Suppressed coalescence of dispersed viscous poly(methyl methacrylate) phase in polystyrene matrix by glass beads

The effect of glass beads (GB) on morphology of polystyrene (PS)/poly(methyl methacrylate) (PMMA) blends has been studied by scanning electron microscopy (SEM) at different shear rates and during quiescent annealing. For the viscosity ratio of PMMA to PS greater than unity, the dispersed viscous PMMA phase in the blend coalesced during the shear flow or quiescent annealing. However, the domain size of the PMMA phase decreased significantly under shear even though a small amount of GB was added. The PMMA domain size further decreased and the size distribution became narrower with increasing GB content. According to SEM images, the quiescent coalescence of the PMMA phase was effectively inhibited by adding large amounts of GB, and the breakup of PMMA domains in shear flow was greatly favored by the high local shear prevailed between GB. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 25–35, 2009     

Influence of poly(ethylene oxide) brushes on the rheological properties of MgO colloidal suspensions in water

A combined experimental and multiscale simulation study of the influence of polymer brush modification on interactions of colloidal particles and rheological properties of dense colloidal suspensions has been conducted. Our colloidal suspension is comprised of polydisperse MgO colloidal particles modified with poly(ethylene oxide) (PEO) brushes in water. The shear stress as a function of shear rate was determined experimentally and from multiscale simulations for a suspension of 0.48 volume fraction colloids at room temperature for both bare and PEO-modified MgO colloids. Bare MgO particles exhibited strong shear thinning behavior and a yield stress on the order of several Pascals in both experiments and simulations. In contrast, simulations of PEO-modified colloids revealed no significant yielding or shear thinning and viscosity only a few times larger than solvent viscosity. This behavior is inconsistent with results obtained from experiments where modification of colloids with PEO brushes formed by adsorption of PEO-based comb-branched chains resulted in relatively little change in suspension rheology compared to bare colloids over the range of concentration of comb-branch additives investigated. We attribute this discrepancy in rheological properties between simulation and experiment for PEO-modified colloidal suspensions to heterogeneous adsorption of the comb-branch polymers.     

Transient cage formation around hot gold colloids dispersed in polymer solutions

Gold colloids dispersed in dilute to concentrated polymer solutions can efficiently be heated by laser irradiation and act as almost pointlike heat sources. In systems with positive Soret coefficients S(T) of the polymer, such as solutions of polystyrene in toluene, the polymer can almost entirely be removed from the particle surface. The colloid attracts the solvent and a transient cage of low viscosity and dramatically enhanced mobility is formed, which follows the motion of the particle with a certain retardation. Based on a complete parameterization of S(T)(M, c, T), we analyze in detail the stationary temperature, concentration, and viscosity profiles. Depending on the polymer molar mass and concentration on the distance to the glass transition temperature, the negative or positive feedback-loops are established that lead to either attenuation or self-amplification of the polymer depletion.     

Pair interaction potentials of colloids by extrapolation of confocal microscopy measurements of collective suspension structure

A method for measuring the pair interaction potential between colloidal particles by extrapolation measurement of collective structure to infinite dilution is presented and explored using simulation and experiment. The method is particularly well suited to systems in which the colloid is fluorescent and refractive index matched with the solvent. The method involves characterizing the potential of mean force between colloidal particles in suspension by measurement of the radial distribution function using 3D direct visualization. The potentials of mean force are extrapolated to infinite dilution to yield an estimate of the pair interaction potential, U(r). We use Monte Carlo simulation to test and establish our methodology as well as to explore the effects of polydispersity on the accuracy. We use poly-12-hydroxystearic acid-stabilized poly(methyl methacrylate) particles dispersed in the solvent dioctyl phthalate to test the method and assess its accuracy for three different repulsive systems for which the range has been manipulated by addition of electrolyte.     

Temperature-induced gelation in dilute nanofluids

We report a temperature-induced gelation in dilute nanofluids containing surfactant capped iron oxide and alumina particles of average diameter ~10 nm. We observe a dramatic enhancement in the elastic modulus, viscous modulus, and viscosity, by 3-6 orders of magnitude for a volume fraction (φ) less than 0.035, above a critical shear rate ( ?γ(c)) and temperature (T(c)). The T(c) follows a weak power law scaling with φ as T(c) ~ φ(β), where the scaling exponent β is found to be -0.24. The observed gel-like transition at elevated temperature is attributed to strong van der Waals attractions on the kT energy scale due to poor solvent conditions, which is reminiscent of the phase behavior reported in polymer-coated colloids.     

Translational and rotational dynamics of colloidal rods by direct visualization with confocal microscopy

We report an experimental method to characterize the dynamics of colloidal rods by measuring their rotation and translation in three dimensions with confocal microscopy. The method relies on solvent viscosification to retard dynamics to time scales that are compatible with 3D confocal optical microscopy. Because the method yields a full three-dimensional characterization of rod displacement and orientation, it is applicable to situations in which complex, anisotropic dynamics emerge. Examples include behavior in liquid crystal phases with both orientational and positional order, suspensions subjected to applied fields such as shear flow or sedimentation, and the emerging area of anisotropic particle dynamics. We demonstrate the performance of the method by quantifying the Brownian motion of fluorescent poly(methyl methacrylate) rods (aspect ratio, L/D=3.1 and 7.0) grafted with poly(dimethylsiloxane) stabilizer. The rods are dispersed at dilute concentration in a solvent mixture of viscosity 2.0 Pa s. Rod translational and rotational diffusivities are extracted from the measured translational mean square displacement of the centroid positions and of the rod unit vector u(t), respectively. Rod orientational dynamics are characterized relative to both their azimuthal and polar angles. Probability distributions for the translation and rotation in the frame of rod are computed from the measurements. Experimental values obtained agree well with theory available for the dynamics of isolated rods.     

巯基硅溶胶对改性亚麻籽油紫外光固化反应活性的影响

用溶胶-凝胶法制备了新型的多功能巯基硅氧烷溶胶;用亚麻籽油和环戊二烯合成了可光聚合的改性亚麻籽油低聚物(NLO),并用红外光谱(FT-IR)表征了其结构。用光-差示扫描热分析(Photo-DSC)和在线红外(RT-IR)对NLO、巯基硅氧烷的紫外光固化体系的光聚合反应活性及可光聚合官能团的转化率进行了动力学研究。结果表明:巯基硅氧烷能大大提高NLO的自由基聚合速率,环烯键对硫醇十分敏感,巯基硅氧烷溶胶兼具光引发剂和交联剂的作用。     

Rheological,mechanical and morphological properties of thermoplastic vulcanizates based on NR‐g‐PMMA/PMMA blends

Graft copolymer of natural rubber and poly(methyl methacrylate) (NR‐g‐PMMA) was prepared using semi‐batch emulsion polymerization technique via bipolar redox initiation system. It was found that the grafted PMMA increased with the increase of methyl methacrylate (MMA) concentration used in the graft copolymerization. The NR‐g‐PMMA was later used to prepare thermoplastic vulcanizates (TPVs) by blending with PMMA through dynamic vulcanization technique. Conventional vulcanization (CV) and efficient sulphur vulcanization (EV) systems were studied. It was found that the CV system provided polymer melt with lower shear stress and viscosity at a given shear rate. This causes ease of processability of the TPVs via extrusion and injection molding processes. Furthermore, the TPVs with the CV system showed higher ultimate tensile strength and elongation. The results correspond to the morphological properties of the TPVs. That is, finer dispersion of the small vulcanized rubber particles were observed in the PMMA matrix. Various blend ratios of the NR‐g‐PMMA/PMMA blends using various types of NR‐g‐PMMA (i.e. prepared using various percentage molar ratios of NR and MMA) were later studied via dynamic vulcanization by a conventional sulphur vulcanization system. It was found that increasing the level of PMMA caused increasing trend of the tensile strength and hardness properties but decreasing level of elongation properties. Increasing level of the grafted PMMA in NR molecules showed the same trend of mechanical properties as in the case of increasing concentration of PMMA used as a blend component. From morphological studies, two phase morphologies were observed with a continuous PMMA phase and dispersed elastomeric phase. It was also found that more finely dispersed elastomeric phase was obtained with increasing the grafted PMMA in the NR molecules. Copyright © 2005 John Wiley & Sons, Ltd.     

VISCOMETRIC STUDY OF POLY(METHYL METHACRYLATE) AND POLYSTYRENE BLENDS IN DIFFERENT SOLVENTS

The intermolecular interaction between poly(methyl methacrylate) (PMMA) and polystyrene (PS) intetrahydrofuran (THF) and N,N'-dimethyl formamide (DMF) solvents was studied at 28℃ using a dilute solution viscometrymethod. Solvent is believed to play a key role in characterizing the viscosity behavior of the polymer solution. The intrinsicviscosity and viscosity interaction parameter were experimentally measured for the binary (solvent/polymer) and for theternary systems in two solvents. The compatibility of the polymer mixture was discussed in terms of the sign of △b_m. Theresults show that the compatibility of PMMA/PS blend in DMF is larger than that in THF.     

Facile fabrication of self-assembled PMMA/graphene oxide composite particles and their electroresponsive properties

Core–shell-structured poly(methyl methacrylate) (PMMA)/graphene oxide (GO) composite particles were prepared using a facile process, in which GO was adsorbed spontaneously onto a microspherical PMMA surface when hydrophobic microspheres were dispersed in deionized (DI) water stabilized by amphiphilic GO under ultrasonication. The fabricated composite was characterized by SEM, TEM, FT-IR, and thermogravimetric analysis. Results showed that the particle surface could be wrapped with GO without the need for surfactants. In addition, electrorheological behavior of the chain-forming process of the PMMA/GO composite particles was observed by optical microscopy under an applied electric field. Both shear stress and shear viscosity related to the strength of the applied electric field were measured using a rotational rheometer. The proposed Cho–Choi–Jhon model was used to describe their ER performances for the entire shear rate region. Moreover, the response of the shear stress to an imposed square voltage at a fixed shear rate was also examined.     

Synthesis of monodisperse, highly cross-linked, fluorescent PMMA particles by dispersion polymerization

We describe a facile method to synthesize sterically stabilized monodisperse fluorescent poly(methyl methacrylate) (PMMA) colloids in the polar solvent mixture water/methanol with either a core-shell or a homogeneously cross-linked structure by dispersion polymerization. The particles were sterically stabilized by the polymer poly(vinylpyrrolidone) (PVP). The morphology of the particles was controlled by varying the moment at which the gradual addition of cross-linker and dye was started. The absence of these extra agents at a time when the particle nuclei formed reduced the negative effects on this important process to a minimum and produced a core-shell structure, whereas an essentially homogeneously cross-linked fluorescent polymer colloid structure could be obtained by reducing the starting time of the addition of dye and cross-linker to zero. Three different dyes were chemically incorporated into the polymer network. Such dyes are important for the use of the particles in confocal scanning laser microscopy studies aimed at characterizing concentrated dispersions quantitatively in real space. A series of PMMA particles with different sizes were obtained through the variation of the weight ratio of solvents and the content of cross-linker. Furthermore, the swelling properties of the cross-linked PMMA particles in a good solvent (tetrahydrofuran) were investigated. The particles were stable in polar solvents (water and formamide) but could also successfully be transferred to apolar solvents such as decahydronaphthalene (decalin). The PVP stabilizer also allowed the particles to be permanently bonded in flexible strings by the application of an external electric field.     

Viscometric behaviour of polymer blends based on poly (vinylidene fluoride)

The viscosity behaviour of dilute dimethylformamide solutions of poly(vinylidene fluoride)-poly (methyl methacrylate) and poly(vinylidene fluoride)-polystyrene has been studied at 25°C. The polymer concentration ranges are such that neither phase separation nor microgel formation occurs, although we are very close to theta conditions. The intrinsic viscosity and viscosity interaction parameter of the ternary mixtures have been calculated. The estimation of the compatibility of the above polymer pairs has been studied based on: a) specific viscosities; b) viscosity interaction parameters, according to Krigbaum and Wall formalism, and c) viscosity interaction parameters of a system formed by a dilute probe polymer in the presence of a matrix polymer and a small molecule solvent.     

The miscibility of poly(vinyl alcohol)/poly(N-vinylpyrrolidone) blends investigated in dilute solutions and solids

Poly(vinyl alcohol) (PVA) (polymer A) and poly(N-vinylpyrrolidone) (PVP) (polymer B) are known to form a thermodynamically miscible pair. In the present study the conclusion on miscibility of PVA/PVP solid blends, confirmed qualitatively (DMTA, FTIR) and quantitatively (DSC, χ_AB = − 0.69 at 503 K) is compared with the miscibility investigations of PVA/PVP solution blends by the technique of dilute solution viscometry. The miscibility of the ternary (polymer A/ polymer B/ solvent) system is estimated on the basis of experimental and ideal values of the viscosity parameters k, b and [η]. It is found that the conclusions on miscibility or nonmiscibility drawn from viscosity measurements in dilute solution blends depend: (i) on the applied extrapolation method used for the determination of the viscosity interaction parameters, (ii) on the assumed definition of the ideal values and (iii) on the thermodynamic quality of the solvent, which in the case of PVA depends on its degree of hydrolysis. Hence, viscometric investigations of dilute PVA/PVP solution blends have revealed that viscometry, widely used in the literature for estimation of polymer-polymer miscibility can not be recommended as a sole method to presume the miscibility of a polymer pair.     

Particle size dependence of electro-optical switching in ZrP nano colloid

Aqueous colloid of 2-dimensional (2D) α-ZrP nanoparticles can serve as an excellent material for Kerr devices. We investigate the influence of the particle size on the electro-optical switching for isotropic and biphasic α-ZrP colloids that exhibit stable Kerr effect. Smaller sized α-ZrP colloid has wider range of isotropic and biphasic phases, but since the anisotropic polarizability is approximately proportional to square diameter of particles, the larger sized α-ZrP colloid has higher birefringence at a given concentration. The dynamic response time is also dramatically influenced by the particle size. Smaller sized particle has lower viscosity, and the fall time monotonically increases with increasing particle size. However, the rise time has the minimum at around 0.6 μm owing to the competitive contributions of the anisotropic polarizability and the rotational viscosity. Thus, the particle size in α-ZrP colloid is an important factor to determine the electro-optical performance of a Kerr device based on 2D α-ZrP colloids. These findings will be important in developing electro-optical devices using lyotropic liquid crystal colloids.     

Correlation of infinite dilution activity coefficients of solvents in polymer solutions using connectivity indices

In this work, correlations for the estimation of the infinite dilution activity coefficients of non-polar solvents in polystyrene (PS), poly(vinyl acetate) (PVAc), poly(n-butyl methacrylate) (PBMA), poly(dimethyl siloxane), poly(methyl methacrylate) (PMMA), poly(ethylene oxide) (PEO), poly(vinyl chloride) (PVC), polyisobutylene and polyethylene (PE), and that of polar solvents in PS, PVAc, PBMA, PMMA, PEO, PVC and PE are proposed. A total of 205 polymer/non-polar solvent systems with 1708 data points, and 118 polymer/polar solvent systems with 695 data points were used to develop the correlations. The overall average errors were 9.6% and 11.3%, respectively, significantly lower than other predictive models. Since the new correlations require only the connectivity indices of the solvents in the calculations, and the connectivity indices can be calculated easily once the molecular structure of the substance in question is known, they are easy to apply, and are useful for process design and development.     

Synthesis,characterization, and mechanical properties of PMMA/poly(aromatic/aliphatic siloxane) semi-interpenetrating polymer networks

Semi-interpenetrating polymer networks (IPNs) composed of poly(methyl methacrylate) (PMMA) and aromatic/aliphatic siloxanes have been made via sequential and simultaneous polymerizations. As the percentage of aliphatic siloxane increases, flexibility and, in general, toughness of the IPNs increases and clarity is reduced. This loss in clarity is due to the mismatch of refractive indices (1.49 form PMMA vs. 1.43 for aliphatic siloxane). PMMA is quite transparent. On the other hand, in making aromatic siloxane/PMMA IPNs clarity is retained as aromatic siloxane is increased due to better matching refractive index (1.49 for PMMA and −1.49 for poly(diphenyl siloxane)). Gel permeation chromatography (GPC) indicates slightly crosslinked IPNs with the THF soluble portions having number-average molecular weight, M¯_n, of 10⁵–10⁶. NMRs of IPNs essentially show peaks for the components, PMMA and the siloxane, which make up the respective IPNs. ²⁹Si-NMRs indicate cross-linking and grafting. Mechanical properties show increased toughness of IPNs versus PMMA as percentage of siloxane and crosslinker increases, but with a corresponding loss in tensile strength. © 1996 John Wiley & Sons, Inc.     

Rheology of dilute and semidilute suspensions of spherical polyelectrolyte brushes

The viscosity, η, of dilute aqueous suspensions of spherical polyelectrolyte brushes is discussed. The spherical polyelectrolyte brushes consist of a solid polystyrene core of 100-nm diameter onto which linear poly(acrylic acid) chains are grafted. The relative viscosity, η/η_S (η_S is the viscosity of the solvent) of these suspensions is studied as a function of shear rate in the presence of different amounts of added salt. A marked dependence on shear rate is found, in particular when going to higher concentrations. Extrapolation to zero shear rate leads to the relative zero-shear viscosity, η₀/η_S, which can be described in terms of an effective volume fraction, φ_eff, for all salt concentrations under consideration. Moreover, the hydrodynamic radii derived from φ_eff coincide with data obtained by dynamic light scattering in the infinitely dilute regime. Data taken at higher concentrations point to a shrinking of the brush layer owing to mutual interaction.     

Rheological properties of poly(1-trimethylsilyl-1-propyne) solutions

The phase state and rheological properties of poly(1-trimethylsilyl-1-propyne) solutions in toluene and cyclohexane are studied. Samples of poly(1-trimethylsilyl-1-propyne) have the same backbone structure (cis-trans configuration ratio) but different molecular masses. Phase diagrams of these systems are derived via optical interferometry. It is found that they have an upper critical mixing temperature (UCMT) whose value exceeds the boiling points of the individual solvents. The two solvents exhibit limited solubility with respect to the studied polymer, and this parameter decreases with an increase in the molecular mass of the polymer. In the transition from dilute to concentrated solutions, the pattern of the rheological behavior changes from Newtonian to pseudoplastic. The concentration dependences of the zero-shear-rate viscosity of the solutions are typical for flexible-chain polymers. The viscous behavior of the poly(1-trimethylsilyl-1-propyne)-solvent system can be described through a single generalized viscosity-concentration relationship if dimensionless reduced values that take into account the contribution of the molecular mass, the nature of the solvent, and the pattern of intermolecular interactions in the solutions are used as the argument and the function.     

Small-angle neutron scattering on a core-shell colloidal system: a contrast-variation study

Small-angle neutron scattering (SANS) measurements are reported on a sterically stabilized, core-shell colloidal system using contrast variation. Aqueous dispersions of polystyrene particles bearing grafted poly(ethylene glycol) (PEG) have been studied over a large range of particle concentrations and two different solvent conditions for the PEG polymer. SANS data are analyzed quantitatively by modeling the particles as core-shell colloids. In a good solvent and under particle contrast conditions, an effective hard-sphere interaction captures excluded-volume interactions up to high concentrations. Contrast variation, through isotopic substitution of both the core and solvent, expedite a detailed study of the PEG layer, both in the dilute limit and as a function of the particle concentration. Upon diminishing the solvent quality, subtle changes in the PEG layer translate into attractions among particles of moderate magnitude.     

Steric Stabilization of Colloids by Poly(dimethylsiloxane) in Carbon Dioxide: Effect of Cosolvents

Steric stabilization and flocculation of colloids with surface-grafted poly(dimethylsiloxane) (PDMS) chains are examined in liquid and supercritical carbon dioxide with and without hexane as a cosolvent. Neither poly(methyl methacrylate) (PMMA) nor silica particles with grafted 10,000 g/mol PDMS could be stabilized in pure CO(2) at pressures up to 345 bar at 25 degrees C and 517 bar at 65 degrees C without stirring. The addition of 15 wt% hexane to CO(2) led to stable dispersions with sedimentation velocities of 0.2 mm/min for 1-2 μm PMMA particles. The critical flocculation pressure of the colloids in the hexane/CO(2) mixture, determined from turbidity versus time measurements, was found to be the same for silica and PMMA particles and was well above the upper critical solution pressure for the PDMS-CO(2) system. The addition of a nonreactive cosolvent, hexane, eliminates flocculation of PMMA particles synthesized through dispersion polymerization in CO(2) with PDMS-based surfactants. Copyright 2000 Academic Press.