Anion Responsive Imidazolium‐Based Polymers

Stimuli responsiveness in polymer design is providing basis for diversely new and advanced materials that exhibit switchable porosity in membranes and coatings, switchable particle formation and thermodynamically stable nanoparticle dispersions, polymers that provide directed mechanical stress in response to intensive fields, and switchable compatibility of nanomaterials in changing environments. The incorporation of ionic liquid monomers has resulted in many new polymers based on the imidazolium group. These polymers exhibit all of the above‐articulated material properties. Some insight into how these anion responsive polymers function has become empirically available. Much opportunity remains for extending our understanding as well as for designing more refined stimuli‐responsive materials.     

A reduction sensitive cascade biodegradable linear polymer

Cascade degradable linear polymers offer the potential for a high degree of control over the degradation process. They comprise a backbone that is stable in the presence of an end cap, but upon removal of the end cap a cascade of intramolecular reactions is initiated that leads of depolymerization of the polymer backbone. Reported here is a new polymer backbone based on N,N′‐dimethylethylenediamine and 2‐mercaptoethanol linked by carbamates and thiocarbamates. A disulfide end cap was incorporated such that its cleavage under reducing conditions revealed the thiol of 2‐mercaptoethanol, leading to alternating cyclizations of the 2‐mercaptoethanol and N,N′‐dimethylethylenediamine moieties to provide 1,3‐oxathiolan‐2‐one and N,N′‐dimethylimidazolidinone, respectively. The degradation was monitored by ¹H NMR and GPC. The expected products were observed, along with a portion of nondegradable polymer that was likely cyclic species. Overall, the results demonstrate the promise of this new class of polymers to degrade selectively in reducing environments such as hypoxic tumor tissue or the intracellular compartments of cells. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3977–3985, 2010     

Stimuli‐responsive polymers in the 21st century: Elaborated architecture to achieve high sensitivity,fast response,and robust behavior

Life is polymeric in its essence. The living cell contains a range of biopolymers such as proteins, carbohydrates, and nucleic acids. The cells are often compartmentalized via membranes that are composed of lipids. These are small molecules, but they spontaneously aggregate into supermolecular structures. The building blocks of these lipids are among others fatty acids, structures built from methylene oligomers. Biopolymers are sensitive to external stimuli. There are examples where the molecules show a highly non‐linear response to external stimuli. This is seen as moderate changes in structural properties in response to changes in an external parameter until a critical point is reached where a dramatic change in molecular properties takes place upon an incremental change in the external conditions. After the transition, the system responds poorly to further changes. Such non‐linear responses contribute to dramatic cooperative conformational changes leading to strong effects in the biological system. The strong response is an integrated effect of many weak interactions, and it is the cooperativity between all these interactions that are the driving forces for processes occurring in such systems. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Energy transfer from fluorene‐based conjugated polyelectrolytes to on‐chain and self‐assembled porphyrin units

A new water soluble fluorene‐based polyelectrolyte containing on‐chain porphyrin units has been synthesized via Suzuki coupling, for use in optoelectronic devices. The material consist of a random copolymer of poly{1,4‐phenylene‐[9,9‐bis(4‐phenoxy butylsulfonate)]fluorene‐2,7‐diyl} (PBS‐PFP) and a 5,15‐diphenylporphyrin (DPP). The energy transfer process between the PBS‐PFP units and the porphyrin has been investigated through steady state and time‐resolved measurements. The copolymer PBS‐PFP‐DPP displays two different emissions one located in the blue region of the spectra, corresponding to the fluorene part and another in the red due to fluorescent DPP units either formed directly or by exciton transfer. However, relatively inefficient energy transfer from the PFP to the on‐chain porphyrin units was observed. We compare this with a system involving an anionic blue light‐emitting donor PBS‐PFP and a anionic red light‐emitting energy acceptor meso‐tetrakisphenylporphyrinsulfonate (TPPS), self‐assembled by electrostatic attraction induced by Ca²⁺. Based on previous studies related to chain aggregation of the anionic copolymer PBS‐PFP, two different solvent media were chosen to further explore the possibilities of the self‐assembled system: dioxane–water and aqueous nonionic surfactant n‐dodecylpentaoxyethylene glycol ether (C₁₂E₅). In contrast, with the on‐chain PBS‐PFP‐DPP system the strong overlap of the 0‐0 emission peak of the PBS‐PFP and the Soret absorption band of the TPPS results in an efficient Förster transfer. This is strongly dependent on the solvent medium used. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

2,6‐Diaminopyridine and Acrylamide‐Based Copolymers with Upper Critical Solution Temperature‐type Behavior in Aqueous Solution

A novel copolymer based on supramolecular motif 2,6‐diaminopyridine and water‐soluble acrylamide, poly[N‐(6‐acetamidopyridin‐2‐yl) acrylamide‐co‐acrylamide], was synthesized via reversible addition–fragmentation chain transfer (RAFT) polymerization with various monomer compositions. The thermoresponsive behavior of the copolymers was studied by turbidimetry and dynamic light scattering (DLS). The obtained copolymers showed an upper critical solution temperature (UCST)‐type phase transition behavior in water and electrolyte solution. The phase transition temperature was found to increase with decreasing amount of acrylamide in the copolymer and increasing concentration of the solution. Furthermore, the phase transition temperature varied in aqueous solutions of electrolytes according to the nature and concentration of the electrolyte in accordance with the Hoffmeister series. A dramatic solvent isotope effect on the transition temperature was observed in this study, as the transition temperature was almost 10–12 °C higher in D₂O than in H₂O at the same concentration and acrylamide composition. The size of the aggregates below the transition temperature was larger in D₂O compared to that in H₂O that can be explained by deuterium isotope effect. The thermoresponsive behavior of the copolymers was also investigated in different cell medium and found to be exhibited UCST‐type phase transition behavior in different cell medium. Such behavior of the copolymers can be useful in many applications including biomedical, microfluidics, optical materials, and in drug delivery. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2064–2073     

Synthesis,Characterization, and thermoresponsive properties of Helical Polypeptides Derivatized from Poly(γ−4‐(3‐chloropropoxycarbonyl)benzyl‐L‐glutamate)

A series of side‐chain‐functionalized α‐helical polypeptides, i.e., poly(γ‐4‐(3‐chloropropoxycarbonyl)benzyl‐_L‐glutamate) (6) have been prepared from n‐butylamine initiated ring‐opening polymerization (ROP) of γ‐4‐(3‐chloropropoxycarbonyl)benzyl‐_L‐glutamic acid‐based N‐carboxyanhydride. Polypeptides bearing oligo‐ethylene‐glycol (OEG) groups or 1‐butylimidazolium salts were prepared from 6 via copper‐mediated [2+3] alkyne‐azide 1,3‐dipolar cycloaddition or nuleophilic substitution, respectively. CD and FTIR analysis revealed that the polymers adopt α‐helical conformations both in solution and the solid state. Polymers bearing OEG (m = 3) side‐chains showed reversible LCST‐type phase transition behaviors in water while polymers bearing 1‐butylimidazolium and I^? counter‐anions exhibited reversible UCST‐type transitions in water. Variable‐temperature UV‐vis analysis revealed that the phase transition temperatures (T_pts) were dependent on the main‐chain length and polymeric concentration. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2469–2480     

Synthesis and properties of fluorene‐based polyheteroarylenes for photovoltaic devices

Novel copolymers consisting of the alternating push–pull comonomers fluorene and thieno[3,4‐b]pyrazine/quinoxaline were synthesized by a palladium‐catalyzed Suzuki cross‐coupling reaction in 60–80% yields. The structure of the deeply colored copolymers was confirmed with ¹H and ¹³C NMR. All the new materials were characterized with spectroscopic and electrochemical methods. Bulk heterojunction organic solar cells based on some of the novel polymers in combination with the well‐known fullerene acceptor [6,6]‐phenyl C₆₁–butyric acid methyl ester were fabricated, and their photovoltaic parameters were measured. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6952–6961, 2006     

Linear poly(amide triazole)s derived from d‐glucose

The click reaction between azides and alkynes is been increasingly employed in the preparation of polymers. In this article, we describe the synthesis and click polyaddition reaction of a new A‐B‐type amide monomer—prepared from d ‐glucose as renewable resource—containing the alkyne and azide functions. Both Cu(I)‐catalyzed and metal‐free click polymerization methods were used to prepare glucose‐derived poly(amide triazole)s. The resulting polymers had weight‐average molecular weights in the 45,000–129,000 range and were characterized by GPC, IR, and NMR spectroscopies. Thermal and X‐ray diffraction studies revealed them to be amorphous. Their qualitative solubilities in various solvents and their water sorption have been studied. The poly(amide triazole)s having the alcohol functions protected as methyl ether were water‐soluble. The presence of the amide functions along the polymer chain made these polytriazoles degradable in the presence of sodium deuteroxide. The degradation was monitored by NMR analysis, and the degradation product was characterized by HRMS. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 629–638     

Poly(ProDOT‐Et2): A High‐Contrast,High‐Coloration Efficiency Electrochromic Polymer

The synthesis and electrochemical polymerization of 3,3‐diethyl‐3,4‐dihydro‐2H‐thieno‐[3,4‐b][1,4]dioxepine (ProDOT‐Et₂) was performed resulting in a stable electrochromic polymer capable of switching between an absorbing blue neutral state and a highly transmissive sky‐blue oxidized state in sub‐second time frames. High optical switching contrast ratios (up to 75% at λ_max) and high composite coloration efficiencies (505 cm²/C) were measured.     

Thermo‐Switchable Antibacterial Activity

A copolymer system of 2‐aminoethyl methacrylate and N‐isopropylacrylamide comprises novel properties: changes in conformation and hydrophilicity upon heating influence the antibacterial activity and result in a switchable biocidal effect. The copolymers are characterized via NMR, MALDI‐ToF MS, phase transition behavior, and antibacterial tests with E. coli or B. subtilis. MIC and MBC are determined using standard dilution methods, temperature‐dependence via incubation at different temperatures and cytotoxicity by MTT tests. The copolymers exhibit lower MIC in globule than coil conformation, crosslinking on cotton results in non‐leaching materials with better antibacterial activity above than below the phase‐transition point.

     

Persistence of nematic liquid crystalline phase in a polyfluorene‐based organic semiconductor: A high pressure study

The role of high pressure on a low molecular weight nematic liquid crystalline organic semiconductor, ethyl‐hexyl substituted polyfluorene (PF2/6) is investigated using photoluminescence (PL), Raman scattering, and X‐ray scattering studies at pressures from 1 to 8 GPa. The PL and the Raman data under pressure are consistent with each other with no abrupt changes in the pressure coefficients of PL or Raman peaks. The PL energies redshift and broaden, consistent with both enhanced intra‐ and interchain interactions. The Raman peak positions yield pressure coefficients similar to other phenyl based π‐conjugated polymers. The broadening of a doublet peak in the 1135 cm^?1 region indicates a more planar backbone conformation with increasing pressure. X‐ray scattering indicates that the torsion angle between adjacent repeats reduces with increasing pressure and reverts back with decompression. The intermolecular structure is weakly ordered (frozen nematic) and essentially maintained with increasing pressure, in contrast to a high molecular weight PF2/6. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 1014–1023     

Aryl acrylate based high‐internal‐phase emulsions as precursors for reactive monolithic polymer supports

Water‐in‐oil high‐internal‐phase emulsions (HIPEs), containing 4‐nitrophenyl acrylate and 2,4,6‐trichlorophenyl acrylate as reactive monomers, were prepared and polymerized, and highly porous monolithic materials resulted. The novel materials were studied by combustion analysis, Fourier transform infrared spectroscopy scanning electron microscopy, mercury porosimetry, and N₂ adsorption/desorption analysis. With both esters, cellular macroporous monolithic polymers were obtained; the use of 4‐nitrophenyl acrylate resulted in a cellular material with void diameters between 3 and 7 μm and approximately 3‐μm interconnects, whereas the use of 2,4,6‐trichlorophenyl acrylate yielded a foam with void diameters between 2 and 5 μm, most interconnects being around 1 μm. The resulting monoliths proved to be very reactive toward nucleophiles, and possibilities of functionalizing the novel polymer supports were demonstrated via reactions with amines bearing additional functional groups and via the synthesis of an acid chloride derivative. Tris(hydroxymethyl)aminomethane and tris(2‐aminoethyl)amine derivatives were obtained. The hydrolysis of 4‐nitrophenylacrylate removed the nitrophenyl group, yielding a monolithic acrylic acid polymer. Furthermore, functionalization to immobilized acid chloride was performed very efficiently, with more than 95% of the acid groups reacting. The measurement of the nitrogen content in 4‐nitrophenyl acrylate poly(HIPE)s after various times of hydrolysis showed the influence of the total pore volume of the monolithic polymers on the velocity of the reaction, which was faster with the more porous polymer. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 296–303, 2005     

Hydrolysis of 4‐acetoxystyrene polymers prepared by atom transfer radical polymerization

Hydrolysis of 4‐acetoxystyrene polymers prepared by atom transfer radical polymerization was carried out under various reaction conditions. It was found that hydrazinolysis of 4‐acetoxystyrene homopolymers, random and block copolymers with styrene in 1,4‐dioxane, afforded the corresponding narrow dispersed materials with phenolic groups which were substantially free from crosslinkages. Gel permeation chromatographic (GPC) analysis of these polymers revealed different extents of molecular weight distribution (MWD) broadening for the hydrolysis products for the different structures. On the other hand, by NaOH catalyzed deprotection, the 4‐acetoxystyrene polymers including triblock copolymer poly(4‐acetoxystyrene‐b‐isobutylene‐b‐4‐acetoxystyrene) suffered from some degrees of coupling or even gelation, except for poly(styrene‐b‐4‐acetoxystyrene‐b‐styrene) which also by this method could be conveniently converted to its phenolic product. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 627–633, 1999     

A review of: “The Effects of Hostile Environments on Coattings and Plastics,Acs. D. P. Garner and G. A. Stahl (Editors): Symposium Series 229, American Chemical Society,Washington, D.C., 1983, 339 pp., U.S. and Canada $47.95, export $57.95.”

Rh‐catalyzed polymerization of a new N‐propargylamide monomer having a galactose residue was investigated. The polymerization proceeded in a mixed solvent of THF and water to produce the galactose‐carrying poly(N‐propargylamide) consisting of cis‐isomer. The copolymerization of the monomer with the N‐propargylamide having the alkyl chain was also carried out.     

Water‐soluble conjugated polymers: Synthesis and optical properties

Two sets of water‐soluble poly(phenylene vinylene)s were synthesized and their optical properties were studied. The aqueous solubility of all these polymers is rendered by pendant sulfonate groups. One set of polymers (polymer I series) contains, in addition to the sulfonate pendants, dimethoxy substituents, while the other (polymer II series) contains oligo(ethylene oxide) side chains. Within each set, polymers containing lithium (Ia and IIa), sodium (Ib and IIb), and potassium (Ic and IIc) counter ions were prepared. The two sets of polymers showed different properties from physical appearance (fiber vs film) to thermal properties and to optical properties. It was found that set I polymers, with shorter side chains, exhibit stronger aggregation in aqueous solutions than set II polymers, which led to their lower fluorescence quantum yields and lower polymer‐to‐MV²⁺ quenching efficiencies. Within each set, the effect of counter ions on optical properties was noted. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5123–5135, 2007     

Sulfobetaine‐containing diblock and triblock copolymers via reversible addition‐fragmentation chain transfer polymerization in aqueous media

A novel bifunctional acrylamido‐based reversible addition–fragmentation chain transfer (RAFT) chain‐transfer agent (CTA), N,N′‐ethylenebis[2‐(thiobenzoylthio)propionamide] (CTA2), has been synthesized and used for the controlled free‐radical polymerization of N,N‐dimethylacrylamide (DMA). A comparative study of CTA2 and the monofunctional CTA N,N‐dimethyl‐s‐thiobenzoylthiopropionamide (CTA1) has been conducted. Polymerizations mediated by CTA1 result in poly(N,N‐dimethylacrylamide) (PDMA) homopolymers with unimodal molecular weight distributions, whereas CTA2 yields unimodal, bimodal, and trimodal distributions according to the extent of conversion. The multimodal nature of the PDMAs has been attributed to termination events and/or chains initiated by primary radicals. The RAFT polymerization of DMA with CTA2 also results in a prolonged induction period that may be attributed to the higher local concentration of dithioester functionalities early in the polymerization. A series of ω‐ and α,ω‐dithioester‐capped PDMAs have been prepared in organic media and subsequently employed as macro‐CTAs for the synthesis of diblock and triblock copolymers in aqueous media with the zwitterionic monomer 3‐[2‐(N‐methylacrylamido)‐ethyldimethylammonio] propane sulfonate (MAEDAPS). Additionally, an ω‐dithioester‐capped MAEDAPS homopolymer has been used as a macro‐CTA for the block polymerization of DMA. To our knowledge, this is the first example of a near‐monodisperse, sulfobetaine‐containing block copolymer prepared entirely in aqueous media. The diblock and triblock copolymers form aggregates in pure water that can be dissociated by the addition of salt, as determined by ¹H NMR spectroscopy and dynamic light scattering. In pure water, highly uniform, micellelike aggregates with hydrodynamic diameters of 71–93 nm are formed. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1262–1281, 2003     

A Straightforward Method for Preparing Well‐Defined Responsive Diselenide‐Containing Polymers Based on ATRP

Diselenide‐containing polymers are facilely synthesized from polymers prepared by atom transfer radical polymerization (ATRP). Benefiting from the ATRP technology, this protocol provides a flexible route for controlling the polymer structure, which allows for a great variety of architectures of selenium‐containing polymer materials for applications in various fields. The oxidative and reductive responsive behavior of the obtained diselenide‐containing polymers is also investigated.