Supercritical fluid chromatography and two-dimensional supercritical fluid chromatography of polar car lubricant additives with neat CO(2) as mobile phase

Car lubricant additives are added to mineral or synthetic base stocks to improve viscosity and resistance to oxidation of the lubricant and to limit wear of engines. Their total amount in the commercial lubricant varies from a few percents to 20-25%. As they belong to various chemical classes and are added to a very complex medium, the base stock, their detailed chromatographic analysis is very difficult and time consuming as it should involve sample treatment and preparative scale separations in order to simplify the sample. The aim of this work is to determine the feasibility of the separation of low molecular weight lubricant additives using various packed columns with pure CO(2) as a mobile phase to enable implementation of flame ionisation detection as universal detector. This is part of a hypernated system including more sophisticated specific detectors, such as AED, FTIR or MS to obtain detailed structural information of compounds. This paper is devoted to the comparison of some stationary phases supposed to provide hydrocarbon group type separation (silica and normal phase) or separations on alkyl-bonded silica in non-aqueous mode of some selected classes of additives in test mixtures or in base stocks. Adsorption chromatography allows partial separation of additives from the base stocks while the direct elution of test additives can only be obtained on reversed phase supports having a very efficient silanol group protection so the interaction of the more polar compounds is much reduced. A two-dimensional scheme of analysis is also described. It combines adsorption chromatography to separate most of the polar additives from the base stock and alkyl-bonded silica for more detailed separation of the additives. However, overlapping between groups of compounds and the lack of resolution between some additives and the base stock should be addressed by the implementing of selective detectors.     

Ionisation in the absence of high voltage using supercritical fluid chromatography: a possible route to increased signal

Supercritical fluid chromatography (SFC) is fast becoming a technique of choice for the analysis of a wide range of compounds and has been found to be complementary to high-performance liquid chromatography (HPLC). The combination of SFC and mass spectrometry (MS) affords a very useful tool in the separation and analysis of compounds. In this study the ionisation of samples in the absence of an applied electrospray voltage has been observed when using SFC/MS, with some compounds showing increased sensitivity when all ionisation source high voltage (HV) is removed. In an attempt to understand the mechanism of ionisation, a series of test compounds were analysed using standard electrospray ionisation (ESI) and atmospheric pressure chemical ionisation (APCI) source configurations and also different API source designs. In both cases, data were acquired with the applied high voltage on (normal conditions) or with the high voltage off, i.e. no voltage spray (novo-spray). The standards were analysed with a range of pressure and modifier percentage conditions. To understand the nature of the ionisation process observed, this was compared with three established liquid-to-gas ionisation mechanisms. These were thermospray (TSP), charge residue model (CRM) of ESI and sonic spray ionisation (SSI). Experiments were undertaken in an attempt to explain this ionisation phenomenon and quantify any observed change in sensitivity. The most important point to note is that enhanced ionisation was observed under novo-spray conditions in a SFC/MS configuration, which in certain cases provides a lowering in the overall limit of detection (LOD).     

Rapid analysis of lubricants by atmospheric solid analysis probe–ion mobility mass spectrometry

Formulated lubricants are complex mixtures composed of base oil(s) and additives with various functions (detergents, corrosion inhibiter, antioxidant, viscosity modifiers, etc.). Because of the aliphatic nature of base oil and the chemical diversity of additives, the characterization of lubricant is currently a long and complex process. The comprehensive analysis of lubricant samples involves several techniques such as nuclear magnetic resonance, mass spectrometry, chromatography and infrared spectroscopy. The coupling of atmospheric solid analysis probe (ASAP) with ion mobility‐mass spectrometry (IM‐MS) has been shown to be an efficient tool for the characterization of complex mixture containing vaporizable polar to non‐polar compounds. This approach affords the coupling of a direct ionization technique that does not require sample preparation, with a bi‐dimensional separation method with high peak capacity. In this work, we show that ASAP‐IM‐MS is a suitable method for rapid and direct characterization of lubricant samples. Indeed, base oil and additives yielded, by ASAP, ions series which could be separated by IM‐MS. Molecular additives such as Zn‐dithiocarbamate, phosphite, thiophosphate and Alkyl diphenylamine were ionized as molecular ions [M]^+? or protonated molecules [M + H]⁺, depending of their polarity. In some cases, fragment ions were observed, confirming the additive identification. In addition, high molecular weight polymeric additives such as poly(alkyl methacrylate) (PAM) were pyrolized in the ASAP source leading to characteristic fragment ions. ASAP‐IM‐MS is shown to be a powerful tool for studying complex mixtures, allowing the first comprehensive analysis of lubricants in just a few minutes. Copyright © 2014 John Wiley & Sons, Ltd.     

Supercritical fluid chromatography coupled to mass spectrometry for lipidomics

Supercritical fluid chromatography (SFC) has experienced a particular revival in recent years thanks to the development of robust and efficient commercial systems. Because of its physico‐chemical properties, supercritical carbon dioxide (CO₂) mixed with cosolvents and additives is particularly suitable for SFC to allow the elution of compounds of different polarities and more particularly complex lipids. Hyphenation with mass spectrometry (MS) is increasingly described in the literature but still requires many further developments in order to be as user‐friendly as coupling with liquid chromatography. The basic concepts of SFC and MS hyphenation will be first considered. Then a representative example of method development in lipidomics will be introduced. In conclusion, the challenges and future needs in this field of research will be discussed.     

Analysis of iso-alpha-acids and reduced iso-alpha-acids in beer by direct injection and liquid chromatography with ultraviolet absorbance detection or with mass spectrometry

A liquid chromatography (LC) method is described for the simultaneous analysis of iso-alpha-acids and reduced iso-alpha-acids in beer. Volatile mobile phase additives were selected to enable hyphenation to mass spectrometric (MS) operated in the atmospheric pressure chemical ionization (APCI) mode. Contrary to other recent LC optimization procedures for the same compounds, an alkaline pH was selected hereby improving peak shape and selectivity. Both UV and MS detection are sensitive enough to analyze beers without sample pre-concentration. All major bitter acids are separated within 65 min with exception of cis-dihydroisoadhumulone, which co-elutes with trans-isocohumulone. Due to the selectivity of the MS, these compounds could be differentiated according to their m/z value. The performance in terms of quantification of bitter acids by LC-UV and LC-MS are compared for standard solutions and a selection of 14 beers.     

Functionalization of multiwalled carbon nanotube via surface reversible addition fragmentation chain transfer polymerization and as lubricant additives

Polymer‐grafted multiwalled carbon nanotube (MWCNT) hybrid composite which possess a hard backbone of MWCNT and a soft shell of brush‐like polystyrene (PSt) were synthesized. The reversible addition fragmentation chain transfer (RAFT) agents were successfully immobilized onto the surface of MWCNT first, and PSt chains were subsequently grafted from sidewall of MWCNT via RAFT polymerization. Chemical structure of resulting product and the quantities of grafted polymer were determined by Fourier transform infrared, thermal gravimetric analysis, nuclear magnetic resonance, and X‐ray photoelectron spectra. Transmission electron microscopy and field emission scanning electron microscopy images clearly indicate that the nanotubes were coated with a polymer layer. Furthermore, the functionalized MWCNT as additives was added to base lubricant and the tribological property of resultant MWCNT lubricant was investigated with four‐ball machines. The results indicate that the functionalization led to an improvement in the dispersion of MWCNT and as additives it amended the tribological property of base lubricant. The mechanism of the significant improvements on the tribological properties of the functionalized MWCNT as additives was discussed. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3014–3023, 2008     

高效液相色谱/大气压化学电离质谱分析新型复合抗氧剂

 应用高效液相色谱 /大气压化学电离质谱技术 ,其中包括直接进样技术、同时正负离子扫描方式、可编程的源内碰撞诱导解离 (CID)技术 ,以及红外光谱分析技术 ,对一种用于润滑油的新型复合抗氧剂进行了分离分析 ,并对其中的有效组分进行了定性鉴定。该方法简便、快速、可靠。     

Investigation of antioxidants and UV stabilizers from plastics. Part I: Comparison of HPLC and SFC; preliminary SFC/MS study

Synthetic mixtures of additives (antioxidants, UV stabilizers) used in the manufacture of food packaging materials were separated by normal phase HPLC under isocratic or gradient elution, and by capillary SFC using CO₂ as mobile phase. SFC proved to be more efficient for the separation and determination of additives with a wide range of boiling points and for substances lacking a UV chromophoric moiety. Combined SFC/MS, using a direct coupling interface, produced clear charge transfer spectra resembling EI spectra and proton exchange CI spectra when ammonia was added to the ion source.     

Modern analytical supercritical fluid chromatography using columns packed with sub-2 μm particles: A tutorial

This tutorial provides an overview of the possibilities, limitations and analytical conditions of modern analytical supercritical fluid chromatography (SFC) using columns packed with sub-2 μm particles. In particular, it gives a detailed overview of commercially available modern SFC instrumentation and the detectors that can be employed (UV, MS, ELSD, FID, etc.). Some advice on the choice of the stationary phase dimensions and chemistries, the nature of the mobile phase (choice of organic modifier and additives) and its flow rate as well as the backpressure and temperature are also provided. Finally, several groups of potentially problematic compounds, including lipophilic compounds, hydrophilic substances and basic drugs, are discussed in detail. All these families of analytes can be resolved with SFC but require specific analytical conditions.     

硼酸盐润滑油添加剂的研究现状和进展

综述了国内外硼酸盐润滑油添加剂的研究现状,介绍了针对其合成和作用机制研究的进展,并对其前景进行了展望.指出硼酸盐已成为近年来绿色润滑油添加剂研究领域的热点之一,有机硼酸盐润滑油添加剂克服了无机硼酸盐分散稳定性差的弱点,代表了综合性能优良的硼酸盐润滑油添加剂的发展方向.     

The analysis of beta-agonists by packed-column supercritical fluid chromatography with ultra-violet and atmospheric pressure chemical ionisation mass spectrometric detection

Packed-column supercritical fluid chromatography (pSFC) using ultra-violet (UV) and atmospheric pressure chemical ionisation (APCI) mass spectrometry (MS) provides a versatile method for the identification and quantification of beta-agonists. We have achieved good separation of clenbuterol, salbutamol, terbutaline and fenoterol with good resolution and reasonable retention times using a high concentration of methanol modifier in the supercritical CO2, together with small amounts of both acidic (trifluoroacetic acid, TFAA) and basic (triethylamine, TEA, or diethylamine, DEA) additives. APCI-MS gave unambiguous identification of the 4 analytes, and increasing cone voltage provided informative fragmentation patterns. The pSFC-MS technique was shown to be linear (R2 > or = 0.996) over the concentration range 1-50 micrograms ml-1. Single ion monitoring (SIM) gave detection limits (on-column) of 2.5 ng (clenbuterol), 0.83 ng (terbutaline), 7.6 ng (salbutamol) and 2.7 ng (fenoterol). The pSFC-MS system was shown to be reproducible within a day, between days, and between restrictors. Analysis of milk samples 'spiked' with beta-agonists showed that the matrix caused no interference, with detection limits of approximately 500 micrograms l-1 of beta-agonists. More dilute solutions could be analysed by pre-concentration before the SFC stage.     

Analysis of anthraquinones in Rubia tinctorum L. by liquid chromatography coupled with diode-array UV and mass spectrometric detection

A liquid chromatographic (LC) method for the separation of both anthraquinone glycosides and aglycones in extracts of Rubia tinctorum was improved. For on-line MS detection atmospheric pressure chemical ionisation as well as electrospray ionisation (ESI) were used. The glycosides were ionised in both positive and negative ionisation (NI) mode, the aglycones only in the NI mode. With ESI ammonia was added to the eluent post-column to deprotonate the compounds. The efficiency of mass detection of the hydroxyanthraquinone aglycones was found to depend on the pKa value of the component. LC-diode-array detection and LC-MS provide useful complementary information for the identification of anthraquinones in plant extracts, which was proven with the identification of munjistin and pseudopurpurin.     

Rapid and high resolution capillary supercritical fluid chromatography (SFC) and SFC/MS of trichothecene mycotoxins

The potential application of capillary column supercritical fluid chromatography (SFC) and SFC/mass spectrometry (SFC/MS) for the separation and analysis of mycotoxins of the trichothecene group was examined. Trichothecenes present significant analytical problems for both gas and liquid chromatography with a major difficulty for the latter being the lack of sufficiently sensitive and selective detectors. Supercritical carbon dioxide mobile phases at temperatures up to 100 degrees C were used with deactivated fused silica columns coated with crosslinked stationary phases. Separations were obtained under pressure ramped conditions using long (15 m) 50-micron i.d. columns for several trichothecenes (diacetoxyscirpenol, deoxynivalenol, and T-2 toxin) and related higher molecular weight macrocyclic (roridin and verrucarin) trichothecenes. In addition, new rapid pressure programming techniques with short (less than 2m) 25- to 50-micron i.d. capillary columns were used to obtain fast separations in as little as 1 min. SFC/MS with ammonia chemical ionization provided high selectivity and sensitive detection (with approximately 1-pg detection limits) for trichothecene mixtures. The extension to complex sample matrices is discussed and the application of selective MS/MS detection is demonstrated.     

二烷基二硫代磷酸锌的大气压化学电离质谱

采用大气压化学电离质谱技术（APCI－MS）对润滑油抗氧抗腐蚀添加剂丁基、辛基混合烷基硫代磷酸锌进行了分析，并结合APCI－MS技术中特有的源内化学电离检测（CID）功能对二辛基二硫代磷酸锌进行了结构表征；该法简便、快速，与传统方法相比有优越之处。     

A novel approach for sensitivity enhancement in atmospheric pressure chemical ionisation liquid chromatography/mass spectrometry of chlorophylls

Differences in the ionisation efficiency of chlorophylls and their phaeophytin counterparts result in lower sensitivity for atmospheric pressure chemical ionisation mass spectrometric detection of the former. Improvement in the sensitivity of detection of chlorophyll of around an order of magnitude at a concentration of 1 x 10(-6)mol L(-1) has been achieved using post-column addition of methanoic acid during analysis by liquid chromatography/mass spectrometry (LC/MS). The method gives linear response and is a simple strategy to improve sensitivity both for LC/MS and LC/MS/MS without loss of information relating to the precise nature of the tetrapyrrole distributions. Detection levels achieved exceed those obtained by absorbance detection.     

Signal suppression/enhancement in high-performance liquid chromatography tandem mass spectrometry

The review discusses the pitfalls of the matrix effect in mass spectrometry detection hyphenated to liquid chromatography separation. Matrix effect heavily influences both qualitative and quantitative analyses, giving rise to suppression or enhancement of the signal. As generally recognised, the predominant cause is the presence of undesired components that co-elute in the chromatographic separation and alter the ionisation process. The interfering species can be components of the sample, compounds released during the pre-treatment/extraction process or reagents added to the mobile phase to improve chromatographic resolution. The different mechanisms proposed in literature to explain the suppression or the enhancement of the signal both in electrospray and atmospheric pressure chemical ionisations are presented and the results observed in the different experimental conditions are compared and discussed. All data together lead to conclude that the chemical properties of the target analyte, the kind of matrix, the matrix to analyte concentration ratio, the extraction process, the chromatographic conditions as well as the kind of the mass spectrometry instrumentation and the ionisation conditions can play a role. Likely all these potential causes act in a synergic way and the final effect observed is hardly due to only one of them. Depending on an unpredictable combination of conditions, signal suppression or enhancement can be observed. The review discusses the matrix effects observed in HPLC–MS and HPLC–MS/MS analysis proposes hypotheses to explain the observed behaviours and proposes methods and strategies to overcome the matrix effects.     

Polyelectrolyte‐grafted carbon nanotubes: Synthesis,reversible phase‐transition behavior,and tribological properties as lubricant additives

A novel polyelectrolyte‐grafted multiwalled carbon nanotubes (MWCNTs‐g‐PILs) which possesses a hard backbone of MWCNTs and a soft shell of brush‐like poly (ionic liquids) (PILs) has been synthesized via the surface atom transfer radical polymerization (ATRP). Chemical structure and the grafted PILs quantities of MWCNTs‐g‐PILs were determined by FTIR, TGA, and XPS. TEM and FE‐SEM observations indicate that the nanotubes were coated with a PILs layer, exhibiting core‐shell nanostructures with the PILs chains as the brush‐like or hairy shell and the MWCNTs as the hard backbone. Furthermore, the effect of counter‐anions on the solubility of MWCNTs‐g‐PILs was investigated. The results indicate that relative solubility of MWCNTs‐g‐PILs in various solvents could be switched by anion exchange. This tunable solubility results in the formation of the cycle of reversible phase‐transition. Tribological property of MWCNTs‐g‐PILs as additives in base lubricant 1‐methyl‐3‐butylimidaaolium hexafluorophosphate (LP104) was evaluated using an Optimol SRV oscillating friction and wear tester, confirming that MWCNTs‐g‐PILs are the excellent antiwear and friction‐reducing additives, which can amend the tribological properties of base lubricant significantly. This is attributed to the good dispersibility and core‐shell structure of MWCNTs‐g‐PILs. These results reported in this work may open primarily toward constructing a bridge among carbon nanotues (CNTs), ILs, and lubricant additives and secondarily to prove that CNTs (modified CNTs) as lubricant additives are promising candidates. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7225–7237, 2008     

Analysis of urinary nucleosides. I. Optimisation of high performance liquid chromatography/electrospray mass spectrometry

In order to optimise the analysis of urinary nucleosides by high performance liquid chromatography/mass spectrometry (HPLC/MS), the HPLC separation of these compounds was performed at different 'flow rates' and 0.2mL/min was found to give both a better separation and ionisation. The ionisation conditions were optimised to give the best intensity of the molecules quasi-molecular ions. The ion distribution profile and ionisation in both positive and negative mode were examined and the detection of the protonated molecule in positive mode chosen for further analysis. The limits of detection of the method developed are reported and representative LC/MS and LC/MS/MS spectra shown. Typical urinary nucleoside chromatograms are presented.     

Evaluation of three ionisation modes for the analysis of chlorinated paraffins by gas chromatography/ion-trap mass spectrometry

The applicability of three ionisation modes to the analysis of short-chain chlorinated paraffins (SCCPs) using gas chromatography coupled with mass spectrometry (GC/MS) was evaluated. MS conditions for electron ionisation (EI), positive chemical ionisation (PCI) and electron-capture negative ionisation (ECNI) were optimised using commercially available individual tetra-, penta- and hexachlorodecanes. In addition, mass spectra were studied and fragmentation pathways were proposed for each individual congener. Different fragment ions were evaluated for quantification, and ECNI-MS using [HCl2](-) and [Cl2](-*) ions was selected for the determination of SCCPs. Quality parameters (repeatability, limits of detection and calibration range) were established for the proposed method, which was then applied to the analysis of SCCPs in river sediments.     

Liquid chromatography multi-stage mass spectrometry for the analysis of 5-hydroxymethylfurfural in foods

A new, simple and selective method for the analysis of 5-hydroxymethylfurfural (HMF) in foods by liquid chromatography coupled to ion trap multi-stage mass spectrometry (LC-MS(n)) is proposed in the present study. Several chromatographic columns were tested and the best results were obtained using a phenyl fluorinated column. MS conditions were established using an atmospheric pressure chemical ionisation (APCI) source in the positive ionisation mode. MS/MS was used for quantitative analysis while MS(3) was required for confirmation purposes. Quality parameters such as day-to-day and run-to-run precision (RSD<10%) and detection limit (133 ng g(-1), 333 pg injected) were established. This method was successfully applied to the analysis of HMF content in several Spanish food samples from a local market.