A new class of azobenzene chelators for Mg and Ca in buffer at physiological pH

A new class of azobenzene-based chelators, trans-3a and trans-3b (3a and 3b), were designed and synthesized in two steps. Both 3a and 3b were readily dissolved in a buffer solution at physiological pH. The values of the dissociation constant of 3a and 3b for Mg²⁺ and Ca²⁺ were determined by the Hills plot; K_d^Mg=1.12 mM and K_d^Ca=660 μM for 3a and K_d^Mg=158 μM and K_d^Ca=200 μM for 3b, respectively. On irradiation at 489 nm light, 3a isomerized to give cis-form, which underwent cis-to-trans thermal isomerization in darkness at room temperature. The change in the absorption spectrum of the irradiated solution of 3a in the presence of Mg²⁺, showing the cis-to-trans thermal isomerization, indicates that the affinity of cis-3a for Mg²⁺ is lower than that of 3a.     

Ferrocenoyl-amino acids: redox response towards di- and trivalent metal ions

The interaction of six ferrocene-amino acid conjugates (Fc-CO-Gly-OH (2a), Fc-CO-Asp-OH (3a), Fc-CO-Glu-OH (4a), 1,1′-Fc(CO-Gly-OH) (2b), 1,1′-Fc(CO-Asp-OH) (3b), and 1,1′-Fc(CO-Glu-OH) (4b)) with Mg²⁺, Ca²⁺, Zn²⁺, La³⁺, and Tb³⁺ was investigated in aqueous solutions using cyclic voltammetry (CV) and differential pulse voltammetry (DPV). Addition of metal ions to solutions caused, in some cases, large changes in the half-wave potential, E_1/2. Our electrochemical results show that the Gly systems, 2a and 2b, show a preference for binding Mg²⁺, whereas the Asp and Glu conjugates prefer binding Ln³⁺.     

Carbonyl complexes of manganese, rhenium and molybdenum with 2-pyridylimino acid ligands

[MBr(CO)₃{κ²(N,O)-pyca}] [M = Mn(1a), Re(1b), pyca = pyridine-2-carboxaldehyde] and [MoCl(η³-C₃H₄Me-2)(CO)₂{κ²(N,O)-pyca}] (1c) react with aminoacid β-alanine to give the corresponding iminopyridine complexes 2a-2c. The same method affords the iminopyridine derivatives from γ-aminobutyric acid (GABA) (3a-3c) and 3-aminobenzoic acid (4a-4c). For complexes 2a-2c, 3a, 3c and 4a, the solid state structures have been determined by X-ray crystallography, revealing interesting differences in their hydrogen-bonding patterns in solid state.     

Synthesis and reactivity of para-substituted benzoylmethyltellurium(II and IV) compounds: observation of intermolecular C-H-O hydrogen bonding in the crystal structure of (p-MeOC6H4COCH2)2TeBr2

Bis(p-substituted benzoylmethyl)tellurium dibromides, (p-YC₆H₄COCH₂)₂TeBr₂, (Y=H (1a), Me (1b), MeO (1c)) can be prepared either by direct insertion of elemental Te across C_Rf-Br bonds (where C_Rf refers to α-carbon of a functionalized organic moiety) or by the oxidative addition of bromine to (p-YC₆H₄COCH₂)₂Te (Y=H (2a), Me (2b), MeO (2c)). Bis(p-substituted benzoylmethyl)tellurium dichlorides, (p-YC₆H₄COCH₂)₂TeCl₂ (Y=H (3a), Me (3b), MeO (3c)), are prepared by the reaction of the bis(p-substituted benzoylmethyl)tellurides 2a-c with SO₂Cl₂, whereas the corresponding diiodides (p-YC₆H₄COCH₂)₂TeI₂ (Y=H (4a), Me (4b), MeO (4c)) can be obtained by the metathetical reaction of 1a-c with KI, or alternatively, by the oxidative addition of iodine to 2a-c. The reaction of 2a-c with allyl bromide affords the diorganotellurium dibromides 1a-c, rather than the expected triorganotelluronium bromides. Compounds 1-4 were characterized by elemental analyses, IR spectroscopy, ¹H, ¹³C and ¹²⁵Te NMR spectroscopy (solution and solid-state) and in case of 1c also by X-ray crystallography. (p-MeOC₆H₄COCH₂)₂TeBr₂ (1c) provides, a rare example, among organotellurium compounds, of a supramolecular architecture, where C-H-O hydrogen bonds appear to be the non-covalent intermolecular associative force that dominates the crystal packing.     

Synthesis and properties of novel 5-(cyclohepta-2′,4′,6′-trienylidene)pyrimidine-2(1H),4(3H),6(5H)-triones: methodology for synthesizing cyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium tetrafluoroborates

Novel condensation reaction of tropone with N-substituted and N,N′-disubstitued barbituric acids in Ac₂O afforded 5-(cyclohepta-2′,4′,6′-trienylidene)pyrimidine-2(1H),4(3H),6(5H)-trione derivatives (8a-f) in moderate to good yields. The ¹³C NMR spectral study of 8a-f revealed that the contribution of zwitterionic resonance structures is less important as compared with that of 8,8-dicyanoheptafulvene. The rotational barriers (ΔG^‡) around the exocyclic double bond of mono-substituted derivatives 8a-c were obtained to be 14.51-15.03 kcal mol⁻¹ by the variable temperature ¹H NMR measurements. The electrochemical properties of 8a-f were also studied by CV measurement. Upon treatment with DDQ, 8a-c underwent oxidative cyclization to give two products, 7 and 9-substituted cyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium tetrafluoroborates (11a-c·BF₄⁻ and 12a-c·BF₄⁻) in various ratios, while that of disubstituted derivatives 8d-f afforded 7,9-disubstituted cyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium tetrafluoroborate (11d-f·BF₄⁻) in good yields. Similarly, preparation of known 5-(1′-oxocycloheptatrien-2′-yl)-pyrimidine-2(1H),4(3H),6(5H)-trione derivatives (14a-d) and novel derivatives 14e,f was carried out. Treatment of 14a-c with aq. HBF₄/Ac₂O afforded two kinds of novel products 11a-c·BF₄⁻ and 12a,c·BF₄⁻ in various ratios, respectively, while that of 14d-f afforded 11d-f. The product ratios of 11a-c·BF₄⁻ and 12a-c·BF₄⁻ observed in two kinds of cyclization reactions were rationalized on the basis of MO calculations of model compounds 20a and 21a. The spectroscopic and electrochemical properties of 11a-f·BF₄⁻ and 12a-c·BF₄⁻ were studied, and structural characterization of 11c·BF₄⁻ based on the X-ray crystal analysis and MO calculation was also performed.     

Phosphorus–nitrogen compounds: Part 19. Syntheses,structural and electrochemical investigations,biological activities,and DNA interactions of new spirocyclic monoferrocenylcyclotriphosphazenes

The reactions of hexachlorocyclotriphosphazatriene, N₃P₃Cl₆, with N-alkyl-N-ferrocenylmethylethylene diamines, FcCH₂NH(CH₂)₂NHR₁ [R₁ = Me (1) and Et (2)], and sodium [3-(N-ferrocenylmethylamino)-1-propanoxide] (3) produce spirocyclic monoferrocenyl tetrachlorophosphazenes (1a–3a). The tetrapyrrolidinophosphazenes (1b–3b) are prepared from the reactions of corresponding phosphazenes (1a–3a) with excess pyrrolidine. The reaction of 1a with excess morpholine affords geminal-morpholino phosphazene (1c), whilst the reactions of 2a and 3a give diethylaminotrimorpholino (2c) and fully substituted morpholino products (3c), respectively. The structural investigations of the compounds are examined by Fourier transform IR, MS, ¹H, ¹³C, ³¹P NMR, DEPT, HETCOR, and HMBC techniques. The crystal structures of 3b and 3c are determined using X-ray crystallography. Cyclic voltammetric and chronoamperometric data show that compounds 1a–3a, 1b–3b, and 1c–3c exhibit electrochemically reversible one-electron oxidation of Fc redox centers which are hardly affected by the substituents on the phosphazene ring. The compounds 1b, 2b, 3b, and 3c are screened for antibacterial activities against Gram-positive and Gram-negative bacteria and for antifungal activities against yeast strains. In addition, the antituberculosis activities (in vitro) of these compounds are evaluated against INH-susceptible reference strain M. tuberculosis H37Rv, and six multi-drug resistant clinical M. tuberculosis isolates. Compound 2b is found to be the most active against the susceptible the reference strain. In addition, 1b, 2b, and 3c are active against all the multidrug-resistant clinical isolates at the highest concentrations. Gel electrophoresis data indicate that the compounds promote the formation of strand breaks in plasmid DNA. Almost all the concentrations lost of supercoiled DNA suggests that the compound 3b is very efficient plasmid-modifier. The compounds inhibit BamHI cleavage of pUC18 DNA while restricting HindIII.     

p-Cymene ruthenium thioether complexes

Thioethers PhC₂H₄SMe, PhC₃H₆SⁱPr and MeSAllyl form substitutionally labile monomeric adducts (p-cymene)RuCl₂(SRR′) (2a-c) upon treatment with the {(p-cymene)RuCl₂}₂ dimer (p-cymene = η⁶-MeC₆H₄ⁱPr-1,4). Pure adducts were obtained by crystallization from CH₂Cl₂/Et₂O, and 2a,c as well as the bis(thioether) complex (3) were studied by X-ray crystallography. The trichloro bridged diruthenium complex is formed as a byproduct in the preparation of 3 and was also crystallographically characterized. In solution, pure samples 2a-c equilibrate with free thioether and the dimeric starting complex 1. The amount of 1 present in these mixtures increases with increasing bulk of the thioether substituents. Attempts to thermally replace the cymene ligand by the dangling arene substituent of the thioether ligand of 2a,b failed. Complexes 2a-c as well as the dimethylsufide derivative 2d were studied by cyclic voltammetry and display a close to reversible (2a,c,d) or partially reversible (2b) oxidation near +0.85 V and an irreversible reduction at rather negative potential. New peaks observed after oxidation and reduction point to dissociation of the thioether ligand as the main decomposition pathway of the associated radical cations and anions.     

Syntheses and crystal structures of azafulleroid and aziridinofullerene bearing silyl or germyl benzene

Addition of silyl and germylmethyl azides (1) to fullerene C₆₀ at 50 °C through [2+3] cycloaddition led to the formation of the triazoline adducts (2). Subsequently, heating 2 at 100 °C in the solid state, caused N₂ extrusion producing two different isomers, [5,6]-azafulleroid (3) and [6,6]-aziridinofullerene (4). The ¹³C NMR spectrum of 3 had an absence of resonances in the aliphatic region for the fullerene C₆₀ cage, showing a fulleroid with C_S symmetry. In contrast, 4 exhibited one sp³ resonance in the aliphatic region for the fullerene C₆₀ cage, indicative of an aziridinofullerene with C_2V symmetry. However, MALDI-TOF mass characterization was hampered because ion peaks corresponding to the bis-adduct are detected in positive ion mode measurements, whereas the ion peaks [M−N₂]⁻ for 2a as well as [M]⁻ for 3a and 4a are observed in negative ion measurements. In an effort to obtain X-ray data, silyl and germylphenyl groups were introduced to form intermolecular complexes with fullerene C₆₀. The X-ray structures of 3c and 3d revealed a strong enhancement of homoconjugation in the bridged annulene moiety based on POAV analysis. The X-ray structures of 3c,d and 4c were confirmed with the detection of silyl and germylphenyl-C₆₀ interactions, similar to dimethoxyphenyl-C₆₀ interactions.     

Platinum-catalyzed double silylations of alkynes with bis(dichlorosilyl)methanes

Bis(dichlorosilyl)methanes 1 undergo the two kind reactions of a double hydrosilylation and a dehydrogenative double silylation with alkynes 2 such as acetylene and activated phenyl-substituted acetylenes in the presence of Speier’s catalyst to give 1,1,3,3-tetrachloro-1,3-disilacyclopentanes 3 and 1,1,3,3-tetrachloro-1,3-disilacyclopent-4-enes 4 as cyclic products, respectively, depending upon the molecular structures of both bis(dichlorosilyl)methanes (1) and alkynes (2). Simple bis(dichlorosilyl)methane (1a) reacted with alkynes [R¹-CC-R²: R¹ = H, R² = H (2a), Ph (2b); R¹ = R² = Ph (2c)] at 80 °C to afford 1,1,3,3-tetrachloro-1,3-disilacyclopentanes 3 as the double hydrosilylation products in fair to good yields (33-84%). Among these reactions, the reaction with 2c gave a trans-4,5-diphenyl-1,1,3,3-tetrachloro-1,3-disilacyclopentane 3ac in the highest yield (84%). When a variety of bis(dichlorosilyl)(silyl)methanes [(Me_nCl_3 − nSi)CH(SiHCl₂)₂: n = 0 (1b), 1 (1c), 2 (1d), 3 (1e)] were applied in the reaction with alkyne (2c) under the same reaction conditions. The double hydrosilylation products, 2-silyl-1,1,3,3-tetrachloro-1,3-disilacyclopentanes (3), were obtained in fair to excellent yields (38-98%). The yields of compound 3 deceased as follows: n = 1 > 2 > 3 > 0. The reaction of alkynes (2a-c) with 1c under the same conditions gave one of two type products of 1,1,3,3-tetrachloro-1,3-disilacyclopentanes 3 and 1,1,3,3-tetrachloro-1,3-disilacyclopent-4-enes (4): simple alkyne 2a and terminal 2b gave the latter products 4ca and 4cb in 91% and 57% yields, respectively, while internal alkyne 2c afforded the former cyclic products 3cc with trans form between two phenyl groups at the 3- and 4-carbon atoms in 98% yield, respectively. Among platinum compounds such as Speier’s catalyst, PtCl₂(PEt₃)₂, Pt(PPh₃)₂(C₂H₄), Pt(PPh₃)₄, Pt[ViMeSiO]₄, and Pt/C, Speier’s catalyst was the best catalyst for such silylation reactions.     

Reactions of trimethylsiloxychlorosilanes with lithium metal - On the mechanism of the formation of trimethylsiloxysilyllithium compounds LiSiRR’(OSiMe3)

The reaction pathway for the formation of the trimethylsiloxysilyllithium compounds (Me₃SiO)RR′SiLi (2a: R = Et, 2b: R = ⁱPr, 2c: R = 2,4,6-Me₃C₆H₂ (Mes); 2a-c: R′ = Ph; 2d: R = R′ = Mes) starting from the conversion of the corresponding trimethylsiloxychlorosilanes (Me₃SiO)RR′SiCl (1a-d) in the presence of excess lithium in a mixture of THF/diethyl ether/n-pentane at −110 °C was investigated.The trimethylsiloxychlorosilanes (Me₃SiO)RPhSiCl (1a: R = Et, 1b: R = ⁱPr, 1c: R = Mes) react with lithium to give initially the trimethylsiloxysilyllithium compounds (Me₃SiO)RPhSiLi (2a-c). These siloxysilyllithiums 2 couple partially with more trimethylsiloxychlorosilanes 1 to produce the siloxydisilanes (Me₃SiO)RPhSi-SiPhR(OSiMe₃) (Ia-c), and they undergo bimolecular self-condensation affording the trimethylsiloxydisilanyllithium compounds (Me₃SiO)RPhSi-RPhSiLi (3a-c). The siloxydisilanes I are cleaved by excess of lithium to give the trimethylsiloxysilyllithiums (Me₃SiO)RPhSiLi (2). In the case of the two trimethylsiloxydisilanyllithiums (Me₃SiO)RPhSi-RPhSiLi (3a: R = Et, 3b: R = ⁱPr) a reaction with more trimethylsiloxychlorosilanes (Me₃SiO)RPhSiCl (1a, 1b) takes place under formation of siloxytrisilanes (Me₃SiO)RPhSi-RPhSi-SiPhR(OSiMe₃) (IIa: R = Et, IIb: R = ⁱPr) which are cleaved by lithium to yield the trimethylsiloxysilyllithiums (Me₃SiO)RPhSiLi (2a, 2b) and the trimethylsiloxydisilanyllithiums (Me₃SiO)RPhSi-RPhSiLi (3a, 3b). The dimesityl-trimethylsiloxy-silyllithium (Me₃SiO)Mes₂SiLi (2d) was obtained directly by reaction of the trimethylsiloxychlorosilane (Me₃SiO)Mes₂SiCl (1d) and lithium without formation of the siloxydisilane intermediate. Both silyllithium compounds 2 and 3 were trapped with HMe₂SiCl giving the products (Me₃SiO)RR′Si-SiMe₂H and (Me₃SiO)RPhSi-RPhSi-SiMe₂H.     

Synthesis and properties of bis(heteroazulen-3-yl)methyl cations and bis(heteroazulen-3-yl)ketones

The synthesis and properties of a novel type of bis(heteroazulen-3-yl)methyl cations, bis(2-oxo-2H-cyclohepta[b]furan-3-yl)methyl cation salt and nitrogen analogues, (9a-c·PF₆⁻) and (9a-c·BF₄⁻), as well as bis(heteroazulen-3-yl)ketones (12a-d) are studied. The synthetic method was based on a TFA-catalyzed electrophilic aromatic substitution on the heteroazulenes (6a-d) with paraformaldehyde to afford the corresponding disubstituted methane derivatives 7a-d, followed by oxidative hydrogen abstraction with DDQ, and subsequent exchange of the counter-anion by using aq. HPF₆ or aq. HBF₄. In addition, the reaction of 7a-d with 2.2 equiv. amounts of DDQ afforded carbonyl compounds 12a-d. The delocalization of the positive charge of 9a-c was evaluated by the ¹H and ¹³C NMR spectral data. The thermodynamic stability of cations 9a-c was evaluated to be in the order 9a<9b<9c on the basis of their reduction potentials measured by cyclic voltammetry (CV) and pK_R+ values (2.6-10.3) obtained spectrophotometrically. The reduction waves of cations 9a-c were irreversible, suggesting the dimerization of the radical species generated by one-electron reduction. This was demonstrated by the reduction of 9a·BF₄⁻ with Zn powder to give dimerized product 14a. In addition, the quenching of 9a·BF₄⁻ with MeOH/NaHCO₃ gives ether derivative 15a, which is proposed for the precursor for synthesizing tris(heteroazulene)-substituted methyl cations bearing two different heteroazulene-units.     

Hydrothermal syntheses and structures of the uranyl tellurates AgUO2(HTeO5) and Pb2UO2(TeO6)

Two uranyl tellurates, AgUO₂(HTeO₅) (1) and Pb₂UO₂(TeO₆) (2), were synthesized under hydrothermal conditions and were structurally, chemically, and spectroscopically characterized. 1 crystallizes in space group Pbca, a=7.085(2) Å, b=11.986(3) Å, c=13.913(4) Å, V=1181.5(5) Å³, Z=8; 2 is in P2(1)/c, a=5.742(1) Å, b=7.789(2) Å, c=7.928(2) Å, V=90.703(2) Å³, and Z=2. These are the first structures reported for uranyl compounds containing tellurate. The U⁶⁺ cations are present as (UO₂)²⁺ uranyl ions that are coordinated by O atoms to give pentagonal and square bipyramids in compounds 1 and 2, respectively. The structural unit in 1 is a sheet consisting of chains of edge-sharing uranyl pentagonal bipyramids that are one bipyramid wide, linked through the dimers of TeO₆ octahedra. In 2, uranyl square bipyramids share each of their equatorial vertices with different TeO₆ octahedra, giving a sheet with the autunite-type topology. Sheets in 1 and 2 are connected through the low-valence cations that are located in the interlayer region. The structures of 1 and 2 are compared to those of uranyl compounds containing octahedrally coordinated cations.     

Further studies of tetrakis(N,N′-dialkylbenzamidinato)diruthenium(III) chloro and alkynyl compounds: molecular engineering of metallayne monomers

Three diruthenium(III) compounds Ru₂(L)₄Cl₂, where L is mMeODMBA (N,N′-dimethyl-3-methoxybenzamidinate, 1a), DiMeODMBA (N,N′-dimethyl-3,5-dimethoxy benzamidinate, 1b), or DEBA (N,N′-diethylbenzamidinate, 1c), were prepared from the reactions between Ru₂(OAc)₄Cl and respective HL under reflux conditions. Metathesis reactions between 1 and LiC₂Y resulted in bis-alkynyl derivatives Ru₂(L)₄(C₂Y)₂ [Y=Ph (2), SiMe₃ (3), SiⁱPr₃ (4) and C₂SiMe₃ (5)]. The parent compounds 1 are paramagnetic (S=1), while bis-alkynyl derivatives 2-5 are diamagnetic and display well-solved ¹H- and ¹³C-NMR spectra. Molecular structures of compounds 1b, 1c, 2c, 3c and 4b were established through single crystal X-ray diffraction studies, which revealed RuRu bond lengths of ca. 2.32 Å for parent compounds 1 and 2.45 Å for bis-alkynyl derivatives. Cyclic voltammograms of all compounds feature three one-electron couples: an oxidation and two reductions, while the reversibility of observed couples depends on the nature of axial ligands.     

A NMR, X-ray, and DFT combined study on the regio-chemistry of nucleophilic addition to platinum(II) coordinated terminal olefins

The series of platinum complexes [PtCl(η²-CH₂CH-C₆H₄-X)(tmeda)](ClO₄) (X = H, 1b; 4-OMe, 1c; 3-OMe, 1d; 4-CF₃, 1e; 3-CF₃, 1f; 3-NO₂, 1g; tmeda = N,N,N′,N′-tetramethyl-1,2-ethanediamine) has been considered. In the styrene complex (1b) both solution (NMR) and solid state (X-ray) data indicate a significant difference in the Pt-C bond lengths (the longer bond being that involving the olefin carbon atom carrying the phenyl ring). Such a difference increases when X is an electron donor group (EDG, 1c) and decreases when X is an electron withdrawing group (EWG, 1d-g). The attack of a nucleophile (MeO⁻) to the substituted carbon (Markovnikov type, M) is by far the most favoured in the case of unsubstituted (1b) or EDG-substituted (1c) styrenes. The presence of an EWG (compounds 1d-g) levels off the probability of M and anti-M type of attack. DFT calculations on 1b,c and 1e were also performed. The NLMO analysis reveals the crucial role of the interaction between the filled π orbital of the olefin and the empty d orbital of platinum; the carbon with greater electron density becoming less susceptible of nucleophilic attack.     

The reactivity of TMSN3 with ruthenium cyclopropenyl complexes containing different ligands and different substituent at Cγ

Ruthenium vinylidene complexes 2a-2c containing indenyl and bidentate dppe ligands can be obtained in efficient yields. Treatment of the cationic ruthenium vinylidene complexes with n-Bu₄NOH in acetone yields the neutral cyclopropenyl products (η⁵-C₉H₇)(dppe)Ru-CC(Ph)CHR (3) (3a, R = Ph; 3b, R = CN; 3c, R = p-C₆H₄-CN) via the deprotonation reaction. Reaction of complexes 3a and 3c with Me₃SiN₃ (TMSN₃) the N-coordinated complexes 4a and 4c can be obtained as stable products. Complex 3b containing CN group at Cγ in the cyclopropenyl ring reacts with TMSN₃ yielded the tetrazolate complex 5b. Similar cyclopropenyl products containing indenyl and two triphenylphosphine ligands 3′ can also be synthesized. Reaction of complex 3b′ with TMSN₃ also yielded the tetrazolate complex as the major product. And the minor products are [Ru]-N₃ and organic compound 6b. Reaction of 3a′ and 3c′ with TMSN₃ yielded [Ru]-N₃. The corresponding organic products can also be obtained via the N₃⁻ attacking the metal center in the N-coordinated complexes 4a′ and 4c′.     

Solvothermal syntheses, and characterization of [Ln(en)4(SbSe4)] (Ln=Ce, Pr) and [Ln(en)4]SbSe4·0.5en (Ln=Eu, Gd, Er, Tm, Yb): The effect of lanthanide contraction on the crystal structures of lanthanide selenidoantimonates(V)

Two types of lanthanide selenidoantimonates [Ln(en)₄(SbSe₄)] (Ln=Ce(1a), Pr(1b)) and [Ln(en)₄]SbSe₄·0.5en (Ln=Eu(2a), Gd(2b), Er(2c), Tm(2d), Yb(2e); en=ethylenediamine) were solvothermally synthesized by reactions of LnCl₃, Sb and Se with the stoichiometric ratio in en solvent at 140 °C. The four-en coordinated lanthanide complex cation [Ln(en)₄]³⁺ formed in situ balances the charge of SbSe₄³⁻ anion. In compounds 1a and 1b, the SbSe₄³⁻ anion act as a monodentate ligand to coordinate complex [Ln(en)₄]³⁺ and the neutral compound [Ln(en)₄(SbSe₄)] is formed. The Ln³⁺ ion has a nine-coordinated environment involving eight N atoms and one Se atom forming a distorted monocapped square antiprism. In 2a-2e the lanthanide(III) ion exists as isolated complex [Ln(en)₄]³⁺, in which the Ln³⁺ ion is in a bicapped trigonal prism geometry. A systematic investigation of the crystal structures reveals that two types of structural features of these lanthanide selenidoantimonates are related with lanthanides contraction across the lanthanide series. TG curves show that compounds 1a-1b and 2a-2e remove their organic components in one and two steps, respectively.     

C11H12 Hydrocarbons—II : Preparation of tricyclo[5.4.0.0]undeca-3,8,10-triene a norbornenone route from cycloheptatriene

A stereoselective 6-step synthesis of the C₁₁H₁₂ hydrocarbon cis,anti,cis-tricyclo[5.4.0.0^2,5]undeca-3,8,10-triene (2a) is described. The dichloro compound 3c was prepared by the selective reduction of 3a with chromous perchlorate-ethylenediamine complex, a general reagent for this type of transformation. Irradiation of 3c produced 6a and 7a in ∼ 7:1 ratio. Reduction of the mixture with sodium produced ketal mixture 6b and 7b. The ketals were hydrolyzed to ketones 6c and 7c and the ketones decarbonylated to 2a and an isomeric hydrocarbon tentatively assigned as homobasketene 2b′. Hydrocarbon 2a was readily obtained pure by a silver nitrate extraction procedure and 2b′ by preparative VPC. It was shown that pure 6c gives only 2a and therefore, 7c is the source of 2b′. The stereochemical assignments, based on both spectral and chemical evidence, are discussed.     

The (phosphino)tetraphenylborate ligand in ruthenium-arene chemistry

The synthesis of a series of anionic half-sandwich ruthenium-arene complexes [E][RuCl₂(η⁶-p-cymene){PR₂(p-Ph₃BC₆H₄)}] (E = Bu₄N⁺: R = Ph, 1a, ⁱPr, 1b or Cy, 1c; E = bis(triphenylphosphine)iminium or PNP⁺: R = Ph, 1a′, ⁱPr, 1b′ or Cy, 1c′) are reported. X-ray crystallographic studies of 1a′ and 1b′ confirmed the three-legged piano-stool coordination geometry. In solution, complexes 1a-c and 1a′-c′ are proposed to form monomer-dimer equilibria as a result of chloride ligand dissociation. Complexes 1a-c and 1a′-c′ also form the formally neutral zwitterionic complexes [RuCl(L)(η⁶-p-cymene){PR₂(p-Ph₃BC₆H₄)}] (L = pyridine: R = Ph, 2a, ⁱPr, 2b or Cy, 2c; L = MeCN: R = Ph, 3a, ⁱPr, 3b or Cy, 3c) via chloride ligand abstraction using AgNO₃ or MeOTf.     

Synthesis of the 5-hydroxymethyl-6-aryl-8-oxabicyclo[3.2.1]oct-3-en-2-one natural products descurainin and cartorimine

Reaction of pyranulose 6 with styrenes 12c or 13 and Et₃N in CH₂Cl₂ at 25 °C afforded the [5+2] cycloadducts 14c and 15, which were hydrolyzed to give the natural products 1 and descurainin (2) in 24 and 27% overall yield, respectively. Heating pyranulose 6 with cinnamate ester 21 in the presence of 2,6-di-t-butylpyridine in CH₃CN at 175 °C afforded the [5+2] cycloadduct, which was hydrolyzed to give cartorimine (3) in 13% yield.     

Novel photo-induced oxidative cyclization of 1,3-dimethyl-5-(1-arylmethylidene)pyrimidine-2,4,6(1,3,5H)-triones: synthesis and properties of areno[5,6]pyrano[2,3-d]pyrimidine-2,4(1,3H)-dionylium ions and their photo-induced autorecycling oxidizing reaction toward some amines

Novel photo-induced oxidative cyclization was accomplished to synthesize areno[b]pyrimido[5,4-e]pyran-2,4(1,3H)-dionylium ions 13a-c⁺·ClO₄⁻. Furthermore, 13a-c⁺·BF₄⁻ and their phenyl-substituted derivatives 19a,b⁺·BF₄⁻ were alternatively synthesized by the reaction of salicylaldehyde and its naphthyl derivatives with barbituric acids and subsequent treatment with aq. HBF₄. Structural characteristics of 13a-c⁺ and 19a,b⁺ were clarified on inspection of the UV-vis and NMR spectral data as well as X-ray crystal analyses. The electrochemical properties were studied by the CV measurement. In a search for reactivity, reactions of 13a-c⁺·BF₄⁻ with some nucleophiles, hydride, benzylamine, and H₂O, were also carried out. The photo-induced autorecycling oxidation reactions of 13a-c⁺·BF₄⁻ toward some amines under aerobic conditions were carried out to give the corresponding imines (isolated by converting to the corresponding 2,4-dinitrophenylhydrazones) in 643-3600% yield (recycling number of 13a-c⁺·BF₄⁻: 6.4-36.0).