Structures of beta-FeOOH particles formed in the presence of Ti(IV), Cr(III), and Cu(II) ions

beta-FeOOH particles were prepared by aging aqueous FeCl3 solutions containing Ti(IV), Cr(III), and Cu(II) at room temperature for 360 days. The structures of the formed particles were investigated by various techniques including TEM, XRD, XAFS, and adsorption of N2 and H2O. Ti(IV) markedly impeded the crystallization and particle growth of beta-FeOOH by coprecipitation with Fe(III) and disturbing the short-range structure of beta-FeOOH particles. In the presence of a large amount of Ti(IV), it was pronounced that the hydrolysis of Ti(IV) impeded beta-FeOOH formation by reducing the solution pH, whereas Cr(III) and Cu(II), which were hardly involved in the products, gave rise to no noticeable effects on the formation of beta-FeOOH particles. The knowledge obtained in this study can be available for interpretation of the anti-corroding function of Ti alloyed with steels in a Cl- -containing environment.     

Preparation, characterization and metal sorption studies of a Chrome-Azurol-S-loaded anion-exchange resin

Chrome Azurol S (CS) was mobilized on an strongly basic anion-exchange resin (Dowex 2 x 4, in Cl(-) form) by batch equilibration. The modified resin was stable in acetate buffer solution and in 0.1 M HCl and H(2)SO(4), but it was readily degraded with 2-6 M HCl and HNO(3). Retention of Ba(II), Sr(II), Ca(II), Mg(II), Al(III), Cr(III), Zn(II), Fe(III), Ti(IV), Mn(II), Co(II), Ni(II), Cu(II), Cd(II) and Pb(II) was studied using the batch equilibration method. The uptake and recovery yields were determined by using inductively-coupled plasma atomic emission spectroscopy (for Mg, Al, Cr, Ti, Fe, Mn, Ni, Zn, Cu, Cd and Pb) and atomic absorption spectrophotometry (for Ba, Sr, Ca and Co). The optimum pH value was established for performing a selective separation of Al(III) from the other metal ions. The sorption capacities of the CS-loaded resing for Al(III), Cr(III), Mg(II) (at pH 6), Fe(III) (at pH 5) and Ti(IV) (at pH 4) were 14, 2.9, 0.3, 3 and 3.9 mumoles g(-1) respectively. On this basis a method for separating Al(III) from other cations was established.     

Effects of vinyl series polymers on the formation of hematite particles in a forced hydrolysis reaction

The influence of polymers on the formation of hematite particles from forced hydrolysis of acidic FeCl(3) solution was investigated using vinyl series polymers with different functional groups. The disk-like hematite particles were produced from forced hydrolysis of acidic FeCl(3) solution in the presence of polyvinyl alcohol (PVA: 0-1 wt%). On the other hand, spherical particles were produced by addition of very small amounts of polyacrylamide (PAAm: 0-0.004 wt%). The size of spherical particles was slightly decreased with increase in the concentration of PAAm. The ellipsoidal particles were precipitated by addition of a very low concentration of polyacrylic acid (PAAc: 0-0.004 wt%). The effect of polymers on the hematite particle formation was expressed in the order of PVA相似文献   

Separation of titanium, iron and aluminium on a chelating resin with benzoylphenylhydroxylamine group and application to bauxite and clay

Summary A chelating polystyrene based resin containing N-benzoyl-N-phenylhydroxylamine has been sythesized by two methods and characterized. Conditions for quantitative separation of Ti(IV), Fe(III) and Al(III) on the resin have been studied. A method has been developed for the determination of these three metal ions in bauxite or clay samples after their separation on the resin with recoveries of 98.5–99.5% for different metal ions. The maximum sorption values are observed at pH 1, 2.5 and 2.5 for Ti(IV), Fe(III) and Al(III), respectively, which are recovered by successive elution with 1 mol/l H₂SO₄, 2 mol/l HCl and 4 mol/l H₂SO₄ in the above order.     

Effects of amino acids on the formation of hematite particles in a forced hydrolysis reaction

The influence of amino acids on the formation of hematite particles from a forced hydrolysis reaction of acidic FeCl3 solution was examined. The spherical particles were produced on the systems with L-phenylalanine (L-Phe), L-serine (L-Ser) and L-alanine (L-Ala), though L-glutamine (L-Gln) and L-glutamic acid (L-Glu) gave ellipsoidal hematite particles. This morphological change in hematite particles is consistent with the order of stability constant of amino acids against to Fe3+ ions (K). The hematite particles produced with L-Glu, L-Gln and L-Ser were highly porous because they are formed by aggregation of cluster particles. These particles exhibited microporous behavior by outgassing the particles below 200 degrees C while they changed to mesoporous after treating above 300 degrees C by elimination of amino acids molecules remained between the cluster particles within the hematite particles. The hematite particles strongly depended on the nature of amino acids such as alternation of solution pH and adsorption affinity to beta-FeOOH and/or polynuclear primary (PN) particles. The systems on L-Ala and L-Phe, showing very rapid phase transformation from beta-FeOOH to hematite, exhibited the Ostwald ripening. A rotational particle preparation procedure suggested that the morphology of hematite particle is governed by the mode and strength of amino acid adsorption onto beta-FeOOH and/or PN particles.     

Synthesis of poly(acrylamidrazone-hydrazide) chelating fiber and application of enrichment-separation for traces of indium, tin, chromium, vanadium and titanium from solution samples

A poly(acrylamidrazone-hydrazide) chelating fiber has been synthesized from polyacrylonitrile fiber and used for enrichment-separation of traces of In(III), Sn(IV), Cr(III), VO(I) and Ti(IV) from solution samples with satisfactory results. These ions (5-250 ng/ml) can be quantitatively enriched (recovery > 95%) by the fiber at a 10 ml/min flow rate in the pH range 4-7, and desorbed quantitatively (recovery > 95%) with 10 ml of 2-5M hydrochloric acid from a fiber column at 6 ml/min flow rate. When the fiber, which had been stored in a glass bottle for about two years and then treated with strong acids (concentrated hydrochloric or nitric acid), was reused 10 times, the recoveries of the above ions by enrichment were still over 94%, and hundred-fold to thousand-fold excesses of Cu(II), Zn(II), Co(II), Ca(II), Mg(II), Fe(III) and Al(III) caused little interference in the determination of these ions by ICP-AES. The lowest concentrations for the proposed method were 50 ng/ml and In and Sn and 5 ng/ml for Cr, V and Ti. The RSD was 1.2-4.0%. The contents of these ions in real solution samples determined by this method were basically in agreement with the certified values of the samples, with average errors below 3.3%. The IR spectra of the fiber adsorbed with Cr(III) or VO(I) showed that Cr(III) or VO(I) combined mainly with nitrogen atoms in the fiber to form a coordination complex.     

Systematic control of size,shape, structure,and magnetic properties of uniform magnetite and maghemite particles

As an application of the gel-sol method especially developed for the synthesis of general monodisperse particles in large quantities, uniform hematite (alpha-Fe2O3), magnetite (Fe3O4), and maghemite (gamma-Fe2O3) particles, precisely controlled in size, aspect ratio, and internal structure, have been prepared. For the synthesis of uniform ellipsoidal single-crystal particles of alpha-Fe2O3, a highly condensed suspension of fine beta-FeOOH particles doped with a prescribed amount of PO4(3-) ion in their interiors was aged at 140 degrees C for 24 h with seed particles of alpha-Fe2O3 in an acidic medium containing optimum concentrations of HCl and NaNO3. Systematic control of the aspect ratio and mean size was achieved by regulating the concentration of PO4(3-) ion incorporated into the beta-FeOOH particles and the number of seeds added. The resulting hematite particles were converted into magnetite by reduction in a H2 stream at 330 degrees C for 6 h; the magnetite was then oxidized to maghemite in an air stream at 240 degrees C for 2 h. Magnetite and maghemite thus prepared retained the original shape of the hematite. On the other hand, polycrystalline hematite particles of different sizes and aspect ratios were also prepared by aging a condensed Fe(OH)3 gel in the presence of different concentrations of SO4(2-) ion and seeds. The polycrystalline hematite particles were similarly converted into magnetite and then maghemite. The magnetic properties of these magnetite and maghemite particles were analyzed as a function of their mean particle volume, aspect ratio, and internal structure.     

Ion flotation behaviour of thirty-one metal ions in mixed hydrochloric/nitric acid solutions

The ion flotation of 31 metal ions in hydrochloric/nitric acid solution with the cationic surfactant cetylpyridinium chloride was investigated. A 25-ml portion of 0.27-2.87 x 10(-4)M metal ion and 1.8-6.0 x 10(-4)M cetylpyridinium chloride solution in 0.17-3.4M acid mixture ([HCl]:[HNO(3)] = 2.4:1) was subjected to flotation in a cell, 22.5 cm high and 4.0 cm in diameter, for 5 min, with nitrogen bubbles. Ir(IV), Pt(IV), Ge(IV), Sn(IV), Bi(III), Au(III), Tl(III), Pd(II) and Sn(II) were floated from solution in 95-100% yield; Ru(III), Rh(III), Ir(III), Hg(II), Ag(I) and Tl(I) were partly floated, while Cr(VI), Ti(IV), Zr(IV), Ga(III), In(III), Fe(III), Sb(III), Al(III), Mn(II), Fe(II), Co(II), Ni(II), Cu(II), Zn(II), CD(II) and Pb(II) were floated with less than 20% yield. The flotation behaviour of these metal ions in the mixed acid system was compared with that in hydrochloric acid. The flotation is more efficient in the mixed acid system.     

Titanium(IV) tungstosilicate and titanium(IV) tungstophosphate: two new inorganic ion exchangers

Crystalline phases of Ti(IV) tungstosilicate and Ti(IV) tungstophosphate have been synthesised. The ion-exchange capacities of Ti(IV) tungstosilicate and Ti(IV) tungstophosphate have been reported as 0.44 and 0.80 mequiv./g, respectively. Both materials show monofunctional ion-exchange characteristic and are stable in 0.1 M solutions of HNO3, HCl, H2SO4 and acetone and benzene. Ti(IV) tungstosilicate is found to be more stable thermally than Ti(IV) tungstophosphate (loss in ion-exchange capacity was found as 58 and 80%, respectively for samples heated at 200 degrees C). The Kd values for heavy metals such as Pb, Hg, Cd, Sb, Co, Zn, Ni, Fe, Cr etc. have been reported in demineralised water and two surfactant media by batch processes. Cr3+, Fe3+ and Sn4+ are totally adsorbed on both the materials in demineralised water while a decrease in Kd value with increase in concentration of two surfactants is reported. On the basis of Kd values for metal ions, thirteen binary separations and five ternary separations on Ti(IV) tungstosilicate and thirteen different binary separations and four different ternary separations on Ti(IV) tungstophosphate have been achieved. Separation of methylamine from ethylamine has been done by GC on a column packed with Ti(IV) tungstophosphate.     

Extractive-spectrophotometric determination of molybdenum with 4-unsubstituted-5-pyrazolones

A fairly sensitive and selective method for rapid determination of tracer amounts of molybdenum(V) as mixed-ligand complexes with thiocyanate and 4-unsubstituted-5-pyrazolones is described. The red complexes are extractable into chloroform from 1-5M hydrochloric or perchloric acid or 1-3M sulphuric arid media. The molar absorptivities are in the range 1.72-2.15 x 10(4)l.mole(-1).cm(-1) at 455 nm (lambda(max)). The method has been applied to the estimation of molybdenum in various synthetic and alloy-steel samples. In presence of excess of the reagent, Cu(II), Co(II), Mn(II), Fe(II), Fe(III), Al(III), Cr(III), Cr(VI), Ti(III), Ti(IV), Zr(IV), Hf(IV), V(III), V(IV), V(V), Nb(V), Ta(V), W(VI) and U(VI) do not interfere.     

Adsorption of metal ions on activated carbon from aqueous solutions at pH 1-13

Adsorption of microgram amounts of 20 metal species on activated carbon powder from aqueous solutions of pH 1-13 was investigated. The species examined were Cs(I), Y(III), Ce(III), Ti(IV), Zr(IV), Cr(III), Cr(VI), Mn(II), Fe(III), Co(II), Ni(II), Ru(III), Cu(II), Ag(I), Zn(II), Cd(II), Al(III), Pb(II), Sb(III) and Bi(III).     

Liquid – liquid extraction behavior of V(IV) using phosphinic acids as extractants

The extraction behavior of V(IV) in the presence of Mo(VI), W(VI), U(VI), V(V), Ti(IV), Al(III), Cr(III), Fe(III), Mn(II), Zn(II) and Pb(II) has been studied using two alkylphosphinic acid extractants, Cyanex 272 and 301. The effect of various parameters, such as the nature of diluent, the type of mineral acid and the concentration of the acid, and metal ions has been investigated. The loading and recycling capacity of the extractants has been assessed. Based on the distribution data some binary separations from V(IV) were achieved. Received: 24 October 1996 / Revised: 2 July 1997 / Accepted: 5 July 1997     

Liquid – liquid extraction behavior of V(IV) using phosphinic acids as extractants

The extraction behavior of V(IV) in the presence of Mo(VI), W(VI), U(VI), V(V), Ti(IV), Al(III), Cr(III), Fe(III), Mn(II), Zn(II) and Pb(II) has been studied using two alkylphosphinic acid extractants, Cyanex 272 and 301. The effect of various parameters, such as the nature of diluent, the type of mineral acid and the concentration of the acid, and metal ions has been investigated. The loading and recycling capacity of the extractants has been assessed. Based on the distribution data some binary separations from V(IV) were achieved. Received: 24 October 1996 / Revised: 2 July 1997 / Accepted: 5 July 1997     

Efficiency and mechanism of new poly(acryl-phenylamidrazone phenylhydrazide) chelating fiber for adsorbing trace Ga, In, Bi, V and Ti from solution

A new po1y(acrylphenylamidrazone phenylhydrazide) chelating fiber is synthesized from polyacrylonitrile fiber and used for preconcentration and separation of trace Ga(III), In(III), Bi(III), V(V) and Ti(IV) from solution (5–50 ng ml⁻¹ Ti(IV) or V(V) and 50–500 ng ml⁻¹ Ga(III), In (III) or Bi(III) in 1000–100 ml of solution can be enriched quantitatively by 0.15 g of fiber at a 4 ml min⁻¹ flow rate in the pH range 5–7 with recoveries >95%). These ions can be desorbed quantitatively with 20 ml of 4 M hydrochloric acid at 2 ml min⁻¹ from the fiber column. When the fiber which had been treated with concentrated hydrochloric acid and washed with distilled water until neutral was reused eight times, the recoveries of the above ions by enrichment were still >95%. Two-hundred-fold to 10 000-fold excesses of Cu(II), Zn(II), Ca(II), Mn(II), Cr(III), Fe(III), Ba(II) and Al(III) caused little interference in the determination of these ions by inductively coupled plasma-atomic emission spectrometers (ICP-AES). The relative standard deviations for enrichment and determination of 50 ng ml⁻¹ Ga, In or Bi and 10 ng ml⁻¹ V or Ti are in the range 1.2–2.7%. The contents of these ions in real solution samples determined by this method were in agreement with the certified values of the samples with average errors <3.7%.     

Luminol-K2S2O8体系中金属离子化学发光行为的研究

报导了在自行设计的流动注射式化学发光分析仪上,对Luminal-K2S2O8体系中32种金属离子的化学发光行为的系统研究.确定了对金属离子的最优测定条件以及大多数金属离子的检出极限和线性范围.     

Sulfonylcalix[4]arenetetrasulfonate as pre-column chelating reagent for selective determination of aluminum(III), iron(III), and titanium(IV) by ion-pair reversed-phase high-performance liquid chromatography with spectrophotometric detection

Sulfonylcalix[4]arenetetrasulfonate (SO₂CAS) has been examined as a pre-column chelating reagent for ultratrace determination of metal ions by ion-pair reversed-phase high-performance liquid chromatography with spectrophotometric detection. Metal ions were converted into the SO₂CAS chelates in an acetic buffer solution (pH 4.7). The chelates were injected onto a n-octadecylsilanized silica-type Chromolith™ Performance RP-18e column and were eluted using a methanol (50 wt.%)-water eluent (pH 5.6) containing tetra-n-butylammonium bromide (7.0 mmol kg⁻¹), acetate buffer (5.0 mmol kg⁻¹), and disodium ethylendiamine-N,N,N′,N′-tetraacetate (0.10 mmol kg⁻¹). Under the conditions used, Al(III), Fe(III), and Ti(IV) were selectively detected among 21 kinds of metal ions [Al(III), Ba(II), Be(II), Ca(II), Cd(II), Co(II), Cr(III), Cu(II), Fe(III), Ga(III), Hf(IV), In(III), Mg(II), Mn(II), Mo(VI), Ni(II), Pb(II), Ti(IV), V(V), Zn(II), and Zr(IV)]. The detection limits on a 3σ blank basis were 8.8 nmol dm⁻³ (0.24 ng cm⁻³) for Al(III), 7.6 nmol dm⁻³ (0.42 ng cm⁻³) for Fe(III), and 17 nmol dm⁻³ (0.80 ng cm⁻³) for Ti(IV). The practical applicability of the proposed method was checked using river and tap water samples.     

Rapid and selective chelatometric titration of aluminium in non-ferrous alloys

A rapid chelatometric method for the determination of Al (4–20%) in magnesium, copper and chromium-aluminium-iron alloys is proposed. HEDTA is used as titrant and Zn solution as back-titrant, with hydrazidazol as indicator. Mn(II), Cu(II), Cd, Zn, Pb, Co(II), Ni, Hg(II), Fe(III), Bi, Cr(III), Sb(III), Ce(III), La, Sn(IV), Ti(IV), Zr and Mo(VI) do not interfere. High selectivity is achieved by a combination of group separation, masking and interference correction. The coefficient of variation varies from 0.2 to 1%.     

Inhibition of Electron-Hole Recombination in Substitutionally Doped Colloidal Semiconductor Crystallites

The subtitutional doping of 120-Å- sized TiO₂ Particles with Fe( III )ions has a profound effect on the charge carrier recombination time in this colloidal semiconductor. In undoped particles, the mean lifetime of an electronhole pair is ca. 30 ± 15 ns. Doping with 0.5% Fe( III ) drastically augments the charge-carrier lifetime which is extended to minutes or hours. The slow character of the recombination dynamics in Fe( III )-doped colloids was confirmed by laser photolysis using the characteristic optical of electrons in TiO₂ to monitor the time course of the reaction. EPR studies showed the Fe( III ) ions to enter the host lattice on Ti( IV ) sites, charge compensation taking place through the formation of oxygen vacancies. Valence-band holes produced under band-gap excitation react with these centers it the bulk forming Fe( IV ), the conduction band electrons being trapped by Ti( IV ) at the particle surface. Presumably, the spatial separation of the trapped electron and hole sites inhibits their recombination.     

Ti(IV) binds to human serum transferrin more tightly than does Fe(III)

The binding of titanium(IV) to human serum transferrin in 50 mM Tris with 20 mM bicarbonate and 10 mM citrate at pH 7.4 was studied by UV/vis kinetics and by isothermal titration calorimetry. Ti(IV) citrate, [Ti(C6H4O7)3]8-, employed in this study was previously characterized and delivers the metal to transferrin rapidly, allowing the quantification of the intrinsic binding constants for Ti(IV) to the C- and N-sites of transferrin. The results after correcting for blood plasma conditions (pH 7.4, [HCO3-] = 27 mM) reveal that Ti(IV) binds with greater affinity (log K = 26.8 and 25.7) than Fe(III) (log K = 22.5 and 21.4) to transferrin, a finding not previously observed for other examined metal ions. The strength of metal binding to transferrin correlates with the Lewis acidity of the metal. Ti(IV) is more Lewis acidic than Fe(III) and is nearly the same size. The study also reveals that Ti(IV) binds more tightly to one site than the other, and this difference is due to both entropic and enthalpic contributions. The study has implications for the role of transferrin in the anticancer activity of Ti(IV) drugs and the serum binding of Ti(IV) ions released from implants or imaging reagents.     

Spectroscopic approach in characterization of chromium(III), manganese(II), iron(III) and copper(II) complexes with a nitrogen donor tetradentate, 14-membered azamacrocyclic ligand

The complexes of Cr(III), Mn(II), Fe(III) and Cu(II) were synthesized with the macrocyclic ligand i.e. 2,3,9,10-tetraketo-1,4,8,11-tetraazacyclotetradecane. The ligand was prepared by the [2 + 2] condensation reaction of diethyloxalate and 1,3-diamino propane. These complexes were found to have the general composition M(L)X3 and M'(L)X2 [where M = Mn(II) and Cu(II), M' = Cr(III) and Fe(III), L = ligand (N4) and X = Cl-, NO3-, 1/2SO4(2-) and [CH3COO-]. The ligand and its transition metal complexes were characterized by the elemental analyses, molar conductance, magnetic susceptibility, mass, IR, electronic, and EPR spectral studies. On the basis of IR, electronic and EPR spectral studies an octahedral geometry has been assigned for Cr(III), Mn(II) and Fe(III) and a tetragonal geometry for Cu(II) complexes.