Spectrophotometric analysis of 5-coordinate cobalt(II) species for ligand substitution of hexakis(acetonitrile)cobalt(II) with bulky 1,1,3,3-tetramethylurea in noncoordinating nitromethane.

The ligand substitution reaction of [Co(an)6]2+ (an = acetonitrile) with 1,1,3,3-tetramethylurea (TMU) in the noncoordinating solvent, nitromethane, was spectrophotometrically investigated by titration. The observed spectral changes were analyzed using a model with the four steps of ligand substitution. The component complexes involved in the substitution were found to be 6-coordinate [Co(an)6]2+ and [Co(an)5(tmu)]2+, 5-coordinate [Co(an)3(tmu)2]2+ and [Co(an)2(tmu)3]2+, and 4-coordinate [Co(tmu)4]2+. The logarithmic values of the stepwise equilibrium constant are 2.17 +/- 0.26, 1.06 +/- 0.15, 1.19 +/- 0.06, and -0.4 +/- 0.4 at 25 degrees C. The decrease in the coordination number of the Co(II) ion from 6 to 5 during the formation of [Co(an)3(tmu)2]2+ and from 5 to 4 during the formation of [Co(tmu)4]2+ is ascribed to the steric repulsion between the coordinating bulky TMU molecules.     

Cycloadditions of 1-iminylphosphirane complexes with allenes

A cascade carbonylative ring expansion and [2+2]/[4+2] cycloaddition of strained 1-iminylphosphirane complexes with aryl allenes were reported.The carbonylative ring expansion of 1-iminylphosphirane complexes provides an azaphosphacyclohexone complex intermediate with a C=P double bond.The following [2+2] or dearomatic [4+2] cycloaddition of this intermediate with allenes is modulated by the aryl substituents on the imino carbon.The regioselective [2+2] cycloaddition with 1,1-diarylallene provides an entry to bicyclo[4.2.0]octan-4-one skeletons featuring a four-membered phosphacyclobutane moiety.While dearomatic [4+2] cycloaddition was preferred with less aromatic naphthalene and yielded octahydrochrysene skeleton containing heteroatoms.     

Proton-induced cis-trans conversion of a platinum(II) center coordinated by L-cysteinatocobalt(III) metalloligands

Treatment of LambdaL-[Co(L-cys-N,S)(en)2]+ (l-H2cys = L-cysteine) with [PtCl4]2- in water, followed by the addition of acid, gave an S-bridged CoIII2PtII trinuclear complex ([1]4+), which was reversibly converted to its deprotonated complex ([2]2+) in an aqueous solution. While [1]4+ formed only a trans isomer, [2]2+ existed as a mixture of trans and cis isomers. The selective formation of a cis isomer was achieved by treatment of [1]4+ or [2]2+ with phthalic acid in water, which afforded a unique CoIII4PtII2 hexanuclear complex ([3]4+). Complex [3]4+ was reverted back to [1]4+ by treatment with aqueous HCl, accompanied by the complete cis-to-trans conversion.     

Unexpected evolution of optical properties in Ir-Pt complexes upon repeat unit increase: towards an understanding of the photophysical behaviour of organometallic polymers

The photophysical properties of [Ir]-[Pt]-[Ir]-[Pt]-[Ir] ([Ir] = [Ir(ppy)(2)(bpy*)](+) ([Pt] = trans-Pt(PBu(3))(2)(C≡C)(2); ppyH = 2-phenylpyridine); bpy* = bipyridyl;) reveal an unprecedented triplet energy transfer from the terminal iridiums to the central Ir subunit.     

Influence of steric confinement within zeolite Y on photoinduced energy transfer between [Ru(bpy)3]2+ and iron polypyridyl complexes

The spectroscopic and photophysical properties of zeolite-Y-entrapped [Ru(bpy)3]2+ co-doped with either [Fe(bpy)3]2+ or [Fe(tpy)2]2+ over a range of iron complex loadings are presented. In solution, [Ru(bpy)3]2+ undergoes efficient bimolecular energy transfer to [Fe(bpy)3]2+, whereas only radiative or trivial energy transfer occurs between [Ru(bpy)3]2+ and [Fe(tpy)2]2+. In sharp contrast, within zeolite Y, both [Fe(bpy)3]2+ and [Fe(tpy)2]2+ were found to effectively quench the donor emission. Fitting the Perrin model to the photophysical data yields an effective quenching radius of 32 and 27 A, respectively, for [Fe(bpy)3]2+ and [Fe(tpy)2]2+. The long-range nature of the quenching suggests F?rster energy transfer. Detailed spectroscopic investigations indicate that [Fe(tpy)2]2+ bound within zeolite Y undergoes significant distortion from octahedral geometry. This distortion results in increased oscillator strength and enhanced spectral overlap, between the [Ru(bpy)3]2+ (3)d pi-pi* donor emission and the co-incident acceptor (1)T2-(1)A1 ligand field absorption compared with solution. This turns on an efficient energy transfer to [Fe(tpy)2]2+ within the confinement of the zeolite Y supercage. Overall, this is an interesting example of the ability of the zeolite environment to provoke new photophysical processes not possible in solution.     

Photoaddition reactions of acetylene and butadiyne derivatives to benzodithiophene

The photochemical [2pi +2pi] cycloaddition of dimethyl acetylenedicarboxylate to benzo[1,2-b:4,5-b']dithiophene has been used to synthesize substituted cyclobuta[b]thieno[2,3-f][1]benzothiophene. The first [2pi + 2pi] photocycloaddition reaction of a series of butadiynes to benzodithiophene is reported to yield regioselective and acetylene-substituted cyclobutene derivatives containing an aromatic thiophene moiety.     

Synthesis, characterization, and chiral properties of CoIII2AgI3 pentanuclear, CoIII4ZnII4 octanuclear, and CoIII mononuclear complexes with aza-capped hexadentate-N3S3 thiolate ligands: crystal structures of

The reaction of an S-bridged Co2(III)Ag3(I) pentanuclear complex, [Ag3[Co(aet)3]2][BF4]3 (aet = NH2CH2CH2S-), with paraformaldehyde in basic acetonitrile, followed by adding aqueous ammonia, produced an aza-capped Co2(III)-Ag3(I) complex, [Ag3[Co(L)]2]3+ ([1]3+) (L = N(CH2NHCH2CH2S-)3). The crystal structure of [1]3+ was determined by X-ray crystallography. [1][PF6]3 x H2O, empirical formula C18H44Ag3Co2F18N8OP3S6, crystallizes in the tetragonal space group 142m with a = 13.012(1) A, c = 24.707(2) A, and Z = 4. In [1]3+ the two aza-capped [Co(L)] units are linked by three Ag(I) atoms, such that the two Co(III) atoms are encapsulated in a macrobicyclic metallocage, [Ag3(I)(L)2]3-. [1]3+ was converted to an aza-capped Co4(III)Zn4(II) octanuclear complex, [Zn4O[Co(L)]4]6+ ([2]6+), by reaction with I- in the presence of Zn2+ and ZnO in water. The crystal structure of [2]6+ was also determined by X-ray crystallography. [2][PF6]6 x 8H2O, empirical formula C36H100Co4F36N16O9P6S12Zn4, crystallizes in the monoclinic space group P2(1/n) with a = 14.33(7) A, b = 25.67(10) A, c = 24.83(6) A, beta = 101.3(3) degrees , and Z = 4. In [2]6+ each of four [Co(L)] units is bound to each trigonal Zn3(II) face of the tetrahedral [Zn4(II)O]6+ core, such that each Co(III) atom is encapsulated in a macrobicyclic [Zn4(II)O(L)] fragment. Treatment of [2]6+ with a basic aqueous solution resulted in a cleavage of the Zn-S bonds to produce an aza-capped Co(III) mononuclear complex, [Co(L)] ([3]), from which [1]3+ is readily reproduced by the reaction with Ag+ in water. All the reactions were found to proceed with retention of the absolute configuration (delta or lambda) of the Co(III) chiral centers; deltadelta-[1]3+, deltadeltadeltadelta-[2]6+, and A-[3] were derived from deltadelta-[Ag3[Co(aet)3]2]3+. The contributions to circular dichroism (CD) from the triple helicity in [1]3+, besides from the asymmetric N and S donor atoms and the Co(III) chiral centers in [1]3+ and [2]6+, were estimated by comparing the CD spectra of deltadelta-[1]3+, deltadeltadeltadelta-[2]6+, and delta-[3].     

Preparations of 2-azabicyclo[2.2.2]octa-5,7-dien-3-ones and 7-azabicyclo[4.2.0]octa-2,4-dien-8-ones from addition reactions of 2-pyridones

The low temperature photoaddition of 2-pyridone with dimethyl acetylenedicarboxylate gave a [4 + 2]-cycloadduct and a [2 + 2]-cycloadduct across the 5,6-position of 2-pyridone. Their formations were competing with a Michael reaction of the two substrates at the room temperature reaction. The reactions of other pyridones with dimethyl acetylenedicarboxylate gave [2 + 2]- and/or [4 + 2]-cycloadducts. The [2 + 2]-cycloadducts underwent an intriguing rearrangement to fused β-lactams.     

四氮杂杯[2]芳烃[2]三嗪的合成及其叠氮化

以简单易得的原料、在温和的条件下高产率地合成了氮原子桥连杯[2]芳烃[2]三嗪化合物．室温下,碳酸钾为缚酸剂,利用三聚氯氰和对苯二胺的亲核取代反应合成主体,并首次将其叠氮化,反应温度为40℃．产物通过元素分析,红外光谱和氢谱对其结构进行表征．从而验证了合成路线的可行性,并得出了较佳的工艺条件．     

Evidence from Mössbauer spectroscopy for distinct [2Fe-2S](2+) and [4Fe-4S](2+) cluster binding sites in biotin synthase from Escherichia coli

Biotin synthase is an AdoMet-dependent radical enzyme that catalyzes the insertion of an FeS cluster-derived sulfur atom into dethiobiotin. The dimeric enzyme is purified containing one [2Fe-2S]2+ cluster per monomer, but it is most active when reconstituted with an additional [4Fe-4S]2+ cluster per monomer. Using M?ssbauer spectroscopy coupled with differential reconstitution of each cluster with 57Fe, we show that the reconstituted enzyme has approximately 1:1 [2Fe-2S]2+ and [4Fe-4S]2+ clusters and that the [4Fe-4S]2+ cluster is assembled at an alternate site not previously occupied by the [2Fe-2S]2+ cluster. These data suggest that biotin synthase is evolved to simultaneously accommodate two different clusters with unique roles in catalysis.     

Utilization of a Crown Ether/Amine‐Type Rotaxane as a Probe for the Versatile Detection of Anions and Acids by Thin‐Layer Chromatography

A crown ether/amine‐type [2]rotaxane was synthesized and utilized as a probe for the detection of acids and anions. The addition of acids to the amine‐type [2]rotaxane solution generated corresponding crown ether/ammonium‐type [2]rotaxanes, which were purified by silica gel column chromatography as ammonium salts. The isolated yields of the [2]rotaxanes, possessing a variety of anions, depended on the acidity and polarity of the counter anions. The behaviours of the ammonium‐type [2]rotaxanes on thin‐layer chromatography (TLC) silica gel reflected the properties of the counter anions. The treatment of the amine‐type [2]rotaxane with acids afforded the corresponding ammonium‐type [2]rotaxanes bearing several different anions. The ammonium‐type [2]rotaxanes behaved similarly to the purified [2]rotaxanes on the TLC silica gel. Furthermore, we succeeded in the analysis of anions using mixtures of the amine‐type [2]rotaxane and salts in an appropriate solvent. We demonstrated the detection of anions by the combination of TLC and the utilization of the [2]rotaxane probe.     

夹心化合物［C_5HMe_4］_2TiCl_2的合成及谱学表征

用四甲基环戊二烯基［Ｃ_５ＨＭｅ_４］~－为配体合成了夹心化合物［Ｃ_５ＨＭｅ_４］_２ＴｉＣｌ_２，通过核磁共振、质谱、红外光谱、拉曼光谱等多种谱学方法对该化合物进行了结构表征，实验结果表明［Ｃ_５ＨＭｅ_４］_２ＴｉＣｌ_２中两个［Ｃ_５ＨＭｅ_４］~－配体对称分布在Ｔｉ（Ⅳ）两侧，整个分子具有Ｃ_２ｖ对称性，呈覆盖型结构。     

Synthesis and structures of an unusual germanium(II) calix[4]arene complex and the first germanium(II) calix[8]arene complex and their reactivity with diiron nonacarbonyl

The protonolysis reaction of the germanium(II) amide Ge[N(SiMe3)2]2 with calix[4]arene and calix[8]arene furnishes the two germanium(II) calixarene complexes {calix[4]}Ge2 and {calix[8]}Ge4, respectively, which have been crystallographically characterized. The calix[4]arene complex contains a Ge2O2 rhombus at the center of the molecule and is one of the only four germanium(II) calix[4]arenes that have been structurally characterized. The calix[8]arene species is the first reported germanium calix[8]arene complex, and it exhibits an overall bowl-shaped structure which contains two Ge2O2 fragments. The latter complex reacts with Fe2(CO)9 to yield an octairon compound, which has also been structurally characterized and contains four GeFe2 triangles arranged around the macrocyclic ring. The germanium(II) centers are oxidized to germanium(IV) in this process, with concomitant reduction of the neutral diiron species to Fe2(CO)(8)2- anions.     

A new approach to functionalize an organic compound through the influence of metal bis(dithiolene) complexes leading to ion-pair compounds exhibiting strong emission at room temperature in the visible region

The facile oxidation of 6,12-dihydrodipyrido [1,2-alpha1',2'-d] pyrazidinium (DDP2+ = [C12H12N2]2+) chloride to cyclic quaternary ammonium monocation, 12-oxo-9H-dipyrido[1,2-alpha;1',2'-d]pyrazin-5-ium (ODP1+ = [C12H9N2O]1+) is achieved when it reacts with [M(mnt)2]2- (M=Ni2+ and Cu2+) resulting in the formation of the ion pair compounds [ODP]2[Ni(mnt)2] (1) and [ODP]2[Cu(mnt)2] (2), respectively (see Scheme 1 for the structures of [ODP]1+ and [DDP]2+). The nickel complex 1 exhibits intense emission at room temperature in the visible region, whereas, in the case of copper analogue 2, the emission gets quenched. The oxo cation ODP (known to be an unstable species and never characterized unequivocally before) is stabilized in 1 and 2 by cation-anion interactions.     

Uranium halide complexes in ionic liquids: an electrochemical and structural study

The electrochemistry of the salts, [emim]2[UBr6] and [emim]2[UO2Br4] ([emim] = 1-ethyl-3-methylimidazolium), has been investigated in both a basic and an acidic bromoaluminate(III) ionic liquid. In the basic ionic liquid, the hexabromo salt undergoes a one-electron reversible reduction process at a stationary glassy carbon disc electrode, while the tetrabromodioxo salt was reduced to a uranium(IV) species by an irreversible two-electron process with the simultaneous transfer of oxide to the ionic liquid. On the other hand, dissolution of either of the salts in an acidic bromoaluminate(III) ionic liquid resulted in the formation of the same electroactive species. The solid state structures of the uranium chloride salts, [emim]2[UCl6] and [emim]2[UO2Cl4], have previously been reported, but have now been re-evaluated using a new statistical model developed in our group, to determine the presence or absence of weak hydrogen bonding interactions in the crystalline state.     

Cu-ZSM-5分子筛上[Cu-O-Cu]~(2 )物种的原位红外光谱研究

通过原位监测Cu－ZSM－5分子筛的振动红外光谱随温度及不同处理条件的变化情况，观察到［Cu－O－Cu］2＋物种的形成过程，即两个Cu（OH）＋在脱水过程中经二聚形成［Cu－O－Cu］2＋.低交换度样品开始产生［Cu－O－Cu］2＋物种所需脱水温度较高,通过观察不同处理条件对［Cu－O－Cu］2＋的影响，说明Cu2＋是通过脱出［Cu－O－Cu］2＋中的超晶格氧而被还原为Cu＋,较高温度时［Cu－O－Cu］2＋中的超晶格氧能与气相中的氧达到某种平衡.超晶格氧的脱出性能是影响Cu－ZSM－5分子筛上铜价态变化的重要因素．     

Cu-ZSM-5分子筛上[Cu-O-Cu]2+物种的原位红外光谱研究

通过原位监测Ｃｕ－ＺＳＭ－５分子筛的振动动红外光谱随温度及不同处理条件的变化情况,观察到［Ｃｕ－Ｏ－Ｃｕ］＾２＋物种的形成过程,即两个Ｃｕ（ＯＨ）＾＋在脱水过程中经二聚形成［Ｃｕ－Ｏ－Ｃｕ］＾２＋,低交换度样品开始产生［Ｃｕ－Ｏ－Ｃｕ］＾２＋物种所需脱水温度较高,通过观察不同处理条件对［Ｃｕ－Ｏ－Ｃｕ］＾２＋的影响,说明Ｃｕ＾２＋是通过脱出［Ｃｕ－Ｏ－Ｃｕ］＾２＋中的超各氧而被还原为Ｃｕ＾＋,较高     

Self-assembly and characterization of cyano-bridged bimetallic [Ln-Fe] and [Ln-Co] complexes (Ln = La, Pr, Nd and Sm). Nature of the magnetic interactions between the Ln(3+) and Fe(3+) ions

Two structural series, including seven isomorphous heterodinuclear complexes, [Ln(DMSO)4(H2O)3(mu-CN)M(CN)5].H2O ([La-Fe] (1), [Pr-Fe] (2), [Pr-Co] (3), [Nd-Fe] (4), [Nd-Co] (5), [Sm-Fe] (6) and [Sm-Co] (7)), and seven isostructural 2-D stair-like cyano-bridged bimetallic assemblies, [Ln(DMSO)2(H2O)(mu-CN)4M(CN)2]n ([La-Fe]n (8), [Pr-Fe]n (9), [Pr-Co]n (10), [Nd-Fe]n (11), [Nd-Co]n (12), [Sm-Fe]n (13) and [Sm-Co]n (14)) (DMSO = dimethylsulfoxide), have been rationally prepared by a facile approach, a ball-milling method, and characterized by X-ray diffraction and magnetic measurements. The isomorphous structures, in conjunction with the diamagnetism of the Co(3+) and La(3+) ions, allow an approximation to the nature of coupling between the iron(III) and lanthanide(III) ions in the Ln(3+)-Fe(3+) complexes. The Ln(3+)-Fe(3+) interaction is ferromagnetic for the dinuclear [Pr-Fe] (2), [Nd-Fe] (4), and [Sm-Fe] (6) systems and for the 2-D [Pr-Fe]n (9), [Nd-Fe]n (11), and [Sm-Fe]n (13) assemblies.     

气态[HPro（C1）]＋和[Sac]-相互作用及质子转移机制的理论研究

质子化功能离子液体在许多重要领域具有潜在的应用价值,然而人们对其相互作用模式、质子转移行为等方面的认识尚不清晰．本文利用DFT／B3LYP和MP2方法,以脯氨酸阳离子[HPro]＋、脯氨酸甲酯阳离子[HProC1]＋和糖精阴离子[Sac]=组成的质子化离子液体（PILs）为研究对象,探讨气态离子对、分子对、双聚体团簇中的结构单元及其作用模式．利用过渡态和内禀反应坐标（IRC）理论研究气态[HPro]＋[Sac]-和[HProCl]＋[Sac]-中的质子转移反应,AIM（atomsinmolecules）理论分析给出氢键相互作用本质等．计算结果表明,气态单聚体中氢转移能垒很小,体系中存在离子对和分子对的动态平衡．质子转移发生后,体系内部基本作用单元改变,作用强度下降,形成分子对的相互作用能量远远小于离子对的相互作用能量．双聚体团簇计算说明体系中没有质子转移反应发生,在[HPro]2＋[Sac]2-中相互作用的基本结构单元为离子、分子和两性离子,酯化后双聚体[HProC1]2＋[Sac]2-中全部为阴阳离子相互作用．质子转移反应、两性离子和酯化作用等的深入研究对于理解功能化PILs的性质、结构因素及其应用具有一定的实际意义．     

Hybrid molecular material exhibiting single-molecule magnet behavior and molecular conductivity

Two unique materials based on Mn4 single-molecule magnet (SMM) clusters (ST=9) and integer or non-integer average valent platinum maleonitriledithiolate (mnt2-) complexes, [{MnII2MnIII2(hmp)6(MeCN)2}{Pt(mnt)2}2][Pt(mnt)2]2.2MeCN (1) and [{MnII2MnIII2(hmp)6(MeCN)2}{Pt(mnt)2}4][Pt(mnt)2]2 (2), were synthesized by the material diffusion method and electrochemical oxidation, respectively (hmp-=2-hydroxymethylpyridinate). 1 and 2 are comprised of four and six [Pt(mnt)2]n- units, respectively, in addition to a common MnII2MnIII2 double-cuboidal unit, [MnII2MnIII2(hmp)6(MeCN)2]4+ (hereinafter [Mn4]4+). Among the [Pt(mnt)2]n- units, two units in 1 and four units in 2 are coordinated with the [Mn4]4+ unit, forming a 1D chain of {-[Mn4]-[Pt(mnt)2]2-} for 1 and a discrete subunit of {[Pt(mnt)2]2-[Mn4]-[Pt(mnt)2]2} for 2. The other two [Pt(mnt)2]n- units, occupying void space of the packing, form a stacking column with the coordinating [Pt(mnt)2]n- units, finally constructing hybrid frames of aggregates consisting of [Mn4]4+ units and [Pt(mnt)2]n- units. Electronic conductivity measurements revealed that 1 is an insulator and 2 is a semiconductor with sigma=0.22 S.cm(-1) at room temperature and an activation energy of 136 meV. Detailed magnetic measurements proved that the [Mn4]4+ units in 1 and 2 behave as SMMs with an ST=9 ground state at low temperatures. There is no significant interaction between [Mn4]4+ units and [Pt(mnt)2]n- units, but interactions between localized spins of [Pt(mnt)2]n- were detected even in 2 at low temperatures where the conductivity is electronically insulated. 2 is the first example of a hybridized material exhibiting SMM behavior and electronic conductivity.