Studies on the aconitine-type alkaloids in the roots of Aconitum Carmichaeli Debx. by HPLC/ESIMS/MS

Studies of aconitine-type alkaloids in the Chinese herb Aconitum Carmichaeli were performed by HPLC/ESIMS/MSⁿ and FTICR/ESIMS in positive ion mode. The characteristic fragmentation pathways in the MSⁿ spectra were summarized based on previously published research literature and further study. According to the fragmentation pathways of mass spectrometry, results from the analysis of standard compounds and reports from literature, 111 compounds were identified or deduced in a total of 117 found compounds in A. Carmichaeli. In the 11 monoester-diterpenoid alkaloids (MDA), 10 diesterditerpenoid alkaloids (DDA) and 81 lipo-alkaloids, the novel alkaloids including 1 MDA, 2 DDA and 48 lipo-alkaloids were detected. In addition, 1 DDA, 7 lipo-alkaloids and 2 alkaloids with small molecular weights that possess C19-norditerpenoid skeleton were reported in A. Carmichaeli for the first time.     

Luminescence of NaGdFPO4:Ln after VUV excitation: A comparison with GdPO4:Ln (Ln=Ce, Tb)

The phosphors NaGdFPO₄:Ln³⁺ and GdPO₄:Ln³⁺ (for Ln³⁺=Ce³⁺ and Tb³⁺) were prepared by solid-state reaction technique, the VUV-vis spectroscopic properties of the phosphors were investigated, and we vividly compare the luminescence of Ce³⁺ and Tb³⁺ in the hosts. For phosphors GdPO₄:Ln³⁺, the band near 155 nm in VUV excitation spectrum is assumed to be the host-related absorption, and for NaGdFPO₄:Ln³⁺ the absorption is moved to longer wavelength, near 170 nm, showing the P-O bond covalency increased after fluoridation. The f-d transitions of Ce³⁺ and Tb³⁺ in the host lattices are assigned and corroborated, and it was found that the 5d states are with lower energy in NaGdFPO₄:Ln³⁺ than those in GdPO₄:Ln³⁺. For fluoridation of GdPO₄:Ln³⁺ to NaGdFPO₄:Ln³⁺, the energy change of Ln³⁺ (Ln=Ce, Tb) 5d states is consistent with that of host-related absorption.     

Studies on the Components of Crude and Processed Fructus Corni by ESI-MS

The components of crude and processed Fructus Corni were investigated by means of electrospray ionization-tandem mass spectrometry（ESI-MSn） technique in the negative ion mode. Compared with those of crude Fructus Corni, the chemical components of the processed Fructus Corni were changed both in quality and in quantity. From the ESI-MS spectra of the crude and processed Fructus Corni, six peaks were selected to establish the characte-ristic ESI-MS peaks. Several factors in the processing procedure were examined. The experimental results demonstrate that the chemical reactions that occurred in the processing procedure can be used for the elucidation of the processed mechanism of Fructus Corni, which is regularly affected by the processing conditions. The present article provides both the chemistry evidence for the understanding of the processing procedure of Fructus Corni and the specific methodology for the research of the processing procedure and quality identification of traditional Chinese medicine.     

Synthesis, structure and magnetic properties of the S=1/2, one-dimensional antiferromagnet, Y5Re2O12

Single crystals of Y₅Re₂O₁₂ have been grown, and the crystal structure has been determined by X-ray diffraction. This compound crystallizes in space group C2/m with cell dimensions of a=12.4081(10) Å b=5.6604(5)Å, c=7.4951(6) Å, β=107.837(3)°, Z=2. The final refinement led to R1=0.0238, WR2=0.0459 for 1053 observed reflections with F>4σ(F₀). Edge-sharing ReO₆ octahedra form infinite linear [ReO₂O_4/2]_n chains along the b direction with alternating short and long Re-Re distances. Three crystallographically independent yttrium atoms surround O2 to form OY₄ tetrahedra, which share edges and corners in the ab plane to form a two-dimensional Y₅O₄ network which separates the [ReO₂O_4/2]_n magnetic chains. This compound is therefore isostructural with the series Ln₅Re₂O₁₂Ln=Gd-Lu, which have been known since 1969. The average Re oxidation state is +4.5 in the chains and a reasonable, if qualitative MO scheme results in one unpaired electron per Re dimer. Consistent with this, magnetic susceptibility data can be fitted to the one-dimensional antiferromagnetic Heisenberg model with S=1/2 and parameters J^intra/k=−89(1)K, g=2.15(4) and χ(TIP)=5(1)×10⁻⁴ emu/mol. There is no sign of long-range magnetic order down to 2 K. These results are contrasted with those for the isostructural Y₅Mo₂O₁₂.     

Synthesis and characterization of n=5, 6 members of the La4Srn−4TinO3n+2 series with layered structure based upon perovskite

Layered compounds have been synthesized and structurally characterized for the n=5 and 6 members of the perovskite-related family La₄Sr_n−4Ti_nO_3n+2 by combining X-ray diffraction and transmission electron microscopy. Their structure can be regarded as comprising [(La,Sr)₅Ti₅O₁₇] and [(La,Sr)₆Ti₆O₂₀] perovskite blocks joined by crystallographic shears along the a-axis, with consecutive blocks shifted by 1/2 [100]_p. The n=5 member is similar to the previously reported n=5 member of other A_nB_nO_3n+2-related series. The n=6 member, which has only been briefly reported in other systems previously, is also a well-behaved member of this A_nB_nO_3n+2 series.     

Seven new alkaloids from the roots of Stemona tuberosa

Seven new alkaloids, named as 1,9-epoxy-9a-hydroxystenine (1), tuberostemoline A (2), tuberostemoline B (3), tuberostemoninol C (4), oxotuberostemonine A (5), the mixture of bisdehydrotuberostemonine D (6), and bisdehydrotuberostemonine E (7), together with four known alkaloids neotuberostemonine (8), sessilifoline B (9), stemoxazolidinone F (10), and tuberostemoninol A (11), were isolated from the roots of Stemona tuberosa. The structures of 1–7 were elucidated through extensive spectroscopic analysis, and the relative configurations of 1–6 and 8 were further confirmed by X-ray crystallographic data. Compounds 8, 9 and the mixture of 6 & 7 exhibited potential acetylcholinesterase (AChE) inhibitory activities.     

Excess enthalpies of alkane-1-amines {CnH2n+1NH2, n = 3-8} + methyl methylthiomethyl sulfoxide and +dimethyl sulfoxide at 298.15 K

Excess enthalpies of binary mixtures between each of alkane-1-amines {C_nH_2n+1NH₂, n=3-8} and methyl methylthiomethyl sulfoxide (MMTSO) or dimethyl sulfoxide (DMSO) have been determined at 298.15 K. All mixtures showed positive enthalpy changes over the whole range of mole fractions.The limiting excess partial molar enthalpies of the aliphatic amines, H₁^E,∞, of all the mixtures with MMTSO or DMSO studied were smaller than those of MMTSO or DMSO, H₂^E,∞, respectively. Linear relations are obtained between limiting excess partial molar enthalpies and number of methylene groups.     

Determination of cadmium and lead species and phytochelatins in pea (Pisum sativum) by HPLC-ICP-MS and HPLC-ESI-MS

An analytical approach based on hyphenated techniques was used for studying the speciation of cadmium and lead in Pisum sativum. Proper preservation conditions were employed to avoid the oxidation of -SH groups and corresponding decomposition of metal-binding complexes. SEC column was washed with 5 mM beta-mercaptoethanol and then samples were analysed using ICP-MS as a detector. Results showed that cadmium is the inhibitor of lead uptake. HPLC-ESI-MSⁿ assays revealed fragmentation pathways of phytochelatins.     

Synthesis and properties of the Co7Se8−xSx and Ni7Se8−xSx solid solutions

We report the synthesis and elementary properties of the Co₇Se_8−xS_x (x=0-8) and Ni₇Se_8−xS_x (x=0-7) solid solutions. Both systems form a NiAs-type structure with metal vacancies. In general, the lattice parameters decrease with increasing x, but in the Ni₇Se_8−xS_x system c increases on going from x=5 to 7. Magnetic susceptibility measurements show that all samples exhibit temperature-independent paramagnetism from 25-250 K. Samples within the Co₇Se_8−xS_x system, as well as Ni₇Se₈ and Ni₇SeS₇, were found to be poor metals with resistivities of ∼0.20 and ∼0.06 mΩ cm at 300 K, respectively. The Sommerfeld constant (γ) was determined from specific heat measurements to be ∼13 mJ/mol_CoK² and ∼7 mJ/mol_NiK² for Co₇Se_8−xS_x and Ni₇Se_8−xS_x, respectively.     

Direct syntheses of Lan+1NinO3n+1 phases (n=1, 2, 3 and ∞) from nanosized co-crystallites

A new direct route for the “bottom up” syntheses of phases in the La_n+1Ni_nO_3n+1 series (n=1, 2, 3 and ∞) has been achieved via single-step heat treatments of nanosized co-crystallized precursors. The co-crystallized precursors were prepared using a continuous hydrothermal flow synthesis system that uses a superheated water flow at ca. 400 °C and 24.1 MPa to produce nanoparticulate slurries. Overall, a significant reduction in time and number of steps for the syntheses of La₃Ni₂O₇ and La₄Ni₃O₁₀ was achieved compared with more conventional synthesis methods, which typically require multiple homogenization and reheating steps over several days.     

Structural, spectroscopic and photoluminescence studies of LiEu(WO4)2−x(MoO4)x as a near-UV convertible phosphor

A series of lithium europium double tungsto-molybdate phosphors LiEu(WO₄)_2−x(MoO₄)_x (x=0, 0.4, 0.8, 1.2, 1.6, 2.0) have been synthesized by solid-state reactions and their crystal structure, optical and luminescent properties were studied. As the molybdate content increases, the intensity of the ⁵D₀→⁷F₂ emission of Eu³⁺ activated at wavelength of 396 nm was found to increase and reach a maximum when the relative ratio of Mo/W is 2:0. These changes were found to be accompanied with the changes in the spectral feature, which can be attributed to the crystal field splitting of the ⁵D₀→⁷F₂ transition. As the molybdate content increases the emission intensity of the 615 nm peak also increases. The intense red-emission of the tungstomolybdate phosphors under near-UV excitation suggests them to be potential candidate for white light generation by using near-UV LEDs. In this study the effect of chemical compositions and crystal structure on the photoluminescent properties of LiEu(WO₄)_2−x(MoO₄)_x is investigated and discussed.     

Thermochemistry of Li1+xMn2−xO4 (0?x?1/3) spinel

Lithium substituted Li_1+xMn_2−xO₄ spinel samples in the entire solid solution range (0?x?1/3) were synthesized by solid-state reaction. The samples with x<0.25 are stoichiometric and those with x?0.25 are oxygen deficient. High-temperature oxide melt solution calorimetry in molten 3Na₂O·4MoO₃ at 974 K was performed to determine their enthalpies of formation from constituent binary oxides at 298 K. The cubic lattice parameter was determined from least-squares fitting of powder XRD data. The variations of the enthalpy of formation from oxides and the lattice parameter with x follow similar trends. The enthalpy of formation from oxides becomes more exothermic with x for stoichiometric compounds (x<0.25) and deviates endothermically from this trend for oxygen-deficient samples (x?0.25). This energetic trend is related to two competing substitution mechanisms of lithium for manganese (oxidation of Mn³⁺ to Mn⁴⁺ versus formation of oxygen vacancies). For stoichiometric spinels, the oxidation of Mn³⁺ to Mn⁴⁺ is dominant, whereas for oxygen-deficient compounds both mechanisms are operative. The endothermic deviation is ascribed to the large endothermic enthalpy of reduction.     

CnSH±与CnS±2的碰撞诱导解离研究

On a home-made crossed ion-molecular beam tandem time-of-flight mass spectrometer, carbon cluster ions with two hetero-atoms, CnSH± and CnS2±, were produced from laser ablation, mass-selected, and collided with pulsed nitrogen beam. From mass analysis of the fragment ions, structures of the cluster ions were characterized as linear, with two hetero-atoms locating on both ends of the carbon chain. The experimental results also revealed the main dissociation channel of the cluster ions. According to the results, for most cluster ions studied in the experiment, the weakest bond is the C-C bond next to the sulfur atom, but in some smaller cluster ions, S-C bond is easier to break. Under the experimental condition, cluster ions may suffer multiple collisions, so fragment ions produced from stepwise dissociation process were observed.     

SO42-改性后的TiO2(锐钛和/或金红石)表面上MoO3的分散性质研究

采用红外(IR)、拉曼(Raman)、X-射线衍射(XRD)、程序升温还原(TPR)等方法考察了经硫酸根改性后的金红石(SR)与锐钛矿(SA)的混合比例变化时的负载型催化剂，MoO₃ / TiO₂(SR+SA)，的一些物理化学性质(如活性组分MoO₃的分散行为、表面酸碱性、氧化还原性)的变化规律。结果表明：对于MoO₃ / TiO₂(SR+SA)样品，低含量MoO₃表面分散时倾向于优先与混合载体中的改性金红石(SR)发生作用；TiO₂载体表面SO₄^2-的存在，使得载体表面产生了新的酸性位，导致样品中表面分散的钼物种主要以聚合八面体状态存在。     

Fractionation and physico-chemical analysis of degraded lignins from the black liquor of Eucalyptus pellita KP-AQ pulping

The degraded Eucalyptus pellita kraft lignin from the black liquor of KP-AQ pulping was precipitated directly at pH ∼2.0 without further purifying, since the lignin obtained is more representative with a whole distribution of molecular weight. The precipitated lignin was fractionated into six fractions by successive extraction with organic solvents. A comparison study of the lignin heterogeneity between the fractions was made in terms of fractional yield, content of associated polysaccharides, alkaline nitrobenzene oxidation, molecular weight distribution, ¹H NMR and ¹³C NMR spectroscopy and thermal stability. It was found that the lignin fractions contained higher associated hemicelluloses and ratios of non-condensed syringyl/guaiacyl units which were extracted by organic solvents with higher Hildebrand solubility parameters. The results from GPC and TGA showed that the polydispersity and the thermal stability of the lignin fractions increased with increasing molecular weight. In the low molecular weight fraction, small amounts of β-aryl ether bond (β-O-4) surviving the KP-AQ pulping were detected by both ¹H and ¹³C NMR spectra.     

Crystal Structure of Pseudorhombohedral InFe1−xTixO3+x/2 (x=2/3)

The structure of pseudorhombohedral-type InFe_1−xTi_xO_3−x/2 (x=2/3) was refined by Rietveld profile fitting. The crystal is a commensurate member of a series in a solution range on InFeO₃-In₂Ti₂O₇ including incommensurate structures. The structure with the unit cell of a=5.9188(1), b=10.1112(2), and c=6.3896(1) Å, β=108.018(2)°, and a space group P2₁/a is the alternate stacking of an edge-shared InO₆ octahedral layer and an Fe/Ti-O plane along c^*. Metal sites on the Fe/Ti-O plane are surrounded by four oxygen atoms on the Fe/Ti-O plane and two axial ones. Electric conductivities of the order 10⁻⁴ S/cm were observed for the samples at 1000 K, while the oxide ion transport number is almost zero as no electromotive force was detected by an oxygen concentration cell.     

Formation of crystalline TiO2−xNx and its photocatalytic activity

Amorphous precursors to nitrogen-doped TiO₂ (NTP) and pure TiO₂ (ATP) powders were synthesized by hydrolytic synthesis and sol-gel method (SGM), respectively. Corresponding crystalline phases were obtained by thermally induced transformation of these amorphous powders. From FT-IR and XPS data, it was concluded that a complex containing titanium and ammonia was formed in the precipitate stage while calcination drove weakly adsorbed ammonium species off the surface, decomposed ammonia bound on surface of precipitated powder and led to substitution of nitrogen atom into the lattice of TiO₂ during the crystallization. The activation energies required for grain growth in amorphous TiO_2−xN_x and TiO₂ samples were determined to be 1.6 and 1.7 kJ/mol, respectively. Those required for the phase transformation from amorphous to crystalline TiO_2−xN_x and TiO₂ were determined to be 129 and 142 kJ/mol, respectively. A relatively low temperature was required for the phase transformation in NTP sample than in ATP sample. The fabricated N-doped TiO₂ photocatalyst absorbed the visible light showing two absorption edges; one in UV range due to titanium oxide as the main edge and the other due to nitrogen doping as a small shoulder. TiO_2−xN_x photocatalyst demonstrated its photoactivity for photocurrent generation and decomposition of 2-propanol (IPA) under visible light irradiation ().     

Preparation and photocatalytic activity of high-efficiency visible-light-responsive photocatalyst SnSx/TiO2

Visible-light-responsive composite photocatalysts SnS₂/TiO₂ and SnS/TiO₂ with different mass ratios were prepared by in-situ synthesis technology in solution with commercial TiO₂. The junction-based materials SnS_x (x=1, 2)/TiO₂ were found to have high visible-light photocatalytic performance and possess much better activity than the single-phase SnS_x or TiO₂. The greatly enhanced photocatalytic activity of the SnS_x/TiO₂ composites was mainly attributed to the matching band potentials and efficient charge transfer and separation at the tight-bonding interface between SnS_x and TiO₂. The fact was confirmed by the comparison of photocatalytic activities of the SnS₂/TiO₂ samples prepared by physical mixing method and in-situ synthesis technique.     

Crystal growth and structural investigation of A2BReO6 (A=Sr, Ba; B=Li, Na)

Single crystals of the double perovskite rhenates A₂BReO₆ (A=Sr, Ba; B=Li, Na) were grown out of molten hydroxide fluxes. Single crystals of orange/yellow Ba₂LiReO₆, Ba₂NaReO₆ and Sr₂LiReO₆ were solved in the cubic, Fm-3m space group with a=8.1214(11) Å, 8.2975(3) Å, and 7.9071(15) Å, respectively, while Sr₂NaReO₆ was determined to be monoclinic P2₁/n with a=5.6737(6) Å, b=5.7988(6) Å, c=8.0431(8) Å, and β=90.02(6) °. The cubic structure consists of a rock salt lattice of corner-shared ReO₆ and MO₆ (M=Li, Na) octahedra which, in the monoclinic structure, are both tilted and rotated. A discrepancy exists between the symmetry of Sr₂LiReO₆ indicated by the single-crystal refinement of flux-grown crystals (cubic, Fm-3m) and the symmetry indicated by the powder diffraction data collected on polycrystalline samples prepared by the ceramic method (tetragonal, I4/m). It is possible that the cubic crystals are a kinetic product that forms in small quantities at low temperatures, while the powder represents the more stable polymorph that forms at higher reaction temperature.     

Neutron powder diffraction study of A2BeF4 (A=K, Rb, Cs): Structure refinement and analysis of background

The crystal structure of potassium, rubidium and caesium fluoroberyllates have been re-examined by neutron powder diffraction at room temperature and at 1.5 K. Previously, their structures, obtained from X-ray data, were described in the Pn2₁a space group. However, the results obtained from Rietveld refinements, using powder neutron diffraction, at both temperatures, indicated that all structures are orthorhombic with space group Pnma. The known phase transition at high temperature is probably related to the appearance of a hexagonal pseudo-symmetry instead of the elimination of the mirror plane between the above mentioned orthorhombic space groups. A possible phase transition, at very low temperature, was discarded considering the stereochemical criteria concerning the structural stability of A₂BX₄ compounds. This was confirmed by thermal analysis. On the other hand, a modulated background has been detected in all samples during the refinements. This is compatible with the presence of an amorphous phase, coexisting with the crystalline phase, or with a disordered component within the main crystalline phase. Instead of using a polynomial function, the background was modelled by Fourier filtering improving the fit for all patterns. The radial distribution function (RDF) was obtained from the analysis of the calculated background and compared with the RDF from the average crystal structure. The advantages of neutron with respect to X-ray diffraction were evidenced for this type of compound with β-K₂SO₄-type structure.