Boronate-containing copolymers: polyelectrolyte properties and sugar-specific interaction with agarose gel

Copolymers of N-acryloyl-m-aminophenylboronic acid (NAAPBA) with acryamide (AA), N,N-dimethylacrylamide (DMAA), and N-isopropylacrylamide (NIPAM) were found to adsorb on cross-linked agarose gel (Sepharose CL-6B) in the pH range from 7.5-9.2, due to specific boronate-sugar interactions. The molar percentages of phenylboronic acid (PBA) groups in the boronate-containing copolymers (BCCs), as estimated by 1H NMR spectroscopy, were 13, 10, and 16%, respectively, whereas the apparent ionization constants, the pKa values, of the copolymers were similar and equal to 9.0 +/- 0.2 at 20 degrees C. The copolymers adsorption capacities were in the range of 15-30 mg x ml(-1) gel (14-36 micromol pendant PBA ml(-1) gel) at pH 9.2 and decreased with decreasing pH value. The interaction of monomeric NAAPBA with Sepharose CL-6B was characterized by an equilibrium association constant of 53 +/- 17 M(-1), the chromatographic capacity factor k' = 1.8, and a total content of binding sites of 27 +/- 10 micromol x ml(-1) gel at pH 9.2. The weak reversible binding of monomeric NAAPBA and almost irreversible binding of NAAPBA copolymers to the gel at pH 9.2 suggested a multivalent character of the copolymer adsorption. At pH 7.5, the maximal adsorption capacity was displayed by the AA-NAAPBA copolymer (15 mg x ml(-1) gel). All the BCCs could be completely desorbed from the gel by 0.1 M fructose in aqueous buffered media with pH values from 7.5-9.2. The strong adsorption of AA-NAAPBA on agarose gel probably relates to the conformation of the copolymer in aqueous solution and provides opportunities for biomedical applications of the copolymer under physiological conditions. Multivalent, weak-affinity adsorption of BCCs to the agarose gel seems to be a tentative model for the copolymers' binding to oligo- and polysaccharides of cell membranes and mucosal surfaces.     

New alpha-amino phenylalanine tetrazole ligand for immobilized metal affinity chromatography of proteins

A new chelating compound has been developed for use in the immobilized metal affinity chromatographic (IMAC) separation of proteins. The bidentate ligand, alpha-amino phenylalanine tetrazole, 4, was synthesized via a five-step synthesis from N-fluorenylmethoxycarbonyl phenylalanine and then immobilized onto silica through the epoxide coupling procedure. The binding behavior of the resulting IMAC sorbent, following chelation with Zn2+ to a density of 183 micromol Zn2+ ions/g silica, was characterized by the retention of proteins in the pH range of 5.0-8.0, and by the adsorption behavior of lysozyme with frontal chromatography at pH 6.0 and 8.0. The prepared column showed the separation ability to four test proteins and the retention time of these proteins increased with an increase in pH. From the derived isotherms, the adsorption capacity, qm, for the binding of lysozyme to immobilized Zn2+-alpha-amino phenylalanine tetrazole-silica was found to be 1.21 micromol/g at pH 6.0 and 1.20 micromol/g sorbent at pH 8.0, respectively, whilst the dissociation constants KD at these pH values were 5.22x10(-6) and 3.49x10(-6) M, respectively, indicating that the lysozyme was retained more stable under alkaline conditions, although the binding capacity in terms of micromole protein per gram sorbent remained essentially unchanged.     

Differential interactions of plasmid DNA, RNA and endotoxin with immobilised and free metal ions

Separation of negatively charged molecules, such as plasmid DNA (pDNA), RNA and endotoxin forms a bottleneck for the development of pDNA vaccine production process. The use of affinity interactions of transition metal ions with these molecules may provide an ideal separation methodology. In this study, the binding behaviour of pDNA, RNA and endotoxin to transition metal ions, either in immobilised or free form, was investigated. Transition metal ions: Cu2+, Ni2+, Zn2+, Co2+ and Fe3+, typically employed in the immobilised metal affinity chromatography (IMAC), showed very different binding behaviour depending on the type of metal ions and their existing state, i.e. immobilised or free. In the alkaline cell lysate, pDNA showed no binding to any of the IMAC chemistries tested whereas RNA interacted significantly with Cu2+-iminodiacetic acid (IDA) and Ni2+-IDA but showed no substantial binding to the rest of the IMAC chemistries. pDNA and RNA, however, interacted to varying degrees with free metal ions in the solution. The greatest selectivity in terms of pDNA and RNA separation was achieved with Zn2+ which enabled almost full precipitation of RNA while keeping pDNA soluble. For both immobilised and free metal ions, ionic strength of solution affected the metal ion-nucleic acid interaction significantly. Endotoxin, being more flexible, was able to interact better with the immobilised metal ions than the nucleic acids and showed binding to all the IMAC chemistries. The specific interactions of immobilised and/or free metal ions with pDNA, RNA and endotoxin showed a good potential, by selectively removing RNA and endotoxin at high efficiency, to develop a simplified pDNA purification process with improved process economics.     

Affinity adhesion of carbohydrate particles and yeast cells to boronate-containing polymer brushes grafted onto siliceous supports

Cross-linked agarose particles (Sepharose CL-6B) and baker's yeast cells were found to adhere to siliceous supports end-grafted with boronate-containing copolymers (BCCs) of N,N-dimethylacrylamide at pH> or =7.5, due to boronate interactions with surface carbohydrates of the particles and the cells. These interactions were registered both on macroscopic and on molecular levels: the BCCs spontaneously adsorbed on the agarose gel at pH> or =7.5, with adsorption increasing with pH. Agarose particles and yeast cells stained with Procion Red HE-3B formed stable, monolayer-like structures at pH 8.0, whereas at pH 7.0-7.8 the structures on the copolymer-grafted supports were less stable and more random. At pH 9.0, 50 % saturation of the surface with adhering cells was attained in 2 min. Stained cells formed denser and more stable layers on the copolymer-grafted supports than they did on supports modified with self-assembled organosilane layers derivatized with low-molecular-weight boronate, presumably due to a higher reactivity of the grafted BCCs. Quantitative detachment of adhered particles and cells could be achieved by addition of 20 mM fructose--a strong competitor for binding to boronates--at pH 7.0-9.0. Regeneration of the grafted supports allowed several sequential adhesion and detachment cycles with stained yeast cells. Affinity adhesion of micron-sized carbohydrate particles to boronate-containing polymer brushes fixed on solid supports is discussed as a possible model system suggesting a new approach to isolation and separation of living cells.     

Selective solid phase extraction of trace Sc(III) from environmental samples using silica gel modified with 4-(2-morinyldiazenyl)-N-(3-(trimethylsilyl)propyl)benzamide

In this study, a new 4-(2-morinyldiazenyl)-N-(3-(trimethylsilyl)propyl)benzamide modified silica gel (SG-MTPB) sorbent was prepared and characterized by FT-IR spectroscopy and studied for separation and preconcentration of Sc(III) prior to its determination by inductively coupled plasma atomic emission spectrometry (ICP-AES). Experimental conditions for effective adsorption of trace Sc(III) were optimized using both batch and column procedures. At pH 3, Sc(III) could be quantitatively adsorbed on the new sorbent. And the adsorbed Sc(III) could be completely eluted by using 2 mL of 6 mol L(-1) of HCl+2% CS(NH(2))(2). Most common coexisting ions did not interfere with the separation and preconcentration of Sc(III) at optimal conditions. The maximum static adsorption capacity of the sorbent for Sc(III) was 600 micaromol g(-1) while the time of 95% adsorption was less than 2 min. The detection limit of present method was found to be 0.085 micarog g(-1), and the relative standard deviation (R.S.D.) was lower than 1.3%. The method was also successfully applied to the preconcentration of trace Sc(III) in the environmental samples with satisfactory results.     

Preconcentration of metal ions on porphyrin-modified sorbents as pretreatment step in AAS determination

The preconcentration of some divalent metal ions by complexation with carboxyphenylporphyrin (TCPP) and retention on conventional anion-exchange resins and a non-ionic sorbent was examined. Two different procedures--ligand in solution or immobilised on the solid sorbents--were evaluated as a function of pH. The selectivity order for metal ions on the TCPP-loaded resin Amberlite IRA-904 was established as: Pb(II)>Ni(II)>Cu(II)>Cd(II)>Mg(II).     

A selective fluorescent sensor for Pb(II) in water

A new fluorescent sensor (1) containing bis(2-pyridylmethyl)amine group as a binding moiety for Pb²⁺ was developed. Compound 1 shows selective response to Pb²⁺ over other metal ions in pH 7.0 HEPES buffer solution. The fluorescence intensity enhancement was ascribed to the complex formation between Pb²⁺ and 1 which blocked the photo-induced electron transfer process.     

Selective enrichment of trace copper(II) from biological and natural water samples by SPE using ion-imprinted polymer

A novel Cu(II)-imprinted polymer sorbent was prepared by an ion-imprinted polymer (IIP) technique using (2Z)-N,N'-bis(2-aminoethylic)but-2-enediamide as the functional monomer and pentaerythritol triacylate as a crosslinker. IR, XPS, and elemental analysis techniques were used to confirm the obtained product. Subsequently, when this polymer was used as sorbent in SPE, it exhibited excellent selectivity for template ion from an aqueous solution. Quantitative extraction of Cu(II) was achieved in the pH range of 4-7. The time needed to extract each sample was less than 30 min by the batch method. The distribution ratio (D) values of IIP for Cu(II) were greatly larger than that for other ions. At optimal pH value, the maximum extraction capacity of IIP and nonimprinted polymer (NIP) was found to be 29.8 and 7.0 mg/g, respectively. The adsorption behavior of Cu(II) on the sorbents could be described by Langmuir adsorption isotherm equation. The feasible flow rate of Cu(II)-containing solution for quantitative extraction onto the column packed with IIP was 1-4 mL/min, whereas for elution it was less than 1 mL/min. The developed method was successfully applied to the separation and enrichment of trace Cu(II) in biological and natural water samples with satisfactory results.     

Thermosensitive copolymers of N-vinylimidazole as displacers of proteins in immobilised metal affinity chromatography

Synthetic copolymers of N-vinylcaprolactam (VCL) and N-vinylimidazole (VI) were studied as thermosensitive, reusable displacers for immobilised metal affinity chromatography (IMAC) of proteins. The copolymer with weight-average molecular mass of 11700 g/mol prepared by free radical polymerisation at a 9:1 monomer molar ratio was separated into several fractions by IMAC and thermal precipitation. The fraction with an average VI content of 8.5% was most efficient as a reusable displacer for IMAC of ovalbumin, lysozyme and other proteins of egg white on Cu2+-IDA-Sepharose. The displacer exhibited a sharp breakthrough curve and binding capacity of 16-20 mg/ml gel, depending on the flow-rate. The recovery of egg white proteins in the course of displacement chromatography was >95%. The displacer could be removed quantitatively from the protein fractions by thermal precipitation at 48 degrees C. Co-precipitation of lysozyme with the displacer was minimal in the presence of 3% (v/v) acetonitrile, while the lysozyme enzymatic activity in the supernatant was completely retained. Addition of free imidazole to the mobile phase increased the rate of protein desorption and allowed better separation of egg white proteins and the displacer in the course of chromatography. The displacement profile of the egg white extract consisted of three zones with different distributions of individual proteins characterised by SDS-PAGE. Regeneration of the column was easily performed with 0.02 M EDTA in 0.15 M sodium chloride, pH 8.0, followed by washing with distilled water and reloading with Cu2+. The displacer could also be regenerated by thermal precipitation at 48 degrees C and subsequent dialysis against dilute hydrochloric acid (pH 2.5).     

Three Alginate Lyases from Marine Bacterium <Emphasis Type="Italic">Pseudomonas fluorescens</Emphasis> HZJ216: Purification and Characterization

Three alginate lyases (A, B, and C) from an alginate-degrading marine bacterium strain HZJ216 isolated from brown seaweed in the Yellow Sea of China and identified preliminarily as Pseudomonas fluorescens are purified, and their biochemical properties are described. Molecular masses of the three enzymes are determined by SDS-PAGE to be 60.25, 36, and 23 kDa with isoelectric points of 4, 4.36, and 4.59, respectively. Investigations of these enzymes at different pH and temperatures show that they are most active at pH 7.0 and 35 °C. Alginate lyases A and B are stable in the pH range of 5.0–9.0, while alginate lyase C is stable in the pH range of 5.0–7.0. Among the metal ions tested, additions of Na⁺, K⁺, and Mg²⁺ ions can enhance the enzyme activities while Fe²⁺, Fe³⁺, Ba²⁺, and Zn²⁺ ions show inhibitory effects. The substrate specificity results demonstrate that alginate lyase C has the specificity for G block while alginate lyases A and B have the activities for both M and G blocks. It is the first report about extracellular alginate lyases with high alginate-degrading activity from P. fluorescens.     

Characterisation by immobilised metal ion affinity chromatographic procedures of the binding behaviour of several synthetic peptides designed to have high affinity for Cu(II) ions.

In this investigation, several peptides containing an increasing number of histidine residues have been designed and synthesised. The peptides involved repeat units of either the pentameric EAEHA or the tetrameric HLLH sequence motifs. Adsorption isotherms for these synthetic peptides and hexahistidine (hexa-His) as a control substance were measured under batch equilibrium binding conditions with an immobilised Cu(II)-iminodiacetic acid (IDA) sorbent. The experimental data were analysed in terms of Langmuirean binding behaviour. In common with previous studies with synthetic peptides, these investigations have demonstrate that the sequential organisation of the histidine side chains in these peptides can affect the selectivity of the coordination interactions with borderline metal ions in immobilised metal ion affinity chromatographic systems. The results also confirm that peptides selected on the basis of their potential to form amphipathic secondary structures with their histidine residues presented on one face of the molecule can exhibit equivalent or higher affinity constants towards copper ions than hexa-His, although they contain fewer histidine residues. These findings are thus relevant to the selection of peptides produced inter alia by combinatorial synthetic procedures to have enhanced binding properties for Cu(II) or Ni(II) ions, or intended for use as peptide tags in the fusion handle approach for the affinity chromatographic purification of recombinant proteins.     

Oxidative DNA cleavage promoted by multinuclear copper complexes: activity dependence on the complex structure

Polynuclear copper complexes with two or three Cu(BPA) (BPA, bis(2-pyridylmethyl)amine) motifs, [Cu2(mTPXA)Cl4]3 H2O (1), [Cu2(pTPXA)Cl4]3 H2O (2), [Cu3(HPTAB)Cl5]Cl3 H2O (3) (mTPXA = N,N,N',N'-tetra-(2-pyridylmethyl)-m-xylylene diamine; pTPXA = N,N, N',N'-tetra-(2-pyridylmethyl)-p-xylylenediamine; HPTAB = N,N,N',N',N',N'-hexakis(2-pyridylmethyl)-1,3,5-tris-(aminomethyl)benzene) have been synthesized and characterized. The crystal structures of compounds 2 and 3 showed each Cu(BPA) motif had a 4+1 square-pyramidal coordination environment with one chloride occupying the apical position and three N atoms from the same BPA moiety together with another Cl atom forming the basal plane. Fluorescence and circular dichroism (CD) spectroscopy studies indicated that the DNA binding followed an order of 3>2>1 in the compounds. These complexes cleave plasmid pUC19 DNA by using an oxidative mechanism with mercaptopropionic acid (MPA) as the reductant under aerobic conditions. Dinuclear Cu2+ complexes 1 and 2 showed much higher cleavage efficiency than their mononuclear analogue [Cu(bpa)Cl2] at the same [Cu2+] concentration, suggesting a synergistic effect of the Cu2+ centers. Moreover, the meta-dicopper centers in complex 1 facilitated the formation of linear DNA. Interestingly, the additional copper center to the meta-dicopper motif in complex 3 decreased the cleavage efficacy of meta-dicopper motif in complex 1, although it is able to cleave DNA to the linear form at higher [Cu2+] concentrations. Therefore, the higher DNA binding ability of complex 3 did not lead to higher cleavage efficiency. These findings have been correlated to the DNA binding mode and the ability of the Cu2+ complexes to activate oxygen (O2). This work is a good example of the rational design of multinuclear Cu2+ artificial nuclease and the activity of which can be manipulated by the geometry and the number of metal centers.     

Preparation and some properties of a polyethyleneimine-agarose metal adsorbent

An adsorbent for metal ions has been prepared by reacting high molecular weight polyethyleneimine (PEI) with a crosslinked and activated agarose gel, Novarose. The synthesis variables, i.e. time, temperature, pH, PEI concentration and PEI/Novarose ratio, were optimized in order to obtain a high metal binding capacity of the adsorbent. The binding capacity for Cu(2+) is 500 micromol/ml packed adsorbent. A number of properties of the adsorbent relevant for metal ion accumulation has been investigated for Cu(2+), Ni(2+), Cd(2+) and Zn(2+). Adsorption capacities, adsorption isotherms, distribution coefficients, recoveries and relative rates of accumulation were determined. The adsorbent can be used for preconcentration and for separation of interfering alkali and alkaline earth metals in analytical applications.     

Solid-phase extraction of trace Cu(II) Fe(III) and Zn(II) with silica gel modified with curcumin from biological and natural water samples by ICP-OES

Silica gel was firstly functionalized with aminopropyltrimethoxysilane obtaining the aminopropylsilica gel (APSG). The APSG was reacted subsequently with curcumin yielding curcumin-bonded silica gel (curcumin-APSG). This new bonded silica gel was used for separation, pre-concentration and determination of Cu(II), Fe(III), Zn(II) in biological and natural water samples by inductively coupled plasma optical emission spectrometry (ICP-OES). Experimental conditions for effective adsorption of trace levels of metal ions were optimized with respect to different experimental parameters using batch and column procedures in detail. The optimum pH value for the separation of metal ions simultaneously on the newly sorbent was 4.0. Complete elution of the adsorbed metal ions from the sorbent surface was carried out using 2.0 mL of 0.1 mol L^− 1 of HCl. Common coexisting ions did not interfere with the separation and determination at pH 4.0. The maximum static adsorption capacity of the sorbent at optimum conditions was found to be 0.63, 0.46 and 0.37 mmol g^− 1 for Cu(II), Fe(III) and Zn(II) respectively. The time for 95% sorption for Cu(II) Fe(III) and Zn(II) was less than 2 min. The detection limits of the method defined by IUPAC was found to be 0.12, 0.15 and 0.40 ng mL^− 1 for Cu(II), Fe(III) and Zn(II), respectively. The relative standard deviation (RSD) of the method under optimum conditions was lower 3.0% (n = 5). The procedure was validated by analyzing the certified reference river sediment material (GBW 08301, China), the results obtained were in good agreement with standard values. This sorbent was successfully employed in the separation and pre-concentration of trace Cu(II), Fe(III) and Zn(II) from the biological and natural water samples yielding 75-fold concentration factor.     

Adsorption and selectivity characteristics of several human serum proteins with immobilised hard Lewis metal ion-chelate adsorbents

In this investigation, human serum has been used as an example of a crude protein mixture to define the protein binding characteristics and selectivity of several immobilised hard Lewis metal ion affinity chromatographic (IMAC) adsorbents. Specifically, the binding properties of immobilised O-phosphoserine (im-OPS) and 8-hydroxyquinoline (im-8-HQ), with immobilised iminodiacetic acid as a control system, have been investigated in combination with the hard Lewis metal ions, Al3+, Ca2+, Fe3+, Yb3+, and the borderline metal ion, Cu2+, over the pH range pH 5.5 to pH 8.0 with buffers of 0.5 M ionic strength. The same IMAC adsorbents were also investigated for their protein binding capabilities with buffers of an ionic strength of 0.06 M at pH 5.5 and pH 8.0. The binding behaviour of four "marker" proteins, namely transferrin, alpha2-macroglobulin, gammaglobulin and human serum albumin have furthermore been employed to monitor the differences in protein selectivity exhibited by these IMAC systems. The experimental findings confirm that these hard Lewis metal ion IMAC adsorbents function in a "mixed" binding mode with both coordination and electrostatic characteristics evident, depending on the ionic strength and pH of the equilibration or elution buffers. Based on a screening protocol, several members of the im-Mn+-8-HQ and im-Mn+-OPS adsorbent series have been identified with high selectivity for transferrin and alpha2-macroglobulin. These hard Lewis metal ion IMAC adsorbents thus provide attractive alternatives for selective fractionation of human serum proteins.     

Preparation of morin modified nanometer SiO<Subscript>2</Subscript> as a sorbent for solid-phase extraction of trace heavy metals from biological and natural water samples

Morin was successful as a chemical modifier to improve the reactivity of the nanometer SiO₂ surface in terms of selective binding and extraction of heavy metal ions. This new functionalized nanometer SiO₂ (nanometer SiO₂-morin) was used as an effective sorbent for the solid-phase extraction (SPE) of Cd(II), Cu(II), Ni(II), Pb(II), Zn(II) in solutions prior to its determination by inductively coupled plasma atomic emission spectrometry (ICP-AES). Experimental conditions for effective adsorption of trace levels of metal ions were optimized with respect to different experimental parameters using static and dynamic procedures in detail. The pH 4.0 was chosen as the optimum pH value for the separation of metal ions on the newly sorbent. Complete elution of the adsorbed metal ions from the nanometer SiO₂-morin was carried out using 2.0 mL of 0.5 mol L⁻¹ of HCl. Common coexisting ions did not interfere with the separation and determination at pH 4.0. The maximum static adsorption capacity of the sorbent at optimum conditions was found to be 22.36, 36.8, 40.37, 33.21 and 25.99 mg metal/g SiO₂-morin for Cd(II), Cu(II), Ni(II), Pb(II) and Zn(II), respectively. The time for 95% sorption for Cu(II) and Ni(II) and 70% sorption for Cd(II), Pb(II) and Zn(II) was less than 2 min. The relative standard deviation (RSD) of the method under optimum conditions was lower than 5.0% (n = 11). The procedure was validated by analyzing the certified reference river sediment material (GBW 08301, China), the results obtained were in good agreement with standard values. The nanometer SiO₂-morin was successfully employed in the separation and preconcentration of trace Cd(II), Cu(II), Ni(II), Pb(II) and Zn(II) from the biological and natural water samples yielding 75-folds concentration factor.     

Simultaneous purification and reversible immobilization of d-amino acid oxidase from Trigonopsis variabilis on a hydrophobic support

Purification and reversible immobilization of d-amino acid oxidase from Trigonopsis variabilis could be simultaneously accomplished by hydrophobic interaction on Phenyl Sepharose CL-4B in the presence of 50 mM pyrophosphate buffer (pH 8.5). The presence of a high salt concentration of 2M, which is generally required for the hydrophobic interactions, was not essential for the hydrophobic immobilization. The enzyme in free as well as immobilized form was optimally active between pH 7.0 and 9.0. The immobilized preparation could be reused in a batch process for the conversion of d-amino acids to α-keto acids. When the activity of the preparation dropped below practical limits, the gel could be regenerated by water wash and recharged with fresh crude extract from yeast.     

Synthesis, characterization, and sorption properties of silica gel-immobilized Schiff base derivative

Silica gel was derivatized with benzophenone 4-aminobenzoylhydrazone (BAH), a Schiff base derivative, after silanization of silica by 3-chloropropyltrimethoxysilane (CPTS) by using a reported method. Characterization of the surface modification was confirmed through infrared spectroscopy, thermogravimetry, and elemental analysis. The immobilized surface was used for Cu(II), Ni(II), Zn(II), and Co(II) sorption from aqueous solutions. The influence of the amount of sorbent, ion concentration, pH, and temperature was investigated. The sorption data followed Langmuir, Freundlich, and Dubinin-Radushkevich (D-R) isotherms. The mean sorption energy (E) of benzophenone 4-aminobenzoylhydrazone (BAH) immobilization onto silica gel was calculated from D-R isotherms, indicating a chemical sorption mode for four cations. Thermodynamic parameters, i.e., DeltaG, DeltaS, and DeltaH, were also calculated for the system. From these parameters, DeltaH values were found to be endothermic: 27.0, 22.7, 32.6, and 34.6 kJ mol(-1) for Cu(II), Ni(II), Co(II), and Zn(II) metal ions, respectively. DeltaS values were calculated to be positive for the sorption of the same sequence of divalent cations onto sorbent. Negative DeltaG values indicated that the sorption process for these three metal ions onto immobilized silica gel is spontaneous.     

Effect of oxidation of activated carbon on its enrichment efficiency of metal ions: comparison with oxidized and non-oxidized multi-walled carbon nanotubes

The effect of oxidation of activated carbon (AC) with various oxidizing agents (nitric acid, hydrogen peroxide, ammonium persulfate) on preconcentration of metal ions (Cr3+, Mn2+, Pb2+, Cu2+, Cd2+ and Zn2+) from environmental waters prior to their flame atomic absorption spectroscopic analysis was investigated. The highest recoveries and adsorption capacities towards metal ions were achieved when using nitric acid-oxidized AC (sorbent AC-NA) as preconcentrating sorbent at pH 9. A preconcentration procedure was optimized using AC-NA as sorbent, which was then compared with non-oxidized AC in terms of analytical performance of the preconcentration method. Higher sensitivity, lower detection limits and wider linear ranges were achieved when AC-NA was used. The analytical performance of the method using AC-NA as preconcentrating sorbent was also compared with nitric acid-oxidized multi-walled carbon nanotubes (sorbent MWCNT-NA) and non-oxidized multi-walled carbon nanotubes (sorbent MWCNT). The analytical performance of the preconcentration method using AC-NA was close to MWCNT-NA, but AC-NA was better than non-oxidized MWCNT. Application of the optimized preconcentration method (using AC-NA sorbent) to environmental waters (tap water, reservoir water, stream water) gave spike recoveries of the metals in the range 63-104%.     

Concentration of carbon dioxide by electrochemically modulated complexation with a binuclear copper complex

The reactions of bicarbonate ion with a series of binuclear Cu(II) complexes in buffered aqueous solution have been studied, and effective binding constants for bicarbonate have been determined at pH 7.4 for the complexes [Cu2(taec)]4+ (taec = N,N',N',N'-tetrakis(2-aminoethyl)-1,4,8,11-tetraazacyclotetradecane) and [Cu2(tpmc)(OH)]3+ (tpmc = N, N',N',N'-tetrakis(2-pyridylmethyl)-1,4,8,11-tetraazacyclotetradecane). [Cu2(o-xyl-DMC2)]4+ (o-xyl-DMC2 = alpha,alpha'-bis(5,7-dimethyl-1,4,8,11-tetraazacyclotetradecan-6-yl)-o-xylene) did not react with bicarbonate ion in an aqueous solution buffered at this pH. The complexes were reduced by controlled-potential electrolysis, and the stability of the Cu(I) derivatives in aqueous solution and their affinity for bicarbonate/carbonate ion were investigated. On the basis of these fundamental studies, [Cu2(tpmc)(mu-OH)]3+ has been identified as an air-stable, water-soluble carrier for the capture and concentration of CO2 by electrochemically modulated complexation. The carrier binds to the carbonate ion strongly in its oxidized, Cu(II) form and releases the ion rapidly when reduced to the Cu(I) complex. In small-scale electrochemical pumping experiments designed to demonstrate the feasibility of this approach, CO2 has been pumped from an initial 10% CO2/N2 mixture up to a final concentration of 75%.