Cationic copolymerization of racemic‐β‐butyrolactone with L,L‐lactide: One‐pot synthesis of block copolymers

Cationic copolymerization of racemic‐β‐butyrolactone (β‐BL) with l,l ‐lactide (LA) initiated by alcohol and catalyzed by trifluoromethanesulfonic acid proceeding by activated monomer (AM) mechanism was investigated. Although both comonomers were present from the beginning in the reaction mixture, polymerization proceeded in sequential manner, with poly‐BL formed at the first stage acting as a macroinitiator for the subsequent polymerization of LA. Such course of copolymerization was confirmed by following the consumption of both comonomers throughout the process as well as by observing the changes of growing chain‐end structure using ¹H NMR. ¹³C NMR analysis and thermogravimetry revealed the block structure of resulting copolymers. The proposed mechanism of copolymerization was confirmed by the studies of changes of ¹H NMR chemical shift of acidic proton in the course of copolymerization, providing an indication that indeed protonated species and hydroxyl groups are present throughout the process, as required for AM mechanism. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4873–4884     

Ring opening polymerization and copolymerization of L‐lactide and ɛ‐caprolactone by bis‐ligated magnesium complexes

Seven magnesium complexes ( 1–7 ) were synthesized by reaction of new ( L ³ ‐H – L ⁵ ‐H ) and previously reported ketoimine pro‐ligands with dibutyl magnesium and were isolated in 59–70% yields. Complexes 1–7 were characterized fully and consisted of bis‐ligated homoleptic ketoiminates coordinated in distorted octahedral geometry around the magnesium centers. The complexes were investigated for their ability to initiate the ring opening polymerization (ROP) of l ‐lactide (L‐LA) to poly‐lactic acid (PLA) and ?‐caprolactone (?CL) to poly‐caprolactone in the presence of 4‐fluorophenol co‐catalyst. For L‐LA polymerization, complexes containing ligand electron‐donating groups ( 1–5 ) achieved >90% conversion in 2 h at 100 °C, while the presence of CF₃ groups in 6 and 7 slowed or resulted in no PLA detected. With ?CL, ROP initiated with 1–7 resulted in lower percentage conversion with similar electronic effects. Moderate molecular weight PLA polymeric material (14.3–21.3 kDa) with low polydispersity index values (1.23–1.56) was obtained, and ROP appeared to be living in nature. Copolymerization of L‐LA and ?CL yielded block copolymers only from the sequential polymerization of ?CL followed by L‐LA and not the reverse sequence of monomers or the simultaneous presence of both monomers. Polymers and copolymers were characterized with NMR, gel permeation chromatography, and differential scanning calorimetry. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 48–59     

Ring‐opening polymerization and block copolymerization of L‐lactide with divalent samarocene complex

Divalent samarocene complex [(C₅H₉C₅H₄)₂Sm(tetrahydrofuran)₂] was prepared and characterized and used to catalyze the ring‐opening polymerization of L ‐lactide (L‐LA) and copolymerization of L‐LA with caprolactone (CL). Several factors affecting monomer conversion and molecular weight of polymer, such as polymerization time, temperature, monomer/catalyst ratio, and solvent, were examined. The results indicated that polymerization was rapid, with monomer conversions reaching 100% within 1 h, and the conformation of L‐LA was retained. The structure of the block copolymer of CL/L‐LA was characterized by NMR and differential scanning calorimetry. The morphological changes during crystallization of poly(caprolactone) (PCL)‐b‐P(L‐LA) copolymer were monitored with real‐time hot‐stage atomic force microscopy (AFM). The effect of temperature on the morphological change and crystallization behavior of PCL‐b‐P(L‐LA) copolymer was demonstrated through AFM observation. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2667–2675, 2003     

Polymerization of (L,L)‐lactide and copolymerization with ϵ‐caprolactone initiated by dibutyltin dimethoxide in supercritical carbon dioxide

Ring‐opening polymerization (ROP) of (L,L)‐lactide (LA) has been initiated by dibutyltin dimethoxide in supercritical carbon dioxide (sc CO₂). Polymerization is controlled and proceeds at quasi the same rate as in toluene, which indicates that the reactivity of the propagating species is not impaired by parasitic carbonation reaction. Random copolymerization of LA with ?‐caprolactone (CL) has also been studied in sc CO₂, and the reactivity ratios have been determined as 5.8 ± 0.5 for LA and 0.7 ± 0.25 for CL. These values have to be compared to 0.7 ± 0.25 for LA and 0.15 ± 0.05 for CL in toluene. Good control on ROP of CL and LA in sc CO₂ has been confirmed by the successful synthesis of diblock copolymers by sequential polymerization of CL and LA. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2777‐2789, 2005     

Anionic alternating copolymerization of epoxide and six‐membered lactone bearing naphthyl moiety

This article describes the anionic copolymerization of glycidyl phenyl ether (GPE) and 1,2‐dihydro‐3H‐naphtho[2,1‐b]pyran‐3‐one (DHNP), a six‐membered aromatic lactone bearing naphthyl moiety. The copolymerization proceeded in a 1:1 alternating manner, to afford the corresponding polyester. The ester linkage in the main chain was cleavable by reduction with lithium aluminum hydride to give the corresponding diol that inherited the structure of the alternating sequence. The copolymerization ability of DHNP permitted its addition as a comonomer to an imidazole‐initiated polymerization of bisphenol A diglycidyl ether. The resulting networked polymer, of which main chain was endowed with the DHNP‐derived rigid naphthalene moieties, showed a higher glass transition temperature than that obtained similarly with using 3,4‐dihydrocoumarin (DHCM) as a comonomer, an analogous aromatic lactone bearing phenylene moiety instead of naphthalene moiety of DHNP. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Anionic alternating copolymerization of 3,4‐dihydrocoumarin and glycidyl ethers: A new approach to polyester synthesis

Anionic copolymerizations of 3,4‐dihydrocoumarin (DHCM) and a series of glycidyl ethers (n‐butyl glycidyl ether, tert‐butyl glycidyl ether, and allyl glycidyl ether) with 2‐ethyl‐4‐methylimidazole as an initiator proceeded in a 1:1 alternating manner to give the corresponding polyesters, whose structures were confirmed by spectroscopic analyses and reductive scission of the ester bonds in the main chain with lithium aluminum hydride, followed by detailed analyses of the resulting fragments. The polyester obtained by the copolymerization of DHCM and allyl glycidyl ether inherited the allyl groups in the side chain, whose applicability to chemical modifications of the polyester was successfully demonstrated by a platinum‐catalyzed hydrosilylation reaction. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4092–4102, 2008     

Precision synthesis of microstructures in star‐shaped copolymers of ϵ‐caprolactone,L‐lactide,and 1,5‐dioxepan‐2‐one

Star‐shaped homo‐ and copolymers were synthesized in a controlled fashion using two different initiating systems. Homopolymers of ε‐caprolactone, L ‐lactide, and 1,5‐dioxepan‐2‐one were firstly polymerized using (I) a spirocyclic tin initiator and (II) stannous octoate (cocatalyst) together with pentaerythritol ethoxylate 15/4 EO/OH (coinitiator), to give polymers with identical core moieties. Our gained understanding of the versatile and controllable initiator systems kinetics, the transesterification reactions occurring, and the role which the reaction conditions play on the material outcome, made it possible to tailor the copolymer microstructure. Two strategies were used to successfully synthesize copolymers of different microstructures with the two initiator systems, i.e., a more multiblock‐ or a block‐structure. The correct choice of the monomer addition order enabled two distinct blocks to be created for the copolymers of poly(DXO‐co‐LLA) and poly(CL‐co‐LLA). In the case of poly(CL‐co‐DXO), multiblock copolymers were created using both systems whereas longer blocks were created with the spirocyclic tin initiator. © 2008 Wiley Periodicals, Inc. JPolym Sci Part A: Polym Chem 46: 1249–1264, 2008     

Synthesis of block and end‐functionalized polyesters by triflimide‐catalyzed ring‐opening polymerization of ε‐caprolactone, 1,5‐dioxepan‐2‐one,and rac‐lactide

The ring‐opening polymerization (ROP) of cyclic esters, such as ε‐caprolactone, 1,5‐dioxepan‐2‐one, and racemic lactide using the combination of 3‐phenyl‐1‐propanol as the initiator and triflimide (HNTf₂) as the catalyst at room temperature with the [monomer]₀/[initiator]₀ ratio of 50/1 was investigated. The polymerizations homogeneously proceeded to afford poly(ε‐caprolactone) (PCL), poly(1,5‐dioxepan‐2‐one) (PDXO), and polylactide (PLA) with controlled molecular weights and narrow polydispersity indices. The molecular weight determined from an ¹H NMR analysis (PCL, M_n,NMR = 5380; PDXO, M_n,NMR = 5820; PLA, M_n,NMR = 6490) showed good agreement with the calculated values. The ¹H NMR and matrix‐assisted laser desorption ionization time‐of‐flight mass spectrometry analyses strongly indicated that the obtained compounds were the desired polyesters. The kinetic measurements confirmed the controlled/living nature for the HNTf₂‐catalyzed ROP of cyclic esters. A series of functional alcohols, such as propargyl alcohol, 6‐azido‐1‐hexanol, N‐(2‐hydroxyethyl)maleimide, 5‐hexen‐1‐ol, and 2‐hydroxyethyl methacrylate, successfully produced end‐functionalized polyesters. In addition, poly(ethylene glycol)‐block‐polyester, poly(δ‐valerolactone)‐block‐poly(ε‐caprolactone), and poly(ε‐caprolactone)‐block‐polylactide were synthesized using the HNTf₂‐catalyzed ROP. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2455–2463     

Stereoselective ring‐opening polymerization of rac‐lactide with a single‐site,racemic aluminum alkoxide catalyst: Synthesis of stereoblock poly(lactic acid)

The polymerization of racemic lactide with a racemic aluminum alkoxide catalyst is reported. Microstructural analysis of the polymer produced with ¹H NMR spectroscopy revealed that an isotactic stereoblock poly(lactic acid) formed, where each enantiomerically pure block contained an average of 11 lactide monomer units. The melting point of this polymer, 179 °C, was higher than that of the enantiomerically pure polymer, consistent with the cocrystallization of the enantiomeric blocks of the polymer. The mechanism of the polymer formation is currently unknown, although a polymer exchange pathway, where living chain ends switch between metal centers to produce diastereomeric active species, is proposed. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4686–4692, 2000     

Polyester oligodiols by cationic AM copolymerization of L,L‐lactide and ε‐caprolactone initiated by diols

Cationic copolymerization of L,L ‐lactide (LA) and ε‐caprolactone (CL) initiated by low molecular weight diols in the presence of acid catalyst gives corresponding copolyesters terminated at both ends with hydroxyl groups in practically quantitative yield. Copolymerization proceeds by Activated Monomer mechanism. LA is consumed preferentially and at the later stages of copolymerization the reaction mixture is enriched with CL. In spite of that, random distribution of both units is observed and end‐groups are mainly ? LA‐OH groups and not ? CL‐OH groups. This is explained by the fact that to reach high conversion of both comonomers the relatively long reaction times are required and at those conditions transesterification reaction becomes significant. Thus the microstructure of copolymers and the nature of the end‐groups is governed by transesterification rather then by the kinetics of comonomers incorporation. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3090–3097, 2007     

Ring‐opening polymerization of rac‐ and meso‐lactide initiated by indium bis(phenolate) isopropoxy complexes

Ring‐opening polymerization of rac‐ and meso‐lactide initiated by indium bis(phenolate) isopropoxides {1,4‐dithiabutanediylbis(4,6‐di‐tert‐butylphenolate)}(isopropoxy)indium ( 1 ) and {1,4‐dithiabutanediylbis(4,6‐di(2‐phenyl‐2‐propyl)phenolate)}(isopropoxy)indium ( 2 ) is found to follow first‐order kinetics for monomer conversion. Activation parameters ΔH^? and ΔS^? suggest an ordered transition state. Initiators 1 and 2 polymerize meso‐lactide faster than rac‐lactide. In general, compound 2 with the more bulky cumyl ortho‐substituents in the phenolate moiety shows higher polymerization activity than 1 with tert‐butyl substituents. meso‐Lactide is polymerized to syndiotactic poly(meso‐lactides) in THF, while polymerization of rac‐lactide in THF gives atactic poly(rac‐lactides) with solvent‐dependent preferences for heterotactic (THF) or isotactic (CH₂Cl₂) sequences. Indium bis(phenolate) compound rac‐(1,2‐cyclohexanedithio‐2,2′‐bis{4,6‐di(2‐phenyl‐2‐propyl)phenolato}(isopropoxy)indium ( 3 ) polymerizes meso‐lactide to give syndiotactic poly(meso‐lactide) with narrow molecular weight distributions and rac‐lactide in THF to give heterotactically enriched poly(rac‐lactides). © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4983–4991     

Anionic alternating copolymerization of a bifunctional six‐membered lactone and glycidyl phenyl ether: Selective synthesis of a linear polyester having lactone moiety

An imidazole‐initiated copolymerization of an aromatic bislactone, 10‐methyl‐2H,8H‐benzo[1,2‐b:5,4‐b′]bipyran‐2,8‐dione ( 1 ), and glycidyl phenyl ether (GPE) was investigated. In spite of the bifunctional nature of 1 that would potentially permit formation of networked and thus insoluble polymers upon its copolymerization, only one of the two lactone moieties of 1 exclusively underwent the copolymerization to give a linear polyester. Spectroscopic analysis of the polyester and its reductive scission into the corresponding fragment revealed that the polyester was formed by a 1:1 alternating copolymerization of GPE and the lactone moiety of 1 . The other lactone in 1 that did not participate in the copolymerization was quantitatively incorporated into the side chain of the polyester as a reactive site, of which ring‐opening reactions by amine and alcohol as nucleophilic reagents allowed chemoselective polymer reactions. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1661–1672, 2009     

Ring‐opening polymerization of 6‐hydroxynon‐8‐enoic acid lactone: Novel biodegradable copolymers containing allyl pendent groups

This article reports the synthesis and copolymerization of 6‐hydroxynon‐8‐enoic acid lactone. The ring‐opening polymerization of this lactone‐type monomer bearing a pendant allyl group led to new homopolymers and random copolymers with ε‐caprolactone and L ,L ‐lactide. The copolymerizations were carried out at 110 °C with Sn(Oct)₂ as a catalyst. The introduction of unsaturations into the aliphatic polyester permitted us to carry out different chemical transformations on this family of polymers. For example, this article reports the bromination, epoxidation, and hydrosylilation of the allyl group in the new polyester copolymers. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 870–875, 2000     

Synthesis and characterization of amphiphilic block copolymers with allyl side‐groups

The synthesis of a new cyclic carbonate monomer containing an allyl group was reported and its biodegradable amphiphilic block copolymer, poly(ethylene glycol)‐block‐poly(L ‐lactide‐co‐5‐methyl‐5‐allyloxycarbonyl‐propylene carbonate) [PEG‐b‐P(LA‐co‐MAC)] was synthesized by ring‐opening polymerization (ROP) of L ‐lactide (LA) and 5‐methyl‐5‐allyloxycarbonyl‐1,3‐dioxan‐2‐one (MAC) in the presence of poly (ethylene glycol) as a macroinitiator, with diethyl zinc as a catalyst. ¹³C NMR and ¹H NMR were used for microstructure identification of the copolymers. The copolymer could form micelles in aqueous solution. The core of the micelles is built of the hydrophobic P(LA‐co‐MAC) chains, whereas the shell is set up by the hydrophilic PEG blocks. The micelles exhibited a homogeneous spherical morphology and unimodal size distribution. By using the cyclic carbonate monomer containing allyl side‐groups, crosslinking of the PEG‐b‐P(LA‐co‐MAC) inner core was possible. The adhesion and spreading of ECV‐304 cells on the copolymer were better than that on PLA films. Therefore, this biodegradable amphiphilic block copolymer is expected to be used as a biomaterial for drug delivery and tissue engineering. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5518–5528, 2007     

Controlled synthesis of trifluoropropylmethylsiloxane–dimethylsiloxane gradient copolymers by anionic ROP of cyclotrisiloxanes

Kinetics of the anionic ring opening copolymerization of 2,4,6‐tris(3,3,3‐trifluoropropyl)‐2,4,6‐trimethylcyclotrisiloxane (F₃) with hexamethylcyclotrisiloxane (D₃) was studied in THF using BuLi as the initiator. The apparent reactivity ratios were estimated by computer simulation to r = 0.10 ± 0.02, r = 51.8 ± 5.5, which were used to predict the copolymer composition. As a result of so much different reactivities, simultaneous copolymerization leads to copolymers of blocky structure containing a narrow intermediate fragment with gradient distribution of siloxane units. Polymers having more uniform distribution of the trifluoropropyl groups along the chain were obtained by the semibatch process, adding F₃ to the polymerization of less reactive D₃. The resulted copolymers were characterized by SEC chromatography, ²⁹Si NMR, DSC, DMA, and SAXS. Thermal and mechanical properties of the copolymers obtained by simultaneous copolymerization were similar to those of block copolymers. Only the copolymers obtained by semibatch method showed properties typical for gradient copolymers. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1204–1216, 2009     

Cationic polymerization of L,L‐lactide

Cationic bulk polymerization of L ,L‐ lactide (LA) initiated by trifluromethanesulfonic acid [triflic acid (TfA)] has been studied. At temperatures 120–160 °C, polymerization proceeded to high conversion (>90% within ～8 h) giving polymers with M_n ～ 2 × 10⁴ and relatively high dispersity. Thermogravimetric analysis of resulting polylactide (PLA) indicated that its thermal stability was considerably higher than the thermal stability of linear PLA of comparable molecular weight obtained with ROH/Sn(Oct)₂ initiating system. Also hydrolytic stability of cationically prepared PLA was significantly higher than hydrolytic stability of linear PLA. Because thermal or hydrolytic degradation of PLA starting from end‐groups is considerably faster than random chain scission, both thermal and hydrolytic stability depend on molecular weight of the polymer. High thermal and hydrolytic stability, in spite of moderate molecular weight of cationically prepared PLA, indicate that the fraction of end‐groups is considerably lower than in linear PLA of comparable molecular weight. According to proposed mechanism of cationic LA polymerization growing macromolecules are fitted with terminal ? OH and ? C(O)OSO₂CF₃ end‐groups. The presence of those groups allows efficient end‐to‐end cyclization. Cyclic nature of resulting PLA explains its higher thermal and hydrolytic stability as compared with linear PLA. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2650–2658, 2010     

Synthesis and properties of high‐molecular‐weight stereo di‐block polylactides with nonequivalent D/L ratios

Di‐stereoblock polylactides (di‐sb‐PLA: PLLA‐b‐PDLA) having high molecular weight (M_n > 100 kDa) were successfully synthesized by two‐step ring‐opening polymerization (ROP) of L ‐ and D ‐lactides using tin(2‐ethylhexanoate) as a catalyst. By optimizing the polymerization conditions, the block sequences were well regulated at non‐equivalent feed ratios of PLLA and PDLA. This synthetic method consisted of three stages: (1) polymerization of either L ‐ or D ‐lactide to obtain a PLLA or PDLA prepolymer with a molecular weight less than 50 kDa, (2) purification of the obtained prepolymer to remove residual lactide, and (3) polymerization of the enantiomeric lactide in the presence of the purified prepolymer. Their ¹³C and ³¹P NMR spectra of the resultant di‐sb‐PLAs strongly supported their di‐stereo block structure. These di‐sb‐PLAs, having weight‐average molecular weights higher than 150 kDa, were fabricated into polymer films by solution casting and showed exclusive stereocomplexation. The thermomechanical analysis of the films revealed that their heat deformation temperature was limited probably because of their low crystallinity owing to the non‐equivalent PLLA/PDLA ratio. The blend systems of the di‐sb‐PLAs having complementary stereo‐sequences (the one with a long PLLA block and the other with long PDLA block) were also prepared and characterized to enhance the sc crystallinity. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 794–801, 2010     

Cationic copolymerization behavior of epoxide and 3‐isochromanone

Cationic copolymerization of n‐butyl glycidyl ether (BGE) and 3‐isochromanone (ICM) was investigated using trifluoromethanesulfonic acid (TfOH) as an initiator at 100 °C. In the copolymerization, the reactive site of ICM with the propagating cation was completely different from that in its homopolymerization: in the former, the propagating cation reacted with the carbonyl oxygen of ICM, while in the latter, the propagating cation reacted with the aromatic ring of ICM. In spite of the potential of ICM to undergo the homopolymerization, in the present copolymerization, ICM was consumed smoothly only in the presence of epoxide. As a result, the copolymerization proceeded in a statistic manner to afford the corresponding copolymer bearing ICM‐derived ester linkages distributed in the main chain. Cationic copolymerization of bisphenol A‐diglycidyl ether and ICM was also performed to synthesize the corresponding networked polymer. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4213–4220