三烷基季铵盐阳离子表面活性剂的合成与性能测定

用柠檬酸、十二烷基二甲基叔胺与环氧氯丙烷反应合成了柠檬酸三酯三烷基季铵盐阳离子表面活性剂。实验结果表明,在异丙醇溶剂中,反应体系在80℃,反应时间12h,产物的收率为91.5%。用红外光谱、元素分析、高效液相色谱对其结构进行了表征,通过测定其临界胶束浓度、Krafft点及泡沫性能,对产物表面活性进行了分析。     

Structure transfer from a polymeric melt to the solid state. Part I: The influence of chain entanglements in linear polyethylene

Melt-spinning experiments were carried out at high quenching rates. Mechanical properties (elongation at break, natural draw ratio, and elastic recovery) have been measured. Significant variations of these quantities were observed when extrusion conditions were changed. This has been attributed to different states of the entanglements within the melt, which are directly transferred into the solid state. This intercorrelation between melt and solid-state properties has been substantiated in the case of rapidly cooled samples, where a poor crystallization on one side and a simultaneous good conservation of melt history on the other side are provoked.     

Characteristics of proflavine solubilized in complexes of anionic polymers with a cationic surfactant

Absorption and emission spectra of 3,6-diaminoacridine (proflavine) are reported in mixed solutions of dodecyltrimethylammonium bromide (DTAB) with various polyelectrolytes including the sodium salts of poly(acrylic acid) (PAA). poly(methacrylic acid) (PMA), poly(styrenesulfonic acid) (PSS), poly(garacturonic acid) (pectate), and the alternating copolymers of maleic acid with ethylene (PMA-E) and styrene (PMA-S). The spectral change indicates the association of the dye (blue-shift) on these polyions except on PSS, the easy dissociation of the aggregated form into the monomeric form and the solubilization into the hydrophobic PMA-S/DTAB complex (red-shift), the little dissociation in the PAA/DTAB, PMA/DTAB and PMA-E/DTAB complexes, and the liberation of the bound dye in the case of pectate/DTAB complexes. In the PSS system, the strong interaction of the dye with the styrene groups induces the completely different spectral behavior. These results are discussed with the cooperative binding of the dye and the surfactant ion.     

Electrophoretic properties of complexes between DNA and the cationic surfactant cetyltrimethylammonium bromide

We use agarose gel electrophoresis to characterize how the monovalent catioinic surfactant cetyltrimethylammonium bromide (CTAB) compacts double-stranded DNA, which is detected as a reduction in electrophoretic DNA velocity. The velocity reaches a plateau at a ratio R = 1.8 of CTAB to DNA-phosphate charges, i.e., above the neutralization point, and the complexes retain a net negative charge at least up to R = 200. Condensation experiments on a mixture of two DNA sizes show that the complexes formed contain only one condensed DNA molecule each. These CTAB-DNA globules were further characterized by time-resolved measurements of their velocity inside the gel, which showed that CTAB does not dissociate during the migration but possibly upon entry into the gel. Using the Ogston-model for electrophoresis of spherical particles, the measured in-gel velocity of the globule is quantitatively consistent with CTAB having two opposite effects, reduction of both the electrophoretic charge and DNA coil size. In the case of CTAB the two effects nearly cancel, which can explain why opposite velocity shifts (globule faster than uncomplexed DNA) have been observed with some catioinic condensation agents. Dissociation of the complexes by addition of anionic surfactants was also studied. The DNA release from the globule was complete at a mixing ratio between anionic and cationic surfactants equal to 1, in agreement with equilibrium studies. Circular DNA retained its supercoiling, and this demonstrates a lack of DNA nicking in the compaction-release cycle which is important in DNA transfection and purification applications.     

Surface complexation of DNA with a cationic surfactant

We have studied the surface complexation of DNA with a cationic surfactant (DTAB) using a combination of methods: dynamic surface tension, ellipsometry and Brewster angle microscopy. Below the surfactant critical aggregation concentration (cac), complexation occurs only at the surface, and the results are consistent with neutralization of the surfactant charges by the free polymer ions. Above the cac, surfactant starts to bind cooperatively to DNA in the bulk, and adsorption of the preformed hydrophobic surfactant DNA aggregate is now possible, leading to thick surface layers. At still higher concentrations of surfactant (still below saturation of binding in the bulk), there is decrease in adsorption due to competition with bulk aggregates. Finally, as surfactant concentration is increased still further, bulk aggregates become less soluble and large amounts are adsorbed, forming a surface layer, which is solid-like and brittle.     

阳离子表面活性剂体系中纳米TiO2的合成及表征

在阳离子表面活性剂双十八烷基二甲基氯化铵(D1821)的水溶液中,以钛酸四丁酯为钛源,在室温下合成了具有日光催化性能的纳米TiO2,考察了合成条件(反应温度、pH值、焙烧温度)对产物结构的影响。通过x射线衍射、透射电镜对所合成的样品进行表征,并对非离子表面活性剂壬基酚聚氧乙烯醚(NPE-10)进行了光催化降解性能研究。结果表明:反应温度为20℃,pH=7,焙烧温度为500℃时所合成的样品颗粒分散均匀,晶型完整,而且形成了锐钛矿和金红石的混晶结构。日光照射下,这种纳米TiO2对NPE-10表现出了较好的光催化性能,3h的降解率达到了80%。     

含多酯基不对称阳离子Gemini表面活性剂的合成及性能

报道了一种含多酯基不对称阳离子Gem in i表面活性剂(Ⅰ)的合成。在甲醇钠催化下,N,N-二甲基乙醇胺与邻苯二甲酸二甲酯酯交换制得二(N,N-二甲基氨基乙基)邻苯二甲酸酯(Ⅱ),收率92%(以邻苯二甲酸二甲酯计);氯乙酸分别与十二醇、十六醇反应合成氯乙酸十二醇酯(Ⅲ)和十六醇酯(Ⅳ),产率分别为93%(以十二醇计)、91%(以十六醇计);(Ⅱ)与(Ⅲ)反应,经石油醚洗涤除去杂质后,再与(Ⅳ)季铵盐化,经乙腈重结晶,得白色晶体(I),采用两相滴定法测定其质量分数为99.5%,收率59%(以氯乙酸十二醇酯计)。用IR1、HNMR、元素分析表征了其结构,测定了其CMC和γCMC,研究了其乳化性和泡沫性质。     

Vesicle formation of 1:1 cationic and anionic surfactant mixtures in nonaqueous polar solvents

The vesicle formations of 1:1 cationic-anionic surfactants in various nonaqueous polar solvents and their aqueous mixtures were investigated. Outstanding vesicle-forming capability and stability of cationic and anionic surfactants were found in nonaqueous polar solvents and their aqueous mixtures except for in formamide. A small amount of formamide destroys the vesicles formed by cationic-anionic surfactants in aqueous solutions. These results could be very well explained based on the effect of the medium dielectric constant. Received: 26 May 1998 Accepted in revised form: 24 November 1998     

Effect of aging time and salt on the viscosity behaviour of a Gemini cationic surfactant

Rheological properties of micellar solutions of a cationic Gemini surfactant, 2-hydroxypropyl-1,3-bis (dodecyldimethylammonium chloride), are studied as a function of aging time and salt addition. The results show that the self-aggregating behaviour in solution changes as a factor of time, probably due to intermolecular hydrogen bonds. The viscosity of the solution undergoes a series of visible changes so that the solution changes from a flow state to highly viscoelastic state, and finally, to a transparent solid, with a corresponding 4–6-fold increase in zero shear state viscosity. Rheology and freeze fracture transmission electron microscopy (FF-TEM) measurements show rod-like micelles at the beginning, which then change to wormlike micelles, and eventually to a quasi-gel-like network. Addition of an inorganic salt (NaCl) induces salting out, while the addition of an organic salt (NaSal) promotes micellar growth. At a fixed NaSal-to-surfactant molar ratio of 3:5, all solutions show Maxwell fluid behaviour and maximum zero-shear-rate viscosity; these trends can be attributed to the formation of a network structure between the cationic ions of the surfactant and Sal^– as the surfactant concentration increases. Crystal analysis further confirms the presence of structures linked by intermolecular hydrogen bonds.     

Semicontinuous seeded cationic emulsion polymerization of styrene: The effects of the concentration and type of cationic surfactant

The objective of this work was to analyze the effects of the concentration and type of cationic surfactant on the kinetic features (instantaneous and overall conversions) and colloidal characteristics [mean particle diameter, particle size distribution (PSD), and surface charge density] in the semicontinuous seeded cationic emulsion polymerization of styrene. 2,2′‐Azobis(N,N′‐dimethyleneisobutyramidine)dihydrochloride was used as an initiator. The surfactants were dodecyltrimethylammonium bromide (DTAB) and hexadecyltrimethylammonium bromide (HDTAB). So that the evolution of some polymeric and colloidal characteristics of the synthesized latices could be followed, the overall and instantaneous conversions were defined and determined gravimetrically. The PSDs and average particle diameters were determined by transmission electron microscopy and photon correlation spectroscopy. The surface charge density was determined by conductimetric titration. The evolution of the instantaneous conversions, the total number of particles, and the PSDs of the different reactions were related to the nucleation, growth, and coagulation processes taking place in the semicontinuous seeded emulsion polymerizations. The PSDs obtained from the reactions carried out with the emulsifier DTAB, at a concentration equal to its critical micelle concentration (cmc) and at a concentration twice its cmc, presented more and smaller particles than those obtained by the addition of HDTAB to the polymerization recipe. At lower emulsifier concentrations equal to half of the cmc, the system had lower colloidal stability with DTAB. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2322–2334, 2003     

Electrostatic interaction between a charge-regulated particle and a solid surface in electrolyte solution: effect of cationic electrolytes

The effect of cations on the electrostatic interaction between a negative charge-regulated particle and a solid surface of constant negative potential in electrolyte solution is analyzed. Here, we assume that the rate of approach of a particle to a solid surface is faster than that of the dissociation of the ionogenic groups on the surface of particle. In other words, the effect of the time-dependent dissociation of ionogenic groups on the surface of a particle is taken into account. The result of the present study reveals that, although the solid surface is negatively charged, the presence of cations in the suspension medium has a negative effect on the rate of adhesion. The qualitative behaviors in the variation of the interaction force between a particle and a solid surface as a function of separation distance between them predicted by a kinetic model and the corresponding equilibrium model and constant charge density model are entirely different. The rate of approach of a particle to a solid surface is on the order (constant charge density model)>(kinetic model)>(equilibrium model).     

The crystalline molecular complex between cationic surfactant and some additive substances: Part I: complex formation with phenol derivative as additives

It was established that many crystalline molecular complexes composed of cationic surfactants such as CTAB and several phenolic derivatives were obtained from an appropriate concentrated solution system in which a remarkable viscoelasticity was developed. It is revealed that the molecular complexes have an unambiguous composition of 1:1 molar ratio of surfactants to phenolic additives. The molecular complexes also showed characteristic endothermicity of a degree that suggests the specimens to be single and a pure species. However, through repeated runs the thermal stability of the complexes seemed to be rather poor, as exhibited by a profile change in thermograms of DSC.     

Effect of imidazolium-based ionic liquids on the aggregation behavior of twin-tailed cationic gemini surfactant in aqueous solution

Micellization behavior of the twin-tailed surfactants can be modulated by the addition of various modifiers. Ionic liquids (ILs) are one of them and are documented here. The beauty of these environmentally benign neoteric molecules lies in their structural versatility. Here, we have investigated the effect of three ILs: 1-butyl-3-methylimidazolium bromide ([C₄mim][Br]), 1-hexyl-3-methylimidazolium bromide ([C₆mim][Br]), and 1-octyl-3-methylimidazolium bromide ([C₈mim][Br]) on the aggregation and surface adsorption behavior of cationic gemini surfactant, bis(hexadecyldimethyl ammonium)propane dibromide (16-3-16) through experimentally measured electrical conductivities, surface tensions, and by spectral methods (UV-vis absorbance and fluorescence measurements). The main focus of the study is to observe the effect of added ILs on the critical micelle concentration (cmc), various surface parameters, aggregation number, and size of the aggregates of gemini surfactant. The results show that the more hydrophobic ILs, that is, [C₆mim][Br] and [C₈mim][Br] behave as electrolyte at lower concentration and cosurfactant at higher concentration, whereas moderately hydrophobic IL [C₄mim][Br] acts as an electrolyte at all concentration ranges studied. The modulating effects of ILs were also compared with conventional electrolyte (NaBr) at similar conditions.     

Spectrophotometric determination of Fe(III) with tiron in the presence of cationic surfactant and its application for the determination of iron in Al-alloys and Cu-based alloys

A sensitive Spectrophotometric method for the determination of iron with tiron and a cationic surfactant, cetylpyridinium chloride, at pH 5.6 is reported. The complex is extracted into a chloroform-propan-2-ol (41) mixture and shows maximum absorbance at 520 nm. Beer's law is obeyed in the range 1–14 g/ml with an average molar absorptivity of 15800 l mol^–1 cm^–1. The molar ratio as determined by Job's method for Fe:tiron:CPC is 143. Interferences by various ions are examined. Zr, Ti and Mo interfere heavily. The method is applied for the determination of iron in Al-based and Cu-based alloys, using appropriate masking agents.     

A low molecular weight gel formed by cationic surfactant 1-dodecylpyridinium bromide in acetone/water: its characterisation and implication for enzyme immobilisation

A novel cationic surfactant-based gelling system is presented in this report. The cationic surfactant 1-dodecylpyridinium bromide (DPB) in the mixture of acetone and water can form gels without additive. The gel structure and the gelation mechanism were studied using techniques of rheology, microscopy, FT-IR and ¹H NMR spectroscopy. The present results indicate that the DPBs in acetone/water driven by hydrogen bonding, van der Waals force and other non-covalent interactions can self-assemble into rod-like fibers, and the fibers intertwined into a three-dimensional network. Laccase and horseradish peroxidase entrapped in the gel are biologically and/or electrochemically active. In addition, the present gel does not swell in the hydrophobic ionic liquid [Bmim]PF₆, showing its great promise in green biocatalysis and biotransformation.     

Exploring the structural,mechanical and thermodynamic properties of Ti-V solid solutions

Although Ti-V based high-temperature alloys are used in aerospace engine, rocket engine and hot sections, the structure and mechanical properties of Ti-V alloys remains controversy. To explore the correlation between structural and mechanical properties, we apply employed the DFT method to study the phases stability, mechanical and thermodynamic properties of Ti-V solid solution. Two Ti-V solid solutions: Ti(V)_ss solid solution and V(Ti)_ss solid solution are discussed. Two Ti-V solid solutions are thermodynamic stability. In particular, the Ti-V solid solution prefers to form V(Ti)_ss solid solution, in while the V(Ti)_ss solid solution remains cubic structure. Furthermore, the Ti(V)_ss solid solution is a mechanical instability. However, the V(Ti)_ss solid solution is a mechanical stability. Here, the bulk modulus, shear modulus and Young's modulus of V(Ti)_ss solid solution are 136.9, 23.5 and 66.7 GPa. In particular, the bulk modulus of V(Ti)_ss solid solution is higher than the bulk modulus of the pure Ti. In addition, the V(Ti)_ss solid solution shows better ductility compared to the pure Ti and V. Naturally, the stability and mechanical properties of V(Ti) solid solution is related to the Ti-V metallic bond because of the localized hybridization between the Ti(3d) and V(3d).     

Rheological and thermo-responsive characteristics of the mixed aqueous solution of gemini cationic surfactant and hydroxyl naphthalene carboxylic acid sodium

The new thermo-switchable wormlike micellar systems were developed by mixing the gemini cationic surfactant, 2-hydroxypropyl-1,3-bis (dimethylmyristylammonium chloride) (14-3(OH)-14(2Cl) and sodium 1-hydroxynaphthalene-2-carboxylate (1SHNC) and sodium 2-hydroxynaphthalene- 3-carboxylate (2SHNC) in a certain concentration range. Their viscoelastic and thermos-responsive behaviors as a function of the salts concentration or temperature were investigated via rheological and cryo-TEM investigations. The results demonstrated that the zero-shear viscosity (η₀) significantly increased while raising salt concentrations above a threshold concentration (C_S*) until reaching maximum and then decreased. For the mixed solutions before the maximum, the zero-shear viscosity linearly decreased with increasing temperature and conformed to the Arrhenius law. However, for those mixed systems displaying thermo-responsive characteristic after the summit, the curve of η₀ as a function of temperature exhibited a maximum over the whole temperature range, namely, the systems showed thermo-thickening and thermo-thinning behaviors at low and high temperatures. The abovementioned phenomena were explained by the formation of hydrogen bond in 14-3(OH)-14(2Cl) molecules and the different solubility of SHNC under different temperatures, and the transition mechanisms of the aggregates were analyzed accordingly.     

表面活性剂中DNA构象变化的研究

以荧光探针法研究了表面活性剂与小牛胸腺DNA的相互作用，结果表明：阳离子表面活性剂主要通过静电引力和疏水方式与DNA作用；阴离子表面活性剂与DNA之间存在静电排斥力，两者之间的相互作用不太明显；而非离子表面活性剂与DNA的相互作用类似于有机溶剂对DNA的影响，即通过溶液的极性、粘度和介电常数来影响DNA的构象，表面活性剂使得DNA构象发生较大的变化，预示了它可能使DNA的生物功能发生较大的变化。     

Investigation of the interactions in emulsions stabilized by a polymeric surfactant and its mixtures with an anionic surfactant

 The interaction of a nonionic polymeric surfactant with an anionic surfactant at the oil–water interface has been studied by its effects on the droplet size, stability and rheology of emulsions. Oil-in-water (o/w) emulsions were prepared using isoparaffinic oil and mixtures of a nonionic polymeric surfactant with an anionic surfactant. The macro-molecular surfactant was a graft copolymer with a backbone of polymethyl methacrylate and grafted polyethylene oxide (a graft copolymer with PEO chains of MW=750). The anionic surfactant was sodium dodecyl sulfate (SDS). The stabiliza-tion of the emulsion droplets was found to be different when using one or the other surfactant. The mechanism of stabilization of emulsion droplets by the macro-molecular surfactant is of the steric type while the stabilization by anionic surfactant is of the electrostatic repulsion type. Emulsions stabilized with mixtures present both types of stabilization. Other effects on the preparation and stabilization of emulsions were found to be dependent on properties associated with the surfactant molecular weight such as the Marangoni effect and Gibbs elasticity. The initial droplet size of the emulsions showed a synergistic effect of the surfactant combination, showing a minimum for the mixtures compared to the pure components. Emulsion stability also shows a synergistic interaction of both surfactants. Rheological measurements allow for the estimation of the interparticle interaction when measured as a function of volume fraction. Most of the effects observed can be attributed to the differences in interfacial tension and droplet radius produced by both surfactants and their mixtures. The elastic moduli are well explained on the basis of droplet deformation. Ionic versus steric stabilization produce little difference in the observed rheology, the only important differences observed concerned the extent of the linear viscoelasticity region. Received: 22 November 1996 Accepted: 24 March 1997     

Synthesis and catalytic properties of hierarchical TS-1 in the presence of cationic organosilane surfactant

Hierarchical TS-1 has been synthesized in the presence of cationic organosilane surfactant.The material is characterized with XRD,TEM,N₂ adsorption isotherm.The results show that the hierarchical TS-1 aggregates consist of small primary units with sizes of 20-30 nm.The BET surface area increases from 420 to 513 m²/g compared to conventional TS-1 zeolite.The sample is shown to be more active in epoxidation of cyclohexene than conventional TS-1.