Photoresponsive self-assembly and self-organization of hydrogen-bonded supramolecular tapes

Self-assembling building blocks that are readily functionalizable and capable of achieving programmed hierarchical organization have enabled us to create various functional nanomaterials. We have previously demonstrated that N,N'-disubstituted 4,6-diaminopyrimidin-2(1 H)-one (DAP), a guanine-cytosine hybridized molecule, is a versatile building block for the creation of tapelike supramolecular polymer species in solution. In the current study, DAP was functionalized with azobenzene side chains. 1H NMR, UV/Vis, and dynamic light scattering studies confirmed the presence of nanometer-scale tapelike supramolecular polymers in alkane solvents at micromolar regimes. At higher concentrations (millimolar regimes), the supramolecular polymers hierarchically organized into lamellar superstructures to form organogels, as shown by X-ray diffraction and polarized optical microscopy. Remarkably, the azobenzene side chains are photoisomerizable even in the supramolecular polymers, owing to their loosely packed state supported by the rigid hydrogen-bonded scaffold, enabling us to establish photocontrollable supramolecular polymerization and higher order organization of the tapelike supramolecular polymers into lamellar superstructures.     

Hierarchical self-assembly of a bow-shaped molecule bearing self-complementary hydrogen bonding sites into extended supramolecular assemblies

The bow-shaped molecule 1 bearing a self-complementary DAAD-ADDA (D=donor A=acceptor) hydrogen-bonding array generates, in hydrocarbon solvents, highly ordered supramolecular sheet aggregates that subsequently give rise to gels by formation of an entangled network. The process of hierarchical self-assembly of compound 1 was investigated by the concentration and temperature dependence of UV-visible and (1)H NMR spectra, fluorescence spectra, and electron microscopy data. The temperature dependence of the UV-visible spectra indicates a highly cooperative process for the self-assembly of compound 1 in decaline. The electron micrograph of the decaline solution of compound 1 (1.0 mM) revealed supramolecular sheet aggregates forming an entangled network. The selected area electronic diffraction patterns of the supramolecular sheet aggregates were typical for single crystals, indicative of a highly ordered assembly. The results exemplify the generation, by hierarchical self-assembly, of highly organized supramolecular materials presenting novel collective properties at each level of organization.     

Multifunctionalization of synthetic polymer systems through self-assembly

A straightforward methodology towards the replacement of covalent strategies for the synthesis of multifunctional synthetic materials with a self-assembling strategy that employs multiple noncovalent recognition units to attach multiple functional molecules to a polymeric scaffold is outlined. Design requirements, advantages, and potential applications, as well as the possibility of rapid optimization of materials during the manufacturing process as a result of the parallel character of self-assembly, are presented. While still in its infancy, this novel methodology may overcome several shortcomings of current covalent multifunctionalization strategies and may yield highly complex materials that are extremely difficult or impossible to fabricate with current methods.     

Self-assembly of folic acid derivatives: induction of supramolecular chirality by hierarchical chiral structures

Hierarchical chiral structures made up of dendritic oligo(L- or D-glutamic acid) moieties of folic acid derivatives induce supramolecular chirality in the self-assembled columnar structures of the folic acids. These folic acids self-assemble through the intermolecular hydrogen bonds of the pterin rings to form disklike tetramers. In the neat states, the stacked tetramers form thermotropic hexagonal columnar phases over wide temperature ranges, including room temperature. Addition of alkali metal salts induces chirality in the columnar phases. In dilute solution states in a relatively polar solvent (chloroform), the folic acid derivatives form non-chiral, self-assembled structures. In the presence of sodium triflate, the folic acid forms chiral columnar assemblies through the oligo(L-glutamic acid) moiety, similar to those formed in the liquid-crystalline (LC) states. The enantiomer of the folic acid induces columnar assemblies with reversed helicity. In the case of the diastereomer, no induced helicity is observed. Application of an apolar solvent (dodecane) drives the folic acid derivatives to form chiral assemblies in the absence of ions. In this case, lipophilic interactions promote nanophase segregation, which enhances the formation of chiral columns. Interestingly, the chiral supramolecular structure of the diastereomer induces the most intense circular dichroism. In both cases, the molecular chirality in the oligo(glutamate) moieties yields supramolecular chirality of the folic acids that self-assemble through cooperative molecular interactions.     

Sterically and guest-controlled self-assembly of calix[4]arene derivatives

In solvents such as chloroform or benzene, tetraurea calix[4]arenes 1 form dimeric capsules in which one solvent molecule is usually included as guest. To explore the structural requirements for the formation of such hydrogen-bonded dimers we replaced one p-tolylurea residue by a simple acetamide function. The resulting calix[4]arene 2 a, substituted at its wide rim with one acetamide and three p-tolylurea functions, assumes a C(1)-symmetrical conformation in apolar solvents as shown by (1)H NMR, which is not compatible with the usual capsule. In the crystalline state, four molecules of 2 a, adopting a pinched cone conformation, assemble into a quasi S(4)-symmetrical tetramer stabilized by a cyclic array of 24 NH.O==C hydrogen bonds and four NH.pi interactions. Four acetamide groups are hydrogen-bonded to each other and pack tightly in the center of the assembly. All polar residues are buried inside the tetramer, the surface of which is lipophilic. Extensive NMR studies revealed similar structures in apolar solvents such as [D]chloroform or [D(6)]benzene for calixacetamides 2 a-c. The formation of these tetramers in solution is critically dependent on the size of the amide fragment, so that propionamide 2 d, butyramide 2 e, and p-tolylamide 2 f form only ill-defined aggregates. This is caused by steric crowding inside the tetrameric assembly. The tetramers persist during molecular dynamics simulations, and the optimized average structure of the MD run is similar to that found in the crystalline state. Theoretical studies revealed that cooperation of hydrogen bonds with multiple NH.pi, C--H.pi, and pi.pi attractions make the tetramer more stable than the capsular dimer with the solvent as guest. In the presence of tetraethylammonium salts, however, compounds 2 a-e form dimeric capsular assemblies, each incorporating a single ammonium cation. Only one of two possible regioisomeric dimers is formed, in which both acetamide groups are surrounded by two urea residues. These examples give striking evidence of how self-assembly in solution can be strongly dependent on subtle structural factors and of how the formation of dimeric capsules can be induced by the presence of an appropriate guest.     

Coadsorption-induced reconstruction of supramolecular assembly characteristics.

A host supramolecular structure consisting of bis-(2,2':6',2"-terpyridine)-4'-oxyhexadecane (BT-O-C16) is shown to respond to coadsorbed molecules in dramatic ways, as observed by scanning tunneling microscopy (STM) on a highly oriented pyrolytic graphite (HOPG) surface under ambient conditions. Interestingly, the lattice parameter of the triphenylene-filled complex differs significantly from that of the coronene-filled one, although the triphenylene and coronene molecules are nearly the same size. The STM study and density functional theory calculations reveal that intermolecular hydrogen-bond interactions play an essential role in forming the assembly structures. The different electronic properties of coronene and triphenylene molecules are responsible for the difference in lattice parameters and consequently for the difference in filling behaviors in the coronene/BT-O-C16 and triphenylene/BT-O-C16 binary systems.     

A competitive molecular recognition study: syntheses and analysis of supramolecular assemblies of 3,5-dihydroxybenzoic acid and its bromo derivative with some N-donor compounds

A molecular recognition study of 3,5-dihydroxybenzoic acid (1) and its bromo derivative 4-bromo-3,5-dihydroxybenzoic acid (2) with the N-donor compounds 1,2-bis(4-pyridyl)ethene (bpyee), 1,2-bis(4-pyridyl)ethane (bpyea), and 4,4'-bipyridine (bpy) is reported. Thus, the syntheses and structural analysis of molecular adducts 1 a-1 c (1 with bpyee, bpyea, and bpy, respectively) and 2 a-2 c (2 with bpyee, bpyea, and bpy, respectively) are discussed. In all these adducts, recognition between the constituents is established through either O--H...N and/or O--H...N/C--H...O pairwise hydrogen bonds. In all the adducts both OH and COOH functional groups available on 1 and 2 interact with the N-donor compounds, except in 2 a, in which only COOH (COO-) is involved in the recognition process. The COOH moieties in 1 a, 1 b, and 2 b form only single O--H...N hydrogen bonds, whereas in 1 c and 2 c, they form pairwise O--H...N/C--H...O hydrogen bonds. In addition, subtle differences in the recognition patterns resulted in the formation of cyclic networks of different dimensions. In fact, only 1 c forms a four-molecule cyclic moiety, as was already documented in the literature for this kind of assemblies. All complexes have been characterized by single-crystal X-ray diffraction. The supramolecular architectures are quite elegant and simple, with stacking of sheets in all adducts, but a rather complex network with a threefold interpenetration pattern was found in 2 c.     

Photocontrollable self-assembly

The incorporation of photoswitching molecules into molecular building blocks creates the possibility of photoresponsive self-assemblies in which the self-assembled architecture or self-assembling process can be controlled by external light stimulus. Among the photoswitching molecules, azobenzene has been used most widely by virtue of the large photoinduced changes in its molecular geometry and physical properties. This article reviews how azobenzene can be effectively used to construct the self-assemblies in which supramolecular structure and formation/dissociation can be altered by light.     

Self-assembly of supramolecular architectures and polymers by orthogonal metal complexation and hydrogen-bonding motifs

A modular construction kit with two orthogonal noncovalent binding sites for self-assembly of supramolecular architectures is presented. The heteroditopic building blocks contain a terpyridine (tpy) unit for coordination of metal ions and a Hamilton receptor for multiple H-bonding of cyanuric acid derivatives. The association constants of ligand binding of M(II) complexes (M=Ru, Zn, Fe, and Pt) with a dendritic end cap were determined to be in the range of 10(2) and 10(4) L mol(-1) in chloroform. The capabilities for binding of metal ions were investigated by (1)H NMR and UV/Vis spectroscopy. The Fe complexes are most appropriate for the generation of discrete and high-ordered architectures due to their strong tendency to form FeL(2) complexes. Superstructures are readily formed in a one-pot procedure at room temperature. No mutual interactions between the orthogonal binding motifs were observed, and this demonstrates the highly specific nature of each binding process. Decomplexation experiments were carried out to examine the reversibility of Fe-tpy coordination. Substitution of the terminal end cap with a homoditopic bis-cyanurate linkage leads to formation of an iron-containing supramolecular strand. Formation of coordination polymers was confirmed by viscosity measurements. The supramolecular polymer strands can be reversibly cleaved by addition of a terminating cyanuric acid building block, and this proves the dynamic nature of this noncovalent polymerization process.