核-壳结构TiO_2@Pt复合纳米颗粒修饰的葡萄糖生物传感器

制备了核-壳结构的TiO2@Pt复合纳米颗粒,并修饰于恒电位沉积的普鲁士蓝-壳聚糖(PB-CS)杂化膜表面,以固定葡萄糖氧化酶。由于TiO2@Pt复合纳米颗粒的引入显著增大了传感器的导电性和酶的固载量,同时CS的掺杂,防止了PB的泄露,使得传感器对葡萄糖具有较好的催化作用。该传感器在1.2×10-6~1.1×10-3mol·L-1范围内,响应电流与葡萄糖浓度呈良好的线性,相关系数(r)为0.998 6,检出限(S/N=3)达到4.0×10-7mol·L-1,灵敏度为13.31 mA·mol·L-1·cm-2。对0.3 mmol·L-1的葡萄糖标准溶液连续检测5次,其相对标准偏差为3.8%。     

HRP-纳米金/纳米硫化镉/聚天青Ⅰ修饰玻碳电极的制备及用作过氧化氢生物传感器

以玻碳电极为基底,电聚合一层表面均匀的带正电性的聚天青Ⅰ膜,再通过静电作用吸附一层带负电性的具有大比表面积的纳米硫化镉来固定纳米金和辣根过氧化物酶(HRP)的复合物,制备出性能良好的过氧化氢生物传感器.采用循环伏安法(CV)和计时电流法对该生物传感器的性能进行了研究.试验表明:该方法不仅增加了酶的吸附量,还有效保持了酶的生物催化活性,此生物传感器对过氧化氢浓度在4.0×10-7～1.2×10-3mol·L-1范围内呈线性关系,检出限为1.4×10-7mol·L-1.     

基于石墨烯/DNA/纳米金的无酶葡萄糖传感器研究

本文利用电解剥离法制得石墨烯/DNA复合材料,通过化学还原法将纳米金颗粒固定在石墨烯/DNA复合材料表面制得石墨烯/DNA/纳米金(Gr/DNA/GNPs)复合材料,最终构建了一种基于Gr/DNA/GNPs修饰电极的无酶葡萄糖生物传感器。通过循环伏安法考察了不同修饰电极在碱性葡萄糖溶液中的电化学行为,并探讨了溶液中OH-离子强度、扫描电位范围及Gr/DNA/GNPs修饰量对传感器响应特性的影响。在优化实验条件下,采用循环伏安法检测葡萄糖的线性范围为8.0×10-5~5.0×10-2mol·L-1,检出限为1.2×10-5mol·L-1(S/N=3)。对2.0×10-3mol·L-1的葡萄糖平行测定5次,其相对标准偏差为3.2%。实验结果表明该传感器具有较高的灵敏度、较好的重现性、稳定性及抗干扰能力。本方法可成功用于人血清样品中葡萄糖含量的测定,回收率为97.4%~102.8%。     

基于Nafion/碳纳米粒子修饰的葡萄糖传感器

采用滴涂法制备了Nafion/碳纳米粒子复合物修饰玻碳电极,该电极对H2O2具有良好的电催化氧化性能。还利用滴涂法制备了Nafion/碳纳米粒子复合物包裹的葡萄糖酶电化学生物传感器,该生物传感器对葡萄糖有着良好的电催化作用。应用该传感器对葡萄糖进行了检测,检测线性范围为2.0×10-6～6.0×10-3mol/L,检出限为1.6×10-6mol/L(S/N=3),实验结果表明该传感器具有良好的稳定性、重现性和抗干扰能力。对小鼠血清样品中的葡萄糖进行检测,结果令人满意。     

基于新型二氧化锰-碳纳米管复合材料的高灵敏过氧化氢传感器

本文以多壁碳纳米管(MWCNTs)和KMnO4为原料,通过直接氧化还原反应合成了一种新型MnO2-C纳米复合材料,将其滴涂在玻碳(GC)电极表面,成功制备出一种非酶型H2O2传感器。采用循环伏安法和计时电流法研究了该传感器对H2O2的电催化氧化行为。实验结果表明,与GC电极和MWCNTs修饰电极相比,该电极对H2O2氧化显示出更好的催化活性。实验对影响电极性能的各种参数,包括pH值、工作电位及MnO2-C修饰量进行了探讨。在最佳实验条件下,传感器对H2O2响应的线性范围为5.0×10-7～0.2mol·L-1,检测限(S/N=3)为1.4×10-7 mol·L-1。该传感器选材新颖,制备方法简单,重现性好,稳定性和抗干扰能力强。     

基于立方体纳米氧化亚铜修饰的安培型葡萄糖生物传感器的制备及性能研究

将合成的立方体纳米氧化亚铜用于修饰玻碳电极,在其上固定葡萄糖氧化酶,构建了高灵敏的安培型葡萄糖生物传感器.采用X射线衍射(X RD)、扫描电镜(SEM)对合成的立方体纳米氧化亚铜及其修饰电极进行了表征.结果表明,合成的纳米氧化亚铜为均匀的立方体形状.采用循环伏安法(CV)、交流阻抗谱(EIS)、差分脉冲伏安法(DPV)及计时电流法(CA)考察了修饰电极的电化学行为.在含0.1 mmol/L葡萄糖的磷酸盐缓冲溶液(pH 7.4)中研究了立方体纳米氧化亚铜修饰电极的循环伏安(CV)响应,实验结果表明,此修饰电极对葡萄糖显示出良好的电催化性能.DPV响应电流与葡萄糖的浓度在5.0×10-6 ～4.0× 10-3mol/L范围内呈良好的线性关系,线性相关系数R2=0.9983,检出限为6.8×10-7 mol/L(S/N=3).CA实验结果表明,尿酸、抗坏血酸、D-果糖对传感器不产生干扰.本传感器具有较好的重现性和稳定性,可用于实际样品中葡萄糖的检测.     

基于Hemin/多壁碳纳米管纳米复合物构建的过氧化氢生物传感器的研究

利用卟啉(Hemin)具有模拟酶的功能,与多壁碳纳米管(MWCNTs)构建了一种新型的过氧化氢(H2O2)生物传感器。首先,利用Hemin与MWCNTs之间的π-π键作用,在超声分散下制备Hemin/MWCNTs纳米复合物;采用滴涂技术并在nafion的作用下将其固载在电极表面,制得该H2O2生物传感器(nafion/Hemin/MWCNTs/GCE)。采用紫外-可见分光光度法(UV-Vis)对合成的纳米复合物进行了分析;采用扫描电镜(SEM)对电极的表面形貌进行了表征;采用循环伏安法和计时电流法考察了该修饰电极的电化学行为;并对传感器的行为进行了详细的研究。在最优条件下,此修饰电极对H2O2具有明显的催化作用,电流与H2O2的浓度在6.0×10-7¹.8×10-3 mol/L范围内呈现良好的线性关系,检出限达2.0×10-7 mol/L。此传感器制作简单,具有较高的灵敏度和良好的稳定性及重现性。     

基于Hemin/多壁碳纳米管纳米复合物构建的过氧化氢生物传感器的研究

利用卟啉(Hemin)具有模拟酶的功能,与多壁碳纳米管(MWCNTs)构建了一种新型的过氧化氢(H2O2)生物传感器。首先,利用Hemin与MWCNTs之间的π-π键作用,在超声分散下制备Hemin/MWCNTs纳米复合物;采用滴涂技术并在nafion的作用下将其固载在电极表面,制得该H2O2生物传感器(nafion/Hemin/MWCNTs/GCE)。采用紫外-可见分光光度法(UV-Vis)对合成的纳米复合物进行了分析;采用扫描电镜(SEM)对电极的表面形貌进行了表征;采用循环伏安法和计时电流法考察了该修饰电极的电化学行为;并对传感器的行为进行了详细的研究。在最优条件下,此修饰电极对H2O2具有明显的催化作用,电流与H2O2的浓度在6.0×10-7~1.8×10-3 mol/L范围内呈现良好的线性关系,检出限达2.0×10-7 mol/L。此传感器制作简单,具有较高的灵敏度和良好的稳定性及重现性。     

聚中性红修饰玻碳电极葡萄糖生物传感器

以中性红为电子媒介体,电聚合于Nafion修饰的玻碳电极表面,以戊二醛作交联剂固定葡萄糖氧化酶,最后覆盖一层Nafion膜防止酶流失,构建一种新型葡萄糖生物传感器.详细探讨了传感器的电化学性能及对葡萄糖的最佳响应条件.结果表明,30℃时,传感器在pH 7.0的PBS中对葡萄糖的线性响应范围为1.0×10-5~5.0×10-3mol.L-1.该传感器制作简单、性能优良,有潜在应用前景.     

基于纳米MnO2-MWCNTs复合材料修饰的葡萄糖传感器

采用水热法制备了纳米MnO2,并用红外光谱,X射线衍射(XRD)和扫描电子显微镜(SEM)对其进行了表征。将碳纳米管和纳米MnO2分散在壳聚糖溶液中,用滴涂法固定到玻碳电极表面,制成修饰电极。利用计时电流法对该葡萄糖传感器的性能进行了研究,纳米MnO2-MWCNTs复合物对葡萄糖的氧化有明显的催化作用。在优化的条件下,葡萄糖在5.0×10-5～3.0×10-2mol/L浓度范围内,计时电流与浓度之间呈线性关系,检出限为1.5×10-5 mol/L(S/N=3)。对1.0×10-3 mol/L葡萄糖溶液平行测定8次的相对标准偏差(RSD)为2.1%。该传感器可成功用于葡萄糖注射液中葡萄糖的测定,回收率在96.4%～98.6%之间。     

二茂铁衍生物电子传递剂键合的溶胶-凝胶葡萄糖生物传感器

The sol-gel derived glucose biosensor was developed, and the sol-gel membrane was organically modified by N-（3-triethoxysilylpropyl）-ferrocenylmethylamine （FcSi） as sol-gel precursor to make electrochemical biosensor. The structure of biosensor was sol-gel/FcSi＋GOx/GC type （glucose oxidase, GOx）. The ferrocene mediator was chemically immobilized to the silane network, and GOx was entrapped to the sol-gel glass network. Therefore, these structures prevented mediator leakage and retained the enzyme activity. Additionally, pH of electrolyte, temperature effects, and interference of positive substances with biosensor were investigated. And the electrochemical performance of biosensor was studied by amperometry. The results indicated that the linear range, detection limit. and response slope of biosensor was 2.00×10^-4-1.57×10^-3 mol·L^-1, 2.0×10^-4 mol·L^-1 and 5.06×10^5 nA·mol^- 1·L, respectively.     

一种基于壳聚糖固定葡萄糖氧化酶的葡萄糖生物传感器的研究

本文选用生物相容性好的壳聚糖作为基体材料，使其与戊二醛交联成网状结构包埋葡萄糖氧化酶制成电化学传感器。这种壳聚糖膜不仅可以减小葡萄糖氧化酶的流失，而且能为酶提供了适宜的微环境。用红外光谱、紫外光谱及透射电镜对膜的形态和性质进行了表征。实验结果表明该传感器具有很快的响应速度，很好的稳定性和重现性，能选择性地催化葡萄糖并测定其浓度。该传感器的制备方法简单，成本低，于冰箱中放置两周信号保持在90％以上，对葡萄糖测量的线性范围为1×10^-5 - 3.4×10^-3mol•L^-1，当信噪比为3:1时检测限为5×10^-6mol•L^-1。     

Determination of Catechol by a Laccase Biosensor Based on Silica-Modified Zirconia Nanoparticles

A promising nanotechnological material, zirconia nanoparticles modified with SiO₂, was used as a medium for the immobilization of laccase to construct a novel biosensor that exhibits sensitive amperometric response to catechol in 0.1 mol · L^?1 phosphate buffer (pH 6.0) using cyclic voltammetry. The linear response to catechol was from 1.0 × 10^?6 to 1.0 × 10^?4 mol · L^?1 and the detection limit was 3.5 × 10^?7 mol · L^?1 at a signal-to-noise ratio of 3. The biosensor exhibited good stability, precision, and few interferences.     

花状氧化锌纳米晶的制备及其电化学传感研究

本文以丙三醇为反应溶剂,在氧氧化钾体系中制备了两种花状氧化锌纳米晶.讨论了不同实验条件对氧化锌纳米晶形成影响,通过改变氢氧化钾浓度、反应温度和体系中水含量等条件来调节材料形貌.探讨了花状氧化锌纳米晶可能的形成过程.用X射线粉末衍射、扫描电子显微镜、紫外可见光谱等分析技术对制备的氧化锌纳米晶进行了表征.结果表明两种花状纳...     

Application of polypyrrole/GOx film to glucose biosensor based on electrochemical-surface plasmon resonance technique

A surface plasmon resonance (SPR) based biosensor for glucose is presented in which a thin gold film modified with polypyrrole and glucose oxidase (PPy-GOx) acts as the sensor chip. It is based on SPR response to the change of refractive index of PPy-GOx film by the enzymatic catalytic reaction. The co-electropolymerization of pyrrole and GOx was carried out under cyclic voltammetric conditions, and simultaneously monitored by in-situ SPR. It has been revealed that the enzymatic reaction between GOx and PPy in the presence of glucose can lead to distinct changes in the SPR signal. From the experiments, a linear relationship was obtained in the range 1–100 μmol L^?1 between glucose concentration and the rate of redox transformation of PPy. The detection limit was 0.5 μmol L^?1 (S/N?=?3) and recoveries were 95.2–102.7%.     

A New Amperometric Biosensor Based on HRP/Nano-Au/L-Cysteine/Poly（o-Aminobenzoic acid）-Membrane-Modified Platinum Electrode for the Determination of Hydrogen Peroxide

The third generation amperometric biosensor for the determination of hydrogen peroxide （H2O2） has been described. For the fabrication of biosensor, o-aminobenzoic acid （oABA） was first electropolymerized on the surface of platinum （Pt） electrode as an electrostatic repulsion layer to reject interferences. Horseradish peroxidase （HRP） absorbed by nano-scaled particulate gold （nano-Au） was immobilized on the electrode modified with polymerized o-aminobenzoic acid （poABA） with L-cysteine as a linker to prepare a biosensor for the detection of H2O2. Amperometric detection of H2O2 was realized at a potential of ＋20 mV versus SCE. The resulting biosensor exhibited fast response, excellent reproducibility and sensibility, expanded linear range and low interferences. Temperature and pH dependence and stability of the sensor were investigated. The optimal sensor gave a linear response in the range of 2.99×10^-6 to 3.55×10^-3 mol·L^-1 to H2O2 with a sensibility of 0.0177 A·L^-1·mol^-1 and a detection limit （S/N = 3） of 4.3×10^-7 mol·L^-1. The biosensor demonstrated a 95% response within less than 10 s.     

银-磷酸钛纳米复合膜的构建及其电化学生物传感

利用ITO基底上层层组装构建的多层内嵌银纳米粒子的磷酸钛薄膜固定了血红蛋白并且用于生物传感研究。由于银纳米粒子与磷酸钛膜的协同作用,实验中可以观察到Hb的直接电子传递。研究表明所制备的Hb-Ag-TiP/PDDA/ITO电极对H₂O₂响应迅速、稳定,检测限达3.3×10^-6 mol·L^-1。     

Development of an amperometric glucose biosensor based on the immobilization of glucose oxidase in an ormosil-PVA matrix onto a Prussian Blue modified electrode

An amperometric glucose biosensor was developed based on the immobilization of glucose oxidase in the organically modified silicate (ormosil)-polyvinyl acetate (PVA) matrix onto a Prussian Blue (PB)-modified glassy carbon electrode. A higher stability PB-modified electrode was prepared by the electrochemical deposition of FeCl₃, K₃[Fe(CN)₆] and ethylenediamine tetraacetic acid (EDTA) under cyclic voltammetric (CV) conditions. The effects of the potential range of CV conditions, electrolyte cations, applied potential, pH, temperature and co-existing substances were investigated. The detection limit of the glucose biosensor was 8.1 μmol·L⁻¹ (S/N = 3) with a linear range from 20 μmol·L⁻¹ to 2 mmol·L⁻¹ (R = 0.9965). The biosensor presented a fast response and good selectivity. Additionally, excellent reproducibility and stability of the biosensor were observed. Supported by the National High Technical Development Project (863 project) Foundation (Grant No. 2006AA09Z160) and the National Natural Science Foundation of China (Grant No. 20775064)     

An H2O2 Biosensor Based on Immobilization of Horseradish Peroxidase Labeled Nano‐Au in Silica Sol‐Gel/Alginate Composite Film

Abstract

A novel approach to assemble an H₂O₂ amperometric biosensor was introduced. The biosensor was constructed by entrapping horseradish peroxidase (HRP) labeled nano‐scaled particulate gold (nano‐Au) (HRP‐nano‐Au electrostatic composite) in a new silica sol‐gel/alginate hybrid film using glassy carbon electrode as based electrode. This suggested strategy fully merged the merits of sol‐gel derived inorganic‐organic composite film and the nano‐Au intermediator. The silica sol‐gel/alginate hybrid material can improve the properties of conventional sol‐gel material and effectively prevent cracking of film. The entrapment of HRP in the form of HRP‐nano‐Au can not only factually prevent the leaking of enzyme out of the film but also provide a favorable microenvironment for HRP. With hydroquinone as an electron mediator, the proposed HRP electrode exhibited good catalytic activity for the reduction of H₂O₂. The parameters affecting both the qualities of sol‐gel/alginate hybrid film and the biosensor response were optimized. The biosensor exhibited high sensitivity of 0.40 Al mol^?1 cm^?2 for H₂O₂ over a wide linear range of concentration from 1.22×10^?5 to 1.46×10^?3 mol L^?1, rapid response of <5 s and a detection limit of 0.61×10^?6 mol L^?1. The enzyme electrode has remarkable stability and retained 86% of its initial activity after 45 days of storage in 0.1 mol L^?1 Tris‐HCl buffer solutions at pH 7.     

Simultaneous Detection of Dopamine and Uric Acid under Coexistence of Ascorbic Acid with DNA/Pt Nanocluster Modified Electrode

A novel biosensor by electrochemically codeposited Pt nanoclusters and DNA film was constructed and applied to detection of dopamine (DA) and uric acid (UA) in the presence of high concentration ascorbic acid (AA). Scanning electron microscopy and X‐ray photoelectron spectroscopy were used for characterization. This electrode was successfully used to resolve the overlapping voltammetric response of DA, UA and AA into three well‐defined peaks with a large anodic peak difference (ΔE_pa) of about 184 mV for DA and 324 mV for UA. The catalytic peak current obtained from differential pulse voltammetry was linearly dependent on the DA concentration from 1.1× 10^?7 to 3.8×10^?5 mol·L^?1 with a detection limit of 3.6×10^?8 mol·L^?1 (S/N=3) and on the UA concentration from 3.0×10^?7 to 5.7×10^?5 mol·L^?1 with a detection limit of 1.0×10^?7 mol·L^?1 with coexistence of 1.0×10^?3 mol·L^?1 AA. The modified electrode shows good sensitivity and selectivity.