Preparation and characterization of covalently bonded PVA/Laponite/HAPI nanocomposite multilayer freestanding films by layer‐by‐layer assembly

The layer‐by‐layer (LBL) assembly technique is an attractive method to make functional multilayer thin films and has been applied to fabricate a wide range of materials. LBL materials could improve optical transmittance and mechanical properties if the film components were covalently bonded. Covalently bonded nanocomposite multilayer films were prepared by employing hydrophilic aliphatic polyisocyanate (HAPI) as the reactive component, to react with Laponite and polyvinyl alcohol (PVA). FT‐IR spectra suggested that HAPI reacted with Laponite and PVA at ambient temperature rapidly. Ellipsometry measurement showed that the film thickness was in linear growth. The influences of HAPI on the optical, mechanical and thermal properties of the films were investigated by UV‐Vis spectroscopy, tensile stress measurement, DSC and TGA. The obtained results showed that the optical transmittance and mechanical strength were enhanced when the film components were covalently bonded by HAPI. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 545–551     

Preparation and resistivity study of silver nanocomposite films using spin‐assisted layer‐by‐layer assembly

Nanocomposite films [Ag/(PAH‐PSS)_nPAH]_m were fabricated on a silicon substrate using a time‐ and cost‐efficient spin‐assisted layer‐by‐layer (SA‐LbL) self‐assembly technique. A virtually monolayer‐like layer of self‐assembled silver nanoparticles was formed when deposition time increased to 30 min. It was found that polymer multilayers could effectively decrease the resistivity of silver nanoparticle monolayer, which was far higher than that of bulk silver metal; however, the resistivity of Ag/(PAH‐PSS)_nPAH multilayer films increased along with the increasing of the number of polymer bilayers. XPS investigations showed that silver nanoparticles were partially oxidized, which might be the major cause of the high resistivity of silver nanoparticle monolayer. Copyright © 2008 John Wiley & Sons, Ltd.     

Detection of layer‐by‐layer self‐assembly multilayer films by low‐temperature plasma mass spectrometry

The detection of layer‐by‐layer self‐assembly multilayer films was carried out using low‐temperature plasma (LTP) mass spectrometry (MS) under ambient conditions. These multilayer films have been prepared on quartz plates through the alternate assembling of oppositely charged 4‐aminothiophenol (4‐ATP) capped Au particles and thioglycolic acid (TGA) capped Ag particles. An LTP probe was used for direct desorption and ionization of chemical components on the films. Without the complicated sample preparation, the structure information of 4‐ATP and TGA on films was studied by LTP‐MS. Characteristic ions of 4‐ATP (M) and TGA (F), including [M]^+?, [M‐NH₂]⁺, [M‐HCN‐H]⁺, and [F + H]⁺, [F‐H]⁺, [F‐OH]⁺, [F‐COOH]⁺ were recorded by LTP‐MS on the films. However, [M‐CS‐H]⁺ and [F‐SH]⁺ could not be observed on the film, which were detected in the neat sample. In addition, the semi‐quantitative analysis of chemical components on monolayer film was carried out, and the amounts of 4‐ATP and TGA on monolayer surface were 45 ng/mm² and 54 ng/mm², respectively. This resulted the ionization efficiencies of 72% for 4‐ATP and 54% for TGA. In order to evaluate the reliability of present LTP‐MS, the correlations between this approach and some traditional methods, such as UV–vis spectroscopy, atomic force microscope and X‐ray photoelectron spectroscopy were studied, which resulted the correlation coefficients of higher than 0.9776. The results indicated that this technique can be used for analyzing the films without any pretreatment, which possesses great potential in the studies of self‐assembly multilayer films. Copyright © 2013 John Wiley & Sons, Ltd.     

Stimuli‐responsive micelles of amphiphilic AMPS‐b‐AAL copolymers in layer‐by‐layer films

Aqueous reversible addition‐fragmentation chain transfer polymerization was used to synthesize poly(N‐[3‐(dimethylamino)propyl]acrylamide) (PDMAPA) cationic homopolymers and micelle‐forming, pH‐responsive, amphiphilic diblock copolymers of poly(sodium 2‐acrylamido‐2‐methyl‐1‐propanesulfonate‐block‐N‐acryloyl‐L ‐alanine) (P(AMPS‐b‐AAL)). At low pH, the AAL blocks are protonated rendering them hydrophobic, whereas the AMPS blocks remain anionically charged because of the pendant sulfonate groups. Self‐assembly results in core–shell micelles consisting of hydrophobic cores of AAL and negatively charged shells of AMPS. Using solutions of these micelles with anionic coronas and of the cationic homopolymer PDMAPA, layer‐by‐layer (LbL) films were assembled at low pH, maintaining the micelle structures. Several block copolymers with varying AMPS and AAL block lengths were synthesized and used in the formation of LbL films. The thickness and morphology of the films were examined using ellipsometry and atomic force microscopy. The stimuli‐responsive behavior can be triggered by submersion of the film in water at neutral pH to disrupt the micelles. This behavior was monitored by observing the decrease in film thickness and alteration of the film morphology. The micelles were also loaded with a model hydrophobic compound, pyrene, and incorporated into LbL films. The release of pyrene from the films was monitored by fluorescence spectroscopy at varying pH values (1, 3, 5, and 7). As the pH of the solution increases, the rate of release increases. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Functional membranes prepared by layer‐by‐layer assembly and its metal ions adsorption property

PVDF/(PEI‐C/PAA)_n functional membranes were prepared by layer‐by‐layer (LbL) assembly, and their heavy metal ions adsorption capability was investigated. The changes in the chemical compositions of membrane surfaces were determined by X‐ray photoelectron spectroscopy (XPS). XPS results show that the surface of the PVDF membrane can be alternatively functionalized by PEI‐C and PAA. The membrane surface hydrophilicity was evaluated through water contact angle measurement. Contact angle results show that the surface hydrophilicity of the membrane surface depends on the outermost deposited layer. Morphological changes of membrane surfaces were observed by scanning electron microscopy (SEM). The water fluxes for these membranes were elevated after modification. The performances of the PVDF/(PEI‐C/PAA)_n membranes on the adsorption of copper ions (Cu²⁺) from aqueous solutions were investigated by inductively coupled plasma (ICP). The results indicate that the PVDF/(PEI‐C/PAA)_n functional membranes show high copper ions adsorption ability. Copyright © 2010 John Wiley & Sons, Ltd.     

Construction of β‐FeOOH nanorod‐filled layer‐by‐layer coating with effective structure to reduce flammability of flexible polyurethane foam

The β‐FeOOH nanorod‐filled coatings were deposited onto flexible polyurethane foam by layer‐by‐layer assembly technique to reduce its flammability. The coatings were constructed by two assembly systems: one was bilayer system, which was comprised of polyethylenimine and β‐FeOOH nanorods; other one was trilayer system, which was comprised of polyethylenimine, β‐FeOOH nanorods, and sodium alginate. Scanning electron microscopy images indicated that the randomly oriented and entangled network structure can only be observed for the coating that assembled by trilayer system. Cone calorimetry test revealed that the coating assembled by trilayer system can lead to significant reduction in peak heat release rate compared with those of control foam, 61.8% peak heat release rate reduction ever occurred to the eight trilayers coated sample, but the coating assembled by bilayer system has slight reduction (<20%). The result is attributed to trilayer approach being beneficial to fabricate coating with sufficient thickness to protect the underlying foams during burning. Copyright © 2016 John Wiley & Sons, Ltd.     

Layer‐by‐layer assembly of readily detachable chitosan and poly(acrylic acid) polyelectrolyte multilayer films

Free‐standing layer‐by‐layer (LbL) assembled thin films have recently found utility in a broad range of applications. Previously reported free‐standing LbL films have generally required covalent modifications to improve aqueous stability and render these films suitable for biomedical applications. Here, we engineered chitosan and poly(acrylic acid) containing polyelectrolyte multilayer films, which are readily detached from hydrophilic silicon in aqueous conditions. These films demonstrate remarkable stability over 28 days in simulated in vivo conditions (pH 7.4, phosphate buffered saline at 37 °C) without the incorporation of any covalent crosslinking modifications. These films exhibit moduli (27–420 kPa) resembling that of many biological tissues including tendon, show high visible light transmittance of greater than 50%, and prevent fibronectin adsorption. The properties of this new detachable LbL film architecture indicate its promise for use in a variety of applications, particularly in medicine and biotechnology. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 127–131     

Electrospun poly(3‐hexylthiophene)/poly(ethylene oxide)/graphene oxide composite nanofibers: effects of graphene oxide reduction

In this article, we report on the production by electrospinning of P3HT/PEO, P3HT/PEO/GO, and P3HT/PEO/rGO nanofibers in which the filler is homogeneously dispersed and parallel oriented along the fibers axis. The effect of nanofillers' presence inside nanofibers and GO reduction was studied, in order to reveal the influence of the new hierarchical structure on the electrical conductivity and mechanical properties. An in‐depth characterization of the purity and regioregularity of the starting P3HT as well as the morphology and chemical structure of GO and rGO was carried out. The morphology of the electrospun nanofibers was examined by both scanning and transmission electron microscopy. The fibrous nanocomposites are also characterized by differential scanning calorimetry to investigate their chemical structure and polymer chains arrangements. Finally, the electrical conductivity of the electrospun fibers and the elastic modulus of the single fibers are evaluated using a four‐point probe method and atomic force microscopy nanoindentation, respectively. The electrospun materials crystallinity as well as the elastic modulus increase with the addition of the nanofillers while the electrical conductivity is positively influenced by the GO reduction. Copyright © 2016 John Wiley & Sons, Ltd.     

Mechanical property and corrosion resistance of zirconia/polydopamine nanocomposite multilayer films fabricated via a novel non‐electrostatic layer‐by‐layer assembly technique

Zirconia/polydopamine (ZrO₂/PDA) nanocomposite multilayer films were constructed on Si substrate via a novel nonelectrostatic layer‐by‐layer (NELBL) assembly technique. The building block of this technique is the newly reported dopamine molecule, which can be attached to almost all material surfaces and undergo oxidation‐polymerization to form PDA layers; more importantly, the outer hydroxyl groups of the PDA layer can chelated with certain inorganic oxide nanoparticles to generate oxide films. Thus, ZrO₂/PDA nanocomposite multilayer films were fabricated by sequential NELBL deposition of PDA and ZrO₂ nanoparticles. The formation of the ZrO₂/PDA nanocomposite multilayer films was monitored by the water contact angle (WCA) and ellipsometric thickness measurements, while the microstructure of the fabricated films was analyzed by means of atomic force microscope (AFM), field emission scanning electron microscope (FESEM), X‐ray photoelectron spectrum (XPS), and X‐ray diffraction (XRD) analysis. The mechanical and anticorrosion behaviors of the annealed ZrO₂/PDA nanocomposite multilayers were found to be greatly enhanced as compared with that of the annealed homogeneous ZrO₂ film. The better mechanical and anticorrosion behaviors of the annealed ZrO₂/PDA nanocomposite multilayers than the annealed homogeneous ZrO₂ film may be closely related to their special microstructure. Namely, the organic–inorganic hybrid microstructure of the annealed ZrO₂/PDA nanocomposite multilayers may largely account for the increased nanohardness and corrosion resistance. Copyright © 2010 John Wiley & Sons, Ltd.     

Thickness and annealing temperature effects on the optical properties and surface morphology of layer‐by‐layer poly(p‐phenyline vinylene)+dodecylbenzenesulfonate films

The fabrication of controlled molecular architectures is essential for organic devices, as is the case of emission of polarized light for the information industry. In this study, we show that optimized conditions can be established to allow layer‐by‐layer (LbL) films of poly(p‐phenylene vinylene) (PPV)+dodecylbenzenesulfonate (DBS) to be obtained with anisotropic properties. Films with five layers and converted at 110 °C had a dichroic ratio δ = 2.3 and order parameter r = 34%, as indicated in optical spectroscopy and emission ellipsometry data. This anisotropy was decreased with the number of layers deposited, with δ = 1.0 for a 75‐layer LbL PPV + DBS film. The analysis with atomic force microscopy showed the formation of polymer clusters in a random growth process with the normalized height distribution being represented by a Gaussian function. In spite of this randomness in film growth, the self‐covariance function pointed to a correlation between clusters, especially for thick films. In summary, the LbL method may be exploited to obtain both anisotropic films with polarized emission and regular, nanostructured surfaces. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Synthesis and magnetic properties of organic multilayer films based on the layer‐by‐layer assembly

Two polymers containing pyridine rings were prepared by free‐radical polymerization and confirmed by Fourier transform infrared and ¹H NMR spectra. The preparation of four multilayer films that were obtained by self‐assembly of the polymer and the transition metal neutralized polyelectrolyte on PE substrate was described. UV–vis spectra and atomic force microscopy images were applied to characterize these films and indicate the uniform assembling process. The driving force for building up the multilayer films was identified by infrared spectroscopy to be the coordination interaction. The magnetic behavior was examined as a function of magnetic field strength at 30 kOe and as a function of temperature (5–300 K). All films display strong soft ferromagnetic properties and higher than those of the bulk materials. The magnetic results show that the layer‐by‐layer self‐assembling approach is beneficial to the ordered alignment of adjacent paramagnetic spins and induces better magnetic phenomena. Copyright © 2015 John Wiley & Sons, Ltd.     

Thin‐film composite membranes incorporated with large‐area graphene oxide sheets and adjustable surface charges

In this research, composite membranes were prepared by cross‐linking of poly(vinyl alcohol) (PVA) and glutaraldehyde (GA) on amidoximated ultrafiltration membrane. During this procedure, it was taken advantage of large‐area graphene oxide sheets as graphitic nets in the active layer. These membranes were used to remove an industrial textile dye (Chrysophenine GX) from wastewater. Optimum condition for membrane preparation was 1.5% wt. of PVA, 1.5% wt. of GA, and 0.3% wt. of graphene oxide sheets. Permeation results showed that electrostatic charges on membrane surface have easily converted from positive into negative ones. Contact angle was significantly decreased (63.5° to 28.8°). Final nanofiltration membrane showed lowest fouling rate during removing the industrial direct dye (flux recovery ratio: 96.60%, reversible fouling ratio: 23.82%, and irreversible fouling ratio: 3.39%). Pore size of this membrane was <8 nm, and Chrysophenine GX was eliminated by 98.5% with water permeability of 12.23 L/m².h.bar.     

Layer‐by‐layer ionomer films made from poly(styrene‐co‐styrenesulfonic acid) and poly(methyl methacrylate‐co‐4‐vinylpyridine) in tetrahydrofuran

Thin films were fabricated layer‐by‐layer (LbL) via ionic bonds formed between a cationic ionomer and an anionic ionomer, which were produced via proton transfer from poly(styrene‐co‐styrenesulfonic acid) to poly(methyl methacrylate‐co‐4‐vinylpyridine) in an organic solvent, tetrahydrofuran. Ionic contents of the ionomers were very low down to 5.6 mol %, much lower than usual polyelectrolytes. The build up of the LbL films was demonstrated by UV/vis spectroscopy: the absorbance of the phenyl rings in styrene residues increased with the number of depositions (thus the number of layers). Transmission electron microscopy observation of strained thin films showed unique deformation mode, involving many bands that developed both in the parallel and perpendicular directions to the stress axis. This is quite different from the deformation modes seen for ionomer blend films and for coextruded polystyrene/poly(methyl methacrylate) multilayer tapes. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 50: 101–105, 2012     

Preparation and characterization of layer‐by‐layer self‐assembly membrane based on sulfonated polyetheretherketone and polyurethane for high‐temperature proton exchange membrane

A concept of preparing high‐temperature proton exchange membranes with layer‐by‐layer (LBL) self‐assembly technique was proposed and the sulfonated polyetheretherketone (SPEEK) and polyurethane (PU) with 200 LBL deposition cycles denoting (SPEEK/PU)₂₀₀ membrane was prepared in this research. Owing to the strong electrostatic interaction between ? group in SPEEK and ? C? N⁺ group in PU, (SPEEK/PU)₂₀₀ membrane with LBL self‐assembly structure showed a favorable structural stability. The phosphoric acid (PA)‐doped (SPEEK/PU)₂₀₀ membrane showed a higher proton conductivity relative to PA doped SPEEK/PU membrane by solution casting method (SPEEK/PU)₂₀₀/40%PA membrane possessed a proton conductivity value of 2.90 × 10^?2 S/cm at 150 °C under anhydrous conditions. The LBL self‐assembly structure provided a possibility to reduce the negative effect from polymer skeleton blocking charge carrier species even immobilizing protons. Moreover, the (SPEEK/PU)₂₀₀ membrane presented the particularly noteworthy mechanical property even with PA doping. The tensile stress values at break were 72.8 and 24.1 MPa, respectively, for (SPEEK/PU)₂₀₀ and (SPEEK/PU)₂₀₀/40%PA membrane at room temperature, which were obviously higher than the reported values of 15.9 and 2.81 MPa for SPEEK/PU and SPEEK/PU/60%PA membrane. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 3446–3454     

Dynamic mechanical and dielectrical properties of poly(vinyl alcohol) and poly(vinyl alcohol)‐based nanocomposites

In this article we report on the investigation of the dynamics of poly(vinyl alcohol) (PVA) and PVA‐based composite films by means of dielectric spectroscopy and dynamic mechanical thermal analysis. Once the characterization of pure PVA was done, we studied the effect of a nanostructured magnetic filler (nanosized CoFe₂O₄ particles homogeneously dispersed within a sulfonated polystyrene matrix) on the dynamics of PVA. Our results suggest that the α‐relaxation process, corresponding to the glass transition of PVA, is affected by the filler. The glass‐transition temperature of PVA increases with filler content up to compositions of around 10 wt %, probably as a result of polymer–filler interactions that reduce the polymer chain mobility. For filler contents higher than 10 wt %, the glass‐transition temperature of PVA decreases as a result of the absorption of water that causes a plasticizing effect. The β‐ and γ‐relaxation processes of PVA are not affected by the filler as stated from both dynamic mechanical thermal analysis and dielectric spectroscopy. Nevertheless, both relaxation processes are greatly affected by the moisture content. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 1968–1975, 2001     

Optical and physical properties of iridescent photonic crystals obtained by self‐assembled polymethyl methacrylate nanospheres within graphene oxide nanoplatelets

Opal photonic crystals prepared by vertical templating of polymethyl methacrylate (PMMA) nanospheres in aqueous graphene oxide (GO) solutions were successfully obtained. The results show that increasing the PMMA nanospheres' size leads to the modification of the d‐spacing in GO nanoplatelets, inducing brilliant iridescence colors that span the entire visible electromagnetic spectrum. Scanning electron microscopy study shows a uniform distribution of GO nanoplatelets on the surface and the bulk of the opal photonic crystals. The reflectance spectra exhibit a significant red shift from 385 to 660 nm when the nanospheres' size increases from 160 to 306 nm, respctively. The Raman spectra show a systematic decrease in the intensity ratio of the D to G bands of GO (I_D/I_G), suggesting a partial reduction of graphene oxide with decrasing the extent of defects in the partially reduced GO nanoplatelets. This finding is confirmed by the significant decrease observed in the intensity of the hydroxyl band in the attenuated total reflectance mode‐Fourier transform infrared spectra of the photonic crystals. The results provide the first demonstrated example of intercalated assemblies of polymer nanospheres within GO nanosheets, leading to photonic crystals with brilliant iridescence colors that span the entire visible electromagnetic spectrum and can be tuned only by varying the size of the PMMA nanospheres.     

Properties of a novel thermal sensitive polymer based on poly(vinyl alcohol) and its layer‐by‐layer assembly

Structurally modified poly(vinyl alcohol) (PVA) was prepared as novel thermally sensitive polymers by partially acetalyzing and/or ionizing the commercially available PVA. Their aqueous solutions experience completely reversible polymer aggregation and dissolution above and below the lower critical solution temperature (LCST), respectively. The LCST of a partially acetalyzed PVA (APVA) can be readily controlled by the degree of acetalysis or the molecular weight of the starting PVA. Introduction of a small amount of cationic group onto the APVA backbone increases the LCST obviously, while the LCST is highly sensitive to NaCl concentration. Then APVA and cationic APVA multilayers are assembled on rayon to make a thermal responsive fiber. The atomic force microscopy (AFM) images of the surface reveal the increment of roughness stimulated by temperature. Copyright © 2007 John Wiley & Sons, Ltd.     

Zirconium (IV) porphyrin graphene oxide: a new and efficient catalyst for the synthesis of 3,4‐dihydropyrimidin‐2(1H)‐ones

A covalently cross‐linked graphene oxide (GO) as a catalyst was prepared by a cross‐linking process using the nucleophilic reaction of zirconium (IV)‐coordinated 5,10,15,20‐tetrakis (aminophenyl)porphyrin (ZrPPh) with carboxyl groups of the edges of GO (GO‐ZrPPh). The chemical structure of catalyst was characterized by different analyses such as FT‐IR, SEM, TEM, EDS, ICP, TGA and UV. All analyses confirm the occurrence of successfully covalent immobilization of ZrPPh on the GO. Also, TEM and SEM images show that ZrPPh has been immobilized in the both of the edges and the basal plane of GO. The activity of the catalyst was studied for the synthesis of 3,4‐dihydropyrimidin‐2(1H)‐ones via Biginelli reaction. The cross‐linked catalyst is able to catalyze the reaction in short reaction times and good to excellent yields.     

Mechanical properties and degradation studies of poly(D,L‐lactide‐co‐glycolide) 50:50/graphene oxide nanocomposite films

Poly(D,L‐lactide‐co‐glycolide) 50:50 (PLGA)/graphene oxide (GO) nanocomposite films were prepared with various GO weight fractions. A significant enhancement of mechanical properties of the PLGA/GO nanocomposite films was obtained with GO weight fractions. The incorporation of only 5 wt% of GO resulted in an ~2.5‐fold and ~4.7‐fold increase in the tensile strength and Young's modulus of PLGA, respectively. The thermomechanical behaviors of composite films were investigated by dynamic mechanical analysis. Results indicated that the values of T_g and storage moduli of the PLGA/GO composites were higher than those of the pristine PLGA. The improvement in oxygen barrier properties of composites was presumably attributed to the filler effect of the randomly dispersed GO throughout the PLGA matrix. In this work, we also studied in vitro biodegradation behavior. PLGA/GO composite films were hydrolyzed at 37°C for periods up to 49 days. Because of the presence of GO nanosheets, degradation of composite films took place more slowly with increasing GO amounts. Copyright © 2013 John Wiley & Sons, Ltd.     

Relationships between molecular structure and thermomechanical properties of bio‐based thermosetting polymers

Molecular dynamics simulations are used to study highly cross‐linked epoxy networks comprised of furanyl epoxy monomer, 2,5‐bis[(2‐oxiranylmethoxy)methyl]‐furan (BOF), that is cross‐linked by two furanyl amine hardeners, 5,5'‐methylenedifurfurylamine (DFDA) and 5,5'‐ethylidenedifurfirylamine (CH₃‐DFDA). Important properties of these fully furan‐based systems, including room temperature density, glass transition temperature, and Young's modulus are found to agree with previous experimental results. We also compare the simulated and experimental values of four fully furan‐based thermosetting materials to those using the conventional resin diglycidyl ether of bisphenol A (DGEBA) cured with the two furanyl hardeners. Our simulation results predict a slight decrease in density and Young's modulus, but no impact on the glass transition temperature, upon adding the methyl group in DFDA. Detailed analyses of the MD trajectories reveal the underlying mechanisms responsible for the observed structure/property relations, which center on the lack of collinear covalent bonds in the BOF molecular structure. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 285–292