An ESCA and NQR study of Me3SbCl2·.SbCl3

The ESCA and NQR spectra of the complex Me₃SbCl_2·SbCl₃ are reported. All the observed NQR transitions of the complex have been assigned and are related to the known cross-linked chain structure. The frequency shifts occurring on complexation of Me₃SbCl₂ with SbCl₃ are explained satisfactorily.     

Reactions of the sterically hindered organosilicon diol (Me3Si)2C(SiMe2OH)2 and some of its derivatives

The diol R₂C(SiMe₂OH)₂ (R = Me₃Si) has been shown to react with: SO₂Cl₂ to give R₂ Me₂; SOCl₂ to give R₂C(SiMe₂Cl)₂; Me₃SiI or Me₃SiCl to give R₂C(SiMe₂OSiMe₃)₂; R′COCl; (R′ = Me or CF₃) to give R₂C(SiMe₂O₂CR′)-(SiMe₂Cl); (R′CO)₂O (R′ = Me or CF₃ to give R₂C(SiMe₂O₂CR′)₂; with MeOH containing acid to give R₂C(SiMe₂OMe)₂; with neutral MeOH to give R₂C-(SiMe₂OMe)₂ and probably R₂ Me₂; MeLi to give R₂C(SiMe₂OLi)₂ (and the latter to react with PhMeSiF₂ to give R₂ Me₂). The diacetate R₂C(SiMe₂O₂CMe)₂ reacts with CsF in MeCN to give R₂C(SiMe₂F)₂; it does not react with NaN₃ or KSCN in MeCN, but the bis(trifluoroacetate) reacts with these salts with KOCN to give R₂C(SiMe₂X)₂ (X = N₃, NCS, NCO).     

Titanium imido complexes containing 1,3,5-triazacyclohexane ligands

The syntheses of the 1,3,5-trimethyl- and tri-tert-butyl-1,3,5-triazacyclohexane-supported imido complexes [M(NR)(R′₃tach)Cl₂] (M = Ti or Zr (NMR only); R = Bu^t or 2,6-C₆H₃Prⁱ₂; R′ = Me or Bu^t) are reported, along with that of the thermally robust dibenzyl derivative [Ti(NBu^t)(Me₃tach)(CH₂Ph)₂]. The tert-butylimido ligand in [Ti(NBu^t)(Me₃tach)Cl₂] undergoes exchange with ArNH₂ (Ar = 4-C₆H₄Me or 2,6-C₆H₄Me or 2,6-C₆H₃Prⁱ₂) to form the corresponding arylimides [Ti(NAr)(Me₃tach)Cl₂]. The Me₃tach ring in [Ti(NR)(Me₃tach)Cl₂] undergoes slow exchange with Bu^t₃tach or Me₃tacn (1,4,7-trimethyl-1,4,7-triazacyclononane) to give the ring-exchanged products [Ti(NR)(Bu^t₃tach)Cl₂] and [Ti(NR)(Me₃tacn)Cl₂], respectively. The complexes [Ti(NR)(Me₃tach)X₂] (R = Bu^t or 2,6-C₆H₃Prⁱ₂; X = Cl or CH₂Ph) exhibit room-temperature dynamic NMR behaviour via an unusual trigonal twist of the facially coordinated Me₃tach ligand, and the activation parameters for these processes have been measured and are discussed. The X-ray structures of [Ti(NR)(Bu^t₃tach)Cl₂] (R = Bu^t or 2,6-C₆H₃Prⁱ₂) and [Ti(NBu^t)(Me₃tach)(X)₂] [X= Cl or CH₂Ph) are reported. Me₃tach and Bu^t₃tach = 1,3,5-trimethyl- and tri-tert-butyl-1,3,5-triazacyclohexane, respectively.     

N,N′-bis(substituted-phenyl)oxamides and their dinuclear pentacoordinate nickel(II) complexes

The preparation, spectroscopic characterization and magnetic study of N,N′-bis(substituted-phenyl)oxamidate-bridged nickel(II) dinuclear complexes of formula {[Ni(N₃-mc)]₂(μ-CONC₆H₄-X)}(PF₆)₂ (N₃-mc = 2,4,4-trimethyl-1,5,9-triazacyclo-dodec-1-ene (Me₃-N₃-mc) or 2,4,4,9-tetramethyl-1,5,9-triazacyclododec-1-ene (Me₄-N₃-mc), X = 2-Cl, 4-Cl, 2-OCH₃, 4-OCH₃) are reported. These paramagnetic nickel(II) complexes have been characterized by both one- and two-dimensional (COSY) ¹H NMR techniques. The COSY spectrum of 5 has allowed to achieve the assignment of the phenyl protons of the N,N′-diphenyloxamidate. The crystal structures of [Ni(Me₃-N₃-mc)(μ-CONC₆H₄-4-Cl)]₂(PF₆)₂ (6), [Ni(Me₃-N₃-mc)(μ-CONC₆H₄-4-OMe)]₂(PF₆)₂ (8) and [Ni(Me₄-N₃-mc)(μ-CONC₆H₄-2-Cl)]₂(PF₆)₂ (9) have been determined and their magnetic properties have been studied. The value of magnetic coupling between the two nickel(II) ions across the oxamidate bridge [J = − 37.6 (6), −39.9 (8) and −39.7 cm⁻¹ (9)] is sensitive to the distortion of the coordination sphere of the metal ions and the topology of the molecular bridge.     

Zur reaktion von metall-koordiniertem kohlenmonoxid mit yliden : XX. “Ylidreaktionen” einfacher dicarbonyl(pentamethylcyclopentadienyl)rutheniumkomplexe

Treatment of the dimer complex [C₅Me₅ (CO)₂ Ru]₂ (1) with HBF₄ in CH₂Cl₂ at room temperature yields the hydrido-bridged dinuclear complex [(C₅Me₅)₂Ru₂(CO)₄H]BF₄ (2), and after refluxing in propionic anhydride [C₅Me₅(CO)₃Ru]BF₄ (5) is obtained, UV-irradiation of 1 in the presence of H₂CHal₂ (Hal = Cl, I) or trimethylphosphine leads to the formation of C₅Me₅(CO)₂Ru-Hal (3a, 3b) or C₅Me₅(CO)(Me₃P)RuH (4) respectively. Exchange reactions of 3a, 3b with LiAlH₄, NaOMe and Me₃ P give the complexes C₅Me₅(CO)₂RuX (6a,6b) (X=H, OMe), C₅Me₅(CO)(Me₃P)Ru-Hal (7a,7b) (Hal = Cl, I) and C₅Me₅(Me₃P)₂RuI (8). The interaction of 3b or 5 with Me₃P=CH₂ leads to the formation of the ylide complex [C₅Me₅(CO)(Me₃P)-RuCH₂PMe₃)Cl (9) or the rutheniumacyl-ylide C₅Me₅(CO)₂RuC(O)CH=PMe₃ (10). 4 reacts with Me₃P=CH₂ to give C₅Me₅(CO)(Me₃P)RuMe (11) and Me₃P via the intermediate formation of the phosphonium salt Me₄P[Ru(CO) (Me₃P)-C₅Me₅].     

Synthesis of mixed diarylgold(III) complexes. Crystal structure of cis-[2-(phenylazo)phenyl][2-{(dimethylamino)methyl}phenyl]gold(III) tetrachloroaurate

The reaction (1 : 1) between [A Me₂)Cl₂] and [Hg(2-C₆H₄-N=NPh)₂] gives the complex [(2-PhN=NC₆H₄)A MeC₂)Cl], which on treatment with AgClO₄ gives [(2-Ph Me₂)]ClO₄. From this complex, the species [(2-PhN=NC₆H₄)A Me₂)X] (X = CH₃COO, CN), or [(2-PhN=NC₆H₄)A Me₂)L] (L = PPh₃, py) are obtained by reaction with the corresponding KX salts or neutral ligands.

The crystal structure of [(2-Ph Me₂)][AuCl₄] (obtained by metathesis between the corresponding perchlorate and tetramethylammonium salts) has been determined; the cation displays square-planar coordination with two cis-nitrogen (Au---N: 2.166(15), 2.140(14) Å) and two cis-carbon (Au---C: 2.021(16), 2.033(17) Å) atoms bonded to the gold atom.     

Organoplatinum(IV) compounds : II. Preparation and characterization of trimethylplatinum(IV) compounds with chelating nitrogen donor ligands. The crystal and molecular structure of iodotrimethyl[bis(3,5-dimethyl-1-pyrazolyl)methane]platinum(IV)

Compounds of the types Me₃PtX(NN) (where X = Cl, I, OAc, NO₃; NN = bis(1-pyrazolyl)methane (pz₂CH₂), bis(3,5-dimethyl-1-pyrazolyl)methane ((Me₂pz)₂CH₂), or bis(2-pyridyl)methane (py₂CH₂)), [Me₃Pt(NNN)][PF₆] (where NNN=tris(1-pyrazolyl)methane (pz₃CH), or tris(2-pyridyl)methane (py₃CH)), and [Me₃Pt((Me₂pz)₂CH₂(py)][PF₆] have been prepared and characterized by elemental analyses and ¹H and ¹³C NMR spectroscopy; the structure of Me₆PtI[(Me₂pz)₂CH₂] (1) has also been determined by X-ray crystallography. Crystals of 1 are orthorhombic, space group Pcmn with four molecules in a unit cell of dimensions a 11.936(5), b 14.462(4), c 10.138(5) Å. The structure was solved by the heavy-atom method and refined by full-matrix least-squares calculations to R = 0.022 for 1719 observed data. The molecule has crystallographic mirror symmetry. The Pt atom has octahedral geometry with one methyl group trans to iodine and two methyl groups trans to the N atoms of the bidentate ligand (Pt---I 2.843(1), Pt---N, 2.236(4), Pt---C 2.077(6) (trans to I) and 2.032(5) Å (trans to N)).     

Photolysis of (Me2Si)6 in argon matrices doped with high concentrations (ca. 20%) of N2O or C2H4O: formation of (Me2SiO)6

Irradiation using a low pressure mercury lamp (λ=ca. 250 nm) of argon matrices containing ca. 1% (Me₂Si)₆ and ca. 20% ethylene oxide (C₂H₄O) or nitrous oxide (N₂O) for a period of ca. 20 h leads to the formation of the cyclic compound (Me₂SiO)₆. This has a 12-membered ring with alternating Si and O atoms. It is identified by comparison of its infrared spectrum with a spectrum of an authentic sample. The reaction appears to proceed by stepwise insertion of O atoms into Si---Si bonds.     

Novel cyclopentadienyl silanes and disilanes: synthesis, structure and gas-phase pyrolysis

The new chloro(cyclopentadienyl)silanes Cp′SiH_yCl_3−y (Cp′=Me₄EtC₅, y=1: 1; Cp′=Me₄C₅H, y=1: 2; y=0: 3; Cp′=Me₃C₅H₂, y=1: 4 and pentachloro(cyclopentadienyl)disilanes Cp′Si₂Cl₅ (Cp′=Me₅C₅ 5, Me₄EtC₅ 6, Me₄C₅H 7, Me₃C₅H₂ 8, Me₃SiC₅H₄ 9) are synthesized in good yields via metathesis reactions. Treatment of 1–9 with LiAlH₄ leads under Cl–H exchange to the hydridosilyl compounds Cp′SiH₃ (Cp′=Me₄EtC₅ 10, Me₄C₅H 11, Me₃C₅H₂ 12) and to the hydridodisilanyl compounds Cp′Si₂H₅ (Cp′=Me₅C₅ 13, Me₄EtC₅ 14, Me₄C₅H 15, Me₃C₅H₂ 16, Me₃SiC₅H₄ 17). Complexes 1–17 are characterized by ¹H, ¹³C, and ²⁹Si-NMR spectroscopy, IR spectroscopy, mass spectrometry and CH-analysis. The structures of 6, 7 and 9 are determined by single-crystal X-ray diffraction analysis. Pyrolysis studies of the cyclopentadienylsilanes 10–12 and disilanes 13–17 show their suitability as precursors in the MOCVD process.     

The reactivity of dimethylaluminum hydride with the aminoarsines Me2AsNMe2, MeAs(NMe2)2, and As(NMe2)3

The reactions of (Me₂AlH)₃ with Me₂AsNMe₂, MeAs(NMe₂)₂, and As(NMe₂)₃ were investigated as a function of time at room temperature and over the temperature range −90 to 24°C by use of ¹H and ¹³C NMR spectroscopy. (Me₂AlH)₃ was found to be very reactive toward the aminoarsines, even at −90°C, and no stable Me₂AlH-aminoarsine adducts were observed. Instead, the initial stages of the reactions involved AS---N bond cleavage with the generation of highly reactive AlN- and AsH-bonded species. The subsequent course of each reaction and the final arsenic-containing product distribution depended upon the original AL:N stoichiometric ratio and the respective aminoarsine. When the Al:N ratio was 1:1, the reactions were straightforward for each aminoarsine. However, in every case, [Me₂AlNMe₂]₂ was the final AlN-containing product. Independent reactions were carried out to verify many of the proposed decomposition pathways that lead to thermodynamically stable products. The results of this study are compared with those of the analogous, previously reported (Me₃Al)₂-aminoarsine systems. Additionally, a new synthetic route to [Me₂AlAsMe₂]₃ has been established from the reaction of (Me₂AlH)₃ with Me₂AsH.     

三(三甲基硅)环戊二烯与六羰基钼的反应

三(三甲基硅)环戊二烯与六羰基钼在二甲苯中回流8h,反应停留在生成中间物η⁵-[(Me₃Si)_NC₅H_5-n]Mo(CO)₃H(n=2,3)(I)的阶段.不经分离,I随即分别与CCl₄·NBS及MeI反应,生成其相应的钼卤化物η-⁵[(Me₃Si)_NC₅H_5-n]Mo(CO)₃X[n=3,X=Cl(1),Br(2),I(3);n=2,X=Cl(4),Br(5),I(6)].4-6是由于茂环上脱掉1个Me₃Si基.经元素分析和IR及¹H NMR谱表征了化合物1-6的结构,并用X射线衍射测定了1的晶体结构.     

Photolysis of hexamethyldisilane at 206 nm

The photolysis of Me₆Si₂ at 206 nm results in two main decomposition processes: simple Si---Si bond breaking with a quantum yield of Φ = 0.21 ± 0.03, and Me₃SiH elimination with the concomitant formation of Me₂SiCH₂ with Φ = 0.18 ± 0.01. There is also a minor decomposition channel with a very small quantum yield, Φ = (5.6 ± 0.2) × 10⁻³, which results in the formation of Me₄Si and Me₂Si. The main fate of the excited Me₆Si₂ molecule produced during photolysis is stabilization by collisional deactivation. The end products observed indicate that the reaction pathways followed by the main intermediates, Me₃Si and Me₂SiCH₂, are the same as those found in the photolysis of Me₄Si (Ahmed et al., J. Photochem. Photobiol. A: Chem. 86 (1995) 33).     

[(Me3Sn)2(Me3Sb)M(CN)6]∞ (M = Fe, Ru): Neuartige Organo-Sn/Sb-Polymere von besonderer chemischer und thermischer stabilität

The thermally (decomp. temp. 300°C) and completely air stable, novel coordination polymers [(Me₃Sn^IV)₂(Me₃Sb^V)M^II(CN)₆]_∞ with M = Fe and Ru can be prepared by co-precipitation from aqueous solutions of Me₃SnCl, Me₃SbBr₂ and K₄[(M(CN)₆], or, alternatively, by the ion-exchange-like reaction of the polymers [A(Me₃Sn)₃M(CN)₆]_∞ (A⁺ = Et₄N⁺, Cp₂Co⁺, Me₃Sn⁺ etc.) with Me₃SbBr₂. IR-spectroscopic findings suggest a statistical distribution of quasi-octahedral M(CN-Sn··)_6-x(CNSb ··)_x building blocks (with x = 0–6) within a three-dimensional network.     

碳锗双桥连二环戊二烯与羰基铁的反应

碳锗双桥连二环戊二烯(Me₂C)(Me₂Ge)(C₅H₄)₂(1)与五羰基铁在回流甲苯及二甲苯中的反应,得到正常的Fe-Fe键化合物(Me₂C)(Me₂Ge)[(η⁵-C₅H₃)Fe(CO)]₂(μ-CO)₂(3)和脱锗桥产物(Me₂C)[(η⁵-C₅H₄)Fe(CO)]₂(μ-CO)₂(4)以及一个结构新颖的化合物(Me₂C)[(η⁵-C₅H₃)[(Me₂Ge)Fe(CO)₂](η¹,η⁵-C₅H₃)[Fe(CO)₂](2).用X射线衍射分析測定了化合物3的晶体结构,并提出了可能的生成机理.     

The nature of the surface site for isocyanate produced in the reaction of ammonia and carbon monoxide over supported catalysts

The reaction of CO and NH₃ was performed over M/X (M=Rh, Ru, Pd; X=Al₂O₃, SiO₂, TiO₂) films. Infrared spectroscopy was used to monitor the formation of surface intermediates. Isocyanate (NCO) was detected for all of the metals when the support was Al₂O₃ or SiO₂, but not for TiO₂. The NCO resided on the Al₂O₃ support for all M/Al₂O₃ catalysts, but on the metal when the support was SiO₂. It was concluded that the formation and location of the NCO was dependent upon the extent of NH₄⁺ formation on the various supports.     

Perfluormethyl-element-liganden : XXXI. Ligandeneigenschaften von Me2PP(CF3)2 und Me2AsP(CF3)2

The coordinating properties of the trifluoromethyl elemental compounds Me₂PP(CF₃)₂ and Me₂AsP(CF₃)₂ have been studied by the synthesis and spectroscopic investigations (IR, NMR, MS) of their complexes cis-M(CO)₄L₂ (A), [(CO)₄ML]₂ (B) and [(CO)₅M]₂L (C) (M = Cr, Mo, W). Complexes of type A with L = Me₂PP(CF₃)₂ are obtained in good yield by reaction with M(CO)₄NBD (NBD = norbornadiene), whereas with L = Me₂AsP(CF₃)₂ the homobinuclear compounds B are formed. The attempt to prepare the cis-M(CO)₄[Me₂AsP(CF₃)₂]₂ complexes by treating M(CO)₄(Me₂AsH)₂ with P₂(CF₃)₄ is successful only for M = W. Binuclear compounds of type B or C, in general, can be prepared by stepwise reaction of the ligands with either M(CO)₄NBD or M(CO)₅THF.     

Complexes of ruthenium(II) and -(III) with dimethylsulphoxide—III. Bis-iodo-tetrakis- dimethylsulphoxide ruthenium(II) and some other iodo complexes of ruthenium(II)

The ruthenium(II) complex [RuI₂(Me₂SO)₄] was synthesized and characterized. The Me₂SO ligands are all S-bonded. Reactions of RuI₂(Me₂SO)₄ with ligands containing P, N and S donor atoms have been carried out and the complexes obtained were characterized using different physical methods. [RuI₂L₄] (L= CH₃CN, Me₂SO and py), [RuI₂(CH₃CN)₂(PPh₃)₂] and [RuI₂(CS)(PPh₃)₃] have been synthesized using RuI₃ as the source material and characterized as above.     

硅桥连双(三甲硅基环戊二烯基)钛化合物的合成及脱硅基反应

硅桥连双(三甲硅基环戊二烯基)双锂盐与TiCl₄·2THF反应,生成相应的钛化合物[E(C₅H₃SiMe₃)₂]TiCl₂[E=Me₂SiSiMe₂(3),Me₂SiOSiMe₂(5)],同时还分离到了脱一个三甲硅基的产物[E(C₅H₄)(C₅H₃SiMe₃)]TiCl₂[E=Me₂SiSiMe₂(4),Me₂SiOSiMe₂(6)].其中四甲基二硅氧桥连配体更容易发生这种脱硅基反应.通过元素分析、MS和¹HNMR谱表征了化合物3-6的分子结构.     

New heterometallic copper zinc alkoxides: synthesis, structure properties and pyrolysis to Cu/ZnO composites

The copper compound [(THF)KCu(O^tBu)₃]_∞ 1 was obtained by interaction of a 1:1 mixture of ZnCl₂/CuCl₂ with KO^tBu. Bi- and trifunctional aminoalcohols were used to synthesize the intramolecularly donor stabilized Cu(II) alkoxides Cu(OCH(R)CH₂NMe₂)₂ (3: R=Me, 4: =CH₂NMe₂) where 4 was structurally characterized. Lewis acid–base adduct formation with (Me₃Si)₃CZnCl gave the heterodinuclear compounds (Me₃Si)₃CZnCl · Cu(OCH(R)CH₂NMe₂)₂ (5: R=Me, 6: R=CH₂NMe₂), which were characterized by X-ray single-crystal structure analysis. The two metal centers Cu and Zn of 5 and 6 are bridged by two oxygen atoms to form a Cu–O–Zn core. Pyrolysis of compounds 5 and 6 in dry argon or a H₂/N₂ mixture at atmospheric pressure forms metallic copper and zinc oxide, whereas pyrolysis under O₂/Ar forms additionally oxidized copper species. Elemental analysis of the pyrolysis products showed carbon and nitrogen contamination. Scanning electron microscopy and energy dispersive X-ray analysis were performed to get information on the morphology and the chemical composition of the pyrolysis products.     

Anchimeric assistance in solvolysis of an organosilicon chloride and acetate

The compound (Me₃Si)₃CSiMeClI reacts with Hg(OAc)₂ in AcOH to give (Me₃Si)₂C(SiMe₂OAc)₂, under conditions in which the chloride (Me₃Si)₃CSiMe₂Cl is inert. Similarly, (Me₃Si)₂C(SiMe₂OAc)₂ reacts with CF₃CO₂H to give (Me₃Si)₂C[SiMe₂(O₂CCF₃)]₂ under conditions in which (Me₃Si)₃CSiMe₂OAc is inert. The results can be accounted for in terms of anchimeric assistance by the neighbouring acetoxy or trifluoroacetoxy group to the breaking of the Si---Cl or Si---OAc bond.