An efficient synthesis of l-allono-1,4-lactone from 2,3:5,6-di-O-isopropylidene-d-mannono-1,4-lactone

We reported herein an efficient synthesis of l-allono-1,4-lactone from 2,3:5,6-di-O-isopropylidene-d-mannono-1,4-lactone in five steps. The key feature of this method involved a one-pot, ‘double inversion’ procedure at the stereocenters of C-4 and C-5 of d-mannono-1,4-lactone to afford the target molecule.     

Improved synthesis of 6-amino-6-deoxy-d-galactono-1,6-lactam and d-mannono-1,6-lactam from corresponding unprotected d-hexono-1,4-lactones

Regioselective bromination of unprotected d-galactono-1,4-lactone and d-mannono-1,4-lactone with PPh₃/CBr₄ led to 6-bromo-6-deoxy derivatives. These intermediates were treated with LiN₃ and hydrogenated to give 6-amino-6-deoxy-d-galactono-1,6-lactam (8) and 6-amino-6-deoxy-d-mannono-1,6-lactam (13) in 74 and 67% overall yield, respectively.     

Efficient synthesis of new N-alkyl-d-ribono-1,5-lactams from d-ribono-1,4-lactone

d-Ribono-1,4-lactone was treated with ethylamine in DMF to afford N-ethyl-d-ribonamide 9a in quantitative yield. Bromination of amide 9a by the system SOBr₂ in DMF or PPh₃/CBr₄ in pyridine led, after acetylation, to epoxide 7. However, treatment of amide 9a with acetyl bromide in dioxane followed by acetylation gave 2,3,4-tri-O-acetyl-5-bromo-5-deoxyl-N-ethyl-d-ribonamide 10a. Methanolysis of 10a, with sodium methoxide, afforded the N-ethyl-d-ribonolactam 11a in 51% overall yields. Using this method, N-butyl, N-hexyl, N-dodecyl, and N-benzyl-d-ribonolactams 11b-e were obtained in good yields (48-53%).     

Intermolecular/interionic interactions in l-isoleucine-, l-proline-, and l-glutamine-aqueous electrolyte systems

Speed of sound and density values for ternary systems (amino acid + salt + water): l-isoleucine/l-proline/l-glutamine in aqueous solutions of 1.5 M KCl, 1 M KNO₃, and 0.5 M K₂SO₄ have been measured for several concentrations of amino acids at different temperatures (303.15, 308.15, 313.15, 318.15, and 323.15 K). Using speed of sound and density data, the thermodynamic parameters such as isentropic compressibility (κ_s), change in isentropic compressibility (Δκ_s) and relative change (Δκ_s/κ₀) in isentropic compressibility have been computed. The isentropic compressibility values decrease with increase in the amino acid concentration as well as with temperature. The decrease in κ_s values with increase in concentration of l-isoleucine/l-proline/l-glutamine in 1.5 M KCl, 1 M KNO₃, and 0.5 M K₂SO₄ has been ascribed to an increase in the number of incompressible zwitterions in solutions, and the formation of ‘zwitterions-ions’ and ‘zwitterions-water dipole’ entities in solutions. The decrease in κ_s values with increase in temperature has been attributed to the corresponding decrease of κ_relax (a relaxational part of compressibility), which is dominant over the corresponding increase of κ_∞ (an instantaneous part of compressibility). The trends of variation of Δκ_s and Δκ_s/κ₀ with variations in solute concentration and temperature have also been discussed in terms of solute-solute and solute-solvent intermolecular/interionic interactions operative in the systems.     

A d,l-proline catalyzed diastereoselective trimolecular condensation: an approach to the one-pot synthesis of perhydrofuro[3,2-b]pyran-5-ones

d,l-Proline was found to catalyze efficiently the one-pot trimolecular condensation of indoles, a sugar hydroxyaldehyde, and Meldrum’s acid followed by intramolecular cyclization with evolution of carbon dioxide and elimination of acetone to afford 7-(1H-3-indolyl)-2,3-dimethoxyperhydrofuro[3,2-b]pyran-5-ones. The reaction proceeded cleanly at ambient temperature to afford the products in good yields with high diastereoselectivity.     

Racemization behavior of l,l-lactide during heating

To control the depolymerization process of poly(l-lactic acid) into l,l-lactide for feedstock recycling, the racemization of l,l-lactide as a post-depolymerization reaction was investigated. In the absence of a catalyst, the conversion to meso-lactide increased with increase in the heating temperature and time at a higher rate than the conversion into oligomers. The resulting high composition of meso-lactide suggests that the direct racemization of l,l-lactide had occurred in addition to the known racemization mechanism that occurs on the oligomer chains. In the presence of MgO, the oligomerization rapidly proceeded to reach an equilibrium state between monomers and oligomers. The equilibrium among l,l-, meso-, and d,d-lactides was found to be a convergent composition ratio l,l-:meso-:d,d-lactides = 1:1.22:0.99 (wt/wt/wt) after 120 min at 300 °C. This composition ratio also indicates that in addition to the known racemization reaction on the oligomer chains, direct racemization among the lactides is also a frequent occurrence.     

Effects of molecular weight and small amounts of d-lactide units on hydrolytic degradation of poly(l-lactic acid)s

Films of poly(l-lactic acid) (PLLA) with different number-average molecular weights (M_n) and d-lactide unit contents (X_d) were made amorphous and the effects of molecular weight and small amounts of d-lactide units on the hydrolytic degradation behavior in phosphate-buffered solution at 37 °C of PLLA were investigated. The degraded films were investigated using gravimetry, gel permeation chromatography, polarimetry, differential scanning calorimetry, X-ray diffractometry, and tensile testing. To exclude the effects of crystallinity on the hydrolytic degradation, the films were made amorphous by melt-quenching. The incorporation of small amounts of d-lactide units drastically enhanced the hydrolytic degradation of PLLA. In the period of 0-32 weeks, the hydrolytic degradation rate constant (k) of PLLA films increased with increasing X_d, while the k values did not depend on M_n. This means that the effects of X_d on the hydrolytic degradation rate of the films are higher than those of M_n. In contrast, in the period of 32-60 weeks neither X_d nor M_n was a crucial parameter to determine k values, probably because in addition to these parameters the differences in the amount of catalytic oligomers accumulated in films and crystallinity affect the hydrolytic degradation behavior of the films. The initially amorphous PLLA films remained amorphous even after the hydrolytic degradation for 60 weeks.     

Kinetics of thermo-oxidative and thermal degradation of poly(d,l-lactide) (PDLLA) at processing temperature

Poly(d,l-lactide) (PDLLA) degraded at processing temperature under air and nitrogen. A random chain scission model was established and used to determine the activation energy E_a, and FT-IR, ¹H and ¹³C NMR were used to elucidate the degradation behavior under different atmospheres. Results showed that there were two to three stages. The 1st stage was dominated by the oligomers containing carboxylic acid groups and hydroxyl groups, during which oxygen and nitrogen had little effect on the degradation, thus they share similar E_a. When the oligomers were consumed over or evaporated, the 2nd stage began, and oxygen had a promoting effect on the thermo-oxidation process, resulting in the great decrease in E_a. The third stage of PDLLA was observed when it degraded under nitrogen over 200 °C, which was caused by the appearance of carboxylic acid substance.     

A highly efficient synthesis of unnatural l-sugars from d-ribose

A preparative and short synthesis of l-ribose and l-apiose was accomplished starting from d-ribose via stereoselective cis-dihydroxylation and C2-hydroxymethylation, respectively. These l-sugars can serve as versatile intermediates for the synthesis of l-nucleosides.     

An efficient synthesis of d-ribo-C18-phytosphingosine and l-arabino-C18-phytosphingosine from d-fructose

d-ribo-C₁₈-phytosphingosine and l-arabino-C₁₈-phytosphingosine were synthesised starting from commercially inexpensive d-fructose. Metal-mediated fragmentation and stereoselective reduction were used as key steps to provide the hydrophilic portion of d-ribo and l-arabino phytosphingosines. Grubbs’ cross-metathesis and hydrogenation allowed the incorporation of hydrophobic tail.     

Selection of synthetic receptors capable of sensing the difference in binding of d-Ala-d-Ala or d-Ala-d-Lac ligands by screening of a combinatorial CTV-based library

Screening of a combinatorial CTV-based artificial, synthetic receptor library 1 {1-13, 1-13, 1-13} for binding of a variety d-Ala-d-Ala and d-Ala-d-Lac containing ligands (6-11) was carried out in phosphate buffer (0.1 N, pH=7.0). After screening and Edman sequencing, synthetic receptors were found containing amino acid sequences, which are either characteristic for binding dye labeled d-Ala-d-Ala or d-Ala-d-Lac containing ligands. For example, receptors capable of binding d-Ala-d-Ala containing ligands 6, 7, 9 and 11 contained—almost in all cases—at least one basic amino acid residue—predominantly Lys—in their arms. This was really a striking difference with the arms of the receptors capable of binding d-Ala-d-Lac containing ligands 8 and 10, which usually contained a significant number of polar amino acids (Gln and Ser), especially in ligand 8, but hardly any basic amino acids. Use of different (fluorescent) dye labels showed that the label has a profound, albeit not decisive, influence on the binding by the receptor. A hit from the screening of the CTV-library with FITC-peptidoglycan (6) was selected for resynthesis and validation.     

Novel practical synthesis of d-cycloserine

The synthesis of d-cycloserine has been successfully accomplished from the readily available d-serine through three simple and efficient routes. In each synthetic strategy, cyclization reactions are involved as the key step, and one-pot processes are employed. The simple treatment and mild reaction conditions are attractive features in this methodology.     

A convenient synthesis of l-ribose from d-fructose

An efficient method for the stereoselective synthesis of l-ribose was accomplished starting from commercially inexpensive d-fructose. The intermediates in the process can serve as versatile precursors for the preparation of l-nucleoside analogues.     

Synthesis of 6-amino-6-deoxy-d-gulono-1,6-lactam and l-gulono-1,6-lactam derived from corresponding 5,6-O-sulfinyl hexono-1,4-lactones

Syntheses of 6-amino-6-deoxy-2,3-O-isopropylidene-d-gulono- and l-gulono-1,6-lactams 3 and 4 from corresponding glycono-1,4-lactones are described. Activation of the primary hydroxyl group requires 5,6-cyclic sulfite intermediate to obtain 6-azido-6-deoxy derivatives, which are cyclized after reduction.     

Carbohydrate-derived spiroketals: stereoselective synthesis of di-d-fructose dianhydrides

A one-pot synthesis of di-d-fructose dianhydrides (DFAs) having the 1,6,9,13-tetraoxadispiro[4.2.4.2]tetradecane and 1,7,10,15-tetraoxadispiro[5.2.5.2]hexadecane skeleton has been accomplished. The methodology relies on the ability of per-O-protected 1,2-O-isopropylidene β-d-fructofuranose and β-d-fructopyranose derivatives to undergo a tandem acetal cleavage-intermolecular glycosylation-intramolecular spiroketalization process by reaction with suitable acid promoters, such as boron trifluoride etherate or trifluoromethanesulfonic acid, in apolar organic solvents. Spirocyclization proceeds then under irreversible reaction conditions to give binary mixtures of di-d-fructofuranose (α,α and α,β diastereomers) or di-d-fructopyranose 1,2′:2,1′ dianhydrides (β,β and α,β), respectively, the stereochemical outcome being dependent on the non-participating or participating character of the protecting groups. Thus, benzylated and allylated derivatives afford, preferentially, the non-symmetric DFAs (α,β), with diastereomeric excess up to 92%. In contrast, the use of participating benzoyl groups favours the C₂-symmetric diastereomer in both series.     

Novel synthesis of 5-thio-hexopyranoside: preparation of 5-thio-d- and l-glucose and 1,6-anhydro-5-thio-l- and d-altrose

Asymmetric synthesis of both d- and l-isomers of 5-thioglucose and 1,6-anhydro-5-thioaltrose are described. The key intermediates, l- and d-threose diethylacetal derivatives, were derived by chemical transformation from d-xylose or d-arabinose and by Sharpless asymmetric dihydroxylation from γ-hydroxycrotylaldehyde diethylacetal. They transformed to γ-thiiranyl diethylacetal via trans-2,3-epoxy alcohol in seven steps. Acetic acid-promoted cyclization of γ-thiiranyl diethylacetal gave 5-thiopyranoside. Removal of the protected groups under the acidic conditions afforded 5-thio-d- and l-glucose and 1,6-anhydro-5-thio-l- and d-altrose, respectively.     

Intermolecular/interionic interactions in l-leucine-, l-asparagine-, and glycylglycine-aqueous electrolyte systems

Ultrasonic velocity and density values have been measured for ternary systems (amino acid/di-peptide + salt + water): l-leucine/l-asparagine/glycylglycine each in 1.5 M aqueous solutions of NaCl or NaNO₃ or KNO₃ used as solvents for several concentrations of amino acids/di-peptide at different temperatures in the range of 298.15-323.15 K. The ultrasonic velocity values have been found to increase with increase in amino acids/di-peptide concentration and temperature in all the systems. The increase in ultrasonic velocity with increase in concentration has been discussed in terms of electrostatic interactions occurring between terminal groups of zwitterions (NH₄⁺ and COO⁻) and Na⁺, K⁺, Cl⁻, NO₃⁻ ions. The interactions of water dipoles with cations/anions and with zwitterions have also been taken into consideration. It has been observed that the ion-zwitterion and ion-dipole attractive forces are stronger than those of ion-hydrophobic repulsive forces. These interactions comprehensively introduce the cohesion into solutions under investigation. The cohesive forces are further enhanced on successive increases in solute concentration. Using ultrasonic velocity and density data, the parameters such as isentropic compressibility (κ_s), change (Δκ_s) and relative change (Δκ_s/κ₀) in isentropic compressibility, specific acoustic impedance (Z) and relative association (RA) have been computed. The isentropic compressibility values decrease with increase in the concentration of solutes as well as with temperature. The decrease in κ_s values with increase in concentration of l-leucine, l-asparagine and glycylglycine in 1.5 M aqueous solutions of NaCl, NaNO₃ and KNO₃ have been explained in terms of an increase in the number of incompressible molecules/zwitterions in solutions and the formation of compact zwitterions-water dipole and zwitterions-ions structures in solutions. The decrease in κ_s values with increase in temperature has been attributed to the corresponding decrease of κ_relax. (relaxational part of compressibility)_, which is dominant over the corresponding increase of κ_∞ (instantaneous part of compressibility). The trends of variations of Δκ_s, Δκ_s/κ₀, Z and RA with change of concentration and temperature have also been interpreted in terms of various intermolecular/interionic interactions existing in the systems.     

Influence of hydrolytic degradation on the surface properties of poly-5d/95l-lactide resorbable bone plates

This study explores in vitro aging effects on the surface properties of resorbable PLA95 (poly-5d/95l-lactide) bone plates. The in vitro degradation of injection molded PLA95 bone plates was undertaken by soaking them in a PBS solution. Specimens were harvested at 0, 4, 6, 8, 12, 20, and 26 weeks. After each in vitro aging period, the surface morphology, viscosity, chemical structure, wettability, and thermal properties of the PLA95 bone plates were examined by scanning electron microscopy (SEM), capillary viscometers, attenuated total reflection fourier transform infrared spectroscopy (ATR-FTIR), contact angle, and modulated differential scanning calorimetry (MDSC), respectively. The surface morphology of aged PLA95 bone plates exhibited bulk erosion. As hydrolysis progressed, the inherent viscosity (I.V.) of the PLA95 plates gradually decreased from 0.83 ± 0.01 dL/g at week 0-0.46 ± 0.03 dL/g at week 26. However, the absorbance peak intensity ratio between δ_{as CH3} (A_1452 cm⁻¹) and ν_CO (A_1750 cm⁻¹) and the contact angle reveal different tendencies than that of molecular weight, which decreases. The contact angle of the PLA95 plates decreased until week 4, increased until week 8, and subsequently decreased again. Peak separation analysis reveals that the equilibrium part of the modulated DSC overlapped curves exhibit triple endothermic peaks. Over time, in vitro degradation changes the position and area of the individual peaks. After different time periods of degradation, the variation of wettability shows a tendency similar to the change of PLA95 plates crystallinity; the intensity ratio of A_1452 cm⁻¹ and A_1750 cm⁻¹ (δ_{as CH3}/ν _CO) absorbance peaks varied like the ratio of β/α-crystal heat of fusion. Results also show a similarity in the degradation time dependence in MDSC, contact angle, and ATR-FTIR measurements. During the in vitro aging process, the breakdown and subsequent recrystallization of PLA95 molecular chains might be attributed to a progressive change in wettability and the molecular conformation between δ_{as CH3} and ν_CO.     

An efficient approach to d-threo-3-hydroxyaspartic acid for the synthesis of novel l-threo-oxazolines as selective blockers of glutamate reversed uptake

An efficient, stereoselective synthetic strategy to d-threo-3-hydroxyaspartic acid was developed. Starting from l-(2S,3S)-N-benzoyl-3-hydroxyaspartic acid dimethyl ester by a Deoxo-fluor-catalyzed cyclization reaction, an inversion of configuration at the β-center (erythro isomer), was observed. A base-induced epimerization reaction led to the d-trans-isomer, which was hydrolyzed to give d-threo-3-hydroxyaspartic acid with excellent stereoselectivity and overall yield. Starting from d-threo-3-hydroxyaspartic acid, l-threo-oxazolines can be stereoselectively synthesized.