Cardiac troponin (cTn) is a specific and sensitive biomarker for diagnosis of myocardial injury. Hence, numerous kinds of biosensors for cTn have been reported. Electrochemical methods possess inherent advantages over other kinds of sensors because they are specific, sensitive, and simple. By combining the advantages of electrochemical biosensors with those of nanomaterials, some interesting electrochemical biosensor for cTn can be obtained where the nanomaterials trigger substantial signal amplification. This review (with 101 refs.) summarizes the state of the art in electrochemical biosensing of cTn based on the use of nanomaterials. Following an introduction into the field, the use of nanomaterials in electrochemical sensing is briefly discussed. A next section covers strategies for signal amplification by using nanomaterials, with subsections on the use of nanowires, nanotubes, graphenes, and various other nanoparticles. The article concludes with a discussion of the prospects of nanomaterial-based signal amplification and on future research directions.
Graphical abstract Illustration of electrochemical biosensing of cardiac troponin (cTn) with various kinds of nanomaterials, including nanowires, nanotubes, graphene and nanoparticles, as the signal amplification modules.
A method is described for the determination of the polarity of mixed organic solvents by using the fluorescent probe Hostasol Red (HR) desposited on the outer surface of nanosized zeolite L. Organic solvents and their mixtures can be roughly classified according to their polarity with bare eyes and fluorometrically. Emission peaks range from 520 to 640 nm. Some solvents act as quenchers. The method is studied with series of protic and nonprotic solvents, and with selected mixtures of organic solvents.
Graphical abstract The dye Hostalene Red adsorbed on nanosized zeolite shows strong fluorescence solvatochromism. This can be exploited to quickly assess the polarity of solvents and solvent mixtures.
MicroRNAs (miRNAs) are considered as being promising biomarkers for hematological malignancies, their aging, progression and prognosis. The authors have developed a method for the detection of miRNA-155 by using surface plasmon resonance (SPR) imaging coupled to a nucleic acid-based amplification strategy using gold nanoparticles (AuNPs). The target miRNA-155 is captured by surface-bound DNA probes. After hybridization, DNA-AuNP are employed for signal amplification via DNA sandwich assembly, resulting in a large increase in the SPR signal. This method can detect miRNA-155 in concentrations down to 45 pM and over dynamic that extends from 50 pM to 5 nM. The assay is highly specific and can discriminate even a single base mismatch. It also is reproducible, precise, and was successfully applied to the determination of miRNA-155 in spiked real samples where it gave recoveries in the range between 86% and 98%. This biosensor provides an alternative approach for miRNA detection in biomedical research and clinical diagnosis, which is highly effective and efficient.
Graphical abstract Schematic of a surface plasmon resonance imaging biosensor for detection of miRNA-155 using strand displacement amplification and gold nanoparticle.
The review (with 95 refs.) starts with an introduction that addresses the need for magnetic actuation in microfluidics. A second section describes the equations governing magnetic micromixing, with subsections on magnetic equations, fluid flow equations, and on convection–diffusion equations. The next section specifically covers magnetically actuated micromixers, with subsections on those actuated by external permanent magnets, by electromagnets, by microstirrers, and on micromixers with integrated electrodes. The conclusion summarizes the state of the art and addresses current challenges and trends.
Graphical abstract In this review, micromixers are classified into four types according to drive mode including external permanent magnet, electromagnet, microstirrer and the integrated electrode. The basic governing equations and operating rules of magnetic micromixers are given. The review is supposed to provide a helpful reference for those intending to study this field.
Conducting polymers possess good conductivity, can be easily modified, have a particular redox activity. Noble metal nanomaterials, in turn, possess high conductivity, catalytic properties and large surface-to-volume ratios. Synergistic materials consisting of both conducting polymer and metal nanomaterial therefore are most useful materials for use in electrochemical immunosensors with improved sensitivity and specificity. This review (with 75 references) gives an overview on advances in conducting polymer based noble metal nanomaterial hybrids for amperometric immunoassay of the 13 most common tumor markers. The review is divided into the following sections: (1) Polyaniline based noble metal nanomaterial hybrids; (2) Polyaniline derivative-based noble metal nanomaterial hybrids; (3) Polypyrrole-based noble metal nanomaterial hybrids. A final section covers future perspectives regarding challenges on the design of electrochemical immunoassays.
Graphical abstract Advances on conducting polymer and noble metal nanomaterial hybrids for amperometric immunoassay of tumor marker are reviewed. Future perspectives regarding challenges on the construction of electrochemical immunosensing interface for tumor marker are discussed.
The work describes a hybrid electrochemical sensor for highly sensitive detection of the anesthetic lidocaine (LID). Porous carbon (PC) was synthesized from an isoreticular metal-organic framework-8 (IRMOF-8) and drop cast onto a glassy carbon electrode (GCE). A layer of a molecularly imprinted polymer (MIP) layer was then fabricated in situ on the modified GCE by electro-polymerization, with LID acting as the template and resorcinol as the functional monomer. Hexacyanoferrate is used as an electrochemical probe. The electrical signal (typically acquired at 0.335 V vs. SCE) increases linearly in the 0.2 pM to 8 nM LID concentration range, with a remarkable 67 fM detection limit (at an S/N ratio of 3). The sensor is stable and selective. Eventually, rapid and accurate detection of LID in spiked real samples was successfully realized.
The authors have prepared a super-hydrophilic polymer consisting of a poly-polyhedral oligomeric silsesquioxane (POSS)-formaldehyde (PPF) composite. The polymerization process does not require a catalyst and results in a material with excellent hydrophilic properties and abundant functional groups. The PFF composite, even if not chemically modified, can selectively bind glycoproteins due to strong hydrophilic interactions. It is shown that glycoproteins can be selectively captured by the composite that has a binding capacity as large as 542 mg g?1 for the model protein ovalbumin. The PPF was applied to the selective capture and isolation of ovalbumin from complex biological samples.
Graphical abstract Super-hydrophilic poly-polyhedral oligomeric silsesquioxane formaldehyde (PPF) is prepared via a catalyst-free polymerization route. PPF exhibits high capturing and adsorption selectivity towards glycoproteins due to its strong hydrophilic interaction with glycan groups. Favorable capturing capacity is also achieved.
This review (with 121 references) gives a summary on recent advances in the use of nanomaterials for the optical determination of dopamine. It includes a brief overview of the clinical significance of dopamine followed by a discussion on the recent advances in various nanomaterial-based distinctive optical spectroscopic methods such as (a) colorimetry and spectrophotometry, (b) surface-enhanced Raman spectroscopy (SERS), (c) fluorescence spectrometry, and (d) electrochemiluminescence (ECL) spectrometry. All sections are further divided into subsections based on the type of nanomaterial used, and their advantages and disadvantages are discussed. A discussion on the validity of the nanomaterial-based optical detection of dopamine for human samples is also included. This review concludes with highlights of current challenges of nanomaterial-based optical sensors and an outlook on future perspectives.
Graphical abstract Schematic of the use of various nanomaterials in the detection of dopamine based on colorimetry, spectrophotometry, surface-enhanced Raman spectroscopy, fluorescence and electrochemiluminescence.
This review (with (318) refs) describes progress made in the design and synthesis of morphologically different metal oxide nanoparticles made from iron, manganese, titanium, copper, zinc, zirconium, cobalt, nickel, tungsten, silver, and vanadium. It also covers respective composites and their function and application in the field of electrochemical and photoelectrochemical sensing of chemical and biochemical species. The proper incorporation of chemical functionalities into these nanomaterials warrants effective detection of target molecules including DNA hybridization and sensing of DNA or the formation of antigen/antibody complexes. Significant data are summarized in tables. The review concludes with a discussion or current challenge and future perspectives.
The authors describe a fluorometric assay for microRNA. It is based on two-step amplification involving (a) strand displacement replication and (b) rolling circle amplification. The strand displacement amplification system is making use of template DNA (containing a sequence that is complementary to microRNA-21) and nicking enzyme sites. After hybridization, the microRNA strand becomes extended by DNA polymerase chain reaction and then cleaved by the nicking enzyme. The DNA thus produced acts as a primer in rolling circle amplification. Then, the DNA probe SYBR Green II is added to bind to ssDNA to generate a fluorescent signal which increases with increasing concentration of microRNA. The method has a wide detection range that covers the10 f. to 0.1 nM microRNA concentration range and has a detection limit as low as 1.0 fM. The method was successfully applied to the determination of microRNA-21 in the serum of healthy and breast cancer patients.
Graphical abstract Schematic of a fluorometric microRNA assay based on two-step amplification involving strand displacement replication and rolling circle amplification. DNA probe SYBR Green II is then bound to ssDNA to generate a fluorescent signal which increases with increasing concentration of microRNA.
The paper reports on a method for the detection of nanocellulose (NC) in consumer products by making use of a combination of (a) liquid-liquid extraction with an ionic liquid, and (b) size characterization by asymmetric flow field-flow fractionation (AF4) coupled to multi-angle light scattering (MALS) and refractive index (RI) detection. Both AF4 and MALS are viable tools for characterizing the size of the nanofibers. Sample preparation is easy, and the extraction efficiency of the method is 80.9 ± 1.8% (n = 5). It was applied to the detection of NC in toothpaste and coconut foodstuff to verify the practicability of the method.
Graphical abstract Nanocellulose (NC) monitoring from coconut products and toothpaste and its size characterization by liquid-liquid extraction and asymmetric flow field-flow fractionation equipped with multi-angle light scattering and refractive index detection (AF4-MALS-RI).
A battery of logic gates, “YES”, “AND” and “OR”, are constructed using magnetic beads (MBs) modified by DNA which consists of a substrate strand (S) and a signal strand on which the logic operates. Inputs stemming from micro-RNA (which represent three cancer biomarkers) take the place of signal DNA. The released signal strand self-assembles into the hemin-G-quadruplex complex (DNAzyme) that catalyzes a blue-green dye (ABTS+) from the precursor ABTS. This dye (quantified at a wavelength of 414 nm) represents the output signal for the various logic gates. The method allows quantitative detection of microRNA of three kinds of logic gates in the range of 5 nM–500 nM with detection limits of 3.8 nM, 4.9 nM, 5.4 nM. Boolean logic circuitry is also achieved following the principles of multilevel strand displacement. Based on strand displacement and magnetic separation, this work demonstrates the possibility of designing a logic system using micro-RNA in live cell lysate as inputs, and its potential application in DNA computation and cancer diagnosis.
Graphical abstract Schematic representation of a battery of logic gates and the Boolean logic circuitry based on strand displacement and magnetic separation responding to multiple microRNA in cancer cell lysate.
The authors report on a new approach for the determination of the breast cancer biomarker microRNA-155 (miRNA-155). It is based on the measurement of the fluorescence shift of oligonucleotide-templated copper nanoclusters (DNA-CuNC). A probe DNA was designed that acts as a template for the preparation of CuNC which, under 400 nm excitation, exhibit strong fluorescence enhancement at 490 nm and a 90 nm Stokes shift after binding to target miRNA-155 and formation of a DNA-RNA heteroduplex. Under the optimal conditions, the fluorescence of the DNA-CuNC increases with increasing concentration of miRNA-155 in the range from 50 pM to 10 nM, with a 11 pM detection limit. The assay has excellent selectivity over noncomplementary RNA. The method was applied to the determination of miRNA-155 in the presence of human plasma and saliva.
Graphical abstract Schematic of the detection strategy that relies on the fluorescence shift of DNA-CuNCs resulting from the specific binding of DNA-CuNCs with target miRNA-155. Fluorescence intensities are linearly proportional to the concentrations of target RNA from 50 pM to 10 nM.
Carbon polymer dots (CPDs) were prepared by a one-pot aqueous synthetic route from ascorbic acid and diethylenetriamine at room-temperature. The CPDs under 350-nm excitation exhibit blue fluorescence peaking at 430 nm with a quantum yield of 47%. Other features include an average diameter of 5 nm, a fluorescence that is independent of the excitation wavelength, good water dispersibility and photostability, and excellent biocompatibility. The CPDs are shown to be viable fluorescent probes for ferric ion which acts as a strong quencher. The response to Fe(III) is linear in the 0.2 to 10 μM concentration range, and the detection limit is 0.1 μM. The probe was applied to the determination of Fe(III) in environmental waters and to intracellular imaging of ferric ions in HeLa cells.
Graphical abstract Carbon polymer dots (CPDs) are prepared from ascorbic acid and diethylenetriamine (DETA) at room-temperature (RT). The RT-CPDs exhibit excellent optical performance, biocompatibility and selectivity of quenching by ferric ions. This can be applied for determination and intracellular imaging of ferric ion.
This paper describes a CdTe quantum dot-based fluorescence resonance energy transfer (FRET) based assay for the detection of the breast cancer biomarker microRNA. The method relies on energy transfer between DNA-templated silver nanoclusters (AgNCs) and CdTe QDs. Interaction between double strand oligonucleotide and QDs can be detected qualitatively through gel analysis and quantitatively by the signal amplification from AgNCs to QDs via FRET, best measured at an excitation wavelength of 350 nm and at emission wavelengths of 550 and 590 nm. Three microRNAs (microRNA-21, microRNA-155 and Let-7a) were quantified to verify the feasibility of the method, and a high sensitivity for microRNAs was achieved. Fluorescence intensity increases linearly with the log of the concentration of microRNA 155 in the 5.0 pM to 50 nM range, with a 1.2 pM detection limit.
Graphical abstract Schematic presentation of a quantum dot-based (QD-based) fluorescence resonance energy transfer technique for the detection of microRNA (miRNA). The method relies on energy transfer between DNA-templated silver nanoclusters (AgNCs) and QDs.
A metal-organic framework (MOF) was designed and prepared from luminescent Tb(III), adenosine diphosphate (ADP) and bipyridyl (Bipy). Its green fluorescence at 545 nm is shown to enable the fluorometric detection of cyanide ion based on the principle of π-conjugation-induced fluorescence enhancement. The fluorescence of the probe is strongly increased by cyanide due to extended π-conjugation between probe MOF and cyanide which sensitizes the fluorescence of Tb(III). This effect can be used to quantify cyanide at levels as low as 30 nM in aqueous solution. The method was applied to the determination of cyanide in saliva samples. The lack of interference by acetate and fluoride is a specific feature of this method. The method based on the principle of π-conjugation-induced fluorescence enhancement provides a new sensing way for widely used fluorescence assays.
Graphical abstract A cyanide-selective Tb-ADP-Bipy MOF was designed and synthesized for the detection of cyanide based on the principle of π-conjugation-induced fluorescence enhancement.
The authors describe an oligonucleotide-based lateral flow test for visual detection of Ag(I). The assay is based on cytosine-Ag(I)-cytosine [C-Ag(I)-C] coordination chemistry to capture gold nanoparticle (AuNP) tags in the test zone. A thiolated C-rich oligonucleotide probe was immobilized on the AuNPs via gold-thiol chemistry, and a biotinylated C-rich oligonucleotide probe was immobilized on the test zone. The AuNPs labelled with C-rich oligonucleotides are captured by Ag(I) ions in the test zone through the C-Ag(I)-C coordination. The resulting accumulation of AuNPs produces a readily visible red band in the test zone. Under optimized conditions, the test is capable of visually detecting 1.0 ppb of Ag(I) which is 50 times lower than the maximum allowable concentration as defined by the US Environmental Protection Agency for drinking water. Hence, the test is inexpensive and highly sensitive. It was applied to the detection of Ag(I) in spiked samples of tap water and river water. In our perception, the test is a particularly valuable tool in limited resource settings.
The authors describe four different kinds of sorbents for solid-phase extraction (SPE) and preconcentration of proteins from complex samples. All are based on the use of a poly(glycidyl-co-ethylene dimethacrylate) host monolith that was chemically functionalized by using two different ligands (ammonia and cysteamine). Gold nanoparticles (AuNPs) or silver NPs were then assembled to the amino or thiol groups. The resulting materials are shown to be viable stationary phases for use in SPE cartridges. The sorbents can selectively retain bovine serum albumin, and the thiol-modified sorbents containing AuNPs and AgNPs provide the highest recoveries (>90%) and satisfactory loading capacities (29.3 and 17.6 μg?mg?1 of sorbent, respectively). The applicability of these nanosorbents was demonstrated by preconcentrating viscotoxins from mistletoe extracts. The enriched fractions were subjected to MALDI-TOF analysis to underpin their selectivity.
Graphical abstract Hybrid materials based on methacrylate polymers modified with gold or silver nanoparticles were used as sorbents for solid phase extraction and preconcentration of bovine serum albumin and mistletoe viscotoxins, this followed by MALDI-TOF analysis.
The authors report on a robust method for the synthesis of gold nanorods (AuNRs) with tunable dimensions and longitudinal surface plasmon resonance. The method relies on seed-mediated particle growth in the presence of benzalkonium chloride (BAC) in place of the widely used surfactant cetyltrimethyl ammonium bromide (CTAB). Uniform AuNRs were obtained by particle growth in solution, and BAC is found to stabilize the AuNRs for >1 year. The SERS activity of the resulting AuNRs is essentially identical to that of CTAB-protected nanorods. The SERS activity of the BAC protected nanorods was applied to the quantitative analysis of potato virus X (PVX). The calibration plot for PVX is linear in the 10 to 750 ng?mL?1 concentration range, and the detection limit is 2.2 ng?mL?1.
Graphical abstract SERS-active gold nanorods (AuNRs) have been prepared by using benzalkonium chloride as stabilization agent. Effects of chemical parameters on AuNRs have been explored and AuNRs were used in quantitative analysis of potato virus X (PVX).
The authors describe a fluorescence based aptasensor for adenosine (AD), a conceivable biomarker for cancer. The assay is based on the immobilization of capture DNA on newly synthesized quaternary CuInZnS quantum dots (QDs) and the conjugation of probe DNA on gold nanoparticles (AuNPs). The capture DNA is an adenosine-specific aptamer that is partly complementary to the probe DNA. Once the capture aptamer hybridizes probe DNA, the fluorescence of the QDs (measured at excitation/emission wavelengths of 522/650 nm) is quenched by the AuNPs. However, when AD is added, it will bind to the aptamer and restrain the hybridization between capture DNA and probe DNA. Therefore, the fluorescence of the QDs will increase with increasing AD concentration. Under optimal conditions, fluorescence is linearly related to the AD concentration in the range from 50 to 400 μM, the detection limit being 1.1 μM. This assay is sensitive, selective, reproducible and acceptably stable. It was applied to the determination of AD in spiked human serum samples where it gave satisfactory results.
