phase separation.     

Micro‐phase‐separation behavior of amphiphilic polyurethanes involving poly(ethylene oxide) and poly(tetramethylene oxide)

The temperature dependence of thermal, morphological, and rheological properties of amphiphilic polyurethanes was examined with differential scanning calorimetry (DSC), wide‐angle X‐ray scattering (WAXS), small‐angle X‐ray scattering (SAXS), rheological measurements, and Fourier transform infrared spectroscopy. Multiblock (MPU) and triblock (TPU) polyurethanes were synthesized with two crystallizable segments—poly(ethylene oxide) (PEO) as a hydrophilic block and poly(tetramethylene oxide) (PTMO) as a hydrophobic block. DSC and WAXS measurements demonstrated that the microphase of MPUs in the solid state is dominantly affected by the PEO crystalline phase. However, high‐order peaks were not observed in the SAXS measurements because the crystallization of the PEO segments in MPUs was retarded by poor sequence regularity. The microphase in the melt state was induced by the hydrogen bonding between the N? H group of hexamethylene diisocyanate linkers and the ether oxygen of PEO or PTMO blocks. As the temperature increased, the smaller micro‐phase‐separated domains were merged into the larger domains, and the liquidlike ordering was eventually disrupted because of the weakening hydrogen bonding. However, the fully homogeneous state of an MPU with a molar ratio of 5/5 PEO/PTMO (MPU55) was not confirmed even at much higher temperatures with both SAXS and rheological measurements. However, the SAXS patterns of TPU showed weak but broad second‐order peaks below the melting temperature of the PEO block. Compared with MPU55, the ordering of the TPU crystalline lamellar stacks was enhanced because of the high sequence regularity and the low hydrogen‐bonding density. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2365–2374, 2003     

Crystallization and chain conformation of semicrystalline and amorphous polymer blends studied by wide‐angle and small‐angle scattering

We examine the crystallization and chain conformation behavior of semicrystalline poly(ethylene oxide) (PEO) and amorphous poly(vinyl acetate) (PVAc) mixtures with wide‐angle X‐ray diffraction (WAXD), small‐angle X‐ray scattering (SAXS), and small‐angle neutron scattering (SANS) experiments. For blends with PEO weight fractions (wt_PEO) greater than or equal to 0.3, below the melting point of PEO, the WAXD patterns reveal that crystalline PEO belongs to the monoclinic system. The unit‐cell parameters are independent of wt_PEO. However, the bulk crystallinity determined from WAXD decreases as wt_PEO decreases. The scattered intensities from SAXS experiments show that the systems form an ordered crystalline/amorphous lamellar structure. In a combination of WAXD and SAXS analysis, the related morphological parameters are assigned correctly. With the addition of amorphous PVAc, both the average amorphous layer thickness and long spacing increase, whereas the average crystalline layer thickness decreases. We find that a two‐phase analysis of the correlation function from SAXS, in which the scattering invariant is linearly proportional to the volume fraction of lamellar stacks, describes quantitatively the crystallization behavior of PEO in the presence of PVAc. When wt_PEO is close to 1, the samples are fully spaced‐filled with lamellar stacks. As wt_PEO decreases from 1.0 to 0.3, more PVAc chains are excluded from the interlamellar region into the interfibrillar region. The fraction outside the lamellar stacks, which is completely occupied with PVAc chains, increases from 0 to 58%. Because the radius of gyration of PVAc with a random‐coil configuration determined from SANS is smaller than the average amorphous layer thickness from SAXS, we believe that the amorphous PVAc chains still persist with a random‐coil configuration even when the blends form an ordered structure. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2705–2715, 2001     

Real‐time SAXS and WAXS study of the multiple melting behavior of poly(ε‐caprolactone)

The multiple melting behavior of poly(ε‐caprolactone) (PCL) was investigated by real‐time small angle X‐ray scattering (SAXS) and wide angle X‐ray scattering (WAXS) measurements coupling with differential scanning calorimetry (DSC). Semicrystalline specimens prepared by a continuous cooling process showed lengthening of the Bragg period during the progress of double melting. A model of variable thickness of lamella was proposed to fit to the SAXS patterns and revealed that both the crystalline lamella and the amorphous layer contributed to the increase in Bragg period while the later dominated the contribution. The model of variable thickness although satisfied the SAXS data was unable to compromise the data from other probing tools. A modification of the model proposed that each lamella piling up to construct the stacks in the crystallites was itself nonuniform in thickness. The modification with the parallel occurrence of the mechanism of surface melting and crystallization successfully compromised the observations from SAXS, DSC, and optical microscopy and provided a new perspective for the explanation to lengthening of the Bragg period related to multiple melting behavior. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1777–1785, 2010     

A New System of Multiple Emulsions with Lamellar Gel Phases from Vegetable Oil

Emulsions are excellent pharmaceutical vehicles used in both the pharmacy and cosmetic industries. Vegetable oils have several effects/benefits on skin and can be used in emulsions to release principal active components for cosmetic purposes. Herein, multiple W/O/W emulsions were formulated in a one-step emulsification method, and the resulting anisotropic structures were characterized by x-ray diffraction measurements. The multiple emulsions obtained were stable and maintained their anisotropic structures over 2 years. WAXS (wide-angle x-ray scattering) measurements of these emulsions suggested that the carbon chains of the surfactant around the globules are disposed in a gel network phase. Furthermore, SAXS (small-angle x-ray scattering) measurements indicated that the surfactant is organized in lamellar layers around the globules. Thus, for the first time, we demonstrated that stable lamellar gel phase multiple emulsions can be made from vegetable oils. In addition to having the advantage of being prepared in one step, these emulsions have desirable characteristics that can be used in the cosmetic industry as natural active principles with low surfactant concentration and the unique features of multiple emulsions with gel phases.     

Lamellar cluster structure formation resulting from interchain interaction in a novel aromatic polyimide based on PMDA monomer

The aggregation structure of a novel polyimide ( PIM ‐ 6 ) with six methylene flexible spacing groups in biphenyl side chain synthesized by the traditional two‐step imidisation process was investigated by polarized light microscope (PLM), small angle X‐ray scattering (SAXS), wide angle X‐ray scattering (WAXS), and molecular simulation approach. The agreement between the experimental data and simulation result reveals that due to the predominant interchain interaction, each three backbones stack together to form a distinct lamellar cluster with side chains packed inside dispersedly. The thickness of the lamellar cluster is about 16.0 A°, corresponding to a strong peak at 5.5° in SAXS pattern. As the backbone is not perfectly parallel to each other in each lamellar cluster, the distance between each backbone ranges from 5.8 to 8.8 A° possibly relating to the weak peak at 9.8° in WAXS pattern. Meanwhile, no birefringence or apparent phase texture has been observed by PLM indicating an amorphous nature in this film. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

小角X射线散射表征AOT/水层状溶致液晶的有序性

用小角X射线散射研究了AOT/水层状溶致液晶的有序性. 通过对散射曲线的解析, 讨论了表面活性剂浓度、温度和助表面活性剂等三个方面对溶致液晶层状相结构有序性的影响. 在一定的范围内, 提高温度, 改变表面活性剂浓度和加入少量助表面活性剂可使碳氢链排列由稀疏转变为密实, 层状相也相应地由“柔性双层”过渡到更加有序化的“平面双层”. 基于形状因子和体系内分子间作用力, 提出了层状相形成与有序化的机理, 同时采用分子模拟的方法展现了不同浓度下的液晶结构.     

利用小角/广角X射线散射联用及一维相关函数分析研究聚(ε-己内酯)片晶的形态

用小角/广角X射线散射(SAXS/WAXS)联用的实验方法考察了等温结晶温度(Tc)和等温时间对聚(ε-己内酯)(PCL)片晶形态的影响.根据WAXS数据计算了PCL的重量结晶度,进而求得其体积结晶度Vc(WAXS).在不同Tc下结晶的PCL样品的Vc(WAXS)均略高于50%.对SAXS谱线做一维相关函数(1DCF)分析,得到了PCL的片晶长周期(LP)和无定形层厚度(La).通过比较WAXS及SAXS的数据分析结果,认为PCL晶体需用"三相模型"予以描述,其过渡层厚度(E)约为LP的15%～18%,对片晶形态具有重要影响.随着Tc升高,PCL晶体的Lc、La及E均逐渐增大,但Lc的变化率最大,这使得结晶度上升.在50℃等温结晶不同时间,发现Lc随延长时间显著增加,而La及E则不断减小.等温10天后,PCL晶体的SAXS谱线上可观察到5级散射,表明片晶相当完善.     

Supramolecular Materials Comprising Nucleic Acid Biopolymers

We have generated a supramolecular self-assembling film by exchanging the counter-ions of the phosphate moieties in nucleic acid with those of cationic amphiphiles as didodecyldimethylammonium bromide (or DDAB). SAXS and WAXS data for all film samples showed similar harmonic peaks suggesting a lamellar multilayer structure with layers of nucleic acids being separated by lipid bilayers of DDAB. AFM height images also showed that double stranded nucleic acid film can form the step or plateau type of structure and shorter nucleic acid film showed shorter step feature. Moreover, the length and the molecular structure of DNA and RNA can be used to manipulate the mechanical properties of these self-assembled films.     

DC(13)PC bilayers from anomalous swelling to main transition: an X-ray scattering investigation

We have performed small-angle (SAXS) and wide-angle X-ray scattering (WAXS) measurements on the lamellar phase and on large unilamellar vesicles (LUVs) of DC(13)PC in the temperature range corresponding to the anomalous swelling regime of multibilayer systems, adjacent to the chain melting transition, and across the transition. Our SAXS measurements indicate that on cooling from the L(alpha) phase, a uniform progressive swelling of the lamellar system to anomalous distances, starting approximately 2 degrees C above the main transition, is followed by a region of coexistence, covering the width of the transition ( approximately 0.6 degrees C). Across the transition region, a progressively increasing volume fraction of gel phase with a constant P (beta') interlamellar distance coexists with a decreasing amount of nongel phase that keeps on swelling to longer distances. Along both the swelling and the transition regions, anomalies in the specific heat are observed revealing a two-step process. Simultaneous WAXS experiments show a progressive "density" increase along the swelling region, constituting a direct spectroscopic evidence of an "evolving membrane" approaching the transition in a bulk real system. Calorimetric and densitometric measurements on LUVs are also presented, together with WAXS results, that show the existence of a double step main transition in a single component nanosized closed bilayer.     

Oriented lamellar structures in uniaxially drawn films of poly(vinylidene fluoride) and poly(3‐hydroxybutyrate) blends studied by small‐angle X‐ray scattering measurements

The lamellar structures in uniaxially drawn films of miscible crystalline/crystalline polymer blends of poly(vinylidene fluoride) (PVDF) and poly(3‐hydroxybutyrate) (PHB) were investigated by static and time‐resolved measurements of small‐angle X‐ray scattering (SAXS). Intense SAXS in the low angle range of the meridian was interpreted as originating from the interlamellar inclusion structure, in which the PHB chains were included between the lamellae of PVDF. The interlamellar inclusion was induced for the uniaxially drawn films of PVDF/PHB = 30/70 blend with a draw ratio (DR) of 2.8–4.5, whereas the lamellae of the PVDF and PHB components were mutually excluded from each other forming their own lamellar stacks (interlamellar exclusion) in the blend with a higher DR (5.0–5.7). When the highly drawn film with the interlamellar exclusion structure was heat treated at 154–165 °C, the interlamellar inclusion structure was partially induced by the heat treatment. The time‐resolved SAXS measurements indicated that the interlamellar inclusion structure was developed by melting and recrystallization of PVDF during the heat treatment. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 381–392, 2009     

Plasticization and cocrystallization in LLDPE/wax blends

The structure and thermal properties of linear low‐density polyethylene (LLDPE)/medium soft paraffin wax blends, prepared by melt mixing, were investigated by differential scanning calorimetry (DSC) and small‐ and wide‐angle X‐ray scattering (SAXS and WAXS). The blends form a single phase in the melt as determined by SAXS. Upon cooling from the melt, two crystalline phases develop for blends with more than 10 wt % wax characterized by widely different melting points. The wax acts as an effective plasticizer for LLDPE, decreasing both its crystallization and melting temperature. The higher melting point crystalline phase is formed by less branched LLDPE fractions. On the other hand, the lower melting point crystalline phase is a wax‐rich phase constituted by cocrystals of extended chain wax and short linear sequences of highly branched LLDPE chains. The presence of cocrystals was evidenced by standard DSC results, successive self‐nucleation and annealing (SSA) thermal fractionation and by the detection of a new SAXS signal attributed to the lamellar long period of the cocrystals. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1469–1482     

Synchrotron SAXS and WAXS Studies on Changes in Structural and Thermal Properties of Poly[(R)‐3‐hydroxybutyrate] Single Crystals during Heating

Summary: The annealing and melting behavior of poly[(R)‐3‐hydroxybutyrate] (P(3HB)) single crystals were followed in real time by synchrotron small‐ (SAXS) and wide‐angle X‐ray scattering (WAXS) measurements. The real‐time SAXS measurements revealed that the P(3HB) single crystal exhibits a discontinuous increase of lamellar thickness during heating. The structural changes as observed by SAXS and WAXS were in response to the thermal properties of single crystals characterized by differential scanning calorimetry.

A series of two‐dimensional small‐angle X‐ray scattering patterns of P(3HB) single crystal mats during the lamellar thickening process.     

Lamellar structural changes in miscible crystalline polymer blends during melting and crystallization processes,as studied by real‐time small‐angle X‐ray scattering measurements

Real‐time small‐angle X‐ray scattering (SAXS) measurement using synchrotron radiation was applied to study the lamellar structural changes in miscible crystalline polymer blends of poly(1,4‐butylene succinate) (PBSU) and poly(vinylidene fluoride) (PVDF) during melting and crystallization processes. The lamella of PBSU is either included in the interlamellar region of PVDF (interlamellar inclusion structure), or rejected from the interlamellar region of PVDF (interlamellar exclusion structure). The two lamellar structures coexists in the melt‐quenched samples of the PBSU/PVDF = 30/70 blend. Only the interlamellar exclusion structure exists in the drawn films of the PBSU/PVDF = 30/70 blend. The real‐time SAXS results show that the interlamellar exclusion structure in these samples is irreversibly transformed into the interlamellar inclusion structure by heating the sample above the melting temperature of PBSU and that the PBSU chains are crystallized between the lamellae of PVDF during the cooling process. The factors controlling the lamellar structural changes are possibly a balance of the miscibility and the chain exclusion by tie‐molecules and/or the chain diffusion under confinement by the lamellae of PVDF with higher melting temperature. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1959–1969, 2007     

SAXS experiments on gel-spun polyethylene fibers

The properties of gel-spun polyethylene fibers hot-drawn to the maximum draw ratio depend on the spinning conditions. Different spinning conditions result in two types of structure in the paraffin oil containing fibers: an isotropic lamellar structure or a shish-kebab structure. Meridional SAXS experiments can identify the structure present. After extraction, these structures are still present but can be detected only in a more indirect way by SAXS experiments because of an excessive contribution of void scattering. During hot-drawing both structures are transformed into a more fibrillar structure. The shish-kebab structures can be drawn only to relatively low hot-draw ratios with an incomplete transformation of the lamellar overgrowth into the fibrils, as demonstrated by the presence of a meridional SAXS maximum/shoulder. This leads to relatively weak fibers. Lamellar structures can be drawn to high draw ratios by chain unfolding. A nearly complete transformation of the lamellae into fibrils is obtained and the fibers have excellent properties. The information about the morphology obtained by SAXS, DSC, WAXS, and SEM can be used to establish a relation between morphology and properties.     

SAXS Studies of Heating/Cooling Cycle Behavior of Biodegradable BTA/PLA-b Blends

Summary : The blends of BTA copolyester (i.e. the Ecoflex® copolyester) and PLA-b amorphous polylactide with following weight ratios: 90/10, 70/30 and 50/50 have been prepared and their phase structure have determined by using X-ray methods and DSC method. The thermal behavior of the blends was tested by time resolved SAXS measurements performed during heating/cooling thermal cycle treatment (20÷135÷20 °C). As a result of analysis of desmeared Lorentz corrected SAXS curves using the Hosemann scattering function the changes of characteristics of lamellar structure of BT-BA stacks within the blends have been determined and linked with changes of lamellar superstructure of the BTA reference sample. Among other thinks, it was found that the rate of the heating induced growth of the BA amorphous layers thickness and consequently of long period of BT-BA stacks structure increases with the increase of PLA-b amount, and that BT-BA stacks are formed significantly later (ca. 5 min.) during the cooling of the melted blends than during the cooling of the melted BTA copolyester.     

Fragmentation of the lamellae and fractionation of polymer coils upon mixing poly(dimethylacrylamide) with the lamellar phase of aerosol OT in water

The lamellar mesophase formed by surfactant 1,4-bis(2-ethylhexyl) sodium sulfosuccinate (AOT) in deuterated water is mixed with poly(dimethylacrylamide) (PDMAA) polymers of low molecular weight (Mn= (2-20) x 10(3)). The mixtures separate into microphases (lamellar plus isotropic polymer solution). Their microstructures are studied by microscopy, small-angle X-ray scattering (SAXS), and deuterium NMR (2H NMR). According to SAXS, the lamellar phase fractionates the molecular weight distribution of the polymer, by dissolving only chains with coil sizes smaller than the thickness of the water layers between lamellae, and keeping larger chains segregated from the lamellar phase. The fraction of polymer that is segregated from the lamellar phase grows with Mn of the polymer. In 2H NMR, there are two signals, a quadrupolar doublet (water molecules hydrating the anisotropic lamellar phase contribute to this doublet) and a singlet (water molecules in the isotropic polymer solution contribute to this singlet). These two signals are deconvoluted to analyze the phases. Mixing with the polymer produces the partial dispersion of the lamellar phase into small fragments (microcrystallites). The structure of these microcrystallites is such that they conserve the regular long period spacing of the macrophase, and are thus identified in SAXS, but they are smaller than the minimum size required to produce quadrupolar splitting (about 4 microm), and therefore, in 2H NMR, they contribute to the singlet. 2H NMR can thus not distinguish between small microcrystallites and an isotropic polymer solution segregated from the lamellar phase; instead small microcrystallites are detected as an apparent increase of the isotropic solution. The degree of dispersion produced by the polymer in the lamellar phase is correlated with the degree of segregation that the polymer suffers. Thus, much greater dispersion into microcrystallites is produced by the higher Mn polymers than by the lower Mn polymers (in the range covered by the present samples, although with a much higher molecular weight sample (3 x 10(6)) that is totally segregated no such microcrystallites were detected).     

Crystalline structure of polyamide 12 as revealed by solid‐state 13C NMR and synchrotron WAXS and SAXS

The crystalline structure of polyamide‐12 (PA12) was studied by solid‐state ¹³C nuclear magnetic resonance (NMR) as well as by synchrotron wide‐ and small‐angle X‐ray scattering (WAXS and SAXS). Isotropic and oriented PA12 showed different NMR spectra ascribed to γ‐ and γ′‐crystalline modifications, respectively. On the basis of the position of the first diffraction peak, the isotropic γ‐form and the oriented γ′‐form were shown to be with hexagonal crystalline lattice at room temperature. When heated, the two PA12 polymorphs demonstrated different behaviors. Above 140 °C, the isotropic γ‐PA12 partially transformed into α‐modification. No such transition was observed with the oriented γ′‐PA12 phase even after annealing at temperatures close to melting. A γ′–γ transition was observed here only after isotropization by melting point. Various structural parameters were extracted from the WAXS and SAXS patterns and analyzed as a function of temperature and orientation: the degree of crystallinity, the d‐spacings, the Bragg's long spacings, the average thicknesses of the crystalline (l_c) and amorphous (l_a) phases, and the linear crystallinity x_cl within the lamellar stacks. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 3720–3733, 2005