Tishchenko reactions of aldehydes promoted by diisobutylaluminum hydride and its application to the macrocyclic lactone formation

Aliphatic aldehydes react with catalytic amount of Dibal-H in n-pentane to give the corresponding Tishchenko products in good to excellent yields. On contrary, α-silyloxy aldehydes give α-silyloxy ketones via Oppenauer oxidation under similar condition. Tishchenko reaction of ω-alkene aldehydes followed by RCM and hydrogenation affords a convenient method to prepare the 11-37 membered macrocyclic lactones.     

Complex formation followed by internal electron transfer: The reaction between cysteine and iron(III)

Summary A kinetic study of the anaerobic oxidation of cysteine (H₂ L) by iron(III) has been performed over thepH-range 2.5 to 12 by use of a stopped-flow high speed spectrophotometric method. Reaction is always preceded by complex formation. Three such reactive complex species have been characterized spectrophotometrically: FeL ⁺ (_max=614 nm, =2 820 M^–1cm^–1); Fe(OH)L (_max=503 nm; shoulder at 575 nm, =1 640 M^–1cm^–1); Fe(OH)L ₂ ^2– (_max=545 nm; shoulder at 445 nm, =3 175 M^–1 cm^–1). Formation constants have been evaluated from the kinetic data: Fe³⁺+L ^2– FeL ⁺: logK ₁ ^M =13.70±0.05; Fe(OH)²⁺+L ^2– Fe(OH)L: logK ₁ ^MOH =10.75±0.02; Fe(OH)L+L ^2– Fe(OH)L ₂ ^2– ; logK ₂ ^MOH =4.76±0.02. Furthermore the hydrolysis constant for iron(III) was also obtained: Fe(OH)²⁺+H⁺ Fe _aq ³⁺ : logK ^FeOH=2.82±0.02). Formation of the mono-cysteine complexes, FeL ⁺ and Fe(OH)L, is via initial reaction of Fe(OH)²⁺ with H₂ L (k=1.14·10⁴M^–1s^–1), the final product depending on thepH. FeL ⁺ (blue) formed at lowpH decomposes following protonation with a second-order rate constant of 1.08·10⁵M^–1s^–1. Fe(OH)L (purple) decomposes with an apparent third order rate constant ofk=3.52·10⁹M^–2s^–1 via 2 Fe(OH)L+H⁺ products, which implies that the actual (bimolecular) reaction involves initial dimer formation. Finally, Fe(OH)L ₂ ^2– (purple) is remarkably stable and requires the presence of Fe(OH)L for electron transfer. A rate constant of 8.36·10³M^–1s^–1 for the reaction between Fe(OH)L and Fe(OH)L ₂ ^2– is evaluated.Dedicated to Prof. Dr. mult. Viktor Gutmann on the occasion of his 70th birthday     

Alginate polyelectrolyte ionotropic gels. XIV. Kinetics and mechanism of formation of intermediate complex during the oxidation of alginate polysaccharide by alkaline permanganate with a spectrophotometric evidence of manganate(VI) transient species

The kinetics and mechanism of the [Alg.Mn ^VIO] intermediate complex formation during the oxidation of alginate polysaccharide at pHs ≥ 12 have been investigated spectrophotometrically. The reaction showed a first-order dependence in permanganate and a fractional order with respect to the alginate concentration (Alg). Kinetic and spectrophotometric evidence revealed the formation of manganate(VI) as transient species. The results obtained indicated the dependence of the rate of formation on the pH of the medium where the complex formation was base catalyzed. A mechanism consistent with the experimental results is discussed. © 1993 John Wiley & Sons, Inc.     

Synthesis of new indolylpyrrole derivatives via a four-component domino reaction between arylglyoxals,acetylacetone, indole and aliphatic amines in aqueous media

A novel synthesis of indolylpyrrole derivatives is described by a four-component domino reaction between arylglyoxals, acetylacetone, indole and aliphatic amines in water as solvent at 60?°C without using any catalyst or promoter. The FT-IR, ¹H NMR, ¹³C NMR spectral and elemental analysis confirm the structures of the products.     

Highly enantioselective hetero-Diels-Alder reaction between trans-1-methoxy-2-methyl-3-trimethylsiloxybuta-1,3-diene and aldehydes catalyzed by (R)-BINOL-Ti(IV) complex

An efficient enantioselective approach to 2,5-disubstituted dihydropyrones was developed. Some easily accessible inexpensive diol ligand metal complexes were employed, and [(R)-BINOL]₂-Ti(OiPr)₄ complex was found to be the most effective catalyst (up to 99% yield and 99% ee in the presence of 5 mol% catalyst) for the hetero-Diels-Alder reaction between trans-1-methoxy-2-methyl-3-trimethylsiloxybuta-1,3-diene (1) and aldehydes. The potential and generality of this catalyst were evaluated by a variety of aldehydes including aromatic, heteroaromatic, α,β-unsaturated and aliphatic aldehydes. Based on the isolated intermediate from the reaction of benzaldehyde being confirmed by ¹H, ¹³C NMR and HRMS data, the mechanism was proposed as a Mukaiyama aldol pathway.     

O2对燃煤烟气中As2 O3均相反应生成途径影响研究

应用量子化学密度泛函理论研究了燃煤烟气中As和AsO与O_2均相生成As_2O_3的反应机理。首先计算确定了各反应物、中间体、过渡态和产物的结构和能量,然后运用热力学和动力学方法对As_2O_3均相生成过程进行分析。结果表明,由As和AsO与O_2均相生成As_2O_3的最大反应能垒分别为32.9和157.2kJ/mol,在烟气中由As转化为As_2O_3更为容易进行。在500-1900 K下,各反应的正逆反应速率常数均随温度的提高而增大,但不同反应过程受温度影响的程度不同。As与O_2反应生成AsO和AsO_2的两个反应过程的平衡常数在所研究的温度范围内均大于10~5,能完全反应,可以认为是单向反应。AsO与O_2反应生成AsO_2的过程平衡常数在所研究的温度范围内小于10~5,反应不完全,转化率低。AsO与AsO_2生成As_2O_3(D3H)构型的平衡常数极低,反应难以进行,而生成As_2O_3(GAUCHE)构型反应能垒低,可自发进行。     

Room temperature formation of Cu3Se2 by solid-state reaction between α-Cu2Se and α-CuSe

Upon being brought into contact with each other, α-Cu₂Se and α-CuSe pellets reacted entirely forming Cu₃Se₂ at room temperature. After 10 days, the reaction was almost completed. Weight measurements revealed that copper atoms migrated from α-Cu₂Se to α-CuSe. Solid-state reactions were also observed in the (α-Cu₂Se+Cu₃Se₂) and (α-Cu₂Se+CuS) systems, but not in the (Cu₃Se₂+α-CuSe), (Cu₂S+CuS) and (α-CuSe+Cu₂S) systems. Therefore, the high ionic conductivity of copper ions in α- and β-Cu₂Se is considered to be responsible for the solid-state reactions observed in these systems.     

Enantioselective catalysis of the hetero-Diels-Alder reaction between Brassard's diene and aldehydes by hydrogen-bonding activation: a one-step synthesis of (S)-(+)-dihydrokawain

The first catalytic enantioselective hetero-Diels-Alder reaction between Brassard's diene and aldehydes has been achieved through hydrogen-bonding activation using TADDOL derivatives as catalysts to afford the corresponding delta-lactone derivatives in moderate-to-good yields and with high enantioselectivities (up to 91 % ee). The reactions can be carried out either under solvent-free conditions or in toluene. On the basis of the absolute configurations of the products and the hydrogen-bonding interaction pattern between TADDOL (alpha,alpha,alpha',alpha'-tetraaryl-1,3-dioxolan-4,5-dimethanol) and the carbonyl group disclosed by X-ray diffraction analysis, a possible mechanism for the catalytic reaction has been proposed. To demonstrate the usefulness of the methodology, a natural product, (S)-(+)-dihydrokawain, has also been prepared in 50 % isolated yield and with 69 % enantioselectivity in one step starting from 3-phenylpropionaldehyde by using this methodology. Therefore, this catalytic system is one of the most direct approaches to the construction of delta-lactone units, which will make the methodology very attractive for the synthesis of a variety of biologically important compounds and natural products.     

A rapid method for the detection of foodborne pathogens by extraction of a trace amount of DNA from raw milk based on amino-modified silica-coated magnetic nanoparticles and polymerase chain reaction

A method based on amino-modified silica-coated magnetic nanoparticles (ASMNPs) and polymerase chain reaction (PCR) was developed to rapidly and sensitively detect foodborne pathogens in raw milk. After optimizing parameters such as pH, temperature, and time, a trace amount of genomic DNA of pathogens could be extracted directly from complex matrices such as raw milk using ASMNPs. The magnetically separated complexes of genomic DNA and ASMNPs were directly subjected to single PCR (S-PCR) or multiplex PCR (M-PCR) to detect single or multiple pathogens from raw milk samples. Salmonella Enteritidis (Gram-negative) and Listeria monocytogenes (Gram-positive) were used as model organisms to artificially contaminate raw milk samples. After magnetic separation and S-PCR, the detection sensitivities were 8 CFU mL⁻¹ and 13 CFU mL⁻¹ respectively for these two types of pathogens. Furthermore, this method was successfully used to detect multiple pathogens (S. Enteritidis and L. monocytogenes) from artificially contaminated raw milk using M-PCR at sensitivities of 15 CFU mL⁻¹ and 25 CFU mL⁻¹, respectively. This method has great potential to rapidly and sensitively detect pathogens in raw milk or other complex food matrices.