1-乙基-3-甲基咪唑四氟硼酸盐离子液体的量子化学研究

The results of the quantum chemistry study of the ionic liquid 1-ethyl-3-methylimidazolium tetrafluoroborate (EMIM+BF4-) were reported. The ab initio method and density functional theory (B3LYP method) was used to optimize the stable structure of the gas phase ion pair at the level of 6-311++G** basis set, respectively. An IR spectra for EMIM+BF4- were obtained through the vibrational analysis. The changes of atomic charge assignments have been investigated using the Natural Bond Orbital method. The computational results show that there exist hydrogen bonds and other weak interactions between the cation and the anion. Using counterpoise correction method to estimate the basis set superposition error, the interaction energy between the cation and anion is 346.78 kJ/mol.     

1-异丁基-3-甲基咪唑四氟硼酸盐离子液体在呕吐毒素酶联免疫检测中的应用研究

合成了一种水溶性离子液体1-异丁基-3-甲基咪唑四氟硼酸([i-Bmim]BF4),将其用于呕吐毒素(DON)的酶联免疫检测,结果表明,当体系中[i-Bmim]BF4的浓度为0.014 g/mL时,其定量下限为 1.41 μg/L,比不含该离子液体体系的定量下限4.57 μg/L提高了约69%;半数抑制浓度为30.20 μg/L;重复测定多次,其半数抑制浓度平均值为29.71 μg/L,相对标准偏差为3.26%;用T-2毒素代替DON进行了特异性试验,结果显示,不含离子液体体系中DON与T-2毒素、NIV的交叉反应率相对较高(分别为20.1%、14.9%),而含有0.014 g/mL该离子液体体系中DON与T-2毒素、NIV的交叉反应率分别为15.3%、10.2%.方法用于啤酒和麦芽汁中DON加标回收率的测定,实验表明,当体系中[i-Bmim]BF4浓度为0.014 g/mL,DON的加标浓度分别为50、70 mg/L时,其样品加标回收率均为98%,相对标准偏差分别为2.96%、6.02%.     

微波法合成离子液体1-乙基-3-甲基咪唑四氟硼酸盐的研究

离子液体(ionic liquids)是在室温下液态的一种熔融盐,又称为室温离子液体,一般由有机阳离子和无机阴离子或者有机阴离子构成,可以通过调节阴阳离子的种类来改变离子液体的性能,因此敢称为一种"可以设计的溶剂".     

离子液体1-烷基-3-甲基咪唑四氟硼酸盐在水溶液中的聚集行为

采用等温滴定量热法、静态荧光猝灭法和电导法系统研究了典型离子液体1-烷基-3-甲基咪唑四氟硼酸盐([Cnmim][BF₄])在水溶液中的聚集行为, 获得了胶束形成的临界胶束浓度(cmc), 摩尔焓变(ΔH_mic), 摩尔吉布斯自由能变(ΔG_mic), 摩尔熵变(ΔS_mic)以及不同浓度时[Cnmim][BF₄]胶束的平均聚集数等基本参数. 发现这类离子液体的聚集为熵驱动, 阳离子的烷基链越长, ΔG_mic越负, 聚集更容易发生. 此外, 结合[C_nmim]X (X=Cl^-, Br^-)的相关研究发现, 阳离子相同时, 体积越大和疏水性越强的阴离子与头基的结合能力越强, 能有效地降低头基之间的静电排斥, 降低cmc, 利于胶束的形成. 对于[C₁₂mim][BF₄], 添加剂β-环糊精(β-CD)的加入可使cmc增大, ΔH_mic和ΔS_mic减小, 而KBF₄则可使cmc和ΔH_mic减小, ΔS_mic增大.     

甲醇对1-丁基-3-甲基咪唑四氟硼酸离子液体结构与性质影响的模拟研究

采用分子动力学模拟方法研究了298.15 K、0.1 MPa下摩尔分数为0.1-0.9 的甲醇对1-丁基-3-甲基咪唑四氟硼酸盐([BMIM][BF₄])结构与性质的影响. 获得了体系的密度、径向分布函数、配位数、自扩散系数、粘度和电导率, 模拟得到的密度值与实验值符合较好. 结果显示: 体系各组分之间的径向分布函数随甲醇摩尔分数的增加呈规律性变化; 体系内阴阳离子的自扩散系数随着甲醇摩尔分数的增加不断增大; 甲醇的加入削弱了阴阳离子之间的相互作用, 体系粘度随着甲醇摩尔分数的增加逐渐减小, 电导率不断增大. 分析空间分布函数得到体系中各组分的三维空间分布情况.     

1-烷基-3-甲基咪唑氯化物焓变的热重分析

The structures of ionic liquids (ILs) based on 1-alkyl-3-methylimidazolium chloride [C_nmim]Cl (n = 2, 4, 6), (1-ethyl-3-methylimidazolium chloride [C₂mim]Cl, 1-butyl-3-methylimidazolium chloride [C₄mim]Cl, and 1-hexyl-3-methylimidazolium chloride [C₆mim]Cl) were elucidated by ¹H NMR and ¹³C NMR experiments. The vaporization characteristics of these ILs were studied by thermogravimetric analysis. Dynamic and isothermal thermogravimetric experiments were conducted in this study. The purpose of the dynamic experiments was to determine the initial decomposition temperature of the experimental sample and the temperature range for the isothermal thermogravimetric experiments. The purpose of the isothermal experiments was to record the mass dependence of the sample on time in the experimental temperature range. The Langmuir equation and Clausius-Clapeyron equation were used to fit the experimental data and obtain the vaporization enthalpies of these ILs at the average temperature within the experimental temperature range. However, in order to expand the applicability of the estimated values and to compare them with the literature data, the vaporization enthalpy ΔH_vap(T_av) measured at the average temperature was converted into vaporization enthalpy ΔH_vap(298) at ambient temperature. The difference between the heat capacities of the ILs in the gaseous and liquid states at constant pressure, Δ_l^gC_pm^ө proposed by Verevkin, was used in this conversion process. The experimental data for substance density and surface tension at other temperatures were obtained by referring to the literature. In addition, the data for density and surface tension at T = 298.15 K were obtained by applying the extrapolation method to the literature values for other temperatures. The vaporization enthalpy of the 1-octyl-3-methylimidazolium chloride IL [C₈mim]Cl was estimated by using the new vaporization model we had proposed in our previous work and compared with the reference value. The estimated value for [C₈mim]Cl was on the same order of magnitude as the reference value. We compared the vaporization enthalpies in the present study with those for the carboxylic acid imidazolium and amino acid imidazolium ILs ([C_nmim]Pro (n = 2-6) and [C_nmim]Thr (n = 2-6), respectively in our previous work. The results revealed that a change in the anion type affects the vaporization enthalpy of the ILs in the order amino acid imidazolium > carboxylic acid imidazolium > halogen imidazolium, when the cation is the same. Considering the structural differences between the three kinds of ILs, the abovementioned order may be related to the intermolecular hydrogen bonds. There were no intermolecular hydrogen bonds in the [C_nmim]Cl (n = 2, 4, 6) ILs studied here. Therefore, the vaporization enthalpy of [C_nmim]Cl (n = 2, 4, 6) was the lowest among the three kinds of ILs considered.     

EuCl_3在氯化1-丁基-3-甲基咪唑中的电化学性质

应用循环伏安法研究了Eu3+在亲水性离子液体—氯化1-丁基-3-甲基咪唑([BMIM]Cl)中的电极过程.实验表明,工作电极为玻碳电极时,[BMIM]Cl的电化学窗口为-1.7～0.80V(vs.Ag/AgCl).Eu3+在[BMIM]Cl中被还原为Eu2+,此电极反应受电荷迁移和物质扩散共同控制.当体系温度从55℃升高到75℃时,Eu3+在[BMIM]Cl中的扩散系数D从3.75×10-9cm2/s变化到1.32×10-8cm2/s,该反应活化能Ea为62.6kJ/mol.     

1-丁基-3-甲基咪唑碘对染料敏化太阳电池的影响

采用季铵化反应合成了1-丁基-3-甲基咪唑碘([Bmim]I).以此制备了DSCs用液体电解质.通过对比不同浓度的1-丁基-3-甲基咪唑碘、碘化钾、碘,研究其对电池性能的影响.经过优化后,当c_IL=0.9 mol·L^-1、c_KI=0.5 mol·L^-1、c_I2=0.12 mol·L^-1时,所组装的离子液体DSCs在AM1.5,100 mW·cm^-2下,DSCs的短路电流密度为15.97 mA·cm^-2、开路电压为0.71 V、填充因子为0.55、光电转换效率可达6.34%.     

用恒温热重法测定1-己基-3-甲基咪唑苏氨酸离子液体[C6mim][Thr]蒸汽压和蒸发焓

用中和法合成了氨基酸离子液体(AAIL)1-己基-3-甲基苏氨酸盐[C₆mim][Thr],并用核磁共振氢谱(¹H NMR)和核磁共振碳谱(¹³C NMR)进行了表征。以苯甲酸为参考物质,用恒温热重法确定了AAIL[C₆mim][Thr]的蒸汽压和在平均温度下(T_av= 438.15 K)的蒸发焓(Δ^g_lH_m^? (T_av) =128.5 ± 6.0 kJ·mol^-1)。利用Verevkin等人提出的方法计算得到AAIL[C₆mim][Thr]气态和液态的恒压热容差(Δ^g_lC_pm^? = -70.8 J·K^-1·mol^-1),进而计算了不同温度的蒸发焓,其中参考温度(298.15 K)下的蒸发焓Δ^g_lH_m^? (298.15 K) = 138.4 kJ·mol^-1,只比应用我们提出的蒸发焓理论模型估算值大1.6 kJ·mol^-1,小于恒温热重法的实验误差3.0 kJ·mol^-1,说明这个蒸发焓的理论模型有一定的合理性。借助Clausius-Clapeyron方程估算了AAIL[C₆mim][Thr]的假想的正常沸点T_b= 522.07 K,以及沸点的蒸发熵Δ^g_lS_m^? (T_b) = 228.5 J·K^-1·mol^-1,进一步得到了不同温度的蒸发熵和蒸发自由能Δ^g_lG_m^? (T),其结果表明蒸发自由能随着温度的上升而减小,达到沸点温度T_b时变为零,而蒸发熵则随着温度上升而增大,是AAIL[C₆mim][Thr]蒸发过程的驱动力。     

微波辐射一锅法合成1-羧甲基-3-甲基咪唑四氟硼酸离子液体

以N-甲基咪唑为原料,微波辐射一锅法合成了1-羧甲基-3-甲基咪唑四氟硼酸离子液体,其结构经1HNMR和IR表征。     

The Vaporization Enthalpy and Vapor Pressure of (±) N-Ethyl Amphetamine by Correlation Gas Chromatography

The vaporization enthalpy, and vapor pressure as a function of temperature of N-ethylamphetamine, a substance used in the 1950s as an appetite suppressant and more currently abused as a designer drug, is reported. Its physical properties are compared to those of S (+)-N-methamphetamine, a substance whose physiological properties it mimics. A vaporization enthalpy of (62.4 ± 4.4) kJ·mol⁻¹ and vapor pressure of (19 ± 11) Pa at T = 298.15 K has been evaluated by correlation gas chromatography. Results are compared to estimated values and to the limited amount of experimental property data available.     

1-烷基-4-氨基-1,2,4-三唑硝酸盐含能离子液体的蒸气压及其摩尔汽化焓的理论研究

合成了1-烷基-4-氨基-1,2,4-三唑硝酸盐含能离子液体([RATZ]NO₃),并通过核磁和红外进行了结构表征;采用Gaussian09/B3LYP/6-311+G(d,p)密度泛函理论,计算了[RATZ]NO₃的离子间相互作用能及摩尔体积;在298 K-323 K温度范围内,测定了不同配比[RATZ]NO₃-EtOH混合溶液的饱和蒸气压,其中乙醇摩尔分数分别为0.984、0.996、0.999以及1.000。系统研究了[RATZ]NO₃-EtOH混合溶液的饱和蒸气压、[RATZ]NO₃的蒸气压及摩尔汽化焓与温度、离子间相互作用能以及结构之间的关系。结果表明：[RATZ]NO₃-EtOH混合溶液的饱和蒸气压随着温度的升高、离子间作用能的减小以及阳离子体积的增大而增大,其沸点比纯溶剂高,且在298 K-323 K温度范围内[RATZ]NO₃的平衡蒸气压均低于250 mPa,因此说明含能离子液体具有不挥发性,蒸气压极低,并通过理论计算得到的离子间相互作用能及体积,解释了[RATZ]NO₃的摩尔汽化焓随烷基链增长而降低的原因。     

离子液体1-仲丁基-3-甲基咪唑六氟磷酸盐的微波辅助合成、晶体结构及热稳定性

以具有支链结构的溴代仲丁烷作为烷基化试剂, 在微波辐射下采用两步法合成了1-仲丁基-3-甲基咪唑六氟磷酸盐([s-bmim][PF₆])离子液体. 在配比为V(水)∶V(乙醇)∶V(甲苯)=0.16∶2.84∶7的混合溶剂体系中, 培养出晶型完整的长约11 mm的离子液体大单晶体. 通过单晶体X衍射研究了[s-bmim][PF₆]的晶体结构. [s-bmim][PF₆]属于三斜立方晶系, 空间群为P2(1)/m, 晶胞参数为a=0.9042(4) nm, b=0.8213(3) nm, c=0.9775(4) nm, γ=116.618°(6), Z=2, V=64.909(4) nm³, D_c=1.454 g/cm³, μ=0.265 mm^-1, F(000)=292. 在[s-bmim][PF₆]晶体结构中, 阴阳离子间的离子键仍然是主要的, 同时还存在氢键和阳离子-阳离子间的非键斥力作用. 研究结果表明, [s-bmim][PF₆]的支化烷基结构对其晶体有效堆积、熔点、液程范围以及热分解温度等性质具有重要影响.     

Thermochemical properties of 1-butyl-3-methylimidazolium nitrate

Heat capacity for 1-butyl-3-methylimidazolium nitrate [C₄mim][NO₃] in the temperature range (5–370) K has been measured by adiabatic calorimetry. Temperatures and enthalpies of its phase transitions have been determined. Thermodynamic functions have been calculated for the crystalline and the liquid states. Phase transition temperatures for set of nitrate salts have been compared. Enthalpy of combustion and enthalpy of formation for crystalline [C₄mim][NO₃] have been determined using a static-bomb isoperibol combustion calorimeter. A correlation scheme for the estimation of C_p of ionic liquids has been developed.     

离子液体1-丙基-3-甲基咪唑醋酸盐[C_3mim][OAc]蒸气压和蒸发焓的测定及极性预测

<正>~~     

Density and viscosity of 1-butyl-3-methylimidazolium nitrate with ethanol, 1-propanol, or 1-butanol at several temperatures

Densities and viscosities of 1-butyl-3-methylimidazolium nitrate [Bmim][NO₃], and its binaries with alcohol (ethanol, 1-propanol, or 1-butanol) were measured at different temperatures. The densities and viscosities of pure ionic liquid were correlated successfully by empirical equations. The Vogel–Fulcher–Tammann equations can fit the experimental data of viscosities for pure IL. Excess molar volume and viscosity deviations were calculated for the binaries. The excess molar volumes have negative deviations from the ideal solution.     

Use of the ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate in countercurrent chromatography

Room temperature ionic liquids (RTIL) are molten salts that are liquids at room temperature. Their liquid state makes them possible candidates as solvents in countercurrent chromatography (CCC), which uses solvents as both the mobile and stationary phases. The study focuses on 1-butyl-3-methylimidazolium hexafluorophosphate (BMIM PF₆), an easy to synthesize and purify RTIL whose melting point is –8°C. It is shown that BMIM PF₆ behaves like a solvent of significant polarity (comparable with that of ethanol). The ternary phase diagram water–acetonitrile–BMIM PF₆ is given, because it was necessary to add acetonitrile to reduce the ionic liquid viscosity. The 40:20:40% w/w water–acetonitrile–BMIM PF₆ biphasic liquid system was found to be appropriate as a biphasic liquid system for CCC. Different aromatic solutes, including bases, acids, and neutral compounds, were injected into the CCC column to estimate their distribution constants between the ionic liquid-rich phase and the aqueous phase. The resulting K_il/w constants were compared with the corresponding literature octanol–water partition coefficients, K_o/w. The important drawbacks in the use of RTIL in CCC are clearly pointed out: high viscosity producing pressure build-up, UV absorbance limiting the use of the convenient UV detector, and non-volatility precluding the use of the evaporative light-scattering detector for continuous detection.     

室温离子液体EMIES的标准生成焓

在(298.15 ±0.01) K下用转动弹热量计测定了离子液体硫酸乙酯-1-甲基-3-乙基咪唑(EMIES)及合成它的原料1-甲基咪唑的恒容燃烧热,通过计算得到它们的标准燃烧焓 分别为(－2671±2) 和(－286.3±0.5) kJ·mol－1;标准生成焓 分别为(－3060±3) kJ·mol－1和(－2145±4) kJ·mol－1.结合文献上硫酸二乙酯的标准生成焓数据,得到了合成离子液体EMIES的反应热(－102.3±1.0) kJ·mol－1,与合成实验中观察到的强烈放热现象是一致的.根据离子液体EMIES的热容数据,计算了不同温度下EMIES的标准生成焓.