Neodymium‐based catalysts bearing phosphate ligands for ring‐opening polymerization of ɛ‐caprolactone

Neodymium‐based catalysts coordinated with phosphate ligands (NdCl₃·3L), where L = triethyl phosphate (TEP) or tris(2‐ethylhexyl) phosphate (TEHP), were synthesized. The ring‐opening polymerizations (ROP) of ɛ‐caprolactone (ɛ‐CL) with these catalysts in the presence of benzyl alcohol initiator were performed, yielding polymers with well‐defined molecular weights and relatively narrow polydispersity index (PDI = 1.22–1.65). In situ NMR analysis of the reaction between NdCl₃·3TEP and benzyl alcohol indicated that ROP proceeds through a coordination‐insertion mechanism. The end groups of the resultant polymers were determined using MALDI‐ToF mass spectrometry and NMR spectroscopy. The quasi‐living nature of this catalytic system was demonstrated by kinetic studies and the successful synthesis of the block copolymer poly(ɛ‐caprolactone)‐block‐poly(l ‐lactide) by sequential monomer addition. Kinetic studies revealed that the catalyst with the bulkier TEHP ligand increased the rate of ROP of ɛ‐CL as compared to the TEP ligand. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1289–1296     

Aluminum salen and salan complexes in the ring‐opening polymerization of cyclic esters: Controlled immortal and copolymerization of rac‐β‐butyrolactone and rac‐lactide

Aluminum‐based salen and salan complexes mediate the ring‐opening polymerization (ROP) of rac‐β‐butyrolactone (β‐BL), rac‐lactide, and ε‐caprolactone. Al‐salen and Al‐salan complexes exhibit excellent control over the ROP of rac‐β‐butyrolactone, yielding atactic poly(3‐hydroxybutyrate) (PHB) with narrow PDIs of <1.15 for Al‐salen and <1.05 for Al‐salan. Kinetic studies reveal pseudo‐first‐order polymerization kinetics and a linear relationship between molecular weight and percent conversion. These complexes also mediate the immortal ROP of rac‐β‐BL and rac‐lactide, through the addition of excess benzyl alcohol of up to 50 mol eq., with excellent control observed. A novel methyl/adamantyl‐substituted Al‐salen system further improves control over the ROP of rac‐lactide and rac‐β‐BL, yielding atactic PHB and highly isotactic poly(lactic acid) (P_m = 0.88). Control over the copolymerization of rac‐lactide and rac‐β‐BL was also achieved, yielding poly(lactic acid)‐co‐poly(3‐hydroxybutyrate) with narrow PDIs of <1.10. ¹H NMR spectra of the copolymers indicate a strong bias for the insertion of rac‐lactide over rac‐β‐BL. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Ring‐opening polymerization of lactide, ε‐caprolactone and their copolymerization catalyzed by β‐diketiminate zinc complexes

A series of zinc silylamido complexes bearing non‐symmetric β ‐diketiminate ligands were synthesized and structurally characterized. Ring‐opening polymerization (ROP) of rac ‐lactide catalyzed by these zinc complexes afforded heterotactic polylactides at room temperature (P _r = 0.79 ~ 0.83 in THF). The steric and electronic characteristics of the ancillary ligands showed significant influence on the polymerization performance of the corresponding zinc complexes. All these zinc complexes also showed moderate activities toward the polymerization of ε ‐caprolactone at ambient temperature in toluene, producing polycaprolactones (PCLs) with high molecular weights and moderate polydispersities. PCL‐b ‐PLLA copolymers could be obtained via three different copolymerization strategies (one‐pot polymerization, and sequential addition of the two monomers in either order) by adopting complex 6 as the initiator through the adjustment of reaction temperatures. The diblock nature of the copolymers was confirmed by ¹³C NMR spectroscopy and DSC analysis.     

Organocatalysis applied to the ring‐opening polymerization of β‐lactones: A brief overview

Organocatalysis offers a number of prospects in the polymer community and presents advantages over metal based and bio‐organic methods. The use of organic molecules for performing chemical reactions is not a new concept, and any research into organocatalytic reactions builds on a respected history. Compared to the organocatalysis of large lactones, which began in the early 2000s, the examples presented here will demonstrate that few metal‐free initiating systems had been applied to β‐lactones well before the beginning of the current millennium. These metal‐free initiating systems present indisputable advantages over metal‐based processes. In the following paper, ring‐opening polymerizations (ROPs) of various β‐lactones for the preparation of poly(hydroxyalkanoate)s will be presented, as will the types of mechanisms involved, that is, zwitterionic and anionic, and cationic or supramolecular‐based ROPs. The advantages and drawbacks of the different technics will be discussed in the domain, which, for us, is important in the overall production of bioplastics. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 657–672     

Controlled/living ring‐opening polymerization of ε‐caprolactone with salicylic acid as the organocatalyst

Ring‐opening polymerization (ROP) of ε‐caprolactone (CL) using salicylic acid (SAA) as the organocatalyst and benzyl alcohol as the initiator in bulk at 80 °C successfully proceeded to give a narrowly distributed poly(ε‐caprolactone) (PCL). In addition, 2‐hydroxyethyl methacrylate, propargyl alcohol, 6‐azido‐1‐hexanol, and methoxy poly(ethylene glycol) were also used as functional initiators. The ¹H NMR, SEC, and MALDI‐TOF MS measurements of the PCL clearly indicate the presence of the initiator residue at the chain end, implying that the SAA‐catalyzed ROP of CL was through the activated monomer mechanism. The kinetic experiments confirmed the controlled/living nature of the SAA‐catalyzed ROP of CL. Furthermore, the block copolymerization of CL and δ‐valerolactone successfully proceeded to give poly(ε‐caprolactone)‐block‐poly(δ‐valerolactone). © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1185–1192     

Development and application of novel ring‐opening polymerizations to functional networked polymers

This Highlight gives an overview of the recent progress in development of new ring‐opening polymerizations (ROPs) and their applications to functional networked polymers in our group. The described ROPs involve thermally induced polymerization of 1,3‐benzoxazine, anionic alternating copolymerizations of epoxides and lactones, and those exhibiting equilibrium nature. These ROPs were successfully applied to the syntheses of the relevant networked polymers, leading to their distinctive features such as high thermal stability, small volume shrinkage, and selective decrosslinking ability, which enabled design and development of next generation materials. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4847–4858, 2009     

Ring opening polymerization and copolymerization of L‐lactide and ɛ‐caprolactone by bis‐ligated magnesium complexes

Seven magnesium complexes ( 1–7 ) were synthesized by reaction of new ( L ³ ‐H – L ⁵ ‐H ) and previously reported ketoimine pro‐ligands with dibutyl magnesium and were isolated in 59–70% yields. Complexes 1–7 were characterized fully and consisted of bis‐ligated homoleptic ketoiminates coordinated in distorted octahedral geometry around the magnesium centers. The complexes were investigated for their ability to initiate the ring opening polymerization (ROP) of l ‐lactide (L‐LA) to poly‐lactic acid (PLA) and ?‐caprolactone (?CL) to poly‐caprolactone in the presence of 4‐fluorophenol co‐catalyst. For L‐LA polymerization, complexes containing ligand electron‐donating groups ( 1–5 ) achieved >90% conversion in 2 h at 100 °C, while the presence of CF₃ groups in 6 and 7 slowed or resulted in no PLA detected. With ?CL, ROP initiated with 1–7 resulted in lower percentage conversion with similar electronic effects. Moderate molecular weight PLA polymeric material (14.3–21.3 kDa) with low polydispersity index values (1.23–1.56) was obtained, and ROP appeared to be living in nature. Copolymerization of L‐LA and ?CL yielded block copolymers only from the sequential polymerization of ?CL followed by L‐LA and not the reverse sequence of monomers or the simultaneous presence of both monomers. Polymers and copolymers were characterized with NMR, gel permeation chromatography, and differential scanning calorimetry. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 48–59     

Ring‐opening polymerization of ϵ‐caprolactam and ϵ‐caprolactone via microwave irradiation

A novel process for synthesizing nylon‐6 and poly(?‐caprolactone) by microwave irradiation of the respective monomers, ?‐caprolactam and ?‐caprolactone, is described. The ring opening of ?‐caprolactam to produce nylon‐6 was performed in a microwave oven by the forward power being controlled to about 90–135 W in the presence of an ω‐aminocaproic acid catalyst (10 mol %) and for periods of 1–3 h at temperatures varying from 250 to 280 °C. The ring opening of ?‐caprolactone to produce poly(?‐caprolactone) was performed in a microwave oven by the forward power being controlled to about 70–100 W for a period of 2 h in the presence of stannous octoate with and without 1,4‐butanediol over a temperature range of 150–200 °C. The yields, conditions of the reactions, and properties of the products generated relative to the thermal processes are discussed. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2264–2275, 2002     

Titanium complexes of dialkanolamine ligands as initiators for living ring‐opening polymerization of ε‐caprolactone

The titanium complexes with one ( 1a , 1b , 1c ) and two ( 2a , 2b ) dialkanolamine ligands were used as initiators in the ring‐opening polymerization (ROP) of ε‐caprolactone. Titanocanes 1a and 1b initiated living ROP of ε‐caprolactone affording polymers whose number‐average molecular weights (M_n) increased in direct proportion to monomer conversion (M_n ≤ 30,000 g mol^?1) in agreement with calculated values, and were inversely proportional to initiator concentration, while the molecular weight distribution stayed narrow throughout the polymerization (M_w/M_n ≤ 1.2 up to 80% monomer conversion). ¹H‐NMR and MALDI‐TOF‐MS studies of the obtained poly(ε‐caprolactone)s revealed the presence of an isopropoxy group originated from the initiator at the polymer termini, indicating that the polymerization takes place exclusively at the Ti–OⁱPr bond of the catalyst. The higher molecular weight polymers (M_n ≤ 70,000 g mol^?1) with reasonable MWD (M_w/M_n ≤ 1.6) were synthesized by living ROP of ε‐caprolactone using spirobititanocanes ( 2a , 2b ) and titanocane 1c as initiators. The latter catalysts, according MALDI‐TOF‐MS data, afford poly(ε‐caprolactone)s with almost equal content of α,ω‐dihydroxyl‐ and α‐hydroxyl‐ω(carboxylic acid)‐terminated chains arising due to monomer insertion into “Ti–O” bond of dialkanolamine ligand and from initiation via traces of water, respectively. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1230–1240, 2010     

Cyclic poly(ε‐caprolactone) synthesized by combination of ring‐opening polymerization with ring‐closing metathesis,ring closing enyne metathesis,or “click” reaction

This article described the synthesis of cyclic poly(ε‐caprolactone) (PCL) via ring‐closing metathesis (RCM), ring closing enyne metathesis (RCEM), and “click” reaction of different difunctional linear PCL. Linear PCL precursors were prepared by ring‐opening polymerization (ROP) of ε‐caprolactone in bulk using 10‐undecen‐1‐ol or propargyl alcohol as the initiator, followed by reacting with corresponding acyl chloride containing vinyl or azido end group. The subsequent end‐to‐end intramolecular coupling reactions were performed under high dilution conditions. The successful transformation of linear PCL precursor to cyclic PCL was confirmed by Gel permeation chromatography, ¹H NMR, and Fourier transform infrared measurements. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3022–3033, 2009     

Electrochemically reduced tungsten‐based active species as catalysts for metathesis‐related reactions: ring‐opening metathesis copolymerization of cyclopentene with cyclooctene

The ring‐opened metathesis copolymerization of cyclopentene with cyclooctene by an electrochemically generated WCl₆‐based catalyst has been prepared and ¹³C NMR spectroscopy used to analyse in detail the nature of the homo‐ and hetero‐dyad units. This copolymer was characterized by gel‐permeation chromatography (M_n = 12 900, PDI= 2.2) and differential scanning calorimetry analysis. The glass‐transition temperature T_g of the copolymer was ?18.7 °C. Homopolymerization of cyclopentene is also reported to compare with copolymers produced in this work. Copyright © 2005 John Wiley & Sons, Ltd.     

Microwave syntheses of poly(ε‐caprolactam‐co‐ε‐caprolactone)

Microwave irradiation was applied to synthesize poly(ε‐caprolactam‐co‐ε‐caprolactone) directly from the anionic catalyzed ring opening of two cyclic monomers, ε‐caprolactam and ε‐caprolactone using a variable frequency microwave furnace, programmed to a set temperature and controlled by a pulsed power on–off system. Dielectric properties of ε‐caprolactam, ε‐caprolactone, and their mixture were measured in the microwave range from 0.4 to 3 GHz, showing that both ε‐caprolactam and ε‐caprolactone exhibited effective absorption of microwave energy to induce a fast chemical reaction. The microwave induced anionic copolymerization of ε‐caprolactam and ε‐caprolactone generated copoly(amide‐ester)s in yields as high as 70%. Conventional thermal and microwave copolymerization studies were also conducted for comparison with the microwave results. These studies demonstrated that an effective and efficient microwave method to copolymerize ε‐caprolactam with ε‐caprolactone in higher yield, higher amide content, and higher T_g 's, relative to the thermal process, has been developed. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1379–1390, 2000     

Organic‐acid mediated bulk polymerization of ε‐caprolactam and its copolymerization with ε‐caprolactone

Polyamides (PA) constitute one of the most important classes of polymeric materials and have gained strong position in different areas, such as textiles, fibers, and construction materials. Whereas most PA are synthesized by step‐growth polycondensation, PA 6 is synthesized by ring opening polymerization (ROP) of ε‐caprolactam (ε‐CLa). The most popular ROP methods involve the use of alkaline metal catalyst difficult to handle at large scale. In this article, we propose the use of organic acids for the ROP of ε‐CLa in bulk at 180 °C (below the polymer's melting point). Among evaluated organic acids, sulfonic acids were found to be the most effective for the polymerization of ε‐CLa , being the Brønsted acid ionic liquid: 1‐(4‐sulfobutyl)?3‐methylimidazolium hydrogen sulfate the most suitable due to its higher thermal stability. End‐group analysis by ¹H nuclear magnetic resonance and model reactions provided mechanistic insights and suggested that the catalytic activity of sulfonic acids was a function of not only the acid strength, but of the nucleophilic character of conjugate base as well. Finally, the ability of sulfonic acid to promote the copolymerization of ε‐CLa and ε‐caprolactone is demonstrated. As a result, poly(ε‐caprolactam‐co‐ε‐caprolactone) copolymers with considerably randomness are obtained. This benign route allows the synthesis of poly(ester amide)s with different thermal and mechanical properties. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2394–2402     

Synthesis and properties of poly(carbonate‐co‐ester)s obtained by cationic ring‐opening copolymerization of spiroorthocarbonate and ε‐caprolactone

Cationic ring‐opening copolymerization behavior of 1,5,7,11‐tetraoxaspiro[5.5]undecane (SOC1) and ε‐caprolactone (CL), and the thermal behavior of the obtained copolymers are described. When SOC1 and CL were cationically copolymerized under various feed ratios using BF₃OEt₂ as the initiator in CH₂Cl₂ at 25 °C, the corresponding copolymers were obtained in 77–99% yields. The ¹H NMR spectroscopic analysis of the copolymers revealed that the copolymer compositions were almost identical to the feed ratios, and the diad ratios of SOC1–SOC1/SOC1–CL and CL–SOC1/CL–CL are 48.0/52.0 and 54.3/45.7. These observations proved the random structures of the copolymers without containing the long blocks of the homopolymer sequences. Differential scanning calorimetric (DSC) analysis revealed that the melting points and melting entharpies decreased with the increase of the SOC1 unit compositions, suggesting that the copolymers gain flexibility as the SOC1 unit increases. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2937–2942, 2006     

Homoleptic lanthanide metallocenes and their derivates: syntheses,structural characterization and their catalysis for ring‐opening polymerization of ε‐caprolactone

Homoleptic lanthanide metallocenes Cp′₃Ln [Cp′ = methylcyclopentadienyl, Ln = Y ( 1 ), Er ( 2 ), Sm ( 3 ); Cp′ = cyclopentadienyl, Ln = Er ( 4 ) and Sm ( 5 )] have been found to be a novel type of initiators for the ring‐opening polymerization (ROP) of ε‐caprolactone (ε‐CL). Among them, complex 1 shows the highest catalytic activity for ROP of ε‐CL. In addition, a novel neutral trifluoroethoxo yttrium complex [(MeC₅H₄)₂Y(µ‐OCH₂CF₃)]₂ ( 6 ) has been synthesized by the reaction of 1 with trifluoroethanol in 1:1 molar ratio in toluene and characterized by single‐crystal X‐ray structural analysis. Preliminary study shows that the catalytic activity of tris(methylcyclopentadienyl)yttrium complex 1 is higher than that of bis(methylcyclopentadienyl)yttrium complex 6 . The mechanism of the present polymerization was studied by NMR spectra. Copyright © 2006 John Wiley & Sons, Ltd.     

Matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry study on copolymers obtained by the alternating copolymerization of bis(γ‐lactone) and epoxide with potassium tert‐butoxide

Oligomer samples obtained by the anionic copolymerization of a bis(γ‐lactone), 2,8‐dioxa‐1‐methylbicyclo[3.3.0]octane‐3,7‐dione ( 1 ), and glycidyl phenyl ether with potassium tert‐butoxide have been analyzed by matrix‐assisted laser desorption/ionization time‐of‐flight (MALDI‐TOF) mass spectrometry. The MALDI‐TOF mass spectra of these cooligomers show well‐resolved signals that can be reliably assigned to linear, alternating cooligomers that have carboxylate chain ends or alkoxide chain ends and cyclic ones. The formation of these three series of cooligomers suggests that the polymerization process involves concomitant intermolecular transesterification and intramolecular back‐biting. The intramolecular back‐biting reaction causes the formation of cyclic cooligomers, whereas the intermolecular transesterification causes the reduction of the molecular weight and the transformation of the alkoxide active chain end into a carboxylate chain end. The MALDI‐TOF mass spectrometry study has shown that an excess of monomer 1 enhances the selectivity of propagation by increasing the probability of the attack of the alkoxide chain end to 1 . © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2643–2649, 2005     

Acid‐promoted double ring‐opening reaction of bicyclobis (γ‐butyrolactone) with alcohol and its application to polyester synthesis

Bicyclobis(γ‐butyrolactone) (BBL) bearing methyl group 1a reacted with benzyl alcohol (BnOH) in the presence of p‐toluenesulfonic acid (p‐TsOH) through the double ring‐opening of the bislactone structure to afford the corresponding adduct 2a bearing carboxyl group. The resulting carboxyl group underwent condensation with BnOH to afford the corresponding diester 3a . The second step was quite slow at ambient temperature; however, it was efficiently accelerated by elevating temperature to 120 °C or performing under reduced pressure at 80 °C to afford 3a in an excellent yield. Based on these results, the reaction of 1a with xylene‐α,α‐diol (XyD) was carried out in chlorobenzene at 120 °C to obtain the corresponding polyester bearing ketone group in the side chain. The condensation reaction in the second step was effectively promoted by simultaneous removal of water under reduced pressure. BBLs 1b and 1c bearing reactive groups, isopropenyl and chloromethyl, respectively, were also employed as monomers efficiently. Their reactions with XyD gave the corresponding reactive polyesters bearing methacryloyl and chloroacetyl moieties, respectively. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of lactide/ɛ‐caprolactone quasi‐random copolymer by using rationally designed mononuclear aluminum complexes with modified β‐ketiminato ligand

A series of novel aluminum complexes containing bulky aryl‐β‐ketiminato ligands [ArNCH C₁₀H₇C₆H₅O]Al(CH₃)₂ ( 3a , Ar = C₆F₅; 3b , Ar = C₆H₅; 3c , Ar = 2,6‐ⁱPr₂C₆H₃) have been synthesized in high yields. These complexes were identified by ¹H and ¹³C NMR spectroscopy, elemental analysis, and X‐ray structural analysis. All the aluminum complexes could efficiently catalyze the ROP of ɛ‐caprolactone (ɛ‐CL) and Lactide (LA) in a controlled manner. It was found that the steric effect of the ligand has less effect on the ROP of CL, while the polymerization rate of L‐LA was suppressed significantly. More interestingly, this kind of catalysts can promote the random copolymerization of ɛ‐CL and L‐LA. The transesterification side reaction and the polymer composition could be adjusted by modulating the electronic and steric effects of the ligand. In paticular, compound 3c could produce quasi‐random copolymers without transesterification side reactions, as indicated by both the values of the reactivity ratios of the two monomers (r_LA = 1.31; r_CL = 0.99) and the similar average lengths of the caproyl and lactidyl sequences (L_CL = 2.34; L_LA = 2.44). Finally, a drug‐random copolymer conjugates could be easily prepared by using 3c , indicating a potential application of 3c in pharmacutical and biomedical field. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 203–212