Synthesis and electrochemical properties of novel redox‐active polymers with anthraquinone moieties by Pd‐catalyzed cyclopolymerization of dienes

Redox‐active polymers enhanced the focus of attention in the field of battery research in recent years. Anthraquinone is one of the most generic redox‐active functional compounds for battery applications, because the quinonide structure undergoes a redox reaction involving two electrons and features stable electrochemical behavior. Although various redox‐active polymers have been developed, the polymer backbone is mostly based on linear alkyl chains [e.g., poly(methacrylate)s, poly(ether)s]. Polymers featuring ring structures in the backbone are limited due to the restricted availability of suitable polymerization techniques [e.g., poly(norbornene)s by ROMP]. The cyclopolymerization of dienes with pendant redox‐active anthraquinone moieties by Pd catalysis represents a novel approach to synthesize redox‐active polymers featuring cyclic structures in the backbone. Electrochemical investigations, in particular cyclic voltammetry, of these new diene monomer, polymers and the corresponding polymer supported carbon paper composites were conducted in different organic electrolytes. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2184–2190     

New π‐Conjugated polymers containing 4H,4′H‐[1,1′‐Bithieno [3,4‐C]Pyrrole]‐4,4′,6,6′(5H,5′H)‐Tetraone (biTPD) units and their application to thin‐Film transistors and photovoltaic cells

We successfully synthesized new D‐A copolymers that employ 1,10‐bithienopyrrolodione (biTPD), thiophene, and selenophene‐based donor monomeric units. Two polymers, PBTPDEBT and PBTPDEBS , exhibited high degrees of crystallinity and unique polymer chain arrangements on the substrate, which is attributed to their enhanced coplanarity and intermolecular interactions between the polymer chains. Among the thin‐film transistor devices made of PBTPDEBT and PBTPDEBS , the annealed PBTPDEBS device displayed relatively high hole mobility, which was twice that of the PBTPDEBT ‐based device. In addition, an organic photovoltaic device based on a PBTPDEBS :PC₇₁BM blend displayed the maximum power conversion efficiency of 3.85%. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1228–1235     

Synthesis of pH‐ and thermoresponsive poly(2‐n‐propyl‐2‐oxazoline) based copolymers

Polymers that possess lower critical solution temperature behavior such as poly(2‐alkyl‐2‐oxazoline)s (PAOx) are interesting for their application as stimulus‐responsive materials, for example in the biomedical field. In this work, we discuss the scalable and controlled synthesis of a library of pH‐ and temperature‐sensitive 2‐n‐propyl‐2‐oxazoline P(nPropOx) based copolymers containing amine and carboxylic acid functionalized side chains by cationic ring opening polymerization and postpolymerization functionalization strategies. Using turbidimetry, we found that the cloud point temperature (CP) is strongly dependent on both the polymer concentration and the polymer charge (as a function of pH). Furthermore, we observed that the CP decreased with increasing salt concentration, whereas the CP increased linearly with increasing amount of carboxylic acid groups. Finally, turbidimetry studies in PBS‐buffer indicate that CPs of these polymers are close to body temperature at biologically relevant polymer concentrations, which demonstrates the potential of P(nPropOx) as stimulus‐responsive polymeric systems in, for example, drug delivery applications. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1573–1582     

Synthesis and characterization of colored EUDRAGIT® as enteric coating material

The synthesis of novel polymeric dyes by directly attaching toluidine blue O and MPPD via EDC and CDI coupling is described for polymers with enteric properties [poly(methacrylic acid‐co‐ethyl acrylate)]. The polymeric dyes are analyzed by SEC and UV/Vis measurements as well as investigated regarding their dissolution and permeation characteristics. Almost no changes between the modified and nonmodified polymer could be observed by conventional drug studies and a self‐established method for dissolution rates. Also no influence on the film formation properties was observed by SEM measurements. In vitro toxicity studies showed no increase of toxicity compared to the non modified polymer. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2386–2393     

Direct synthesis of tetrazine functionalities on polymer backbones

Tetrazine mediated inverse Electron Demand Diels–Alder Reaction (IEDDA) is an important modification technique due to its high selectivity and super‐fast kinetics. Incorporation of tetrazine moieties on polymer chains requires multistep synthetic pathways and a post‐polymerization step leading to functional polymeric materials. Such approaches involve separate syntheses of polymer and the molecule which will be employed in modification. Herein, we introduce a straightforward synthetic approach for direct synthesis of tetrazine groups on polymers as side chains. As model systems, tetrazine functional poly(N‐isopropylacrylamide)‐and poly(ethylene glycol)‐based polymers from corresponding precursor polymers with nitrile moieties as pendant groups are prepared and IEDDA Click Reaction is achieved with trans‐cyclooctene derivatives. The click reaction is monitored by both NMR and UV–vis spectroscopies. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 673–680     

Small changes with big effects: Tuning polymer properties with supramolecular interactions

For biological polymers like DNA and proteins, supramolecular interactions dictate the folding and assembly of the polymer chains. Advances in synthetic polymer chemistry enable the synthesis of polymers of defined length and composition, but the field has yet to reach the same level of sophistication as nature's polymers. However, the incorporation of just a few supramolecular interactions into a synthetic polymer chain can drastically change the manner in which the polymer assembles and interacts, thereby altering the properties of a polymeric material. This highlight will focus on approaches wherein a low‐density of supramolecular functionalities (<10 wt %) were used per polymer chain. How the selection of the appropriate supramolecular functionality (based on the directionality and strength of the interaction), along with the location of these groups on a polymer chain, can afford a spectrum of material properties has been highlighted. At one end, the supramolecular motif can dramatically alter the elasticity of a material, and at the other, the motif can have a more subtle effect like increasing the stability of a micelle. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 457–472     

Design and evaluation of polymer matrices for the encapsulation of CdSe/ZnS quantum dots in photonic nanocomposite thin films

A systematic approach and a new scheme for the evaluation of the as–is encapsulation of CdSe/ZnS core/shell quantum dots into polymer matrices is proposed, aiming to the implementation of thin film photonic integrated structures. Work focuses on quantum dots capped by hexadecylamine and trioctylphosphine oxide with no ligand exchange or other intermediate processing steps involved. The polymers studied include poly(methyl–methacrylate) (PMMA), polystyrene and acrylic polymers incorporating long alkyl chains, which are expected to promote the compatibility of the quantum dot ligands to that of the polymer chains. In this approach, the variation of photoluminescence properties of the nanocomposite thin films is measured versus increased concentration of the quantum dots, so as to evaluate the suitability of each polymer structure as an efficient host. Furthermore, the refractive index of the quantum dots/polymer nanocomposite thin films are also estimated using white light reflectance spectroscopy data, as appropriate for the integration of photonic devices. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 552–560     

Effect of molecular weight in diketopyrrolopyrrole‐based polymers in transistor and photovoltaic applications

Uncovering the precise effect of the conjugated polymer chain length on the semiconducting properties in thin‐film devices is confounded by the step‐growth polymerization techniques typically used. Here, we use preparatory size exclusion chromatography to isolate fractions of two diketopyrrolopyrrole‐thiophene based co‐polymers with low molar‐mass dispersity, ?_M, and number average molecular weights up to 180 kDa. We find that the charge carrier mobility can vary over three orders of magnitude in the range from 9 to 70 kDa, while a factor of 3–4 increase in photovoltaic performance was noted over the same range. The effect of ?_M was found to be most drastic when the largest chains were mixed with the shortest. The study of the thin‐film morphology and crystallinity by GIWAXS give further insights into the origin of these effects. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2245–2253     

Effects of alkyl side chains positioning and presence of fused aromatic units in the backbone of low‐bandgap diketopyrrolopyrrole copolymers on the optoelectronic properties of organic solar cells

The systematic optimization of the chemical structure of low‐bandgap (LBG) donor‐acceptor polymeric semiconductors is a challenging task for which accurate guidelines are yet to be determined. Several different structural and molecular parameters are crucial ingredients for obtaining LBG polymers that simultaneously possess high power conversion efficiencies, good processability in common organic solvents, and enhanced stability in organic photovoltaic devices. In this work, we present an extensive structure–optoelectronic properties–solar cell performance study on the emerging class of diketopyrrolopyrrole‐based LBG polymers. In particular, we investigate alkyl side chain positioning by introducing linear alkyl side chains into two different positions (α‐ and β‐), and the distance of the electron rich and electron deficient monomers within the repeat units of the polymer chain. We demonstrate that anchoring linear alkyl side chains to the α‐positions and introducing fused moieties into the polymer backbone, can be beneficial toward maintaining photocurrents similar to the unsubstituted derivative, and concurrently exhibit better processabiliy in common organic solvents. These results can provide a design rationale towards further optimization of semiconducting polymers. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 138–146     

Design of free‐standing microstructured conducting polymer films for enhanced particle removal from non‐uniform surfaces

Efficient removal of particles from topologically‐complex surfaces is of significant import for a range of applications (e.g., explosive residue removal in security arenas). Here, we synthesize next‐generation polymeric particle removal swabs with tuned structural features to elucidate the influence of the polymer microstructure on the removal of trace particles from surfaces. Specifically, microstructured free‐standing films of the conducting polymer polypyrrole (PPy) were synthesized through template‐assisted electropolymerization techniques. The removal of polystyrene microspheres from representative aluminum surfaces of varying roughness was evaluated as a function of the PPy microstructure. PPy‐based microstructured swabs displayed increased particle trapping properties relative to non‐textured PPy‐based swabs and current commercial swabs. This increased effectiveness occurred from the more intimate particle‐swab contact, leading to increased van der Waals interactions for the microstructured swabs. Therefore, this effort provides critical design rules for the production of microstructured conducting polymer materials for their application toward advanced particle removal technologies. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1968–1974     

RAFT‐based synthesis and the gelation property of telechelic polymers that can immobilize biomacromolecules

Telechelic polymers, macromolecules having two reactive end groups, can serve as building blocks for constructing polymers or polymeric materials that have complex architectures. Among the telechelic polymers, polymers bearing hydroxyl groups at two terminals have been used as components for preparation of functional materials. In the present study, RAFT polymerization of both N‐acryloylmorphorin and N‐succinimidyl acrylate by using a newly synthesized dithiobenzoate‐type chain transfer agent bearing hydroxyl groups at both terminals (HECPHD) was reported. After the acryloylation of the hydroxyl terminals of the obtained polymer, gelation was observed. Furthermore, the polymer could react with a protein via the conjugation of the succinimidyl esters‐containing polymers to the amino groups present on the protein surface. The results show that activated esters‐bearing polymers with hydroxyl groups at both terminals can be used as building blocks for constructing polymeric materials for an immobilization of biomacromolecules. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 1356–1365     

Stimuli‐responsive brush‐shaped conjugated polymers with pendant well‐defined poly(vinyl ether)s

For the synthesis of brush‐shaped conjugated polymers consisting of a poly(phenylene butadiynylene) backbone and well‐defined poly(vinyl ether) (polyVE) side chains, we designed polyVE‐based macromonomers bearing a diethynyl benzene group at the terminus and applied them to the grafting through synthesis. The macromonomer (DE‐PIBVE) was synthesized by living cationic polymerization of isobutyl VE (IBVE) using a functionalized initiator (TMS‐DEVE‐TFA) having a TMS protected diethynyl benzene moiety, followed by deprotection of the TMS groups. As a result, we succeeded in the synthesis of the target brush‐shaped conjugated polymers [poly(DE‐PIBVE)] by oxidative coupling reaction of the diethynyl benzene groups. We found that the solution of poly(DE‐PIBVE) with a specific side chain length exhibited solvatochromism and thermochromism depending on the polarity of the media employed. This phenomenon was attributed to self‐assembly in polar media due to the intermolecular π–π interaction between neighboring conjugated polymer backbones, where the self‐assembly behavior would be closely related to the pendant polyVE structure. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3318–3325     

Synthesis of conjugated polymers possessing diketopyrrolopyrrole units bearing phenyl,pyridyl, and thiazolyl groups by direct arylation polycondensation: Effects of aromatic groups in DPP on physical properties

Conjugated polymers containing phenyl‐, pyridyl‐, and thiazolyl‐flanked diketopyrrolopyrrole (DPP) were synthesized by direct arylation polycondensation of 3,4‐ethylenedioxythiophene derivatives and dibrominated DPP‐based monomers, in order to probe the effects of the aromatic groups in the DPP units on the absorption property, energy level, and crystallinity. A polymer possessing thiazolyl‐flanked DPP units was found to display long‐wavelength absorption properties and higher crystallinity than the polymers bearing phenyl‐ and pyridyl‐flanked DPP units. These features of the thiazolyl‐based polymer were afforded by its coplanar structure of the main chain. The synthesized polymers showed semiconducting properties in organic field effect transistors and organic photovoltaics. Direct arylation polycondensation is an efficient synthetic method that affords a series of DPP‐based polymers in a simple fashion and, thus, helping in a comprehensive understanding on the relationship between the aromatic groups in DPP units and their physical properties. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2337–2345     

Criss‐cross amphiphilic polymers and analogous model systems

A new class of amphiphilic polymers carrying two pendant docosyl (C22) chains, located at periodic intervals that are separated by PEG chains of varying lengths, was synthesized via a simple melt‐transesterification polymerization, using dimethyl, 2,5‐didocosyloxyterephthalate as one of the monomers. DSC, variable temperature FT‐IR, and WAXS studies demonstrated that immiscibility between the pendant docosyl units and the backbone PEG segments drives their self‐segregation; this results in the crystallization of the pendant docosyl segments and the generation of a lamellar morphology with the alkyl segments and the PEG chains occupying alternate layers. Based on the study of model criss‐cross amphiphiles that resemble the polymer repeat unit, it is postulated that the chains reconfigure such that both the docosyl chains fold to one side of the terephthalate unit while the PEG segments form a loop on the other side; these chains then organize in a bilayer to form the lamellar structure. The simplicity of the synthesis and the rather unique properties of these polymers suggests that such a design could be translated to develop other interesting functional materials that could exploit the immiscibility‐driven microphase separation for the generation of sub‐10 nm domains; these could have potential applications, such as in membranes, solid polymer electrolyte formulations, and so forth. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1554–1563     

Influence of molecular weight on the short‐channel effect in polymer‐based field‐effect transistors

In this study, we demonstrate how the intrinsic properties of a polymer can influence the electrical characteristics of organic field‐effect transistors (OFETs). OFETs fabricated with three batches of poly[2‐methoxy,5‐(3′,7′‐dimethyl‐octyloxy)]‐p‐phenylene vinylene (MDMO‐PPV) were investigated. The properties of the polymers were initially investigated using Fourier transform infrared spectroscopy (FTIR), impedance spectroscopy (IS), gel permeation chromotography (GPC), and cyclic voltammetry (CV), respectively. The structure and purity of the polymer batches were found to be very comparable, but the molecular weight (M_n and M_w) and polydispersity (PDI = M_w/M_n), varied between the samples and the HOMO and LUMO levels of the polymers were found to depend on the molecular weight properties. OFETs were then fabricated with the polymers and electrically characterized. It was observed that the channel current and the field‐effect mobility increase with increasing polymer molecular weight. The output characteristics of the transistors, on the other hand, were found to depend on the PDI of the polymer. Saturation of the channel current occurs at higher source–drain voltages and short‐channel behavior was observed to start at longer channel lengths for polymers with a higher PDI. This behavior is observed to be thickness dependent, and the short‐channel behavior was more pronounced for thicker MDMO‐PPV films. These results are explained in terms of influences of chain packing and ordering and high bulk currents on the FET output and transistor parameters. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 50: 117–124, 2012     

Radiation damage in polymer films from grazing‐incidence X‐ray scattering measurements

Grazing‐incidence X‐ray scattering (GIXS) is widely used to analyze the crystallinity and nanoscale structure in thin polymer films. However, ionizing radiation will generate free radicals that initiate crosslinking and/or chain scission, and structural damage will impact the ordering kinetics, thermodynamics, and crystallinity in many polymers. We report a simple methodology to screen for beam damage that is based on lithographic principles: films are exposed to patterns of X‐ray radiation, and changes in polymer structure are revealed by immersing the film in a solvent that dissolves the shortest chains. The experiments are implemented with high throughput using the standard beam line instrumentation and a typical GIXS configuration. The extent of damage (at a fixed radiation dose) depends on a range of intrinsic material properties and experimental variables, including the polymer chemistry and molecular weight, exposure environment, film thickness, and angle of incidence. The solubility switch for common polymers is detected within 10–60 s at ambient temperature, and we verified that this first indication of damage corresponds with the onset of network formation in glassy polystyrene and a loss of crystallinity in polyalkylthiophenes. Therefore, grazing‐incidence X‐ray “patterning” offers an efficient approach to determine the appropriate data acquisition times for any GIXS experiment. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1074–1086     

Negative thermal expansion of poly(vinylidene fluoride) and polyethylene tie molecules: A molecular dynamics study

The mechanism of thermal actuation for poly(vinylidene fluoride) (PVDF) and polyethylene (PE) tie molecules has been investigated using molecular dynamics simulations. Tie molecules are found in semicrystalline polymers and are polymer chains that link two (or more) crystalline lamellae, allowing for the transfer of force between these regions. A novel simulation technique has been developed to enable measurement of changes in the tie molecule length upon heating. We investigate the dependence of the percentage actuation observed upon heating, on the external applied force that stretches the tie molecules, the temperature range used for heating as well as the length and the number of tie molecules. Two molecular level mechanisms for actuation are identified. An entropically driven mechanism occurs at low applied forces and is applicable to all flexible polymers. A second mechanism due to conformational changes is observed for PVDF but not for PE at intermediate applied forces. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2223–2232     

In situ film characterization of thermally treated microstructured conducting polymer films

Based on a low‐cost fabrication routine microstructured conducting polymer films of poly (dioctylfluorene‐co‐benzothiadiazole) (F8BT) are prepared without any heat treatment or vacuum steps. The influence of thermal annealing at temperatures below the glass transition temperature of F8BT on such microstructured channel structures is investigated. In the applied structuring routine, a F8BT film is spin coated on a channel‐type hard master structure and afterwards floated on a flat support. Thereby, the properties of the final polymeric structures, for example channel width and height, can be tuned by simply varying the polymer concentration in solution and using the same master structure. With in situ grazing incidence small angle X‐ray scattering and imaging ellipsometry the installed channel structure and the influence of thermal treatment are probed. A complex interplay between a macroscopic polymer flow (reduced channel heights) and a molecular rearrangement (formation of mesoscopic crystallites) takes place during thermal annealing. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Synthesis and characterization of new sulfone‐derivatized phenylenevinylene‐based conjugated copolymers with evolving energy levels and gaps

A new series of stable, processable, and chain end functionalizable sulfone‐derivatized phenylenevinylene‐based conjugated polymers (SFPVs) containing different donor type comonomers have been synthesized and characterized. The polymer main chains are consisted of a sulfone‐phenylene electron accepting unit coupled with an electron donating unit which is derived from one of the dialdehyde comonomers based on benzene, thiophene, and pyrrole (with or without alkoxy side chains). The optical energy gaps (E_g) of the new polymers (in solvent) are in a range of 1.9–2.3 eV, with the lowest energy gap obtained from the polymer containing pyrrole as the donor unit. By using a combination of strong donor unit (such as pyrrole) and a relatively weak but stable acceptor unit (sulfone‐substituted benzene), E_g of the conjugated polymers can be tailored to below 2 eV, while the vinylene bonds on the polymer main chain are still chemically stable to survive strong basic conditions as compared with the S,S‐dioxo‐thiophene‐based PTV polymers developed earlier for potential supra‐molecular block copolymer systems. The lowest energy gap P(Pyrrole‐SFPV) exhibited 10 times better photoelectric power conversion efficiency than P(TV‐SFPV). © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012