Post‐functionalization of perfluorophenyl ester‐functional acyclic diene metathesis polymer

The acyclic diene metathesis (ADMET) polymerization was utilized for the design of the ADMET polymer (M_n = 21,200 g/mol, M_w/M_n = 1.74) with pendant perfluorophenyl ester functionality using Grubbs first generation catalysis overnight in bulk at 80 °C. Next, a wide variety of functional groups, like benzyl, octyl, propargyl, allyl, and furfuryl was quantitatively incorporated to the ADMET polymer backbone through various amines using activated ester substitution reaction. The ADMET polymers studied in this work were characterized using ¹H, ¹³C, and ¹⁹F NMR, GPC and DSC and displayed a monomodal distribution and a rather broad polydispersity index in the range of ?1.33 to 1.90. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2593–2598     

Pendant cyclic carbonate‐polymer/Na‐smectite nanocomposites via in situ intercalative polymerization and solution intercalation

Nanocomposites of sodium smectite with polyether‐ and polystyrene‐containing pendant cyclic carbonates offer a novel approach to improving hydraulic barrier properties of Na‐smectite liners to saline leachates. The cyclic carbonate polyethers were prepared by cationic ring opening polymerization of a cyclic carbonate‐containing epoxide, whilst polystyrene polymers having pendant cyclic carbonate groups were obtained from radical photopolymerization of styrene. Na‐smectite nanocomposites of these polymers were formed via clay in situ polymerization and solution intercalation methods. X‐ray diffraction (XRD) and FT‐IR analysis confirmed that the polyether can be intercalated within the layers of smectite via in situ as well as solution intercalation of the pre‐formed polymer. The cyclic carbonate polyether nanocomposite was more resistant to leaching in 3M aqueous sodium chloride than its respective cyclic carbonate. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2421–2429     

Design and Synthesis of Aromatic Polyesters Bearing Pendant Clickable Maleimide Groups

A bisphenol bearing pendant maleimide group, namely, N‐maleimidoethyl‐3, 3‐bis(4‐hydroxyphenyl)‐1‐isobenzopyrrolidone (PPH‐MA) was synthesized starting from phenolphthalein. Aromatic (co)polyesters bearing pendant maleimide groups were synthesized from PPH‐MA and aromatic diacid chlorides, namely, isophthaloyl chloride (IPC), terephthaloyl chloride (TPC), and 50:50 mol % mixture of IPC and TPC by low temperature solution polycondensation technique. Copolyesters were also synthesized by polycondensation of different molar proportions of PPH‐MA and bisphenol A with IPC. Inherent viscosities and number‐average molecular weights of aromatic (co)polyesters were in the range of 0.52–0.97 dL/g and 20,200–32,800 g/mol, respectively indicating formation of medium to reasonably high‐molecular‐weight polymers. ¹³C NMR spectral analysis of copolyesters revealed the formation of random copolymers. The 10% weight loss temperature of (co)polyesters was found in the range 470–484 °C, indicating their good thermal stability. A selected aromatic polyester bearing pendant maleimide groups was chemically modified via thiol‐maleimide Michael addition reaction with two representative thiol compounds, namely, 4‐chlorothiophenol and 1‐adamantanethiol to yield post‐modified polymers in a quantitative manner. Additionally, it was demonstrated that polyester containing pendant maleimide groups could be used to form insoluble crosslinked gel in the presence of a multifunctional thiol crosslinker. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 630–640     

Novel ABC miktoarm star terpolyphosphoesters: Facile construction and high‐flame retardant property

A combination of ring‐opening metathesis polymerization (ROMP), ring‐opening polymerization (ROP), and acyclic diene metathesis (ADMET) polymerization approach was first time utilized in the preparation of novel ABC miktoarm star terpolyphosphoesters (PPEs). Acrylate‐terminated monotelechelic PPE was first prepared through ROMP of 7‐membered cyclic phosphate monomer in the presence of a terminating agent, and then terminal acrylate group was readily converted, by thiol‐Michael addition click reaction and esterification, to a heterodifunctional PPE with hydroxyl and acrylate groups, which was a key precursor for the preparation of ABC miktoarm terpolymers. ROP of the cyclic phosphoester monomer initiated by this PPE was successively carried out to generate the acrylate‐functionalized block PPE, which utilized as a selective macromolecular chain stopper in subsequent ADMET polymerization of α,ω‐diene phosphate monomer, finally producing miktoarm terpolyphosphoester. These prepared miktoarm star terpolyphosphoesters demonstrated superior thermal and flame retardant properties via TGA, limiting oxygen index, and microscale combustion calorimetry tests. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 692–701     

Facile synthesis of linear–hyperbranched polyphosphoesters via one‐pot tandem ROMP and ADMET polymerization and their transformation to architecturally defined nanoparticles

A convenient one‐pot synthesis of linear–hyperbranched polyphosphoesters (l–HBPPEs) was accomplished by a tandem ring‐opening metathesis polymerization (ROMP) and acyclic diene metathesis (ADMET) polymerization procedure. A linear monotelechelic poly(norbornene) with a terminal acrylate and many pendent thiol groups is first prepared through adding an internal cis‐olefin terminating agent to the reaction mixture immediately after the completion of the living ROMP, and then utilized as a macromolecular chain stopper in subsequent ADMET polymerization of a phosphoester functional AB₂ monomer, yielding l–HBPPEs as the reaction time prolonged. These l–HBPPEs bearing lots of pendent thiol groups in linear poly(norbornene) and peripheral acrylate groups in HBPPE could be self‐crosslinked in ultradilute solution through thiol‐Michael addition click reaction between acrylate and thiol to give single‐molecule nanoparticles with comparatively uniform size. This facile approach can be extended toward the fabrication of novel nanomaterials with sophisticated structures and tunable multifunctionalities. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 964–972     

Exploring amino acid‐tethered polymethacrylates as CO2‐sensitive macromolecules: A concealed property

Carbon dioxide (CO₂)‐responsive polymers have been gaining considerable interest because of their reactions with CO₂, giving rise to gas‐switchable properties, which can easily be reversed by mild heating or purging with inert gases. Herein, the synthesis of a series of side‐chain amino acids (alanine, leucine, isoleucine, phenylalanine, tryptophan) appending poly(meth)acrylates carrying primary amine (? NH₂) groups via reversible addition‐fragmentation chain transfer (RAFT) polymerization method was reported. It was found that alanine, leucine, isoleucine containing polymers displayed solubility–insolubility transition behavior and their associated property changes (solution transmittance, electrical conductivity, pH, zeta potential, and hydrodynamic diameter) in water upon alternate bubbling of CO₂/N₂ at room temperature. Among the three CO₂‐sensitive polymers only leucine based macromolecule was further chain extended with a thermoresponsive motif, di(ethylene glycol) methyl ether methacrylate (DEGMMA), via RAFT polymerization. CO₂‐tunable lower critical solution temperature and self‐assembling behavior of the diblock copolymer was carefully examined by UV–vis, ¹H NMR spectroscopy, dynamic light scattering (DLS), and field emission‐scanning electron microscopy (FE‐SEM) to establish dual thermo and gas‐tunable flip–flop micellizaion from the as‐synthesized block copolymer. Formation of polyammonium methacrylate bearing bicarbonate as counter anion is responsible for pendant primary amine containing polymer induced CO₂‐responsiveness. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2794–2803     

Novel thermotropic liquid crystalline‐cum‐photocrosslinkable polyvanillylidene alkyl/arylphosphate esters

A new class of linear unsaturated polyphosphate esters based on divanillylidene cyclohexanone possessing liquid crystalline‐cum‐photocrosslinkable properties have been synthesized from 2,6‐bis[n‐hydroxyalkyloxy(vanillylidene)]cyclohexanone [n = 6,8,10] with various alkyl/aryl phosphorodichloridates in chloroform at ambient temperature. The resultant polymers were characterized by intrinsic viscosity, FT‐IR, ¹H, ¹³C, and ³¹P‐NMR spectroscopy. All the polymers showed anisotropic behavior under hot stage optical polarized microscope (HOPM). The liquid crystalline textures of the polymers became more transparent with increasing spacer length. The thermal behavior of the polymers was studied by thermogravimetric analysis and differential scanning calorimetry. The T_g, T_m, and T_i of the polymers decreased with increasing flexible methylene chain. The photocrosslinking property of the polymer was investigated by UV light/UV spectroscopy; the crosslinking proceeds via 2π‐2π cycloaddition reactions of the divanillylidene exocyclic double bond of the polymer backbone. The pendant alkyloxy containing polymers show faster crosslinking than the pendant phenyloxy containing polymers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5215–5226, 2004     

Triptycene‐containing polyetherolefins via acyclic diene metathesis polymerization

Several new triptycene‐containing polyetherolefins were synthesized via acyclic diene metathesis (ADMET) polymerization. The well‐established mechanism, high selectivity and specificity, mild reaction conditions, and well‐defined end‐groups make the ADMET polymerization a good choice for studying systematic variations in polymer structure. Two types of triptycene‐based monomer with varying connectivities were used in the synthesis of homopolymers, block copolymers, and random copolymers. In this way, the influence of the triptycene architecture and concentration in the polymer backbone on the thermal behavior of the polymers was studied. Inclusion of increasing amounts of triptycene were found to increase the glass transition temperature, from ?44 °C in polyoctenamer to 59 °C in one of the hydrogenated triptycene homopolymers ( H‐PT2 ). Varying the amounts and orientations of triptycene was found to increase the stiffness ( H‐PT1 ), toughness ( PT1₁‐b‐PO₁ ) and ductility ( PT1₁‐ran‐PO₃ ) of the polymer at room temperature. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis and characterization of functional polyethylene with regularly distributed thioester pendants via ring‐opening metathesis polymerization

Four kinds of functional polyethylene carrying thioester pendants were synthesized via ring‐opening metathesis polymerization (ROMP) of alkyl cyclopent‐3‐enecarbothioate catalyzed by a ruthenium‐based commercial catalyst and subsequent hydrogenation of the ROMP products (alkyl = ethyl, n‐butyl, n‐octyl, or n‐dodecyl). In these polymers the pendant alkyl thioester groups are precisely distributed along the backbone on every five methylene carbons. Chain structure, molecular weight and molecular weight distribution of the polymers were characterized by ¹H and ¹³C NMR, and GPC. The ROMP reactions all reached high monomer conversions, and hydrogenation of the ROMP products were exhaustive. Thermal transitions and side chain crystallization behaviors of the polymer were investigated and characterized by DSC and TGA. Glass transition temperature and melting temperature of these polymers were higher than the counterparts containing ester pendants. TGA analysis indicated that all the thioester‐containing polymers exhibited moderate thermal stability, and the sulfur‐containing polymers show slightly lower thermal stability than their counterparts without sulfur. The new family of functionalized polyethylenes could be used as models of ethylene‐thioacrylate copolymers, and find applications as novel functional materials. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 4027–4036     

Facile one‐pot synthesis and thermal cyclopolymerization of aryl bistrifluorovinyl ether monomers bearing reactive pendant groups

A diverse pool of aryl bistrifluorovinyl ether (BTFVE) compounds with reactive pendant groups were prepared in a facile, high yielding three step “one‐pot” synthesis from commercial 4‐bromo(trifluorovinyloxy)benzene. Monomers were confirmed from ATR–FTIR, ¹H, ¹³C, and ¹⁹F NMR, and HRMS analysis. Aryl BTFVE compounds were thermally polymerized to afford perfluorocyclobutyl (PFCB) aryl ether polymers with high number–average molecular weight (M_n) for homopolymers (17,050–27,090) and copolymers with 4,4′‐bis(trifluorovinyloxy)biphenyl monomers (27,860–56,500). The PFCB aryl ether homo‐ and copolymers collectively possess high thermal stability (>299 °C in N₂) and are readily solution processable producing optically transparent films. The thermal polymerization was achieved and reactive moieties remained intact, aside from those functionalized with acrylates. In the case with acrylate functionalized polymers, orthogonal polymerization was achieved by first photopolymerizing the acrylates followed by thermal curing of the aryl trifluorovinyl ether endgroups. Preliminary results in this study produced the successful preparation of photodefinable PFCB aryl ether material. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1887–1893, 2010     

Well‐defined polymers containing high density of pendant viologen groups

Atom transfer radical polymerization (ATRP) of a viologen‐containing methacrylate, 1‐propyl‐1′‐[2‐(methacryloyloxy)ethyl]‐4,4′‐bipyridinium dihexafluorophosphate, is reported. To achieve good polymerization control, it was essential to use the viologen‐based monomer with a hexafluorophosphate instead of halide counterion, and 2,2′‐bipyridine as the ligand for the Cu‐based ATRP catalyst. The solubility of produced cationic polymers could be tuned by anion metathesis: the polymers with hexafluorophosphate counterions were soluble in organic solvents (e.g., acetone, DMF), and those with chloride counterions were water‐soluble. In aqueous solutions, the polymers (chloride salts) formed large aggregates, the sizes of which ranged from about 200 to about 400 nm (based on dynamic light scattering measurements) depending on the molecular weight. Upon addition of electrolytes (e.g., NaCl), the aggregates underwent dissociation. The apparent diffusion coefficients of the aggregates existing in aqueous solutions and the products of their electrolyte‐induced dissociation were measured by diffusion‐ordered NMR spectroscopy. The association–dissociation processes were also studied by fluorescence spectroscopy: the aqueous polymer solutions, which were originally fluorescent (λ _em = 402 nm at λ _ex = 350 nm), lost their fluorescence in the presence of NaCl. The addition of small amounts of the viologen‐containing polyelectrolytes to solutions of inorganic salts (NaCl) altered the crystal morphology of the salts due to interaction of the multiple charged pendant groups with small ions. In the presence of reducing agents, the pendant viologen groups were converted to viologen radical‐cations, which are prone to dimerize reversibly in aqueous solutions. Indeed, marked dimerization of viologen radical cations (with absorbance maxima at 520 and 870 nm) was observed in relatively dilute aqueous solutions (4 mg mL^?1) upon addition of reducing agents (hydrazine). © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 55 , 1173–1182     

Synthesis and electro‐optical properties of light‐emitting polymers containing oxadiazole derivatives for light‐emitting diodes applications

Two PPV‐based bipolar polymers containing 1,3,4‐oxadiazole pendant groups were synthesized via the Gilch polymerization reaction for use in light‐emitting diodes (LEDs). The resulting polymers were characterized using ¹H and ¹³C NMR, elemental analysis, DSC, and TGA. These polymers were found to be soluble in common organic solvents and are easily spin‐coated onto glass substrates, producing high optical quality thin films without defects. The electro‐optical properties of ITO/PEDOT/polymer/Al devices based on these polymers were investigated using UV‐visible, PL, and EL spectroscopy. The turn‐on voltages of the OC₁Oxa‐PPV and OC₁₀Oxa‐PPV devices were found to be 8.0 V. The maximum brightness and luminescence efficiency of the OC₁Oxa‐PPV device were found to be 544 cd/m² at 19 V and 0.15 cd/A, respectively. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1098–1110, 2008     

Synthesis and characterization of crystalline graft polymer poly(ethylene oxide)‐g‐poly(ɛ‐caprolactone)2 with modulated grafting sites

The graft polymer poly(ethylene oxide)‐g‐poly(?‐caprolactone)₂ (PEO‐g‐PCL₂) with modulated grafting sites was synthesized by the combination of ring‐opening polymerization (ROP) mechanism, efficient Williamson reaction, with thiol–ene addition reaction. First, the precursor of PEO‐Allyl‐PEO with two terminal hydroxyl groups and one middle allyl group was prepared by ROP of EO monomers. Then, the macroinitiator [PEO‐(OH)₂‐PEO]_s was synthesized by sequential Williamson reaction between terminal hydroxyl groups and thiol–ene addition reaction on pendant allyl groups. Finally, the graft polymer PEO‐g‐PCL₂ was obtained by ROP of ?‐CL monomers using [PEO‐(OH)₂‐PEO]_s as macroinitiator. The target graft polymer and all intermediates were well characterized by the measurements of gel permeation chromatography, ¹H NMR, and thermal gravimetric analysis. The crystallization behavior was investigated by the measurements of differential scanning calorimetry, wide‐angle X‐ray diffraction and polarized optical microscope. The results showed that when the PCL content of side chains reached 59.2%, the crystalline structure had been dominated by PCL part and the crystalline structure formed by PEO part can be almost neglected. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2239–2247     

Orthogonally functionalizable copolymers based on a novel reactive carbonate monomer

A novel N‐hydroxy succinimide‐based carbonate monomer that allows direct synthesis of polymers incorporating a reactive carbonate group in the side chain was synthesized. This new monomer was copolymerized with methyl methacrylate and poly(ethylene glycol) methylether methacrylate using free‐radical polymerization to obtain organo‐ and water‐soluble reactive copolymers. Copolymerization of the activated carbonate monomer with an azide‐containing monomer and N‐hydroxy succinimide‐containing activated ester monomer provided orthogonally functionalizable copolymers. The pendant reactive carbonate groups of the copolymers were functionalized with amines to obtain carbamates. Polymers capable of orthogonal functionalization could be selectively functionalized as desired using subsequent 1,3‐dipolar cycloaddition or amidation reactions. The novel monomer and the copolymers were characterized by ¹H‐NMR, ¹³C‐NMR, and infrared spectroscopy. The efficient stepwise orthogonal functionalization of the copolymers were examined via ¹H‐NMR spectroscopy. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis,characterization, and thermal properties of a novel pentaerythritol‐initiated star‐shaped poly(p‐dioxanone)

A novel star‐shaped poly(p‐dioxanone) was synthesized by the ring‐opening polymerization of p‐dioxanone initiated by pentaerythritol with stannous octoate as a catalyst in bulk. The effect of the molar ratio of the monomer to the initiator on the polymerization was studied. The polymers were characterized with ¹H NMR and ¹³C NMR spectroscopy. The thermal properties of the polymers were investigated with differential scanning calorimetry and thermogravimetric analysis. The novel star‐shaped poly(p‐dioxanone) has a potential use in biomedical materials. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1245–1251, 2006     

Preparation of ureido group bearing polymers and their upper critical solution temperature in water

Poly(2‐ureidoethylmethacrylate) (PUEM_n) was synthesized via reversible addition‐fragmentation chain transfer (RAFT) radical polymerization and following polymer reaction. We prepared two PUEM_n samples with different degrees of polymerization (n = 100 and 49). The polymers exhibited upper critical solution temperature (UCST) in phosphate‐buffered saline (PBS) solution. The phase separation temperature (T_p) in PBS can be controlled ranging from 17 to 55 °C by changing molecular weight of the polymer, polymer concentration, and adding NaCl concentration. The polymers in PBS formed coacervate drops by liquid–liquid phase separations below T_p. Results of the dielectric relaxation measurement, the hydration number per monomeric unit was 5 above T_p. Based on a fluorescence study, the polymer formed slightly hydrophobic environments below T_p. The liquid–liquid phase separation was occurred presumably because of weak hydrophobic interactions and intermolecularly hydrogen bonding interactions between the pendant ureido groups. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2845–2854     

A versatile synthetic path to thiol containing polysiloxanes

A synthetic strategy to polydimethylsiloxanes and polymethylsiloxanes containing thiol functions as end‐ or side‐groups, respectively, is presented. Such polymers are important starting materials for elastomeric networks and postpolymerization modifications. The synthesis starts either with vinyl end‐functionalized polydimethylsiloxanes or with polymethylvinylsiloxanes. The vinyl groups are reacted either with thioacetic acid or with a thioacetic acid/butanethiol mixture via a UV‐initiated thiol‐ene reaction to form the respective thioester quantitatively within few minutes. The thioesters are subsequently deprotected to the respective thiols by reduction with LiAlH₄. The resulting thiol containing polysiloxanes can be used for the formation of networks or another functionalization. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2940–2948     

Hyperbranched polyphosphoesters with reactive end groups synthesized via acyclic diene metathesis polymerization and their transformation to crosslinked nanoparticles

A novel hyperbranched polyphosphoester (HBPPE) was prepared by acyclic diene metathesis (ADMET) polymerization of an AB₂ monomer using the second‐generation Hoveyda–Grubbs catalyst. IR analysis, gel permeation chromatography with multiangle laser light scattering, and NMR spectroscopy confirmed their controlled synthesis. The effect of the ADMET polymerization time in the thermal properties of HBPPEs was studied and their thermal degradation and flame‐retardant properties were evaluated. These reactive HBPPEs were used to synthesize polyphosphoesters nanoparticles by intramolecular crosslinking of the end acrylate groups in dilute solution. The successful preparation of this new type of polymer nanoparticles was proven by NMR spectroscopy and gel permeation chromatography. The morphologies of nanostructures were investigated via dynamic light scattering, atom force microscopy, and transmission electron microscopy. The results revealed that the crosslinked nanoparticles, which have a comparatively uniform size, were stable and reproducible in organic solvents. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 4331–4340     

Conjugated polymers with carbazole,fluorene, and ethylene dioxythiophene in the main chain and a pendant cyano group: Synthesis,photophysical, and electrochemical studies

Six new conjugated polymers comprising of carbazole, fluorene, and ethylene dioxythiophene (EDOT) moieties along the backbone with a pendant cyano group attached to the ethylene moiety have been designed and synthesized via Sonogashira coupling polymerization reaction. Optical and electrochemical characterizations have shown that the energy band gaps lie within the range of 2.35–2.44 eV. Additionally, the presence of carbazole and EDOT makes these polymers better hole transporting materials, which is reflected from their low oxidation potential peaks (0.55–1.11 V) in cyclic voltammograms. Furthermore, the aggregation enhanced emission (AEE) phenomenon resulted in a 2.6‐fold increase in fluorescence intensity in a 90:10 THF/water mixture in comparison to pristine THF. The AEE properties were further verified by DLS (dynamic light scattering) experiment and SEM (scanning electron microscopy) studies. Polymers in solution as well as in polystyrene matrix emit in the green region (quantum yield in solution state Φ_f =41–43%) with CIE values (0.25–0.36, 0.52–0.57). Excellent thermal stability is observed for the new polymers. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2774–2784     

Block copolymers via macromercaptan initiated ring opening polymerization

Poly(styrene) macromercaptanes (M_n = 1900, 3600, and 6100 g mol^?1, PDI ≈ 1.2) derived from thiocarbonyl thio capped polymers prepared via reversible addition fragmentation chain transfer polymerization were employed to initiate the ring opening polymerization (ROP) of D ,L ‐lactide under conditions of organo‐catalyis employing 4,4‐dimethylaminopyridine. Poly(styrene)‐block‐poly(lactide) polymers of number average molecular weights up to 25,000 g mol^?1 (PDI ≈ 1.2 to 1.6) were obtained and characterized via multiple detection size exclusion chromatography (SEC) using refractive index as well as UV detection. In addition, diffusion ordered nuclear magnetic resonance and liquid chromatography at critical conditions (of both polystyrene as well as poly(lactide) were employed to assess the copolymers' structure. Furthermore, it was demonstrated that polyethylenes capped with a thiol moiety can also be readily chain extended in a ROP employing D ,L ‐lactide, evidenced via NMR and high temperature SEC. This study indicates that the direct use of macromercaptantes is indeed a methodology to switch from a radical to a ROP process. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011