负载离子对型酞菁钴双功能硫醇氧化催化剂

将分别带有正、负电荷基团的季铵盐酞菁钴ＣｏＰＣ「Ｎ（ＣＨ３）３Ｉ」４和碘酸盐菁然ＣｏＰｃ（ＳＯ３Ｎａ）４溶解在一起,负载在由水滑石热分解而成的ＭｇＡｌ复合氧化物碱性载体上,制成负载离子对型酞菁钴催化剂,其所具有的碱经性双功能的特征能够有效地催化１－辛硫醇氧化,当这两种酞菁钴配合物的摩尔比为１时,催化活性最高,并且稳定性也有较明显的改善,这种双功能催化剂体系具有酶催化的特点,即遵循双底物（１－Ｃ８Ｈ     

水滑石焙烧产物负载磺化酞菁钴双功能硫醇氧化催化剂的研究

以水滑石焙烧而成的Ｍｇ－Ａｌ复合氧化物（Ｍｇ（Ａｌ）Ｏ）固体碱负载酞菁钴（ＣｏＰｃＴＳ）双功能催化剂催化１－辛硫醇氧化反应，具有与含１０％ＮａＯＨ的传统催化体系相催化性能，能有效地将１－辛硫醇氧化与二硫化合物，催化剂在循环使用时，活性下降可能与ＣｏＰｃＴＳ氧化中心聚集有关。     

金属有机骨架材料MIL-53(Al)负载钴催化剂的CO催化氧化反应性能

采用溶剂法合成了热稳定性高的金属有机骨架材料MIL-53(Al)(MIL:Materials of Institut Lavoisier),用此材料为载体负载钴催化剂用于CO的催化氧化反应,并与Al2O3负载的钴催化剂进行了对比.采用热重-差热扫描量热(TG-DSC)、傅里叶变换红外(FTIR)光谱、X射线衍射(XRD)、N2物理吸附-脱附、透射电子显微镜(TEM)、氢气程序升温还原(H2-TPR)等方法对催化剂的结构性质进行了表征.TG和N2物理吸附-脱附结果表明,载体MIL-53(Al)有好的稳定性和高的比表面积;XRD以及TEM结果表明Co/MIL-53(Al)上负载的Co3O4颗粒粒径(平均约为5.03 nm)明显小于Al2O3上Co3O4颗粒粒径(平均约为7.83 nm).MIL-53(Al)的三维多孔结构中分布均匀的位点能很好地分散固定Co3O4颗粒,高度分散的Co3O4颗粒有利于CO的催化氧化反应.H2-TPR实验发现Co/MIL(Al)催化剂的还原温度低于Co/Al2O3催化剂的还原温度,低的还原温度表现为高的催化氧化活性.CO催化氧化结果表明,MIL-53(Al)负载钴催化剂的催化活性明显高于Al2O3负载钴催化剂,MIL-53(Al)负载钴催化剂在160°C时使CO氧化的转化率达到98%,到180°C时CO则完全转化,催化剂的结构在催化反应过程中保持稳定.     

CoPc/Al2O3催化分子氧环氧化环己烯的研究

常使用均相催化剂[1-4]催化氧化剂对烯烃进行环氧化来制备环氧环己烷,但均相催化剂存在分离回收难,易二聚失活的缺点.近年来对均相催化剂的固载开展了广泛的研究,如郑岩等[5]使用溶胶 -凝胶包容乙酰丙酮镍,M.Salavati-Niasari等[6]用Al2O3固载Mn(Salen)、Mn(en)2和Mn(acac)2金属配合物用于烯烃环氧化,由于Al2O3廉价易得,酞菁具有不易二聚、降解等较稳定的优点[3],本文以酸性Al2O3为载体,固载酞菁钴金属配合物制备CoPc/Al2O3新型环氧化催化剂,并对其结构进行表征,同时以分子氧为氧源,异丁醛为还原剂考察CoPc/Al2O3催化剂对环己烯的催化环氧化活性,探索了环己烯环氧化的较佳工艺参数.     

碳载钴酞菁催化剂的一步法制备及其在碱性条件下对氧的电催化还原

通过固相加热,一步合成了以VulcanXC-72(碳黑)为载体的碳载钴酞菁(CoPc/C)复合催化剂,其可用作空气电极的氧还原催化剂。通过X射线衍射、红外光谱等测试技术对催化剂进行了表征。利用极化曲线和交流阻抗(EIS)方法测试了其在碱性介质(6mol/LKOH)中对氧还原的催化性能。结果显示,得到的产物为CoPc/C复合物,平均粒径30nm。以磷酸处理的碳黑为载体,在600℃下制备的CoPc/C复合催化剂表现出最佳的催化活性。以其制备的电极在空气气氛下-0.03V(Hg/HgO)电位时即可产生明显氧还原电流,-0.2V时电流密度达90×10-3A/cm2。     

水滑石焙烧产物负载磺化酞菁钴双功能硫醇氧化催化剂的研究 2.催化剂的活性与稳定性

以水滑石焙烧而成的Ｍｇ－Ａｌ复合氧化物（Ｍｇ（Ａ１）Ｏ）固体碱负载磺化酞菁钴（ＣｏＰｃＴＳ）双功能催化剂催化１－辛硫醇氧化反应，具有与含１０％ＮａＯＨ的传统催化体系相似的催化性能，能有效地将１－辛硫醇氧化为二硫化合物．催化剂在循环使用时，活性下降，可能与ＣｏＰｃＴＳ氧化中心聚集有关．     

碳纳米纤维增强钴酞菁催化氧化染料的性能研究

将氨基钴酞菁（CoTAPc）以共价键的形式负载到碳纳米纤维（CNF）上制备碳纳米纤维负载钴酞菁催化剂（CoTAPc-CNF）,利用原子吸收光谱、紫外-可见光吸收光谱、衰减全反射-红外光谱等方法对CoTAPc-CNF进行表征.选用具有氧杂蒽结构的罗丹明6G（Rh6G）为主要研究对象,研究CoTAPc-CNF对Rh6G的催化氧化性能,考察了温度、pH、NaCl、异丙醇等对CoTAPc-CNF催化性能的影响.结果表明,CoTAPc-CNF在常温中性条件下能有效催化氧化Rh6G;随着温度和pH的增加,CoTAPc-CNF催化氧化Rh6G速率逐渐提高;NaCl和异丙醇的加入,没有抑制催化氧化反应的进行,相反大大提高了Rh6G的降解速率,这与一般羟基自由基占主导的高级氧化体系完全不同;进一步采用电子顺磁共振波谱法证实CoTAPc-CNF/H2O2体系确实为非羟基自由基催化机理.另外,研究发现CoTAPc-CNF还能有效催化氧化其他共轭结构的染料,如偶氮染料酸性橙7（AO7）、三芳甲烷染料碱性绿1（BG1）.因此,本文探索的CoTAPc-CNF/H2O2非羟基自由基催化反应体系在处理成分复杂的实际印染废水中具有较好的应用前景.     

碳载钴酞菁催化剂的制备及其氧还原催化性能研究

研究了一种通过固相加热一步合成碳载钴酞菁复合催化剂(CoPc/C)的制备方法.通过XRD,IR对制备的催化剂进行了表征.结果显示,得到的产物为CoPc/C,平均粒径30nm.利用极化曲线和交流阻抗等电化学方法测试了其在碱性介质中对氧还原的催化性能.该催化剂在碱性介质中(6mol·L-1KOH)空气气氛下,氧还原的初始电位达到0V,电极电位为-0.10V vs·Hg/HgO时电流密度达到100mA·cm-2,有显著的氧还原电催化效果.对实验得到的极化曲线及交流阻抗数据进行拟合处理及计算,获得相关动力学参数.     

吡啶掺杂碳载钴酞菁催化氧还原的电化学性能及在燃料电池中的应用

以碳黑(Vulcan XC-72R)为载体, 吡啶(Py)和钴酞菁(CoPc)为催化剂前驱体, 经溶剂分散法制备了Py掺杂碳负载纳米钴酞菁复合催化剂(Py-CoPc/C). 通过扫描电镜-能谱分析(SEM-EDS)、X射线光电子能谱(XPS)分析和X射线衍射(XRD)分析技术对催化剂的组成和微观结构进行了表征, 并运用线性扫描循环伏安法(LSV)和旋转圆盘电极(RDE)技术考察了不同Py掺杂含量对碳载钴酞菁(CoPc/C)催化氧还原反应(ORR)活性的影响及稳定性. 结果显示: Py掺杂可以明显改善CoPc/C 对ORR的电催化性能, 其中掺杂20%Py下所制备的20%Py-20%CoPc/C 催化剂对ORR表现出最佳的催化活性, 以其制备的气体扩散电极在O₂气氛饱和的0.1 mol·L^-1 KOH 电解质溶液中, 0.2 V (相对于标准氢电极)即可产生明显的氧还原电流, 半波电位为-0.03 V. 相比于40%Py/C 和未掺杂的40%CoPc/C, 20%Py-20%CoPc/C催化剂的半波电位分别正移了160 和15 mV. 进一步运用RDE理论研究表明, 在Py-CoPc/C 电极上ORR的电子转移总数为2.38, 高于CoPc/C电极上的电子转移总数1.96, 从而使ORR的选择性明显提高. SEM-EDS和XRD分析表明Py掺杂提高了CoPc/C催化剂的分散性和N含量, 更利于O₂的吸附. XPS分析表明: 吡啶结构的N与石墨结构的N均存在于Py-CoPc/C 催化剂中,与催化剂表面的Co离子配位可能是促使ORR活性提高的原因. 最后以20%Py-20%CoPc/C制备了膜电极组装(MEA)电极, 应用于H₂/O₂ 燃料电池单电池发电, 室温下获得最大发电功率密度为21 mW·cm^-2, 相对于CoPc/C提高至2.4倍.     

新型水溶性钴酞菁的制备及其催化氧化硫醇的性能

采用丁二酸酐、顺丁烯二酸酐对四氨基钴酞菁进行改性后制得两种新型水溶性钴酞菁衍生物, 测试了这两种改性钴酞菁对巯基乙醇的催化氧化性能, 并考察了溶液pH值、温度和时间对催化氧化活性的影响, 结果表明, 在pH＝11时, 两种改性钴酞菁对巯基乙醇的催化氧化性能最好;随着温度的升高, 催化氧化性能提高.     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

非那雄胺合成工艺改进

非那雄胺能抑制5α-还原酶的活性,明显降低二氢睾酮水平,是一种治疗良性前列腺增生的有效药品。该合成工艺以甾烯酮酸为原料,将其与氯化亚砜反应,无须分离即与叔丁胺反应得17β-酰胺化合物,再氧化开环,环合,氢化,脱氢合成了非那雄胺。经元素分析、IR、1HNMR、13CNMR、MS分析表征了其结构。该法无须使用昂贵的2,2-二吡啶二硫化物和剧毒药品苯亚硒酸酐,且以乙酸铵代替氨气,降低了对设备的要求和腐蚀,更适用于工业生产。     

Determination of heats of detonation and influence of components of composite explosives on heats of detonation of high explosives

The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness.

     

Synthesis of phenolic components of Grains of Paradise

Two vanilloids, (5E)-8-(4-hydroxy-3-methoxyphenyl)oct-5-en-4-one (1) and 4-[3-hydroxydecyl]-2-methoxyphenol (2), isolated from the dried seeds of Grains of Paradise (Aframomum melegueta), were synthesized; the latter compound was made as the S-enantiomer and the material derived from the seeds was found to be a 1:1.7 mixture of the R and S isomers. The synthetic route used should allow the preparation of analogs having extended alkyl chains and consequently different lipophilicity, and 3, a homolog of 2, was also prepared.     

Summary of development of the theory of stability of colloids and thin films

In this review, the research of the author in the field of colloidal systems is summarized. The factors influencing colloidal stability are systematized and analyzed. Examples are presented to illustrate the practical utilization of the theory of stability of colloids and thin films.This review was prepared on the basis of the works of the author, which were awarded the State Premium for 1991 in the field of science and technology, chemistry section.Institute of Physical Chemistry, Russian Academy of Sciences, 117915 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 8, pp. 1708–1717, August, 1992.     

Study of hydration of two cements of different strengths

Main hydration products of two cement pastes, i.e. CSH-gel, portlandite (P) (and specific surface S) were studied by static heating, and by SEM, TEM and XRD, as a function of cement strength (C-33 and C-43) hydration time (th) and subsequent hydration in water vapour.Total change in mass on hydration and air drying, M_o, increased with strength of cement paste and with hydration time. Content of water escaping at 110 to 220°C, defined as water bound with low energy, mainly interlayer and hydrate water, was independent on cement strength but its content increased with (th). Content of chemically bound (zeolitic) water in CSH-gel, escaping at 220-400°C, was slightly dependent on strength and increased with (th). It was possibly derived from the dehydroxylation of CSH-gel and AFm phase. Portlandite water, escaping at 400-500°C, was independent on cement strength and was higher on longer hydration. Large P crystals were formed in the weaker cement paste C-33. Smaller crystals were formed in C-43 but they increased with (th). Carbonate formated on contact with air (calcite, vaterite and aragonite), decomposed in cement at 600-700^oC. It was high in pastes C-33(1 month) and C-43(1 month), i.e. 5.7 and 3.3%, respectively; it was less than 1% after 6 hydration months (low sensitivity to carbonation) in agreement with the XRD study showing carbonates in the air dry paste (1month), and its absence on prolonged hydration (6 months) and on acetone treatment. Water vapour treatment of (6 months) pastes or wetting-drying increased this sensitivity.Nanosized P-crystals, detected by TEM, could contribute to the cement strength; carbonate was observed on the rims of gel clusters.This revised version was published online in November 2005 with corrections to the Cover Date.     

氯氧化镁生成热的研究

用氧化镁氯化镁水溶液制备了8水合氯氧化镁[nMg(OH)2·MgCl2·8H2O], 并测定了其在盐酸中的溶解热, 实验结果表明, 氯氧化镁溶解热与n值呈线性关系, 根据溶解热求出5Mg(OH)2·MgCl2·8H2O和3Mg(OH)2·MgCl2·8H2O的生成热分别为-7727.1和5888.1kJ·mol^1^-。     

Thermodynamics of the formation of oxosulfides of rare-earth elements

The enthalpies of solution of several oxosulfides of rare-earth elements and the high-temperature enthalpies of oxosulfides and oxosulfates of lanthanum and yttrium were measured using solution calorimetry and high-temperature microcalorimetry techniques. Standard enthalpies of formation and some thermodynamic properties of oxosulfides and oxosulfates were calculated. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2 pp. 294–297, February, 1997.     

探究“铁的锈蚀条件”实验创新设计

设计了铁的锈蚀实验,说明了铁钉的处理方法,增加了温度、酸、碱的影响条件,实现了铁跟蒸馏水及空气中氧气快速反应而生锈,使实验在5 min左右就能够得到准确的结果。