Isolation of antioxidants from Psoralea corylifolia fruits using high-speed counter-current chromatography guided by thin layer chromatography-antioxidant autographic assay

A combinative method using high-speed counter-current chromatography (HSCCC) and thin layer chromatography (TLC) as an antioxidant autographic assay was developed to separate antioxidant components from the fruits of Psoralea corylifolia. Under the guidance of TLC bioautography, eight compounds including five flavonoids and three coumarins were successfully separated from the fruits of P. corylifolia by HSCCC with an optimized two-phase solvent system, n-hexane–ethyl acetate–methanol–water (1:1.1:1.3:1, v/v/v/v). The separation produced 5.91 mg psoralen, 6.26 mg isopsoralen, 3.19 mg psoralidin, 0.92 mg corylifol A, and 2.43 mg bavachinin with corresponding purities of 99.5, 99.8, 99.4, 96.4, and 99.0%, as well as three sub-fractions, in a single run from 250 mg ethyl acetate fraction of P. corylifolia extract. Following an additional clean-up step by preparative TLC, 0.4 mg 8-prenyldaidzein (purity 91.7%), 4.18 mg neobavaisoflavone (purity 97.4%) and 4.36 mg isobavachalcone (purity 96.8%) were separated from the three individual sub-fractions. The structures of the isolated compounds were identified by ¹H NMR and ¹³C NMR. The results of antioxidant activity estimation by electron spin resonance (ESR) method showed that psoralidin was the most active antioxidant with an IC₅₀ value of 44.7 μM. This is the first report on simultaneous separation of eight compounds from P. corylifolia by HSCCC.     

Preparative isolation and purification of isobenzofuranone derivatives and saponins from seeds of Nigella glandulifera Freyn by high-speed counter-current chromatography combined with gel filtration

Although the medicinal plant and food Nigella glandulifera Freyn has been researched for decades, isobenzofuranones have never been isolated before. Two isobenzofuranone derivatives and two saponins were successfully separated and purified from seeds of N. glandulifera Freyn by high-speed counter-current chromatography (HSCCC) with the optimized two-phase solvent system, n-hexane-ethyl acetate–methanol–water (7:3:5:5, v/v). Salfredin B₁₁ (22.1 mg, HPLC purity 95.3%), 5, 7-dihydroxy-6-(3-methybut-2-enyl) isobenzofuran-1(3H)-one (18.9 mg, HPLC purity 97.3%) and crude sample 2 (555 mg) were separated from 600 mg of ethyl acetate extract of N. glandulifera Freyn. Following a cleaning-up step by chromatography on Sephadex LH-20, hederagenin (12 mg) and 3-O-[β-d-xylopyranosyl-(1 → 3)-α-l-rhamnopyranosyl-(1 → 2)-α-l-arabinopyranosyl]-hederagenin (45 mg) were separated from sample 2. All of the fractions before peak II were collected and subjected to a Sephadex LH-20 column and eluted by methanol, two of triterpene saponins (12 mg of hederagenin and 45 mg of 3-O-[β-d-xylopyranosyl-(1 → 3)-α-l-rhamnopyranosyl-(1 → 2)-α-l-arabinopyranosyl]-hederagenin) were isolated. The structures of peak fractions were identified by IR, electron ionization MS, ¹H NMR and ¹³C NMR. 5, 7-Dihydroxy-6-(3-methybut-2-enyl) isobenzofuran-1(3H)-one was isolated for the first time from higher plant and salfredin B11 was isolated for the first time in this plant.     

Preparative separation of rhein from Chinese traditional herb by repeated high-speed counter-current chromatography

High-speed counter-current chromatography (HSCCC) was repeatedly used for isolation and purification of rhein from Rheum officinale Baill (Dahuang) with a two-phase solvent system composed of n-hexane-ethyl acetate-methanol-water (3:7:5:5, v/v), which had been selected by analytical (HSCCC). Using two preparative units of the HSCCC centrifuge, about a 500 mg amount of the crude extract was separated, yielding 6.7 mg of rhein at a high purity of over 97%.     

Completed preparative separation of alkaloids from Cephaltaxus fortunine by step-pH-gradient high-speed counter-current chromatography

Cephalotaxine-type alkaloids are the anti-cancer components in twigs, leaves, roots and seeds of Cephalotaxus fortunine. It is very important to use the limited resource by finding an efficient purification technology of the alkaloids. Separation of cephalotaxine-type alkaloids in Cephalotaxus fortunine by step-pH-gradient high-speed counter-current chromatography (step-pH-gradient HSCCC) was studied in this paper. The step-pH-gradient HSCCC was performed on a HSCCC instrument equipped with a 400-mL column, using the upper phase of ethyl acetate–n-hexane–water, with added 0.01% trifluoroacetic acid (TFA) as stationary phase, and the lower phase of ethyl acetate–n-hexane–water, with added 2% NH₄OH, 0.2% NH₄OH and 0.05% TFA as mobile phase. For each separation, 800 mg of extract of cephalotaxine-type alkaloids was separated to yield 9.3 mg of drupacine, 15.9 mg of wilsonine, 130.4 mg of cephalotaxine, 64.8 mg of epi-wilsonine, 12.8 mg of fortunine and 35.6 mg of acetylcephalotaxine with purities 81.2%, 85.7%, 95.3%, 97.5%, 89.1% and 96.2%, respectively. The recovery of each alkaloid was more than 90%. The structures of the six alkaloids were identified by electrospray ionization mass spectrum (ESI-MS) and ¹H and ¹³C NMR.     

Application of silver ion in the separation of macrolide antibiotic components by high-speed counter-current chromatography

Three macrolide antibiotic components – ascomycin, tacrolimus and dihydrotacrolimus – were separated and purified by silver ion high-speed counter-current chromatography (HSCCC). The solvent system consisted of n-hexane–tert-butyl methyl ether–methanol–water (1:3:6:5, v/v) and silver nitrate (0.10 mol/l). The silver ion acted as a π-complexing agent with tacrolimus because of its extra side double bond compared with ascomycin and dihydrotacrolimus. This complexation modified the partition coefficient values and the separation factors of the three components. As a result, ascomycin, tacrolimus and dihydrotacrolimus were purified from 150 mg extracted crude sample with purities of 97.6%, 98.7% and 96.5%, respectively, and yields over 80% (including their tautomers). These results cannot be achieved with the same solvent system but without the addition of silver ion.     

Preparative isolation of osthol and xanthotoxol from Common Cnidium Fruit (Chinese traditional herb) using stepwise elution by high-speed counter-current chromatography

Preparative high-speed counter-current chromatography (HSCCC) was successfully used for isolation and purification of osthol and xanthotoxol from Cnidium monnieri (L.) Cusson (Common Cnidium Fruit) using stepwise elution with a pair of two-phase solvent systems composed of n-hexane-ethyl acetate-methanol-water at (1:1:1:1, v/v), and (5:5:6:4, v/v), which had been selected by analytical high-speed counter-current chromatography. Using a preparative unit of the HSCCC centrifuge, about a 308 mg amount of the crude extract was separated, yielding 88.3 mg of osthol and 19.4 mg of xanthotoxol at a high purity of over 98%.     

Separation and identification of water-soluble salvianolic acids from Salvia miltiorrhiza Bunge by high-speed counter-current chromatography and ESI-MS analysis

High-speed counter-current chromatography (HSCCC) technique in semi-preparative scale has been applied to separate and purify salvianolic acids from the water extract of Danshen, Salvia miltiorrhiza Bunge. High efficiency HSCCC separation was achieved on a two-phase solvent system composed of a mixture of n-hexane-ethyl acetate-water-methanol (1.5:5:5:1.5, v/v) by eluting the lower mobile phase at a flow-rate of 1.7 ml/min and a revolution of 850 rpm. A total of five well separated peaks were obtained in the HSCCC chromatogram, and their purities determined by HPLC-UV absorption. These peaks were characterized by UV-vis spectra and ESI-MS, and the data compared with the reference standards. Salvianolic acid B was positively identified as one of the major peaks. Three of the remaining four peaks were also tentatively identified as rosmarinic acid, lithospermic acid, and salvianolic acid E, an isomer of salvianolic acid B, all are members of the salvianolic acids group. In a typical run, tens of milligrams of samples can be separated with high efficiency to yield tens of milligrams of purified materials with over 98% purity. HSCCC thus provides a cost-effective alternative to preparative scale HPLC for the semi-preparative scale separation and purification of salvianolic acids in Danshen. With appropriate modifications, the technique should also be applicable to other herbs in general.     

Separation of α-cyclohexylmandelic acid enantiomers using biphasic chiral recognition high-speed counter-current chromatography

This work concentrates on a chiral separation technology named biphasic recognition applied to resolution of α-cyclohexylmandelic acid enantiomers by high-speed counter-current chromatography (HSCCC). The biphasic chiral recognition HSCCC was performed by adding lipophilic (−)-2-ethylhexyl tartrate in the organic stationary phase and hydrophilic hydroxypropyl-β-cyclodextrin in the aqueous mobile phase, which preferentially recognized the (−)-enantiomer and (+)-enantiomer, respectively. The two-phase solvent system composed of n-hexane-methyl tert-butyl ether–water (9:1:10, v/v/v) with the above chiral selectors was selected according to the partition coefficient and separation factor of the target enantiomers. Important parameters involved in the chiral separation were investigated, namely the types of the chiral selectors (CS); the concentration of each chiral selector; pH of the mobile phase and the separation temperature. The mechanism involved in this biphasic recognition chiral separation by HSCCC was discussed. Langmuirian isotherm was employed to estimate the loading limits for a given value of chiral selectors. Under optimum separation conditions, 3.5–22.0 mg of α-cyclohexylmandelic acid racemate were separated using the analytical apparatus and 440 mg of racemate was separated using the preparative one. The purities of both of the fractions including (+)-enantiomer and (−)-enantiomer from the preparative CCC separation were over 99.5% determined by HPLC and enantiomeric excess reached 100% for the (±)-enantiomers. Recovery for the target compounds from the CCC fractions reached 85–88% yielding 186 mg of (+)-enantiomer and 190 mg of (−)-enantiomer. The overall experimental results show that the HSCCC separation of enantiomer based on biphasic recognition, in which only if the CSs involved will show affinity for opposite enantiomers of the analyte, is much more efficient than the traditional monophasic recognition chiral separation, since it utilizes the cooperation of both of lipophilic and hydrophilic chiral selectors.     

Offline coupling of high-speed counter-current chromatography and gas chromatography/mass spectrometry generates a two-dimensional plot of toxaphene components

High-speed counter-current chromatography (HSCCC), a separation technique based solely on the partitioning of solutes between two immiscible liquid phases, was applied for the fractionation of technical toxaphene, an organochlorine pesticide which consists of a complex mixture of structurally closely related compounds. A solvent system (n-hexane/methanol/water 34:24:1, v/v/v) was developed which allowed to separate compounds of technical toxaphene (CTTs) with excellent retention of the stationary phase (S_f = 88%). Subsequent analysis of all HSCCC fractions by gas chromatography coupled to electron-capture negative ion mass spectrometry (GC/ECNI-MS) provided a wealth of information regarding separation characteristics of HSCCC and the composition of technical toxaphene. The visualization of the large amount of data obtained from the offline two-dimensional HSCCC–GC/ECNI-MS experiment was facilitated by the creation of a two-dimensional (2D) contour plot. The contour plot not only provided an excellent overview of the HSCCC separation progress, it also illustrated the differences in selectivity between HSCCC and GC. The results of this proof-of-concept study showed that the 2D chromatographic approach involving HSCCC facilitated the separation of CTTs that coelute in unidimensional GC. Furthermore, the creation of 2D contour plots may provide a useful means of enhancing data visualization for other offline two-dimensional separations.     

Large-scale isolation and purification of geniposide from the fruit of Gardenia jasminoides Ellis by high-speed counter-current chromatography

High-speed counter-current chromatography (HSCCC) was applied to the isolation and purification of geniposide from Gardenia jasminoides Ellis. Analytical HSCCC was used for the preliminary selection of a suitable solvent system composed of ethyl acetate-n-butanol-water (2:1:3, v/v/v). According to the above solvent system, preparative HSCCC was successfully performed with the optimal solvent system composed of ethyl acetate-n-butanol-water (2:1.5:3, v/v/v) yielding 389 mg of geniposide at over 98% purity from 1g of the partially purified extract with 38.9% recovery in a one-step separation.     

Separation of proanthocyanidins isolated from tea leaves using high-speed counter-current chromatography

The proanthocyanidin extract from tea (Camellia sinensis) leaves was purified for the further study of the biological role of proanthocyanidins in blister blight leaf disease of tea, which is caused by the fungus Exobasidium vexans. An aqueous acetone extract of proanthocyanidins prepared from healthy tea leaves was partially purified using Sephadex LH-20 chromatography. The crude proanthocyanidin extract obtained was fractionated with high-speed counter-current chromatography (HSCCC) using the solvent system n-hexane–EtOAc–MeOH–water (1:5:1:5). The purity of the each isolated fraction after a single HSCCC run was evaluated by high-performance liquid chromatography (HPLC). Seven fractions of high purity were isolated. The identity of the compound present in each fraction isolated was established using electrospray ionization mass spectrometry (ESI-MS) and nuclear magnetic resonance (NMR) spectroscopy. Five proanthocyanidins and two flavanol digallates, (−)-epigallocatechin digallate (EGCDG) and (−)-epicatechin digallate (ECDG) were isolated. Comparison of spectral data of the proanthocyanidins isolated with those previously reported indicated that all five were known B-type proanthocyanidins with 2,3-cis stereochemistry in both the upper (u-unit) and the terminal (t-unit) units, and 4R configuration of the C-ring in the u-unit. The proanthocyanidins were established to be dimers composed of (−)-epigallocatechin gallate (EGCG), (−)-epicatechin gallate (ECG) and (−)-epiafzelechin gallate (EAG) units with the following structures: EGCG-(4β → 6)-EGCG, ECG-(4β → 6)-EGCG, EGCG-(4β → 6)-ECG, EAG-(4β → 6)-EGCG, ECG-(4β → 6)-ECG by analysis of spectral data. Therefore HSCCC offers a powerful method for the separation of a group of closely related naturally occurring compounds.     

Isolation of a polysaccharide with anticancer activity from Auricularia polytricha using high-speed countercurrent chromatography with an aqueous two-phase system

Polysaccharides from a crude extract of Auricularia polytricha were separated by high-speed countercurrent chromatography (HSCCC). The separation was performed with an aqueous two-phase system of PEG1000–K₂HPO₄–KH₂PO₄–H₂O (0.5:1.25:1.25:7.0, w/w). The crude sample (2.0 g) was successfully separated into three polysaccharide components of AAPS-1 (192 mg), AAPS-2 (137 mg), and AAPS-3 (98 mg) with molecular weights of 162, 259, and 483 kDa, respectively. These compounds were tested for growth inhibition of transplanted S180 sarcoma in mice. AAPS-2 had an inhibition rate of 40.4%. The structure of AAPS-2 was elucidated from partial hydrolysis, periodate oxidation, acetylation, methylation analysis, and NMR spectroscopy (¹H, ¹³C). These results showed AAPS-2 is a polysaccharide with a backbone of (1 → 3)-linked-β-d-glucopyranosyl and (1 → 3, 6)-linked-β-d-glucopyranosyl residues in a 2:1 ratio, and has one terminal (1→)-β-d-glucopyranosyl at the O-6 position of (1→3, 6)-linked-β-d-glucopyranosyl of the main chain.     

PREPARATIVE ISOLATION AND PURIFICATION OF FIVE FLAVONOIDS FROM POGOSTEMON CABLIN BENTH BY HIGH-SPEED COUNTERCURRENT CHROMATOGRAPHY AND PREPARATIVE HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY

High-speed countercurrent chromatography (HSCCC) and preparative high-performance liquid chromatography (prep-HPLC) were successively used for the separation of pogostone and four flavonoids from Pogostemon cablin (Blanco) Benth. An efficient HSCCC separation was achieved on a two-phase solvent system composed of n-hexane-ethyl acetate-methanol-water (11:5:11:5, v/v/v/v). Three well-separated peaks were obtained in the HSCCC chromatogram. The first and the second fractions each contained two flavonoids which were further separated by preparative HPLC. Consequently, the separation yielded 11.5 mg of 4', 5-Dihydroxy-3', 7-dimethoxyflavanone at a purity of 99%, 20.3 mg of 5- Hydroxy-7, 3', 4'-trimethoxyflavanone at a purity of 98%, 18 mg of 5, 4'-Dihydroxy-3, 7, 3'-trimethoxyflavone at a purity of 96%, and 8 mg of 5-Hydroxy-3, 7, 4'-tetramethoxyflvone at a purity of 98%. The third HSCCC fraction yielded 18.5 mg of pogostone at a purity of 95%. The chemical structures of these compounds were identified by ESI-MS(n), (1)H-NMR, and (13)C-NMR.     

Preparative isolation and purification of syringin and edgeworoside C from Edgeworthia chrysantha Lindl by high-speed counter-current chromatography

The bioactive compound syringin along with edgeworoside C were separated from the n-butanol extract of the stems and barks of Edgeworthia chrysantha Lindl (E. papyrifera) by high-speed counter-current chromatography (HSCCC) while it was difficult to purify each compound by silica gel column chromatography. Syringin was isolated from this plant for the first time. The two-phase solvent system used was composed of ethyl acetate-ethanol-water at an optimized volume ratio of 15:1:15 (v/v/v). Preparative HSCCC yielded, from 110mg of the partially purified extract, 28mg of syringin and 45 mg edgeworoside C each at over 96% purity by high-performance liquid chromatography analysis. Their structures were identified by electron impact ionization MS, 1H NMR and 13C NMR.     

On-line coupling of counter-current chromatography and macroporous resin chromatography for continuous isolation of arctiin from the fruit of Arctium lappa L.

In this work, we have developed a novel hybrid two-dimensional counter-current chromatography and liquid chromatography (2D CCC × LC) system for the continuous purification of arctiin from crude extract of Arctium lappa. The first dimensional CCC column has been designed to fractionalize crude complex extract into pure arctiin effluent using a one-component organic/salt-containing system, and the second dimensional LC column has been packed with macroporous resin for on-line adsorption, desalination and desorption of arctiin which was effluent purified from the first CCC dimension. Thus, the crude arctiin mixture has been purified efficiently and conveniently by on-line CCC × LC in spite of the use of a salt-containing solvent system in CCC separation. As a result, high purity (more than 97%) of arctiin has been isolated by repeated injections both using the ethyl acetate–8% sodium chloride aqueous solution and butanol–1% sodium chloride aqueous solution. By contrast with the traditional CCC processes using multi-component organic/aqueous solvent systems, the present on-line CCC × LC process only used a one-component organic solvent and thus the solvent is easier to recover and regenerate. All of used solvents such as ethyl acetate, n-butanol and NaCl aqueous solution are low toxicity and environment-friendly. Moreover, the lower phase of salt-containing aqueous solution used as mobile phase, only contained minor organic solvent, which will save much organic solvent in continuous separation. In summary, our results indicated that the on-line hybrid 2D CCC × LC system using one-component organic/salt-containing aqueous solution is very promising and powerful tool for high-throughput purification of arctiin from fruits of A. lappa.     

Isolation and purification of canthaxanthin from the microalga Chlorella zofingiensis by high-speed counter-current chromatography

Certain microalgae are considered to be a potential source of canthaxanthin, which possesses strong antioxidant and anticancer activities. A high-speed counter-current chromatography (HSCCC) method was developed for the separation and purification of canthaxanthin from the microalga Chlorella zofingiensis. The crude canthaxanthin was obtained by extraction with organic solvents after the microalgal sample had been saponified. Preparative HSCCC, with a two-phase solvent system composed of n-hexane-ethanol-water (10:9:1 v/v), was successfully performed yielding canthaxanthin at 98.7% purity from 150 mg of the crude extract (2.1% canthaxanthin) in a one-step separation. The recovery of canthaxanthin was 92.3%. This was the first report that canthaxanthin was successfully separated and purified from microalgae.     

Preparative separation of di- and trisulfonated components of Quinoline Yellow using affinity-ligand pH-zone-refining counter-current chromatography

Four positionally isomeric 2-(2-quinolinyl)-1H-indene-1,3(2H)-dionedisulfonic acids (SA) and one triSA, components of the color additive Quinoline Yellow (QY, Color Index No. 47005), were isolated from the dye mixture by affinity-ligand pH-zone-refining counter-current chromatography (CCC) through complementary use of ion-exchange and ion-pair reagents as the ligand. The added ligands facilitated the partitioning of the very polar polysulfonated components into the organic stationary phase of the two-phase solvent systems that consisted of isoamyl alcohol–methyl tert-butyl ether–acetonitrile–water (3:5:1:7), (3:4:1:7) or (3:1:1:5). Thus, separation of a 5-g portion of QY using sulfuric acid as the retainer and dodecylamine as the ligand (an ion-exchange reagent, 20% in the stationary phase), resulted in 1.21 g of 6′,5-diSA and 1.69 g of 6′,8′,5-triSA, both of over 99% purity. A minor component, 8′,4-diSA, not previously reported was also obtained (4.8 mg of over 94% purity) through a similar separation of a different batch of QY using hydrochloric acid as the retainer and 10% dodecylamine as the ligand in the stationary phase. Two components that co-eluted (0.55 g) in the 5 g separation were separated when trifluoroacetic acid was used as the retainer and tetrabutylammonium hydroxide (an ion-pair reagent) as the ligand. The separation resulted in 20.7 mg of 6′,4-diSA, not previously reported, and 111.8 mg of 8′,5-diSA, both of over 98% purity. The isolated compounds were characterized by high-resolution mass spectrometry and proton nuclear magnetic resonance with correlated spectroscopy assignments.     

Preparative isolation and purification of isoflavan and pterocarpan glycosides from Astragalus membranaceus Bge. var. mongholicus (Bge.) Hsiao by high-speed counter-current chromatography

(3R)-(-)-7,2'-Dihydroxy-3',4'-dimethyl isoflavan-7-O-beta-D-glucopyranoside and (6aR, 11aR) 9,10-di-methoxypterocarpan-3-O-beta-D-glucopyranoside were separated from the ethyl acetate extract of the root of Astragalus membranaceus Bge. var. mongholicus (Bge.) Hsiao by high-speed counter-current chromatography (HSCCC). A two-phase system composed of ethyl acetate-ethanol-acetic acid-water (4:1:0.25:5, v/v) was selected by analytical HSCCC. Preparative HSCCC yielded, from 100 mg of the partially purified extract, 50 mg of isoflavan glycoside and 10 mg of pterocarpan glycoside each at over 95% purity by high-performance liquid chromatography (HPLC) analysis. Their structures were identified by MS, 1H NMR and 13C NMR.     

Preparative isolation and purification of ginsenosides Rf,Re, Rd and Rb1 from the roots of Panax ginseng with a salt/containing solvent system and flow step-gradient by high performance counter-current chromatography coupled with an evaporative light scattering detector

Ginseng is a popular herb worldwide and has had varied uses in traditional Asian medicine for thousands of years. There are several different species of the herb, but all share the same constituents. Ginsenosides, the most extensively studied chemical components of ginseng, are generally considered to be one of the most important active ingredients of the plant. In this study, we have developed fast and efficient methodology for isolation of four known ginsenosides Rf, Rd, Re and Rb1 from Ginseng by high performance counter-current chromatography (HPCCC) coupled with evaporative light scattering detection (ELSD). The crude sample for HPCCC was purified firstly from a ginseng extraction using macroporous resin. The enriched saponin fraction (480 mg) was separated by using methylene chloride–methanol–5 mM aqueous ammonium acetate–isopropanol (6:2:4:3, v/v,) as the two-phase solvent system and yielded 10.7 mg of Rf, 11.0 mg of Rd, 13.4 mg of Re and 13.9 mg of Rb1. The purity of these ginsenosides was 99.2%, 88.3%, 93.7% and 91.8%, respectively assessed by HPLC-DAD-ELSD, and their structures were characterized by electrospray ionization mass spectrometry (ESI-MS) and compared with standards. Ammonium acetate was used to shorten the separation time and eliminate emulsification together with a flow step-gradient. The salt can be removed by re-dissolving the sample using acetone.     

Rapid and high-throughput purification of salvianolic acid B from Salvia miltiorrhiza Bunge by high-performance counter-current chromatography

A large-scale purification of salvianolic acid B from Salvia miltiorrhiza Bunge is presented. The method development began with selection of the solvent system, then optimization of the operating parameters and ended up with linear scale-up from an analytical to a preparative instrument. Three factors were used for method optimization and scale-up estimation: purity, process throughput and process efficiency. Preparation was achieved using a two-phase solvent system comprising hexane–ethyl acetate–methanol–acetic acid–water (1:5:1.5:0.00596:5, v/v). This preparation yielded 475 mg of salvianolic acid B with a purity of 96.1% from 1.5 g of crude extract. The process throughput of crude was 2.23 g/h while process efficiency per gram of target compound was 0.769 g/h. Two factors—process environmental risk factor and process evaluation factor were used for evaluation of the separation process.