Spectrophotometric determination of trace amounts of iron(III) by extraction of the mixed-ligand iron-fluoride-purpurin complex

The characteristics of the mixed-ligand iron(III)-fluoride-purpurin complex, including optimum conditions of formation and extraction into methyl isobutyl ketone are described. A procedure for determination of trace amounts of iron in fluoride medium (0.5M) with purpurin (1,2,4,-trihydroxy-anthraquinone) in methyl isobutyl ketone is given. The method is suitable for determining iron in the presence of large amounts of aluminium, cyanide, phosphate and nickel.     

Spectrophotometric determination of trace amounts of iron(III) by extraction of mixed-ligand iron-tartrate-purpurin or iron-NTA-purpurin complex

Summary Spectropbotometric Determination of Trace Amounts of Iron(III) by Extraction of Mixed-Ligand Iron-Tartrate-Purpurin or Iron-NTA-Purpurin Complex A selective method is described for the determination of microgram amounts of iron(III) by means of its reaction at pH 9.0 with purpurin (1,2,4-trihydroxyanthraquinone) and tartrate or NTA and extraction into methyl isobutyl ketone. The molar absorptivity of the 112 iron(III)-auxiliary ligand-purpurin complex is 4.8×10⁴ 1·mole^–1·cm^–1 at 595 nm. Beer's law is obeyed from 0.05 to 0.25 ppm of iron in the aqueous phase. Procedures for determination of iron in tartrate or NTA medium, and fluoride-tartrate-NTA medium are given. The method is suitable for determining iron in Zn metal, W metal, NTA, drinking water, wines, urine and tartrates.     

Masking of iron with fluoride in the extractive atomic-absorption spectrometric determination of chromium in steel

Chromium in steel is determined by oxidation to dichromate, extraction into methyl isobutyl ketone from 1-3 M hydrochloric acid, and atomic-absorption measurements on the extract. The interference of iron in the atomic absorption is eliminated by using fluoride to keep the iron(III) in the aqueous phase in the extraction step.     

A study on the solvent extraction of Pd/II/ with 1,2,3-benzotriazole into methyl iso-butyl ketone

A novel method has been developed for the extraction of Pd/II/ with 1,2,3-benzotriazole /1,2,3-BT/ into methyl isobutyl ketone /MIBK/ at a pH of 4.0. The effects of pH, time of equilibration, solvent, anions and cations on the extraction coefficient have been evaluated. The stoichiometry of the extracted species of 12 was obtained by the slope ratio method and by the method of substoichiometric extraction. Separation factors and decontamination factors for a number of elements in the extraction of Pd/II/ were also obtained.     

Determination of cadmium in tobacco smoke and zinc in tap water by solvent extraction flame atomic absorption spectrometry

Procedures are described for the determination of cadmium in tobacco smoke and zinc in tap water by flame atomic absorption spectrometry after chelation with benzyl 2-pyridyl ketone 2-pyridylhydrazone and extraction with isobutyl methyl ketone. Calibration graphs in the organic layer were linear up to 1.3 g/ml, with sensitivities of 80 ng/ml (Zn) and 71ng/ml (Cd), and limits of detection of 49 ng/ml for zinc and 38 ng/ml for cadmium. RSD values were 2.9% at 0.42 g/ml (Cd) and 4.7% at 0.17 g/ml (Zn).     

Atomic absorption determination of indium after extraction with di-(2-ethylhexyl)phosphoric acid

The equilibrium data show that indium can be quickly extracted from acidic aqueous solutions by di-(2-ethylhexyl)phosphoric acid in methyl isobutyl ketone. In this polar solvent the species ML₃·HL is extracted. The overall extraction constant is higher than that for other tervalent metals. The extraction process can be combined with AAS determination of the indium. The method is fast because stripping is not necessary, and the organic phase can be analysed directly by AAS. Use of a 51 v/v aqueous: organic phase ratio increases the sensitivity. In the pH-range used the method has good selectivity.     

New spectrophotometric thiocyanate determination of iron in metals,alloys, acids and salts

A rapid, sensitive and fairly selective spectrophotometric thiocyanate method for the determination of traces of iron in metals, alloys, acids and salts is described. The iron is isolated from the bulk of the sample by solvent extraction with methyl isobutyl ketone from ₇N lithium chloride solution or ₇N hydrochloric acid. The iron (III) thiocyanate color is developed directly in the ketone extract and then measured spectrophotometrically.     

Determination of gallium in an iron-aluminium matrix by solvent extraction and flame emission spectroscopy

Solvent extraction of gallium(III) into methyl isobutyl ketone from hydrochloric acid solutions containing titanium (III) sulphate provides a rapid method for separation of gallium from an iron/aluminium matrix and may be employed to eliminate the interference of these elements in the flame emission spectrometric determination of gallium.     

Liquid–Liquid Equilibrium of Ternary Systems of Methyl Isobutyl Ketone + <Emphasis Type="Italic">o</Emphasis>-Cresol + Water at 298.2, 313.2 and 323.2 K

Liquid–liquid equilibrium (LLE) data for the methyl isobutyl ketone + o-cresol + water ternary system have been experimentally measured from 298.2 to 323.2 K below 101 kPa. The measured LLE data were verified to be highly consistent through the Othmer–Tobias and Hand equations. The extraction efficiency of methyl isobutyl ketone for o-cresol was assessed by the distribution coefficient and separation factor. The experimental results correlated well with two excess Gibbs energy models: non-random two-liquid and universal quasi chemical, which also yielded binary interaction parameter.     

氯化铝中萃取铁工艺

采用萃取剂N,N,N',N'-四丁基丙二酰胺(TBMA) 、N,N,N',N'-四辛基-3-氧戊二酰胺(TODGA)和甲基异丁基甲酮(MIBK)从氯化铝水溶液中萃取铁,以制备高纯氯化铝。 研究结果表明,当氯化铝溶液中盐酸浓度在4 mol/L左右时,TBMA和MIBK的萃取率在90%以上。 TODGA显示出优异的萃取分离性能。 当氯化铝溶液中Al³⁺浓度为2.0 mol/L,Fe³⁺浓度为0.0036 mol/L(0.2 g/L),HCl浓度为1.2 mol/L时,0.20 mol/L TODGA的环己烷或环己烷有机相对铁的一次萃取率达到99.9%以上,多次萃取后溶液中的铁含量低于0.01 mg/L,能深度去除氯化铝中的铁杂质,在工业化生产中有极大的应用价值。     

Spectrophotometric determination of nickel by extraction of the complex nickel-purpurin

A simple, sensitive procedure for extractive spectrophotometric determination of nickel has been developed. At pH 8.5, nickel reacts with purpurin (1,2,4-trihydroxyanthraquinone) to form a 1:1 red complex, extractable in methyl isobutyl ketone, with an absorption maximum at 525 nm. The characteristics of the complex, including optimum conditions of formation and extraction, and the adherence to Beer's law, are described. Nickel in cobalt and in iron and aluminum alloys has been determined by this method.     

Estimation of iron in fruit samples by substoichiometric extraction with malonic anilide

A radiochemical solvent extraction method for the determination of iron(III) employing the chelating extractant malonic anilide (MA), synthesized in our laboratory, has been described. Effects of different parameters on the extraction of iron(III) from 2M hydrochloric acid into a mixed organic solvent (methyl isobutyl ketone (TIBK) and diethyl ether) have been studied in detail. The method was applied for the estimation of iron content in several fruits using the principle of substoiciometric isotope dilution analysis.     

APDC-MIBK extraction system for the determination of trace elements in saline waters by atomic-absorption spectrophotometry

A technique has been developed for the determination of "soluble" cobalt, copper, iron, lead, nickel and zinc in saline waters by simultaneous extraction of their complexes with ammonium pyrollidine dithiocarbamate (APDC) into methyl isobutyl ketone (MIBK) and subsequent analysis by atomic-absorption spectrophotometry. Particulate matter is analysed separately by dissolving millipore filters in an acetone-hydrochloric acid mixture. Various analytical and instrumental parameters have been evaluated. The method is selfcompensating in that it makes allowance for any incomplete extraction of the complexes. The technique has been applied to the determination of these elements in sea-water and saline lakes.     

A precise uranium assay using solvent extraction and spectrophotometry

The uranium spectrophotometric measurement using the uranylnitrate-quaternaryamine solvent extraction method is investigated to identify factors that affect precision and accuracy of the uranium determination. The inherent spectrophotometric precision was measured with neutral density filters in the sample light path and was found to be <0.1% relative standard deviation (RSD). Under selected experimental conditions, temperature instability has a –0.02% effect on the extraction, and a –0.4% effect on the absorbance of the uranium extract in 2-nitropropane (2-NP) or methyl isobutyl ketone (MIBK) solvents. Under optimum conditions at the 10 mg uranium level, RSDs of 0.1% resulted.     

Influence of the solvent on the extraction of copper(II) from nitrate medium using salicylideneaniline

Different solvents including cyclohexane, dichloromethane, chloroform, toluene, 1-octanol, and methyl isobutyl ketone (MIBK) have been evaluated in extracting copper(II) from nitrate medium by salicylideneaniline. Extracted species differs from solvent to solvent: CuL₂ in cyclohexane, toluene, 1-octanol, and methyl isobutyl ketone. However, in dichloromethane or chloroform, there are two complexes of the type CuL₂ and CuL₂(HL). The extraction constants and percentage of extraction (%E) are calculated for different solvents. Solvent played an important role in recovering copper(II) from the aqueous solution, thus affecting the extraction equilibrium and extraction efficiency. The nonpolar solvent showed better performance than the polar solvent. The maximum extraction efficiency was 85.75% at pH?=?4.5, which was from cyclohexane.     

Liquid—liquid equilibria for the system water + acetic acid + methyl isoamyl ketone

Liquid—liquid equilibrium data obtained over the temperature range 10–60°C for the binary system water + methyl isoamyl ketone (MIAK) are presented together with ternary data for the system water + acetic acid + MIAK at 15, 25 and 40°C. The latter system may be of particular interest for solvent extraction studies, in that MIAK has a flash point much higher than that of methyl isobutyl ketone (MIBK). The new data presented in this paper are correlated in terms of the well-known NRTL and UNIQUAC models. Using the UNIFAC model and the parameter table published recently, experimental results are compared with the predicted values.     

Extraction of zinc with tri(iso-octyl)amine in methyl isobutyl ketone and colorimetric determination with zincon in the organic phase

A study was made of the extraction of zinc from hydrochloric acid solutions with solutions of methyldioctylamine and tri(iso-octyl)amine in methyl isobutyl ketone. Quantitative extraction was accomplished from 2 N hydrochloric acid with 5% (w/v) tri(iso-octyl)amine-methyl isobutyl ketone. A procedure was developed for the colorimetric determination of zinc in the organic phase after extraction using 2-carboxy-2'-hydroxy-5'-sulfoformazylbenzene (Zincon).     

Studies on the extraction and determination of metals-I Extraction of hafnium into methyl isobutyl ketone and tributyl phosphate

The effect of various factors on the distribution of hafnium ( 5.60 × 10⁻⁴M) between different acids and methyl isobutyl ketone (MIBK) or tributyl phosphate (TBP) was studied by using ^{176 + 181} Hf as a tracer, when the extraction is made from 7.5–11M hydrochloric acid with an equal volume of IM TBP in benzene, hafnium is extracted quantitatively (>99%). The hafnium can be stripped with 1–3M hydrochloric acid.     

Extraction and Flameless AAS Determination of Germanium in Lignite Fly Ash

Abstract

The use of dicyclohexyl-18-crown-6 methyl isobutyl ketone solution in extraction and flamelessatomic absorption spectrophotometry (AAS) determination of germanium in lignite fly ashes have been studied.

Germanium is usually determined in lignites after the carbonaceous part of the sample has been burnt by a dry or wet ashing method. However, methods are described for direct determination of germanium.

In the present paper a wet ashing method is reported for the determination of germanium in lignite fly ashes by flameless AAS after extraction into dicyclohexyl-18-crown-6 methyl isobutyl ketone (MIBK) solution. Solvent extraction is a known hydrometallurgical method that could be applied in germanium recovery.     

Determination of zirconium in steels

The determination of zirconium in the range 0.01-0.20% is required for some special alloy steels. A method has been developed, based on initial removal of iron as its chloro-complex by extraction with methyl isobutyl ketone, followed by further extraction after addition of potassium thiocyanate, and determination of the zirconium left in the aqueous phase, with Arsenazo III. The absorbance is measured at 665 nm.