层状结构材料Ni2P2S6的室温固相合成与表征

通过室温固相反应合成了Ni₂P₂S₆层状结构材料,并经XRD和Raman光谱进行了表征.与传统的高温固相反应法相比较,该法具有反应速度快、能耗低、可得均相产物的优点.TG-DTA研究表明,Ni₂P₂S₆在空气中热氧化的终产物为Ni₂P₂O₇,中间态可能是Ni₂P₂O₆亚稳相.     

Tetrameric,trititanium(IV)-substituted polyoxotungstates with an alpha-Dawson substructure as soluble metal-oxide analogues: molecular structure of the giant "tetrapod" [(alpha-1,2,3-P2W15Ti3O62)4[mu3-Ti(OH)3]4Cl]45-

The preparation and structural characterization of the novel polyoxoanion [(alpha-1,2,3-P(2)W(15)Ti(3)O(62))(4)[mu(3)-Ti(OH)(3)](4)Cl](45-) (1 a; abbreviated to [TiO(6)](16); FW approximately 16 000) which consists of four tri-Ti(IV)-1,2,3-substituted alpha-Dawson substructures, four Ti(OH)(3) bridging groups, and one encapsulated Cl(-) ion, are described. A water-soluble, all-inorganic composition compound of the tetrameric Ti-O-Ti-bridged anhydride form, Na(x)H(45-x)[1 a].y H(2)O (1; x=16-19, y=60-70), which was afforded by the reaction of the tri-lacunary Dawson polyoxotungstate Na(12)[B-alpha-P(2)W(15)O(56)].19 H(2)O with an excess of TiCl(4) in aqueous solution, was obtained as analytically pure, homogeneous colorless crystals. Single-crystal X-ray structure analysis revealed that 1 a was an inorganic, giant "tetrapod"-shaped molecule (inscribed to a sphere with a diameter of approximately 32 A) with approximately T(d) symmetry, in which the 16 edge- and/or corner-shared TiO(6) octahedra were contained. This number of TiO(6) octahedra was larger than that found in other titanium(IV)-substituted polyoxotungstates. Complex 1 was characterized by complete elemental analysis, TG/DTA, FTIR, UV/Vis absorption, and solution ((31)P and (183)W) NMR spectroscopy. The longest wavelength band in the UV/Vis absorption spectra of 1 in water was attributed to the O-->Ti(IV) ligand-to-metal charge-transfer (LMCT) transition: the wavelength of the LMCT band increased linearly as the number of TiO(6) octahedra contained in the Keggin and Dawson polyoxoanions increased. The Ti(n) chromophores formed in the Keggin and Dawson polyoxotungstates are water-soluble analogues of solid TiO(2) or SrTiO(3) as light-semiconductors and photocatalysts.     

Sodium Trinitratouranylate(VI) Na[UO2(NO3)3]

Although potassium, rubidium, and cesium uranyl nitrate have been characterized a long time ago, the crystal structure and properties of the homologous sodium compounds has not been reported yet. Na[UO₂(NO₃)₃] crystallizes in a unique structure [Pearson code cP72, cubic, P2₁3, no. 198, Z = 4, a = 10.6324(14) Å, 938 unique reflections with I_o > 2σ(I_o), R₁ = 0.0379, wR₂ = 0.0947, GooF = 1.092, T = 293 K]. The structure is characterized by an open framework built by interconnected helical chains formed by {UO₈} and {NaO₆} units. The vibrational and optical (UV/Vis absorption and luminescence) spectra match well with those of the higher alkali metal uranyl nitrates.     

Synthesis and Characterization of Two Formyl 2‐Tetrazenes

The synthesis of two formyl 2‐tetrazenes, namely, (E)‐1‐formyl‐1,4,4‐trimethyl‐2‐tetrazene ( 2 ) and (E)‐1,4‐diformyl‐1,4‐dimethyl‐2‐tetrazene ( 3 ), by oxidation of (E)‐1,1,4,4‐tetramethyl‐2‐tetrazene ( 1 ) using potassium permanganate in acetone solution is presented. Compound 3 was also synthesized in an improved yield from the oxidation of 1‐formyl‐1‐methylhydrazine ( 4a ) using potassium permanganate in acetone. Both compounds 2 and 3 were characterized by analytical (elemental analysis, GC‐MS) and spectroscopic methods (¹H, ¹³C, and ¹⁵N NMR spectroscopy, and IR and Raman spectroscopy). In addition, the solid‐state structures of the compounds were confirmed by low‐temperature X‐ray analysis. (Compound 2 : triclinic; space group P‐1; a=5.997(1) Å, b=8.714(1) Å, c=13.830(2) Å; α=107.35(1)°, β=90.53(1)°, γ=103.33(1)°; V_UC=668.9(2) ų; Z=4; ρ_calc=1.292 cm^?3. Compound 3 : monoclinic; space group P2₁/c; a=5.840(2) Å, b=7.414(3) Å, c=8.061(2) Å; β=100.75(3)°; V_UC=342(2) ų; Z=2; ρ_calc=1.396 g cm^?3.) The vibrational frequencies of compounds 2 and 3 were calculated using the B3LYP method with a 6‐311+G(d,p) basis set. We also computed the natural bond orbital (NBO) charges using the rMP2/aug‐cc‐pVDZ method and the heats of formation were determined on the basis of their electronic energies. Furthermore, the thermal stabilities of these compounds, as well as their sensitivity towards classical stimuli, were also assessed by differential scanning calorimetry and standard BAM tests, respectively. Lastly, the attempted synthesis of (E)‐1,2,3,4‐tetraformyl‐2‐tetrazene ( 6 ) is also discussed.     

Kristallstruktur und Eigenschaften von Calcium- und Strontiumhexathiodiphosphat(IV), Ca2P2S6 und Sr2P2S6, mit einem Beitrag zu Ca5P8 und Pb2P2S6

Crystal Structure and Properties of Calcium and Strontium Hexathiodiphosphate(IV), Ca₂P₂S₆ and Sr₂P₂S₆, with a Contribution on Ca₅P₈ and Pb₂P₂S₆ Ca₂P₂S₆ and Sr₂P₂S₆ were prepared from metal and a mixture of red phosphorus and sulfur (molar ratio M:P:S = 1:1:3) in 2 corundum crucibles inserted in quartz ampullae under vacuum (20 d 900°C). The compounds were obtained as colourless, crystalline powders containing single crystals. They crystallize in the Sn₂P₂S₆ (high temperature form) type structure (P2₁/c, Z = 2): Ca₂P₂S₆ a = 653.2(2)pm, b = 728.1(2)pm, c = 1110.1(4)pm, β = 124.00(4)°, d = 2.50(2); Sr₂P₂S₆ a = 664.3(2)pm, b = 755.7(3)pm, c = 1139.7(3)pm, β = 124.07(2)°, d = 2.97(2). The anions P₂S have staggered confirmation and are arranged with the motif of a cubic close-packing. Sr²⁺ is coordinated by 8S which form a twofold face-capped trigonal prism and belong to 4P₂S. Structure calculations clearly show that Pb₂P₂S₆ also crystallizes in P2₁/c and not in Pc [1]. Also, Raman- and IR-spectra of Ca₅P₈ were recorded at 20°C. The stretching vibrations of P were assigned in analogy to those of P₂S in alkaline earth hexathiodiphosphates(IV). The range of their frequencies (480 to 340 cm^?1) is essentially smaller and shifted to smaller values compared with P₂S in Ca₂P₂S₆ and Sr₂P₂S₆ (620 to 390 cm^?1). The symmetry of P is not D_3d but C_2h as in the case of P₂S.     

Ex‐Situ Kinetic Investigations of the Formation of the Poly‐Oxo Cluster U38

The ex‐situ qualitative study of the kinetic formation of the poly‐oxo cluster U₃₈, has been investigated after the solvothermal reaction. The resulting products have been characterized by means of powder XRD and scanning electron microscopy (SEM) for the solid phase and UV/Vis, X‐ray absorption near edge structure (XANES), extended X‐ray absorption fine structure (EXAFS), and NMR spectroscopies for the supernatant liquid phase. The analysis of the different synthesis batches, stopped at different reaction times, revealed the formation of spherical crystallites of UO₂ from t=3 h, after the formation of unknown solid phases at an early stage. The crystallization of U₃₈ occurred from t=4 h at the expense of UO₂, and is completed after t=8 h. Starting from pure uranium(IV) species in solution (t=0–1 h), oxidation reactions are observed with a U^IV/U^VI ratio of 70:30 for t=1–3 h. Then, the ratio is inversed with a U^IV/U^VI ratio of 25/75, when the precipitation of UO₂ occurs. Thorough SEM observations of the U₃₈ crystallites showed that the UO₂ aggregates are embedded within. This may indicate that UO₂ acts as reservoir of uranium(IV), for the formation of U₃₈, stabilized by benzoate and THF ligands. During the early stages of the U₃₈ crystallization, a transient crystallized phase appeared at t=4 h. Its crystal structure revealed a new dodecanuclear moiety (U₁₂), based on the inner hexanuclear core of {U₆O₈} type, decorated by three additional pairs of dinuclear U₂ units. The U₁₂ motif is stabilized by benzoate, oxalates, and glycolate ligands.     

A kinetically stabilized ferrocenyl diphosphene: synthesis, structure, properties, and redox behavior

A new, stable ferrocenyl diphosphene [Tbt-P==P-Fc] (1) (Tbt=2,4,6-tris[bis(trimethylsilyl)methyl]phenyl, Fc = ferrocenyl) was synthesized by the dehydrochlorination reaction of the corresponding diphosphane, [Tbt-P(H)-P(Cl)-Fc] (8), with 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) in good yield. Diphosphene 1 is very stable in the solid state and also in solution. In the 31P NMR spectrum (C6D6), diphosphene 1 showed a low-fielded AB quartet at delta 501.7 and 479.5 ppm with the coupling constant 1J(PP)=546 Hz, which is characteristic of an unsymmetrically substituted trans-diphosphene. The molecular structure of 1 was established by X-ray crystallographic analysis, which showed a trans-diphosphene with a C-P-P-C torsion angle of 177.86(17) degrees . The phosphorus-phosphorus bond length of 1 [2.0285(15) A] which is considerably shorter than the typical P-P single-bond lengths (ca. 2.22-2.24 A) and within the range of reported P=P double-bond lengths (1.985-2.051 A) for diaryl diphosphenes, evidenced the P=P double-bond character of 1 in the solid state. In addition, the cyclic voltammograms of 1 showed reversible reduction and oxidation couples at -1.95 and +0.34 V versus SCE, respectively. The electrochemical results for 1 were reasonably supported by the DFT calculations, which suggested that the LUMO and HOMO orbitals should be mainly pi* orbital of the diphosphene moiety and d orbitals of the iron(II) atom, respectively.     

Synthesis,Characterization, and Properties of Pentanitrobenzene C6H(NO2)5

The synthesis of the polynitroaromatic compound pentanitrobenzene was re‐examined by modern spectroscopic, structural and physicochemical methods. Originally prepared in 1979, this material could exhibit interesting properties as an oxygen‐rich energetic building block. The energies of formation were calculated with the GAUSSIAN program package and the detonation parameters were predicted using the EXPLO5 computer code. The performance data were determined and compared to the common oxidizer ammonium perchlorate. The crystal structure of pentanitrobenzene was determined by X‐ray crystallography, and those of 2,3,4,6‐tetranitroaniline and styphnic acid (trinitroresorcinol) were re‐determined.     

Synthesis and Characterization of N,N‐Di‐substituted Acylthiourea Copper(II) Complexes

A series of six N,N‐di‐substituted acylthiourea ArC(O)NHC(S)NRR′ ligands (denoted as HLⁿ) [Ar = 1‐Naph: NRR′ = NPh₂, HL¹ ( 1 ); N(iPr)Ph, HL² ( 2 ). Ar = Mes: NRR′ = NPh₂, HL⁴ ( 3 ); N(iPr)Ph, HL⁵ ( 4 ); NEt₂, HL⁶ ( 5 ). Ar = Ph: NRR′ = N(iPr)Ph, HL⁸ ( 6 )] were synthesized and characterized. These ligands were deprotonated to form Cu^II complexes through metathesis or combined redox reaction with copper halides. The structures of the complexes were investigated with single‐crystal X‐ray diffraction. The reaction of the 1‐naphthalene derivative HL¹ ( 1 ) with CuBr in the presence of sodium acetate produced cis‐CuL¹₂ ( 7 ), where the deprotonated ligand is bound to the Cu^II atom in a bidentate‐(O, S) coordination mode. Similarly treatment of HL² ( 2 ) with NaOAc and CuCl resulted in the formation of the cis‐arranged product [cis‐CuL²₂ ( 8 )]. The reaction of mesityl derivative HL⁴ ( 3 ) and CuBr with and without the addition of NaOAc gave the cis‐CuL⁴₂ ( 9 ) and cis‐(HL⁴)₂CuBr ( 10 ), respectively. In contrast, reaction of HL⁵ ( 4 ) and CuI in the presence of NaOAc resulted in trans‐CuL⁵₂ ( 11 ). Alternatively trans‐CuL⁶₂ ( 12 ) was obtained by the reaction of diethyl‐substituted HL⁶ ( 5 ) with CuCl₂ in the absence of a base.     

Tetrahedral Oligothiophenes; Synthesis,X‐ray Analysis,and Optoelectronic Properties of Highly Symmetrical, 3D‐Branched Oligothiophenes

Tetrakis(bithienyl)methane and tetrakis(terthienyl)methane have been synthesized from tetrakis(2‐thienyl)methane by use of Suzuki–Miyaura coupling as a key reaction. Their trimethylsilyl (TMS) derivatives are also synthesized. X‐ray analysis reveals that each oligothiophene moiety tends to adopt anti‐conformations and show relatively small torsion angles between the adjacent thiophene rings. While the longest absorption maxima of these tetrakis(oligothienyl)methanes exhibit only a slight bathochromic shift compared to the corresponding linear oligothiophene derivative, tetrakis(bithienyl)methane and its TMS derivative exhibit an appreciable red‐shift in their fluorescence spectra. The intramolecular interaction between thienyl groups of tetrakis(2‐thienyl)methane is supported by DFT calculation.     

Experimental and Computational Probes of the Nature of Halogen Bonding: Complexes of Bromine‐Containing Molecules with Bromide Anions

The nature of halogen bonding is examined via experimental and computational characterizations of a series of associates between electrophilic bromocarbons R? Br (R? Br=CBr₃F, CBr₃NO₂, CBr₃COCBr₃, CBr₃CONH₂, CBr₃CN, etc.) and bromide anions. The [R? Br, Br^?] complexes show intense absorption bands in the 200–350 nm range which follow the same Mulliken correlation as those observed for the charge‐transfer associates of bromide anions with common organic π‐acceptors. For a wide range of the associates, intermolecular R? Br???Br^? separations decrease and intramolecular C? Br bond lengths increase proportionally to the Br^?→R? Br charge transfer; and the energies of R? Br???Br^? bonds are correlated with the linear combination of orbital (charge‐transfer) and electrostatic interactions. On the whole, spectral, structural and thermodynamic characteristics of the [R? Br, Br^?] complexes indicate that besides electrostatics, the orbital (charge‐transfer) interactions play a vital role in the R? Br???Br^? halogen bonding. This indicates that in addition to controlling the geometries of supramolecular assemblies, halogen bonding leads to electronic coupling between interacting species, and thus affects reactivity of halogenated molecules, as well as conducting and magnetic properties of their solid‐state materials.     

Synthesis,Spectroscopic Characterization,and Oxidative C–C Coupling in New Copper(II) Salicylaldiminates Containing Sterically Hindered Phenol

New bis[N‐(2,6‐di‐tert‐butyl‐1‐hydroxyphenyl)salicylideneminato]copper(II) complexes bearing HO and CH₃O substituents on the salicyaldehyde moiety were prepared, and have been characterized by elemental analyses, IR, UV/Vis, ESR spectroscopy, and magnetic moments. It has been found that in the synthesis of CH₃O substituted complexes unlike HO bearing, the oxidative C–C coupling of coordinated salicylaldimine ligands take place. It has been suggested that the intermolecular H‐bonding is a dominant factor in controlling of oxidative C–C coupling conversion. The powder ESR spectra of CH₃O substituted compounds unlike of HO are typical of a triplet state Cu^II dimers with a half‐field forbidden (δM = ± 2) and the allowed (δM = ± 1) transitions at 300 and 113 K.     

Further Example of Diphosphates: Synthesis and Characterization of K2Li2P2O7

By the application of cation substitution, a new mixed‐alkali metal diphosphate, K₂Li₂P₂O₇, was successfully synthesized through high temperature solution method for the first time. The single‐crystal X‐ray structural analysis shows that it crystallizes in the monoclinic space group C2/c (no. 15), with lattice constants a = 9.814(3) Å, b = 5.5163(15) Å, c = 13.538(4) Å, Z = 4, and β = 110.47(2)°. Its open cage‐like _∞³[Li₂(P₂O₇)]^2– framework is built up from alternating arrangement of Li₂O₆ and P₂O₇ dimers that form eight and twelve‐membered‐ring channels along the [010] direction, and the K atoms are entrapped in the larger twelve‐membered‐ring channels. Detailed structure comparisons in the N₄P₂O₇ (N = mixed alkali metals) family are discussed. In addition, the structural validity was verified through the IR spectrum. Thermal analyses and UV/Vis/NIR diffuse reflectance spectrum are also performed on the reported compound.     

Synthesis,Crystal Structure and Characterization of the Copper Iron Phosphate Cu8Fe2O5(PO4)4

The system CuO‐Fe₂O₃‐P₂O₅ has been investigated by means of the solid state reaction between CuO, Fe₂O₃ and (NH₄)₂HPO₄ in quartz crucibles at 900 °C. The powder samples were characterized by X‐ray diffraction, IR spectroscopy and TG/DTA. Single crystals of a new quaternary phase Cu₈Fe₂P₄O₂₁ were achieved by cooling from the melt of the compound in a sealed, evacuated quartz ampoule. Cu₈Fe₂O₅(PO₄)₄ crystallizes in the monoclinic space group C2/m (No 12) with a = 15.9733(8) Å, b = 5.9438(3) Å, c = 9.5530(5) Å, β = 113.76(1)°, Z = 2. The three‐dimensional framework consists of [FeO₆] octahedra, three different [CuO₅] polyhedra and [PO₄] tetrahedra. Cu₈Fe₂P₄O₂₁ exhibits an incongruently melting point at 945 °C.     

Unprecedented Electron‐Poor Octahedral Ta6 Clusters in a Solid‐State Compound: Synthesis,Characterisations and Theoretical Investigations of Cs2BaTa6Br15O3

The crystal structure of Cs₂BaTa₆Br₁₅O₃ has been elucidated by using synchrotron X‐ray powder diffraction and absorption experiments. It is built from edge‐bridged octahedral [(Ta₆${{\rm Br}{{{\rm i}\hfill \atop 9\hfill}}}$ ${{\rm O}{{{\rm i}\hfill \atop 3\hfill}}}$ )${{\rm Br}{{{\rm a}\hfill \atop 6\hfill}}}$ ]^4? cluster units with a singular poor metallic electron (ME) count equal to thirteen. This leads to a paramagnetic behaviour related to one unpaired electron. The arrangement of the Ta₆ clusters is similar to that of Cs₂LaTa₆Br₁₅O₃ exhibiting 14‐MEs per [(Ta₆${{\rm Br}{{{\rm i}\hfill \atop 9\hfill}}}$ ${{\rm O}{{{\rm i}\hfill \atop 3\hfill}}}$ )${{\rm Br}{{{\rm a}\hfill \atop 6\hfill}}}$ ]^5? motif. The poorer electron‐count cluster presents longer metal–metal distances as foreseen according to the electronic structure of edge‐bridged hexanuclear cluster. Density functional theory (DFT) calculations on molecular models were used to rationalise the structural properties of 13‐ and 14‐ME clusters. Periodic DFT calculations demonstrate that the electronic structure of these solid‐state compounds is related to those of the discrete octahedral units. Oxygen–barium interactions seem to prevent the geometry of the octahedral cluster to strongly distort, allowing stabilisation of this unprecedented electron‐poor Ta₆ cluster in the solid state.     

Synthesis and Characterization of the Mixed‐Linker Copper(II) Coordination Polymer [Cu(HO3PC6H4SO3)(C10N2H8)]·H2O

A new copper(II) phosphonatobenzenesulfonate incorporating 4,4′‐bipyridine (4,4′‐bipy) as auxiliary ligand has been discovered through systematic high‐throughput (HT) screening of the system Cu(NO₃)₂·3H₂O/H₂O₃PC₆H₄SO₃H/4,4′‐bipy using different solvents. The hydrothermal synthesis of [Cu(HO₃PC₆H₄SO₃)(C₁₀H₈N₂)]·H₂O ( 1 ) was further optimized by screening various copper(II) salts. The crystal structure of 1 was determined by single‐crystal X‐ray diffraction and unveiled the presence of isolated sixfold coordinated Jahn–Teller‐distorted Cu²⁺ ions. The isolated CuN₂O₄ octahedra are interconnected by phosphonate and sulfonate groups to form chains along the c‐axis. The organic groups, namely phenyl rings and 4,4′‐bipy molecules cross‐link the chains into a three‐dimensional framework. Water molecules are found in the narrow voids in the structure which are held by weak hydrogen bonds. Upon dehydration, the structure of 1 undergoes a phase transition, which was confirmed by TG measurements and temperature dependent X‐ray powder diffraction. The new structure of 1‐h was refined with Rietveld methods. Detailed inspection of the structure revealed the directional switching of the Jahn–Teller distortion upon de/rehydration. Weak ferro‐/ferrimagnetic interactions were observed by magnetic investigations of 1 , which switch to antiferromagnetic below 3.5 K. Compounds 1 and 1‐h are further characterized by thermogravimetric and elemental analysis as well as IR spectroscopy.     

Synthesis and Characterization of the Trisulfate Pb[S3O10] and Theoretical Analysis of H2S3O10

The reaction of (NH₄)₂PbCl₆ and fuming sulfuric acid (65 % SO₃) in a sealed glass tube at 250 °C led to colorless single crystals of Pb[S₃O₁₀] (orthorhombic, Pbcn, Z = 4, a = 10.9908(4), b = 8.5549(3), c = 8.0130(3) Å, V = 753.42(5) ų). The compound shows a three‐dimensional linkage of the tenfold oxygen coordinated Pb²⁺ ions and exhibits the unusual trisulfate anion, [S₃O₁₀]^2–, that consists of three vertex connected [SO₄] tetrahedra. The distances S–O within the S–O–S bridges of the anion are remarkable asymmetric with distances of 155 and 169 pm, respectively. This structural feature is well reproduced by calculations on a PBE0/cc‐pVTZ and a MP2/cc‐pVTZ level of theory. Similar calculations allow also for an inspection of the yet unknown corresponding acid, H₂S₃O₁₀. Also for this acid non‐symmetric S–O–S bridges are predicted. The thermal behavior of Pb[S₃O₁₀] is characterized by the loss of two equivalents of SO₃ at low temperature and the decomposition of intermediate Pb[SO₄] at higher temperature.     

Indachlorins: Nonplanar Indanone‐Annulated Chlorin Analogues with Panchromatic Absorption Spectra between 300 and 900 nm

Indaphyrins, pyrrole‐modified porphyrins containing a cleaved pyrrole β,β′‐bond and two annulated indanone moieties, possess unusually broadened and redshifted UV/Vis spectra because of their π‐expanded chromophores. The parent free base indaphyrin has been crystallographically characterized, highlighting its strongly ruffled conformation incorporating a helimeric twist. It was shown to be susceptible to regiospecific derivatizations at the opposite side of the ring‐cleaved pyrrole (dihydroxylation, followed by functional group transformations of the resulting diol functionality), generating indaphyrin‐based chlorin analogues, indachlorins, that incorporate a dihydroxypyrroline, pyrrolindione, oxazolone, or a morpholine moiety. Structural modifications resulted in further broadening and hyper‐ and bathochromic shifts of the optical spectra, some of which possess a nearly panchromatic absorption between 300 to well above 900 nm. The extents to which these modifications affect their solid‐state conformations were analyzed.