Exploring Network Formation of Tough and Biocompatible Thiol‐yne Based Photopolymers

This work deals with the in‐depth investigation of thiol‐yne based network formation and its effect on thermomechanical properties and impact strength. The results show that the bifunctional alkyne monomer di(but‐1‐yne‐4‐yl)carbonate ( DBC ) provides significantly lower cytotoxicity than the comparable acrylate, 1,4‐butanediol diacrylate ( BDA ). Real‐time near infrared photorheology measurements reveal that gel formation is shifted to higher conversions for DBC /thiol resins leading to lower shrinkage stress and higher overall monomer conversion than BDA . Glass transition temperature (T_g), shrinkage stress, as well as network density determined by double quantum solid state NMR, increase proportionally with the thiol functionality. Most importantly, highly cross‐linked DBC /dipentaerythritol hexa(3‐mercaptopropionate) networks (T_g ≈ 61 °C) provide a 5.3 times higher impact strength than BDA , which is explained by the unique network homogeneity of thiol‐yne photopolymers.

     

Controllable glycosylation of polyphosphazene via radical thiol–yne click chemistry

We describe a versatile approach to synthesize glycosylated polyphosphazenes with controllable density of glycosyl groups. These glycopolymers have been synthesized by the nucleophilic substitution of poly(dichlorophosphazene) with propargylamine and subsequent “thiol–yne” click reaction between poly[di(propargylamine)phosphazene] and 2,3,4,6‐tetra‐O‐acetyl‐1‐thio‐β‐D ‐glucopyranose (SH‐GlcAc₄). The polymers were characterized with FTIR and ¹H NMR. We found that the high steric hindrance of SH‐GlcAc₄ plays a key role in the overall reaction process, and ～55% of the alkyne groups participate in the “thiol–yne” click reaction. About 8% of the alkyne groups convert to alkene groups at the end of click reaction. The substitution of alkyne/alkane mixture was conducted to reduce the alkyne density in the side groups of polyphosphazenes and minimize the influences of this steric effect. Mixed‐substituent polyphosphazene was synthesized with 2:3 ratio of alkyne and alkane. In this case, almost no alkyne group remains after the “thiol–yne” click reaction, and thus the glycosylated polyphosphazene is able to form into micelles through self‐assembly process. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

A novel polymerization approach via thiol‐yne addition

The ability of thiyl radicals to add to terminal unsaturations in an efficient way made them considered being one of the click reactions. Recently, thiol‐yne addition reactions have been used extensively for the synthesis of crosslinked networks and dendrimers and postpolymerization functionalization protocols. Herein, we report a novel step‐growth type reaction for highly functional linear polymers using a monoalkyne and dithiol compound. First, we investigated the model reaction between 1‐octyne and 1‐octanethiol as well as 1,4‐butanedithiol compounds, which were initiated via self‐, thermal‐, and UV‐initiation; the UV‐initiation was found to be the most efficient method and completed within 2‐h reaction time. The same conditions were applied for the polymerization of four different functional alkynes bearing different functional groups with two dithiol compounds. All polymerizations resulted in highly functional linear polymers with number averaged molecular weights ranging from 5 to 30 kDa, except for propargylic acid and its methyl ester, where only oligomers formed. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Lipidic polyols using thiol‐ene/yne strategy for crosslinked polyurethanes

Oleic acid and α,ω‐diacid were converted into propargylic esters followed by thiol‐ene/yne coupling (TEC/TYC) functionalization in presence of mercaptoethanol. The multiradical addition on fatty esters leads to the formation of lipidic polyols (OH1 and OH2), as judged by ¹H NMR and mass spectroscopies as well as by size exclusion chromatography. The crosslinking reaction between TEC/TYC‐based polyols and 4,4′‐methylene bis(phenylisocyanate) isocyanate reactant was monitored by FTIR experiment and reaction parameters were optimized. By differential scanning calorimetry, relatively high glass transitions are measured corresponding to structure with little or without dangling chain. Moreover, the thermal stability of the resulting plant oil‐based polyurethane materials (PU1 and PU2) were found to be fully consistent with that of other lipidic PUs respecting a three‐step process. Thanks to TYC methodology, fatty α,ω‐diacid produces lipidic polyol without dangling chain and lipidic thermoset PU with relatively high T_g. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1597–1606     

Silicon‐based mercaptans: High‐performance monomers for thiol‐ene photopolymerization

Ester‐free silane and siloxane‐based thiol monomers were successfully synthesized and evaluated for application in thiol‐ene resins. Polymerization reaction rates, conversion, network properties as well as degradation experiments of those thiol monomers in combination with triallyl‐1,3,5‐triazine‐2,4,6(1H,3H,5H)‐trione (TATT) as ene component were performed and compared with formulations containing the commercially available mercaptopropionic ester‐based thiol pentaerythritol tetra‐3‐mercaptopropionate. Kinetic analysis revealed appropriate reaction rates and conversions reaching 90% and higher. Importantly, storage stability tests of those formulations clearly indicate the superiority of the synthesized mercaptans compared with pentaerythritol tetra‐3‐mercaptopropionate/TATT resins. Moreover, photocured samples containing silane‐based mercaptans provide higher glass transition temperatures and withstand water storage without a significant loss in their network properties. This behavior together with the observed excellent degradation resistance of photocured silane‐based thiol/TATT formulations make these multifunctional mercaptans interesting candidates for high‐performance applications, such as dental restoratives and automotive resins. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 418–424     

Sequential thiol‐ene/thiol‐ene and thiol‐ene/thiol‐yne reactions as a route to well‐defined mono and bis end‐functionalized poly(N‐isopropylacrylamide)

Sequential thiol‐ene/thiol‐ene and thiol‐ene/thiol‐yne reactions have been used as a facile and quantitative method for modifying end‐groups on an N‐isopropylacrylamide (NIPAm) homopolymer. A well‐defined precursor of polyNIPAm (PNIPAm) was prepared via reversible addition‐fragmentation chain transfer (RAFT) polymerization in DMF at 70 °C using the 1‐cyano‐1‐methylethyl dithiobenzoate/2,2′‐azobis(2‐methylpropionitrile) chain transfer agent/initiator combination yielding a homopolymer with an absolute molecular weight of 5880 and polydispersity index of 1.18. The dithiobenzoate end‐groups were modified in a one‐pot process via primary amine cleavage followed by phosphine‐mediated nucleophilic thiol‐ene click reactions with either allyl methacrylate or propargyl acrylate yielding ene and yne terminal PNIPAm homopolymers quantitatively. The ene and yne groups were then modified, quantitatively as determined by ¹H NMR spectroscopy, via radical thiol‐ene and radical thiol‐yne reactions with three representative commercially available thiols yielding the mono and bis end functional NIPAm homopolymers. This is the first time such sequential thiol‐ene/thiol‐ene and thiol‐ene/thiol‐yne reactions have been used in polymer synthesis/end‐group modification. The lower critical solution temperatures (LCST) were then determined for all PNIPAm homopolymers using a combination of optical measurements and dynamic light scattering. It is shown that the LCST varies depending on the chemical nature of the end‐groups with measured values lying in the range 26–35 °C. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3544–3557, 2009     

Heterofunctional RAFT‐derived PNIPAM via cascade trithiocarbonate removal and thiol‐yne coupling click reaction

An efficient one‐pot process to functionalize the α‐ and ω‐positions of RAFT‐derived poly(N‐isopropylacrylamide) (PNIPAM) by two inherently different mechanistic pathways is reported. The method relies on the RAFT polymerization of NIPAM using a new alkyne‐based RAFT agent, namely 2‐cyano‐5‐oxo‐5‐(prop‐2‐yn‐1‐ylamino)pentan‐2‐yl dodecyltrithiocarbonate (COPYDC) and the combination of thiol‐yne click chemistry and thiocarbonylthio chain‐end removal reactions. COPYDC was prepared in good yield and used as an efficient chain transfer agent during the RAFT polymerization of NIPAM. Well‐defined polymers with controlled molar masses ( = 7500–14,700 g.mol^?1) and narrow dispersities (? = 1.18–1.26) are thus obtained. Cascade thiol‐yne click reaction at the alkyne α‐chain end and trithiocarbonate removal at the ω‐chain end are successfully achieved using benzyl mercaptan and excess AIBN. The reported method provides a facile and mild route to heterofunctional telechelic RAFT polymers with predictable molar masses and low dispersities. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 3597–3606     

Thiol‐yne Click Adamantane Monolithic Stationary Phase for Capillary Electrochromatography

A porous crosslinked organic polymer based on N‐acryloxysuccinimide (NAS) and ethylene dimethacrylate (EDMA) was prepared inside 75 µm i.d. fused silica capillary as functionalizable monolithic stationary phase for electrochromatographic applications. Succinimide groups on the monolith surface provide reactive sites able to react readily through standard electrophile‐nucleophile chemistry. Propargylamine was used to prepare alkyne functionalized poly(NAS‐co‐EDMA). Onto this thiol‐reactive polymer surface was grafted adamantane units via a photochemically‐driven addition reaction. Chemical characterization was performed in situ after each synthetic step by means of Raman spectroscopy and grafting kinetics was investigated to ensure quantitative grafting of 1‐adamantanethiol. The as‐designed monolithic stationary phase exhibited typical reversed‐phase separation mechanism as evidenced by the linear increase of the logarithm of retention factor of neutral aromatic solutes with the increase of the aqueous buffer content in the mobile phase.     

Facile synthesis of dendrimers combining aza‐Michael addition with Thiol‐yne click chemistry

We report a highly efficient approach to prepare dendrimers by taking advantage of the orthogonal characteristic of aza‐Michael addition and thiol‐yne reactions. A fifth generation dendrimer was synthesized within five steps without protection/activation procedures. The reactions proceed under benign conditions without byproducts, and the target products can be easily purified via extraction or precipitation without chromatography. The structure of each generation dendrimer was characterized using NMR spectroscopy, size exclusion chromatography, and mass spectrometry. The obtained dendrimers can have peripheral amine or alkyne groups. We demonstrated that these groups can be used for selective and specific conjugation with various functional groups. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Reactive Polymer Coatings: A General Route to Thiol‐ene and Thiol‐yne Click Reactions

Reactive polymer coatings were synthesized via chemical vapor deposition (CVD) polymerization process. These coatings decouple surface design from bulk properties of underlying materials and provide a facile and general route to support thiol‐ene and thiol‐yne reactions on a variety of substrate materials. Through the reported technique, surface functions can be activated through a simple design of thiol‐terminated molecules such as polyethylene glycols (PEGs) or peptides (GRGDYC), and the according biological functions were demonstrated in controlled and low‐fouling protein adsorptions as well as accurately manipulated cell attachments.     

Convenient Synthesis of Functionalized Bis‐ureidopyrimidinones Based on Thiol‐yne Reaction

The preparation of functionalized bis‐ureidopyrimidinones ( Bis‐UPy ) through the thiol‐yne reaction is described. Various Bis‐UPys with different functional groups were synthesized by using the readily available functionalized alkynes and UPy‐thiol to affirm the simplicity and versatility of the methodology.     

Radical Thiol‐yne Chemistry on Diphenylacetylene: Selective and Quantitative Addition Enabling the Synthesis of Hyperbranched Poly(vinyl sulfide)s

A powerful variation of traditional radical thiol‐yne reaction with diphenylacetylene (DPA)‐based starting materials leading to the quantitative and selective formation of the corresponding vinyl sulfides is reported. A variety of different thiols are shown to undergo reaction with DPA and the influence of their structure on reactivity is studied. The results obtained from the model reactions are then used to guide the efficient synthesis of hyperbranched poly(vinyl sulfide) (hb‐PVS) systems by employing a dithiol and a trialkyne in an A₂ + B₃ approach. The polymers obtained show excellent solubility in common organic solvents and exhibit high refractive indices (e.g., 1.70 at 589 nm). The combined ease of processability and potential for cross‐linking make these materials very interesting for applications, such as coatings for optical devices. The selective mono‐addition thiol‐yne reaction on DPA serves not only as a synthetic method for the preparation of PVS but could also be applied to the general modification of acetylene‐containing materials.

     

Step‐growth thiol–thiol photopolymerization as radiation curing technology

This report introduces a novel UV‐curing technology based on thiol–thiol coupling for polydisulfide network formation. Beginning with a model tris(3‐mercaptopropionate) trithiol monomer and xanthone propionic acid‐protected guanidine as photobase generator, a comprehensive characterization based on spectroscopic techniques supports the reaction of thiols into disulfides without side reactions. The best experimental conditions are described as regards to film thickness, irradiance, emission wavelength, and atmosphere composition. The results shed light on a step‐growth photopolymerization mechanism involving two steps: first, the formation of thiyl radicals by thiolate air oxidation or/and thiol photolysis, and second, their recombination into disulfide. By varying thiol functionality and structure, oligomer chain length and monomer/oligomer ratio, the network architecture can be finely tuned. The molecular mobility of the polydisulfide network is crucial to high thiol conversion rates and yields as revealed by ¹H T₂ NMR relaxation measurements. Ultimately, spatial control enables the formation of a photopatterned poly(disulfide) film, used as next‐generation high refractive index photoresist. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 117–128.     

Photopolymerization of thiol‐ene systems based on oligomeric thiols

Thiol oligomers were copolymerized with a triallyl ether by a photoinduced polymerization process. These oligomeric thiol‐ene systems comprise the same components as a photopolymerized thiol‐ene‐acrylate ternary system, yet the photopolymerized networks have much lower glass transition temperatures. An investigation into the effect of oligomeric thiol design on network formation was conducted by analyzing the reaction kinetics and thermal/mechanical properties of the thiol‐ene networks. Real‐time FTIR analysis shows that total conversion is >90% for all thiols investigated. Photo‐DSC analysis shows that the maximum exotherm rate is roughly equivalent for all of the thiols when the equivalent weight of the thiol is taken into account. As would be expected, the glass transition temperature and tensile strength increase with thiol functionality and lower thiol equivalent weight for thiols with functionality from 2 to 4. Films made using the oligomeric thiols have essentially the same glass transition temperatures and tensile modulus values regardless of thiol design. These results distinguish the method for generation of networks consisting of an initial Michael reaction of thiols and acrylates followed by a photoinitiated copolymerization with a multifunctional ene from the traditional photolysis of the corresponding thiol‐ene‐acrylate ternary systems with no Michael reaction. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 14–24, 2009     

Living radical photopolymerization induced grafting on thiol–ene based substrates

The formation of reactive substrates with iniferter‐mediated living radical photopolymerization is a powerful technique for surface modification, which can readily be used to facilitate the incorporation of a variety of surface functionalities. In this research, the photopolymerization kinetics of novel bulk thiol–ene systems have been compared with those of typical acrylate and methacrylate systems when polymerized in the presence of the photoiniferter p‐xylene bis(N,N‐diethyl dithiocarbamate) (XDT). In the presence of XDT, the thiol–ene systems photopolymerize more quickly than the traditional acrylate and methacrylate systems by one to two orders of magnitude. Fourier transform infrared spectroscopy has been used to monitor the photografting kinetics of various monomers on dithiocarbamate‐functionalized surfaces. Furthermore, this technique has been used to evaluate surface‐initiation kinetics and to emphasize the influence of bulk substrate properties on grafting kinetics. Finally, photopatterning has been demonstrated on a dithiocarbamate‐incorporated thiol–ene substrate with conventional photolithographic techniques. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2134–2144, 2005     

The power of thiol‐ene chemistry

As a tribute to Professor Charlie Hoyle, we take the opportunity to review the impact of thiol‐ene chemistry on polymer and materials science over the past 5 years. During this time, a renaissance in thiol‐ene chemistry has occurred with recent progress demonstrating its unique advantages when compared with traditional coupling and functionalization strategies. Additionally, the robust nature of thiol‐ene chemistry allows for the preparation of well‐defined materials with few structural limitations and synthetic requirements. To illustrate these features, the utility of thiol‐ene reactions for network formation, polymer functionalization, dendrimer synthesis, and the decoration of three‐dimensional objects is discussed. Also, the development of the closely related thiol‐yne chemistry is described. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 743–750, 2010