Vinyl‐triazolium monomers: Versatile and new class of radically polymerizable ionic monomers

A set of eight functional 4‐vinyl‐1,2,3‐triazolium monomers were synthesized using copper catalyzed azide‐alkyne 2 + 3 Hüisgen cycloaddition. These vinyl‐trizolium monomers readily polymerized via free radical polymerization. The physical properties of the vinyl‐triazolium based poly(ionic liquid)s (PILs) are strongly dependent on the pendant functional groups. These polymers were characterized for glass transition temperature (T_g), solubility, and the thermal decomposition. The vinyl‐triazolium based PILs offer an efficient route to highly functional PILs with the advantage of facile synthesis and the ability to incorporate many desirable functional moieties. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 417–423     

Polymerized ionic liquids: Effects of counter‐anions on ion conduction and polymerization kinetics

A novel imidazolium‐containing monomer, 1‐[ω‐methacryloyloxydecyl]‐3‐(n‐butyl)‐imidazolium (1BDIMA), was synthesized and polymerized using free radical and controlled free radical polymerization followed by post‐polymerization ion exchange with bromide (Br), tetrafluoroborate (BF₄), hexafluorophosphate (PF₆), or bis(trifluoromethylsulfonyl)imide (Tf₂N). The thermal properties and ionic conductivity of the polymers showed a strong dependence on the counter‐ions and had glass transition temperatures (T_g) and ion conductivities at room temperature ranging from 10 °C to −42 °C and 2.09 × 10⁻⁷ S cm⁻¹ to 2.45 × 10⁻⁵ S cm⁻¹. In particular, PILs with Tf₂N counter‐ions showed excellent ion conductivity of 2.45 × 10⁻⁵ S cm⁻¹ at room temperature without additional ionic liquids (ILs) being added to the system, making them suitable for further study as electro‐responsive materials. In addition to the counter‐ions, solvent was found to have a significant effect on the reversible addition‐fragmentation chain‐transfer polymerization (RAFT) for 1BDIMA with different counter‐ions. For example, 1BDIMATf₂N would not polymerize in acetonitrile (MeCN) at 65 °C and only achieved low monomer conversion (< 5%) at 75 °C. However, 1BDIMA‐Tf₂N proceeded to high conversion in dimethylformamide (DMF) at 65 °C and 1BDIMABr polymerized significantly faster in DMF compared to MeCN. NMR diffusometry was used to investigate the kinetic differences by probing the diffusion coefficients for each monomer and counter‐ion in MeCN and DMF. These results indicate that the reaction rates are not diffusion limited, and point to a need for deeper understanding of the role electrostatics plays in the kinetics of free radical polymerizations. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1346–1357     

Optimizing the electrochemical performance of imidazolium‐based polymeric ionic liquids by varying tethering groups

We report the synthesis and characterization of a series of novel imidazolium cation and bis(trifluoromethane)sulfonimide anion (TFSI^?)‐based ionic liquid (IL) model compounds and their corresponding polymeric ionic liquids (PILs) with various tethering groups. Ethylene oxide repeating units were attached as tethering groups to an imidazolium cation to optimize the glass transition temperatures (T_g) and ionic conductivities of the PILs. The novel PILs exhibit excellent conductivity values of around 8 × 10^?4 S/cm at room temperature. The thermophysical and electrochemical properties of ILs, including thermal transition, ionic conductivity, and rheological behavior, were characterized to investigate the effect of tethering groups. We conclude that the length of poly(ethylene oxide) tethering group has a tremendous effect on both physical property and electrochemical behavior and that charge carrier density is dominant in defining ionic conductivity with free ILs, whereas ion mobility plays a more important role after polymerization. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1339–1350     

Stable poly (ionic liquids) with unique cross‐linked mesoporous‐macroporous structure as efficient catalyst for alkylation of o‐xylene and styrene

In this work, using divinylbenzene (D), 1‐vinylimidazole (V) and 1‐vinyl‐3‐butylimidazolium bromide ([VBIM][Br]) as monomers, the binary‐monomer poly (ionic liquids) (PILs) and ternary‐monomer PILs were successfully synthesized, via hydrothermal polymerization and anion exchange, sequentially. Compared with each other, the ternary polymeric acidic IL catalyst has a clear spongy porous structure, while having a more stable macroporous structure, a larger specific surface area, more acidic groups and more active sites. Catalytic performance of catalyst was investigated through the alkylation of o‐xylene and styrene. The effect of the amount of IL added and the length of the cation chain on the ternary polymerization of acidic IL was systematically investigated. Under optimal reaction conditions (molar ratio of monomers was D:V:[VBIM][Br] = 2:1:1, the most suitable cation chain length was C₄), the synthesized MPD‐[C₄V]‐[VBIM][SO₃CF₃] has a larger specific surface area (89.47 m²/g), large pore volume (0.29 cm³/g), and abundant mesopores and macropores, which help to improve the contact between the active site and reactants. Moreover, the catalyst could maintain a relatively high conversion of styrene (99.0%), 1,2‐diphenylethane yield (98.7%) and high thermostability under reaction and be easily be divided from the solution, which is critical for heterogeneous solid catalysts.     

Novel imidazolium‐based poly(ionic liquid)s: preparation,characterization, and absorption of CO2

The development of novel materials for carbon dioxide (CO₂) capture is of great importance in resource utilization and environmental preservation. In this study, imidazolium‐based ionic liquids (ILs) with symmetrical ester and hydroxyl groups were prepared, and their corresponding polymer were synthesized by melt condensation polymerization. The structure and properties of the poly(ionic liquid)s (PILs) were characterized by proton nuclear magnetic resonance, gel permeation chromatograph, differential scanning calorimetry, X‐ray diffraction, and scanning electron microscopy. In addition, the CO₂ sorption behavior of the IL monomers and PILs were studied at a low pressure (648.4 mmHg CO₂) and under a temperature of 25°C using a thermogravimetric analyzer. The CO₂ sorption capacity of 1,3‐bis(2‐hydroxyl ethyl)‐imidazolium hexafluorophosphate ([HHIm]PF₆, 10 mol%) was the highest among all the IL monomers and PILs studied. This capacity is also much higher than those reflected of previously reported ILs. Moreover, the sorption equilibrium of [HHIm]PF₆ was achieved within a short time. Copyright © 2011 John Wiley & Sons, Ltd.     

Chiral Fluorinated α‐Sulfonyl Carbanions: Enantioselective Synthesis and Electrophilic Capture,Racemization Dynamics,and Structure

Enantiomerically pure triflones R¹CH(R²)SO₂CF₃ have been synthesized starting from the corresponding chiral alcohols via thiols and trifluoromethylsulfanes. Key steps of the syntheses of the sulfanes are the photochemical trifluoromethylation of the thiols with CF₃Hal (Hal=halide) or substitution of alkoxyphosphinediamines with CF₃SSCF₃. The deprotonation of RCH(Me)SO₂CF₃ (R=CH₂Ph, iHex) with nBuLi with the formation of salts [RC(Me)? SO₂CF₃]Li and their electrophilic capture both occurred with high enantioselectivities. Displacement of the SO₂CF₃ group of (S)‐MeOCH₂C(Me)(CH₂Ph)SO₂CF₃ (95 % ee) by an ethyl group through the reaction with AlEt₃ gave alkane MeOCH₂C(Me)(CH₂Ph)Et of 96 % ee. Racemization of salts [R¹C(R²)SO₂CF₃]Li follows first‐order kinetics and is mainly an enthalpic process with small negative activation entropy as revealed by polarimetry and dynamic NMR (DNMR) spectroscopy. This is in accordance with a C_α? S bond rotation as the rate‐determining step. Lithium α‐(S)‐trifluoromethyl‐ and α‐(S)‐nonafluorobutylsulfonyl carbanion salts have a much higher racemization barrier than the corresponding α‐(S)‐tert‐butylsulfonyl carbanion salts. Whereas [PhCH₂C(Me)SO₂tBu]Li/DMPU (DMPU = dimethylpropylurea) has a half‐life of racemization at ?105 °C of 2.4 h, that of [PhCH₂C(Me)SO₂CF₃]Li at ?78 °C is 30 d. DNMR spectroscopy of amides (PhCH₂)₂NSO₂CF₃ and (PhCH₂)N(Ph)SO₂CF₃ gave N? S rotational barriers that seem to be distinctly higher than those of nonfluorinated sulfonamides. NMR spectroscopy of [PhCH₂C(Ph)SO₂R]M (M=Li, K, NBu₄; R=CF₃, tBu) shows for both salts a confinement of the negative charge mainly to the C_α atom and a significant benzylic stabilization that is weaker in the trifluoromethylsulfonyl carbanion. According to crystal structure analyses, the carbanions of salts {[PhCH₂C(Ph)SO₂CF₃]Li? L }₂ ( L =2 THF, tetramethylethylenediamine (TMEDA)) and [PhCH₂C(Ph)SO₂CF₃]NBu₄ have the typical chiral C_α? S conformation of α‐sulfonyl carbanions, planar C_α atoms, and short C_α? S bonds. Ab initio calculations of [MeC(Ph)SO₂tBu]^? and [MeC(Ph)SO₂CF₃]^? showed for the fluorinated carbanion stronger n_C→σ* and n_O→σ* interactions and a weaker benzylic stabilization. According to natural bond orbital (NBO) calculations of [R¹C(R²)SO₂R]^? (R=tBu, CF₃) the n_C→σ*_{S? R} interaction is much stronger for R=CF₃. Ab initio calculations gave for [MeC(Ph)SO₂tBu]Li ? 2 Me₂O an O,Li,C_α contact ion pair (CIP) and for [MeC(Ph)SO₂CF₃]Li ? 2 Me₂O an O,Li,O CIP. According to cryoscopy, [PhCH₂C(Ph)SO₂CF₃]Li, [iHexC(Me)SO₂CF₃]Li, and [PhCH₂C(Ph)SO₂CF₃]NBu₄ predominantly form monomers in tetrahydrofuran (THF) at ?108 °C. The NMR spectroscopic data of salts [R¹(R²)SO₂R³]Li (R³=tBu, CF₃) indicate that the dominating monomeric CIPs are devoid of C_α? Li bonds.     

Fluorinated polyamides and poly(amide imide)s based on 1,4‐bis(4‐amino‐2‐trifluromethylphenoxy)benzene,aromatic dicarboxylic acids,and various monotrimellitimides and bistrimellitimides: Syntheses and properties

A CF₃‐containing diamine, 1,4‐bis(4‐amino‐2‐trifluromethylphenoxy) benzene ( I ), was prepared from hydroquinone and 2‐chloro‐5‐nitrobenzotrifluoride. Imide‐containing diacids ( V _a–h and VI _a,b ) were prepared through the condensation reaction of amino acids, aromatic diamines, and trimellitic anhydride. Then, a series of soluble fluorinated polyamides ( VII _a–h ) and poly(amide imide)s ( VIII _a–h and X _a,b ) were synthesized from I with various aromatic diacids ( II _a–h ) and imide‐containing diacids ( V _a–h and VI _a,b ) via direct polycondensation with triphenyl phosphate and pyridine. The polyamides and poly(amide imide)s had inherent viscosities of 1.00–1.70 and 0.79–1.34 dL/g, respectively. All the synthesized polymers showed excellent solubility in amide‐type solvents such as N‐methyl‐2‐pyrrolidinone, N,N‐dimethylacetamide, and N‐dimethylformamide and afforded transparent and tough films via solvent casting. Polymer films of VII _a–h , VIII _a–h , and X _a,b had tensile strengths of 91–113 MPa, elongations to break of 8–40%, and initial moduli of 2.1–2.8 GPa. The glass‐transition temperatures of the polyamides and poly(amide imide)s were 254–276 and 255–292 °C, respectively, and the imide‐containing poly(amide imide)s had better thermal stability than the polyamides. The polyamides showed higher transparency and were much lighter in color than the poly(amide imide)s, and their cutoff wave numbers were below 400 nm. In comparison with isomeric IX _{c – h} , poly(amide imide)s VIII _c–h exhibited less coloring and showed lower yellowness indices. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3116–3129, 2004     

New light‐colored poly(ether imide)s based on 2,5‐di‐tert‐butylhydroquinone bis(ether anhydride) and aromatic diamines

A series of poly(ether imide)s (PEIs), III _a–k , with light color and good physical properties were prepared from 1,4‐bis(3,4‐dicarboxypheoxy)‐2,5‐di‐tert‐butylbenzene dianhydride ( I ) with various aromatic diamines ( II _a–k ) via a conventional two‐stage procedure that included a ring‐opening polyaddition to yield poly(amic acid)s (PAA), followed by thermal imidization to the PEI. The intermediate PAA had inherent viscosities in the range of 1.00–1.53 dL g^?1. Most of the PEIs showed excellent solubility in chlorinated solvents such as dichloromethane, chloroform, and m‐cresol, but did not easily dissolve in dimethyl sulfoxide and amide‐type polar solvents. The III series had tensile strengths of 96–116 MPa, an elongation at break of 7–8%, and initial moduli of 2.0–2.5 GPa. The glass‐transition temperatures (T_g) and softening temperatures (T_s's) of the III series were recorded between 232 and 285 °C and 216–279 °C, respectively. The decomposition temperatures for 10% weight loss all occurred above 511 °C in nitrogen and 487 °C in air. The III series showed low dielectric constants (2.71–3.54 at 1 MHz), low moisture absorption (0.18–0.66 wt %), and was light‐colored with a cutoff wavelength below 380 nm and a low yellow index (b^*) values of 7.3–14.8. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1270–1284, 2005     

Chair‐ and Boat‐Configurations of Silver(I) Complexes of Ditopic Ligand Involving Benzimidazolyl Substituents

The ditopic ligand 1, 2‐bis(benzimidazol‐1‐ylmethyl)benzene (L¹) as well as its silver(I) complexes [Ag₂L¹₂(CF₃CO₂)₂] ( 1 ) and [Ag₂L¹₂](CF₃SO₃)₂ · (L¹) · 2H₂O · 0.5C₂H₅OH ( 2 ) were prepared and structures characterized by X‐ray crystallography. The Ag^I atoms in 1 are trigonally coordinated by two N_BIm atoms from the arms of L¹ and by one O atom of the anion CF₃CO₂^—, while those in 2 are only linearly ligated by N_BIm. Different silver salts of CF₃CO₂^— and CF₃SO₃^— lead to different configurations of the dimeric unit [Ag₂L¹₂]²⁺: chair‐form in ( 1 ) but boat‐form in ( 2 ). The discrete molecules in both 1 and 2 are assembled into network structures through face‐to‐face π · · · π stacking and edge‐to‐face C—H · · · π interactions in the crystalline state, as well as N—H · · · O and C—H · · · O hydrogen bonds. Solution ¹H NMR studies showed the formation of one sole species in solution or a rapid equilibrium was established on the NMR time scale at room temperature.     

Structural Design of Ionic Conduction Paths in Molecular Crystals for Selective and Enhanced Lithium Ion Conduction

The molecular crystals [Li{N(SO₂CF₃)₂}{C₆H₄(OCH₃)₂}₂] and [Li{N(SO₂CF₃)₂}{C₆F₂H₂(OCH₃)₂}₂] with solid‐state lithium ion conductivity have been synthesized by the addition of two equivalents of 1,2‐dimethoxybenzene or 1,2‐difluoro‐4,5‐dimethoxybenzene to Li{N(SO₂CF₃)₂}, respectively. Single‐crystal X‐ray diffraction analysis revealed the formation of ionic conduction paths with an ordered arrangement of lithium ions in these crystal structures, afforded by the self‐ assembled stacking of molecular‐based channels consisting of N(SO₂CF₃)₂ anion and 1,2‐dimethoxybenzene frameworks as a result of intermolecular aromatic and hydrogen interactions. These compounds show selective lithium ion conductivity as the anions behave as a component unit of the conduction paths. The relationship between the crystal structure and ionic conductivity of the molecular crystals provides a clue to the development of novel solid electrolytes based on molecular crystals showing fast and selective lithium ion conduction.     

Synthesis of comb‐type polycarbosilanes via nucleophilic substitution reactions on the main‐chain silicon atoms

A series of comb‐type polycarbosilanes of the type [Si(CH₃)(OR)CH₂]_n {where R = (CH₂)_mR′, R′ = ? O‐p‐biphenyl? X [X = H (m = 3, 6, 8, or 11) or CN (m = 11)], and R′ = (CF₂)₇CF₃ (m = 4)} were prepared from poly(chloromethylsilylenemethylene) by reactions with the respective hydroxy‐terminated side chains in the presence of triethylamine. The product side‐chain polymers were typically greater than 90% substituted and, for R′ = ? O‐p‐biphenyl? X derivatives, they exhibited phase transitions between 27 and 150 °C involving both crystalline and liquid‐crystalline phases. The introduction of the polar p‐CN substituent to the biphenyl mesogen resulted in a substantial increase in both the isotropization temperature and the liquid‐crystalline phase range with respect to the corresponding unsubstituted biphenyl derivative. For R = (CH₂)₁₁? O‐biphenyl side chains, an analogous side‐chain liquid‐crystalline (SCLC) polysiloxane derivative of the type [Si(CH₃)(O(CH₂)₁₁? O‐biphenyl)O]_n was prepared by means of a catalytic dehydrogenation reaction. In contrast to the polycarbosilane bearing the same side chain, this polymer did not exhibit any liquid‐crystalline phases but melted directly from a crystalline phase to an isotropic liquid at 94 °C. Similar behavior was observed for the polycarbosilane with a fluorocarbon chain, for which a single transition from a crystalline phase to an isotropic liquid was observed at ?0.7 °C. The molecular structures of these polymers were characterized by means of gel permeation chromatography and high‐resolution NMR studies, and the crystalline and liquid‐crystalline phases of the SCLC polymers were identified by differential scanning calorimetry, polarized optical microscopy, and X‐ray diffraction. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 984–997, 2003     

Just Add Salt: A Mass Spectrometric Analysis Method for Imaging Anion‐Exchanged Poly(Ionic Liquid)s

We report the first mass spectrometric analysis of poly(ionic liquid)s (PILs) containing weakly coordinating anions introduced by a fast, simple, and quantitative postmodification method on the example of the hydrophilic, well‐defined poly(vinylbenzylpyridinium chloride) p([VBPy]Cl) species, analyzed with an in‐source collision induced dissociation‐Orbitrap mass spectrometry (MS) protocol. Using the MS approach allows for the precise structural elucidation of ion‐exchanged p([VBPy]Cl) utilizing AgX (X = NO₃⁻, CF₃CO₂⁻, BF₄⁻) salts. The anion exchange is shown to be quantitative – without observing residual chlorinated PIL – on rapid time scales, using only filtration as a standard procedure during sample preparation. In addition, the influence of weakly coordinating anions on the ionization behavior of PILs is studied in detail.

     

Synthesen und NMR‐Untersuchungen von Salzen mit den neuen Anionen [PtXn(CF3)6‐n]2— (n = 0 ‐ 5, X = F,OH, Cl,CN) und die Kristallstrukturanalyse von K2[(CF3)2F2Pt(μ‐OH)2PtF2(CF3)2]·2H2O

Syntheses and NMR Spectroscopic Ivestigations of Salts containing the Novel Anions [PtX_n(CF₃)_6‐n]^2— (n = 0 ‐ 5, X = F, OH, Cl, CN) and Crystal Structure of K₂[(CF₃)₂F₂Pt(μ‐OH)₂PtF₂(CF₃)₂]·2H₂O The first syntheses of trifluoromethyl‐complexes of platinum through fluorination of cyanoplatinates are reported. The fluorination of tetracyanoplatinates(II), K₂[Pt(CN)₄], and hexacyanoplatinates(IV), K₂[Pt(CN)₆], with ClF in anhydrous HF leads after working up of the products to K₂[(CF₃)₂F₂Pt(μ‐OH)₂PtF₂(CF₃)₂]·2H₂O. The structure of the salt is determined by a X‐ray structure analysis, P2₁/c (Nr. 14), a = 11.391(2), b = 11.565(2), c = 13.391(3)Å, β = 90.32(3)°, Z = 4, R₁ = 0.0326 (I > 2σ(I)). The reaction of [Bu₄N]₂[Pt(CN)₄] with ClF in CH₂Cl₂ generates mainly cis‐[Bu₄N]₂[PtCl₂(CF₃)₄] and fac‐[Bu₄N]₂[PtCl₃(CF₃)₃], but in contrast that of [Bu₄N]₂[Pt(CN)₆] with ClF in CH₂Cl₂ results cis‐[Bu₄N]₂[PtX₂(CF₃)₄], [Bu₄N]₂[PtX(CF₃)₅] (X = F, Cl) and [Bu₄N]₂[Pt(CF₃)₆]. In the products [Bu₄N]₂[PtX_n(CF₃)_6‐n] (X = F, Cl, n = 0—3) it is possibel to exchange the fluoro‐ligands into chloro‐ and cyano‐ligands by treatment with (CH₃)₃SiCl und (CH₃)₃SiCN at 50 °C. With continuing warming the trifluoromethyl‐ligands are exchanged by chloro‐ and cyano‐ligands, while as intermediates CF₂Cl and CF₂CN ligands are formed. The identity of the new trifluoromethyl‐platinates is proved by ¹⁹⁵Pt‐ and ¹⁹F‐NMR‐spectroscopy.     

Synthesis and thermal behavior of new poly(ethylene terephthalate‐imide)s

Copoly(ethylene terephthalate‐imide)s (PETIs) were synthesized by the melt copolycondensation of bis(2‐hydroxyethyl)terephthalate with a new imide monomer, N,N′‐bis[p‐(2‐hydroxyethoxycarbonyl)phenyl]‐biphenyl‐3,3′,4,4′‐tetracarboxydiimide (BHEI). The copolymers were characterized by intrinsic viscosity, Fourier transform infrared, ¹H NMR, differential scanning calorimetry, and thermogravimetric analysis techniques. Although their crystallinities decreased as the content of BHEI units increased, the glass‐transition temperatures (T_g) increased significantly. When 5 or 10 mol % BHEI units were incorporated into poly(ethylene terephthalate), T_g increased by 10 or 24 °C, respectively. The thermal stabilities of PETI copolymers were about the same as the thermal stability of PET, whereas the weight loss of PETIs decreased as the content of BHEI units increased. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 408–415, 2001     

A Design Strategy for Single‐Stranded Helicates using Pyridine‐Hydrazone Ligands and PbII

The reactions of py‐hz ligands ( L1–L5 ) with Pb(CF₃SO₃)₂?H₂O resulted in some rare examples of discrete single‐stranded helical Pb^II complexes. L1 and L2 formed non‐helical mononuclear complexes [Pb L1 (CF₃SO₃)₂]?CHCl₃ and Pb L2 (CF₃SO₃)₂][Pb L2 CF₃SO₃]CF₃SO₃?CH₃CN, which reflected the high coordination number and effective saturation of Pb^II by the ligands. The reaction of L3 with Pb^II resulted in a dinuclear meso‐helicate [Pb₂ L3 (CF₃SO₃)₂Br]CF₃SO₃?CH₃CN with a stereochemically‐active lone pair on Pb^II. L4 directed single‐stranded helicates with Pb^II, including [Pb₂ L4 (CF₃SO₃)₃]CF₃SO₃?CH₃CN and [Pb₂ L4 CF₃SO₃(CH₃OH)₂](CF₃SO₃)₃?2 CH₃OH?2 H₂O. The acryloyl‐modified py‐hz ligand L5 formed helical and non‐helical complexes with Pb^II, including a trinuclear Pb^II complex [Pb₃ L5 (CF₃SO₃)₅]CF₃SO₃?3CH₃CN?Et₂O. The high denticity of the long‐stranded py‐hz ligands L4 and L5 was essential to the formation of single‐stranded helicates with Pb^II.     

Lithium Cyanide Supported by O‐ and N‐Donors

A series of adducts of LiCN, namely [Li(Me₂CO₃)CN], [Li(Et₂CO₃)CN], and [Li(NMP)CN] (NMP = N‐methyl‐2‐pyrrolidone) were prepared by treatment of solvent‐free LiCN with the appropriate donor. The starting material for these approaches, donor‐free LiCN, was quantitatively prepared from Me₃SiCN and Li[Me] in diethyl ether at 0 °C. Alternatively, [Li(NMP)CN] was synthesized by metathesis reaction of LiCl with NaCN in the presence of stoichiometric amounts of NMP. Although [Li(Me₂CO₃)CN] and [Li(Et₂CO₃)CN] are water‐sensitive compounds and decompose at the exposure to air, [Li(NMP)CN] is stable in air, even at elevated temperatures. The thermal stability of [Li(NMP)CN] was proven by differential thermal analysis (DTA). [Li(NMP)CN] shows thermal stability up to temperatures of about 132 °C. To evaluate the cyanation ability the reactions of 1‐bromooctane and 3‐bromocyclohexene with unsupported LiCN, [Li(NMP)CN], and a mixture of NaCN/LiCl/NMP were investigated. We found that [Li(NMP)CN] as well as LiCl/NaCN/NMP are efficient cyanation reagents comparable to the expensive and air‐sensitive, donor‐free LiCN. A product of the chloride‐cyanide‐bromide exchange could be isolated and structurally characterized by X‐ray diffraction.     

Synthesis and characterization of phthalazinone containing poly(arylene ether)s via a novel N–C coupling reaction

High‐molecular‐weight poly(phthalazinone)s with very high glass‐transition temperatures (T_g's) were synthesized via a novel N–C coupling reaction. New bisphthalazinone monomers ( 7a–e ) were synthesized from 2‐(4‐chlorobenzoyl) phthalic acid in two steps. Poly(phthalazinone)s, having inherent viscosities in the range of 0.34–0.91 dL/g, were prepared by the reaction of the bis(phthalazinone) monomers with an activated aryl halide in a dipolar aprotic solvent in the presence of potassium carbonate. The poly(phthalazinone)s exhibited T_g's greater than 230 °C. polymer 8b synthesized from diphenyl biphenol and bis(4‐flurophenyl) sulfone demonstrated the highest T_g of 297 °C. Thermal stabilities of the poly(phthalazinone)s were determined by thermogravimetric analysis. All the poly(phthalazinone)s showed a similar pattern of decomposition with no weight loss below 450 °C in nitrogen. The temperatures of 5% weight loss were observed to be about 500 °C. The poly(phthalazinone)s containing 4,4′‐isopropylidenediphenol and 4,4′‐(hexafluoroisopropylidene) diphenol and diphenyl ether linkage were soluble in chlorinated solvents such as chloroform. Other poly‐(phthalazinone)s were soluble in dipolar aprotic solvents such as N,N′‐dimethylacetamide. The soluble poly(phthalazinone)s can be cast as flexible films from solution. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2481–2490, 2003     

Imidazolium‐based poly(ionic liquid)s with poly(ethylene oxide) main chains: Effects of spacer and tail structures on ionic conductivity

Ten types of cationic glycidyl triazole polymers (GTPs) are prepared from combinations of five alkyl‐imidazolium units (methyl‐, ethyl‐, n‐propyl‐, iso‐propyl‐, and n‐butyl‐imidazoliums) and two spacers [di‐ and tri(ethylene glycol)s]. Since these poly(ionic liquid)s are prepared from the same sample of glycidyl azide polymer by postfunctionalization method, they have the same degree of polymerization. Therefore, the structure–property relationship can be discussed without influence of molecular weight difference. The samples are characterized by NMR, differential scanning calorimetry, and thermogravimetric analysis. The ionic conductivity data are obtained by impedance measurements. The GTPs with the tri(ethylene glycol) spacer and ethyl‐ and n‐butyl‐imidazolium units afford the highest anhydrous conductivity of 1.5 × 10^?5 S cm^?1 at 30 °C. Based on electrode polarization (EP) analysis, we calculate the conducting ion (carrier) concentration and mobility. We discuss the effect of the spacer and N‐alkyl tail structures on the ionic conductivity using the data obtained by EP analysis and X‐ray diffraction. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2896–2906     

5‐(1,2,3‐Triazol‐1‐yl)tetrazole Derivatives of an Azidotetrazole via Click Chemistry

N? C bonded (non‐bridged) 5‐(1,2,3‐triazol‐1‐yl)tetrazoles were synthesized by the Cu^I‐catalyzed 1,3‐dipolar azide–alkyne cycloaddition click reaction using 5‐azido‐N‐(propan‐2‐ylidene)‐1H‐tetrazole ( 1 ). For example, the click reaction of 1 in the presence of CuSO₄?5 H₂O and Na ascorbate at 65–70 °C for 48 h in CH₃CN/H₂O co‐solvent was found to be limited to only terminal alkynes that have electron‐withdrawing groups, CF₃C?CH ( 2 a ) and SF₅C?CH ( 2 b ), giving rise to isopropylidene‐[5‐(4‐trifluoromethyl‐1,2,3‐triazol‐1‐yl)tetrazol‐1‐yl]amine ( 3 a ) and isopropylidene‐[5‐(4‐pentafluorosulfanyl‐1,2,3‐triazol‐1‐yl)tetrazol‐1‐yl]amine ( 3 b ) in 47 % and 66 % yields, respectively. When carried out under conditions using CuI and 2,6‐lutidine as catalysts at 0 °C for 13 h in CHCl₃, the click reaction was versatile toward alkynes even those having electron‐donating groups. Properties of new products were determined and compared with those of 1 . Heats of formation, detonation pressures, detonation velocities and impact sensitivities are reported for these new 5‐(1,2,3‐triazol‐1‐yl)tetrazoles.     

Single‐electron‐transfer/degenerative‐chain‐transfer mediated living radical polymerization of vinyl chloride catalyzed by thiourea dioxide/octyl viologen in water/tetrahydrofuran at 25 °C

The single‐electron‐transfer/degenerative‐chain‐transfer mediated living radical polymerization (SET–DTLRP) of vinyl chloride (VC) in H₂O/tetrahydrofuran at 25 °C catalyzed by thiourea dioxide [(NH₂)₂C?SO₂] is reported. This polymerization occurs only in the presence of a basic sodium bicarbonate (NaHCO₃) buffer and the electron‐transfer cocatalyst octyl viologen. The resulting poly(vinyl chloride) (PVC) has a number‐average molecular weight of 1500–7000 and a weight‐average molecular weight/number‐average molecular weight ratio of 1.5. This PVC does not contain detectable amounts of structural defects and has both active chloroiodomethyl and inactive chloromethyl chain ends. Because of possible side reactions caused by the primary sulfoxylate anion (SO), the catalytic activity of (NH₂)₂C?SO₂ in the SET–DTLRP of VC is lower than that of the single‐electron‐transfer agent sodium dithionite. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 287–295, 2005