Determination of Selenium(IV) by Stripping Voltammetry at a Mercury-Film Electrode

A procedure was proposed for the determination of selenium(IV) by stripping voltammetry on a mercury-film electrode at an electrolysis potential of +0.4 V versus the saturated silver–silver chloride reference electrode in a 1 M H₂SO₄ solution. The current of the cathodic peak is a linear function of the selenium(IV) concentration in the range from 5 × 10^–3 to 3 × 10^–1 mg/L (6.3 × 10^–8 to 3.8 × 10^–6 M) at a time of electrolysis of 30 s (t _el). The detection limit for selenium is 1 × 10^–4 mg/L (1.3 × 10^–9 M) at t _el = 300 s. It was shown that selenium(IV) can be determined in the presence of 10 mg/L Zn(II), 1 mg/L Cd(II), 0.5 mg/L Pb(II), and 0.2 mg/L Cu(II). A procedure for the determination of selenium in natural, mineral, and potable water was proposed.     

Spectrophotometric determination of cationic and anionic surfactants with anionic dyes in the presence of nonionic surfactants,part II: Development of batch and flow injection methods

On the basis of the changes in absorption spectra of azo dyes on the addition of an organic onium ion, spectrophotometric methods for the determination of organic onium salts and anionic surfactants were developed, and applied to flow injection method. Propyl orange (PO^–) was used for the determination of organic onium ions. Pairs of PO^– and Zeph⁺ (tetradecyldimethyl-benzylammonium ion) or PO^– and nC₁₈TMA⁺ (n-octadecyltrimethylammonium ion) were used for the determination of anionic surfactants. The determination range of organic onium ions were (0–3) × 10^–5 M by a batch method and were (0–2) × 10^–5 M by a flow injection method. The determination ranges of anionic surfactants were (0–2) × 10^–5 M by the batch method, and were (0–5) × 10^–5 M by the flow injection method, and the detection limit corresponding toS/N = 3 was 3 × 10^–7 M by the flow injection method. By the proposed flow injection method, anionic surfactants in water samples were determined.     

The effect of high pressure on the ion pair equilibrium constant of alkali metal fluorides: A spectrophotometric study

Bromophenol blue indicator was used in UV-visible spectrophotometric measurements to study ion association constants of alkali metal fluorides. The equilibrium constants for the ion pair formation of the alkali metal fluorides were determined as a function of ionic strength at one atmosphere pressure and 25°C. The effect of pressure on these association constants was measured at a constant total ionic strength of 1.0 mol-kg^–1 over a pressure range of 1 to 2000 atmospheres at 25°C. The pressure dependences of the stoichiometric association constants of the alkali metal fluorides are given by: lnK _LiF ^* =0.77–2.47×10^–4P–2.12×10^–8P²; lnK _NaF ^* =0.53–1.08×10^–4P–1.66×10^–8P²; lnK _KF ^* =0.24–4.41×10^–5P–7.15×10^–8P²; lnK _RbF ^* =–0.17–8.65×10^–5P–4.51×10^–8P²; and lnK _CsF ^* = –0.37–1.14×10^–4P–6.82×10^–8P², where P is the pressure in atmospheres. The stoichiometric molar volume and compressibility changes for ion pair formation of the alkali metal fluorides were evaluated from the pressure dependence of K _MF ^* data. The thermodynamic association constants were also calculated making use of activity coefficient data from the Pitzer equations. The partial molal volume and compressibility changes for ion pair formation of each alkali metal fluoride are reported.     

Gas-Chromatographic Determination of Sarin, Soman, and O-Isobutyl S-2-(N,N-Diethylamino)ethyl Methylphosphonothioate (a VX-Like Compound) Traces in Water

A gas-chromatographic procedure for the determination of O-isobutyl S-2-(N,N-diethylamino)ethyl methylphosphonothioate (VX), sarin, and soman in water at levels of 2 × 10^–6, 5 × 10^–5, and 2 × 10^–6 mg/L, respectively, was proposed. The procedure includes liquid–liquid extraction with the use of salting-out agents, back extraction, and evaporation. In this case, the VX compound was converted into O-isobutyl O-methyl methylphosphonate (a substance convenient for chromatographic determination) by the reaction with hydrochloric acid, methanol, thriethylamine, and silver nitrate.     

Phenacyl dimethyl sulphonium ylide-mercuric chloride complex initiated radical polymerization of methylmethacrylate

Summary The metal-ylide-initiated radical polymerization of methylmethacrylate (MMA) at 85±0.1°C using dioxan as inert solvent was investigated by dilatometry. Kinetic parameters, average rate of polymerization (R _p ) and reaction orders with respect to initiator and monomer have been determined and are 0.33±0.1 and 1.33, respectively. Polymerization was inhibited by hydroquinone and non-polar solvents, but is favoured by polar solvent. The activation energy (E) and k _p ² /k_t values were 64.0 kJ mol^–1 and 3.3×10^–2 l mol^–1 s^–1 respectively. A suitable mechanism consistent with the observed kinetic data is proposed.     

Application of Thermal-Lens Spectrometry to a Study of the Interaction of Trace Nickel(II) with Dimethylglyoxime

Thermal-lens spectrometry was applied to a study of the properties of a nickel(II) complex with dimethylglyoxime at a concentration level of n × 10^–8–n × 10^–6 mol/L. The possibility of determining the solubility of the complex and the characteristics of its adsorption on the glass surface of laboratory ware was demonstrated. The stability constants of the complex in water–ethanol mixtures (9 : 1) were determined. The found data made it possible to optimize the conditions for the photometric determination of nanomolar concentrations of nickel. The optimized procedure was used for a thermal-lens determination of nickel(II) traces in heteropoly compounds and high-purity water.     

Polarographic behaviour of 2-benzilidenimino-benzohydroxamic acid (2-BIBH) and 2-BIBH-Mo(VI) system

The polarographic behaviour of 2-benzilideniminobenzohydroxamic acid (2-BIBH) solutions and of 2-BIBH solutions in the presence of Mo(VI) have been studied by using differential pulse polarography and cyclic voltammetry. The polarographic characteristics of the resulting waves have been studied and possible mechanisms of the processes involved have been proposed. A linear relationship has been observed betweenI _p and Mo(VI) concentration in the range 2×10^–6 to 1.6×10^–5 M when using 3×10^–4 M 2-BIBH. Standard deviations of 5.6×10^–8 and 1.2×10^–8 M were found for 3×10^–6 and 8 × 10^–6 M Mo(VI), respectively.     

Solubility of Solid Pentane, 2-Methylbutane, and Cyclopentane in Liquid Argon at 87.3 K

The solubilities of solid pentane, 2-methylbutane (isopentane), and cyclopentane in liquid argon at 87.3 K have been measured by the filtration method. The C₅ hydrocarbon content in solution was determined using gas chromatography. The solubilities of the C₅ hydrocarbons in liquid argon at 87.3K vary from 0.61 × 10^–7 mole fraction for cyclopentane, to 1.37 × 10^–7 mole fraction for pentane, and 8.83 × 10^–6 mole fraction for 2-methylbutane. The Preston–Prausnitz method was used for calculation of the solubilities of solid C₅ hydrocarbons in liquid argon in the temperature range 84–110 K and in liquid nitrogen in the range 64–90K. The values of the solvent–solute interaction constant l ₁₂ were also calculated.     

Schnelle coulometrische Mikrobestimmung einzelner Polythionate

Zusammenfassung Das neue Mikrobestimmungsverfahren beruht auf der coulometrischen Titration von S₂O₃ ^2– nach vorheriger Abbaureaktion der Polythionate mit Sulfit bzw. Cyanid. Es werden 10 ml Probelösung (S₄O₆ ^2–: 5 · 10^–5 bis 1 · 10^–3 M; S₅O₆ ^2–; 2,5 · 10^–5 bis 1· 10^–3 M; S₆O₆ ^2–: 1,66 · 10^–5 bis 1 · 10^–3 M) benötigt. Die Titrationskurve wird von einem Schreiber registriert. Die Reproduzierbarkeit der jeweiligen Einzelbestimmung liegt bei VK _p±0,1 bis ± 1,6%.

---

Rapid coulometric microdetermination of individual polythionates

The method described is based on the coulometric titration of S₂O₃ ^2– after a preceding degradation of the polythionates with sulphite or cyanide. 10 ml of sample solution are required (S₄O₆ ^2–: 5× 10^–5 to 1×10^–3 M; S₅O₆ ^2– : 2.5×10^–5 to 1×10^–3 M; S₆O₆ ^2–: 1.66×10^–5 to 1×10^–3 M). The titration curve is recorded. The reproducibility of a single determination is VK _p±0.1 to ± 1.6%.

     

Adsorptive stripping voltammetric determination of cobalt in the presence of dimethylglyoxime and cetyltrimethylammonium bromide

A sensitive procedure for determination of micro-traces of Co(II) by adsorptive stripping voltammetry is proposed. The procedure exploits the enhancement of the cobalt peak obtained by use of the system Co(II)–dimethylglyoxime–piperazine-1,4-bis(2-ethanesulfonic acid)–cetyltrimethylammonium bromide. Using the optimized conditions, a detection limit (based on the 3 criterion) for Co(II) of 1.2×10^–11 mol L^–1 (0.7 ng L^–1) was achieved. The calibration plot for an accumulation time of 30 s was linear from 5×10^–11 to 4×10^–9 mol L^–1. The procedure was validated by analysis of certified reference materials and natural water samples.     

Thiazolylblue tetrazolium bromide — a new spectrophotometric reagent for determination of manganese

A method has been developed for the micro-determination of Mn(VII) by the selective extraction of the MnO₄ ^– anion with thiazolylblue tetrazolium bromide from acidic medium. The molar absorptivity of the complex is 1 × 10⁴lmol^–1cm^–1 at 250 nm and the system obeys Beer's law in the range 0.1–1.75 gml^–1 Mn(VII). The composition and stability of the complex are discussed. The characteristic values for the extraction equilibrium and the equilibrium in the aqueous phase are: extraction constantK _ex = 3.16 × 10⁴, distribution constantK _D = 21.85 and association constant =1.45 × 10³. Manganese(VII) was determined in soils and plants. The determination was carried out without preliminary separation of manganese.     

Equilibrium Structure of Beryllium Dibromide from Combined Gas Electron Diffraction and Vibrational Spectroscopy Analysis

The molecular structure of BeBr₂ has been investigated by gas-phase electron diffraction at the temperature 800(10) K. The conventional analysis yielded the following values: r _g(Be–Br) = 1.944(6)Å, l(Be–Br) = 0.068(4)Å, r _g(Br–Br) = 3.848(8)Å, l(Br–Br) = 0.109(3)Å, k(Be–Br) = 1.1(1.1) × 10^–5 ų, (Br–Br) = 2.1(1.0) × 10^–5 ų. Three models of nuclear dynamics were used to simulate the conventional analysis values—infinitesimal vibrations and two models, which take into account the kinematic and dynamic anharmonicity of the bending vibration. All models give similar values of bond angle, amplitudes, and shrinkage, excluding the harmonic model, which yields too low value l(Br–Br). The equilibrium bond distance r _e(Be–Br) = 1.932(11) Å was estimated, taking into account the anharmonicity corrections for stretching and bending vibrations and centrifugal distortion.     

Determination of the solubility of vinyl stearate in water by a monolayer technique

Summary The surface activity of vinyl stearate has provided a method for determining its solubility in water to be 0,7±0,2×10^–6 mole/litre. The methods described above could be used to determine the solubility in water of any sparingly soluble surface active compound, such as stearic acid or cetyl alcohol, which formed a stable monolayer at theA/W interface. Method A could be used for compounds with a solubility as low as 10^–5 mole/litre where as for Method B solubilities as low as 10^–7 mole/litre could be measured.     

Use of ICP and XAS to determine the enhancement of gold phytoextraction by <Emphasis Type="Italic">Chilopsis linearis</Emphasis> using thiocyanate as a complexing agent

Under natural conditions gold has low solubility that reduces its bioavailability, a critical factor for phytoextraction. Researchers have found that phytoextraction can be improved by using synthetic chelating agents. Preliminary studies have shown that desert willow (Chilopsis linearis), a common inhabitant of the Chihuahuan Desert, is able to extract gold from a gold-enriched medium. The objective of the present study was to determine the ability of thiocyanate to enhance the gold-uptake capacity of C. linearis. Seedlings of this plant were exposed to the following hydroponics treatment: (1) 5 mg Au L^–1 (2.5×10^–5 mol L^–1), (2) 5 mg Au L^–1+10^–5 mol L^–1 NH₄SCN, (3) 5 mg Au L^–1+5×10^–5 mol L^–1 NH₄SCN, and (4) 5 mg Au L^–1+10^–4 mol L^–1 NH₄SCN. Each treatment had its respective control. After 2 weeks we determined the effect of the treatment on plant growth and gold content by inductively coupled plasma–optical emission spectroscopy (ICP–OES). No signs of shoot-growth inhibition were observed at any NH₄SCN treatment level. The ICP–OES analysis showed that addition of 10^–4 mol L^–1 NH₄SCN increased the concentration of gold by about 595, 396, and 467% in roots, stems, and leaves, respectively. X-ray absorption spectroscopy (XAS) studies showed that the oxidation state of gold was Au(0) and that gold nanoparticles were formed inside the plants.     

Solubility of Solid 2-Methyl-1,3-butadiene (Isoprene) in Liquid Argon and Nitrogen at the Standard Boiling Points of the Solvents

The solubility of solid 2-methyl-1,3-butadiene (isoprene) in liquid argon at a temperature of 87.3 K and in liquid nitrogen at 77.4 K has been measured by the filtration method. The hydrocarbon contents in solutions were determined using gas chromatography. GC–MS was used to identify impurities in the solute. The experimental value of the mole fraction solubility of solid isoprene in liquid argon at 87.3 K is (1.41 ± 0.27) × 10^–6 and (1.56 ± 0.36) × 10^–7 in liquid nitrogen at 77.4 K. The Preston–Prausnitz method was used for calculation of the solubilities of solid hydrocarbon in liquid argon in the temperature range 84.0–110.0 K and in liquid nitrogen from 64.0 to 90.0 K. The solvent–solute interaction parameters l ₁₂ were also calculated. At 90.0 K liquid argon is a better solvent for isoprene than is liquid nitrogen. The experimental values of the solubilities of isoprene in liquid argon and nitrogen were compared with results obtained for selected unsaturated and aromatic hydrocarbons.     

Solubility of Solid 2,3-Dimethylbutane and Cyclopentane in Liquid Argon and Nitrogen at the Standard Boiling Points of the Solvents

The solubilities of solid 2,3-dimethylbutane and cyclopentene in liquid argon at a temperature of 87.3 K and in liquid nitrogen at 77.4 K have been measured by the filtration method. The hydrocarbon contents in solutions were determined using gas chromatography. GC–MS was used to identify impurities in solutes. The experimental value of the mole fraction solubility of solid 2,3-dimethyl-butane in liquid argon at 87.3 K is (8.26 ± 1.60) × 10^–6 and (2.77 ± 0.94) × 10^–8 in liquid nitrogen at 77.4 K. The experimental value of the mole fraction solubility of solid cyclopentene in liquid argon at 87.3 K is (5.11 ± 0.44) × 10^–6 and (4.60 ± 0.76) × 10^–8 in liquid nitrogen at 77.4 K. The Preston–Prausnitz method was used for calculation of the solubilities of solid hydrocarbons in liquid argon in the temperature range 84.0–110.0 K and in liquid nitrogen from 64.0 to 90.0 K. The solvent–solute interaction parameters l ₁₂ were also calculated. At 90.0 K liquid argon is a better solvent for investigated solid hydrocarbons than is liquid nitrogen.     

Kinetics of limonene autooxidation

The kinetic parameters of the oxidizability of Iimonene,k _p/(2k _t)^0.5 = 6.0- 10^–3 L^{0 5} mol^–5 s^–0.5, and of the bimolecular radical decomposition of hydroperoxides 2ek _d = 6.0 · 10^–6 L mol^–1 s^–1 were determined at 60 °C The oxidation rate increases in the presence of micro additives of water. Average effective diameters of particles formed in the water-AOT-(n-decane + lirnonene) microemulsion were measured by the light scattering technique. The hydroperoxides were found to affect the size of the microemulsion particles.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya. No. 7, pp. 1682–1685, July. 1996.     

Taylor dispersion measurements at low electrolyte concentrations. I. Tetraalkylammonium perchlorate aqueous solutions

An equipment for the determination of mutual diffusion coefficients using the Taylor's dispersion technique is described. The radius of the capillary was determined with the help of various calibration methods. Diffusion coefficients of aqueous tetraalkylammonium perchlorates, Me₄NClO₄, and Et₄NClO₄, were measured at 25°C in the concentration range 10^–3 to 5×10^–2 mol-dm^–3, and the slightly soluble Pr₄NClO₄ up to 1×10^–2 mol-dm^–3. The slope of linear plots ofD vs. is in agreement with theory, in contrast to the limiting valuesD ₀, which all deviate by about –5% from the Nernst-Hartley values.     

Kinetics of Chlorohydrination of Allyl Chloride

The chlorohydrination of allyl chloride with chlorine in water was studied at 20–80°C. The effect of the concentration of chloride ions within the range 0–3.6 mol/l on the selectivity of formation of glycerol dichlorohydrins was studied. An equation that relates the selectivity and the concentration of Cl^–was derived, which adequately describes experimental data. The schemes of parallel and consecutive reactions occurring in the system were suggested. The ratios between the rate constants of the following reactions were found: the reactions of chlorine with water and allyl chloride dissolved in water (k ₁/k ₄= 4.1 × 10^–4), the reaction of allyl chloride with hypochlorous acid and the decomposition of hypochlorous acid (k ₂/k ₃= 1.7 × 10³), and the reactions of the allyl chloride–chlorine complex with a water molecule and Cl^–(k ₅/k ₆= 2.9 × 10^–2).     

Polarographic determination of uranium(VI) after salting-out extraction as 8-quinolinolate in acetonitrile

Summary Uranium(VI) can be extracted as its 8-quinolinolate into acetonitrile by means of salting-out with ammonium and sodium acetates, respectively; the metal oxinates extracted give a well-defined dc polarogram with E _1/2=–0.80V and a sharp square wave (sw) polarogram with E _p=–0.96V in the extract. The dc wave height and the sw peak current are directly proportional to the uranium(VI) concentration in the range of 6.0×10^–6 to 4.0×10^–4M at pH 6.7–10.0 and 8.0×10^–7 to 2.8×10^–5M at pH 10.5–11.0, respectively. A number of ions do not interfere in the presence of EDTA.

---

Polarographische Bestimmung von Uran(VI) nach Aussalz-Extraktion als 8-Hydroxychinolat mit Acetonitril

Zusammenfassung Uran(VI) kann durch Aussalzen mit Ammonium- bzw. Natriumacetat als Oxinat mit Acetonitril extrahiert werden. Das extrahierte Oxinat ergibt ein gut ausgebildetes Gleichstrompolarogramm mit E _1/2=–0,80 V bzw. ein scharfes square-wave-Polarogramm mit E _p=–0,96 V. Die Gleichstrom-Stufenhöhe bzw. der square-wave-Peakstrom sind der U(VI)-Konzentration im Bereich 6,0·10^–6-4,0· 10^–4M (pH 6,7–10,0) bzw. 8,0·10^–7-2,8·10 ^–5M (pH 10,5–11,0) direkt proportional. Durch Zusatz von EDTA kann eine Reihe von Störungen ausgeschaltet werden.