Bismuth(III) bis(trifluoromethanesulfonyl)amide

Bismuth(III) bis(trifluoromethanesulfonyl)amide (Bi(NTf₂)₃, 3) has been prepared from the reaction of protiodemetallation of tri-p-tolylbismuth by a stoichiometric amount of bis(trifluoromethanesulfonyl)amine (1). The intermediates BiPh_3−n(NTf₂)_n (n=2 (4), 1 (5)) resulting from the reaction of 1 with triphenylbismuth have also been isolated. The amide 3 was able to catalyze the benzoylation and the benzenesulfonylation of toluene.     

双(三氟甲基磺酰)亚胺钠基聚合物电解质在固态钠电池中的性能

采用简单的溶液浇铸法制备出由双（三氟甲基磺酰）亚胺钠（NaTFSI）/聚氧乙烯（PEO）构筑的固态聚合物电解质（SPE）,并针对其相转变、结晶性、热稳定性、电导率以及电化学稳定性等基础理化及电化学性质进行了系统表征。结果表明,NaTFSI/PEO（[EO]/[Na⁺]=15）SPE具有相对高的电导率（σ ≈ 10^-3 S·cm^-1,80℃）、高的耐氧化能力（4.86 V vs Na⁺/Na）和热稳定性高达350℃。电池测试结果表明,该NaTFSI基SPE不仅对金属钠电极能够呈现出优异的界面稳定性,而且在Na|SPE|NaCu_1/9Ni_2/9Fe_1/3Mn_1/3O₂电池中展现出良好的循环和倍率性能。     

Infrared spectra of bis(trifluoromethanesulfonyl)imide based ionic liquids: Experiments and DFT simulations

We measured the far- and mid-infrared spectra of three ionic liquids having bis(trifluoromethanesulfonyl)imide anions and three different cations of the families of pyrrolidinium and ammmonium ions. The molecular vibrations of the individual ions were calculated by means of DFT theory at the B3LYP/6-31G** level: we found good agreement between the experimental and the computed frequencies. The infrared lines are ascribable to molecular vibrations of the single ions, suggesting an extremely weak interaction between anions and cations. The spectral lines found experimentally between 760 and 1050 cm⁻¹ are fingerprints for different cations. The comparison with the calculated frequencies allows the assignment of the experimental spectral lines to specific molecular vibrations of anions and for the first time of the specific cations of the measured ionic liquids.     

全氟烷基磺酰亚胺盐催化芳香化合物硝化反应的研究

利用系列全氟烷基磺酰亚胺盐[M(NPf₂)_n]作为一种新型的Lewis酸催化剂，用于催化芳香化合物与等摩尔65% (m∶m)硝酸的硝化反应. 通过考察不同的催化剂、反应时间、反应温度和反应介质效应等因素对甲苯硝化的影响，以及比较1 mol% Yb[N(C₄F₉SO₂)₂]₃催化不同结构的取代芳烃硝化反应的效果，表明全氟烷基磺酰亚胺盐不仅具有环境友好和原子经济的特点，而且是一类比常规Lewis酸更有效的、芳香化合物硝化反应的催化剂.     

全氟烷基磺酰亚胺配合物及其催化应用

介绍了全氟烷基磺酰亚胺(PFSI)配合物的结构、性质及制备,综述了一些全氟烷基磺酰亚胺配合物作为Lewis酸催化剂的最新应用进展,并对其催化应用前景进行了展望.     

Lanthanide bis(trifluoromethanesulfonyl)amides, synthesis, characterization and catalytic activity

The synthesis of lanthanum, neodymium and ytterbium bis(trifluoromethanesulfonyl)amides, named triflimidates, from acetates, carbonates and oxides is investigated. When the synthesis is performed in water, all the salts contain one molecule of water and the lanthanum and neodymium salts synthesized from the acetates also contain one molecule of acetic acid. After removal of the water and acetic acid in refluxing ethanol, the salts are obtained anhydrous but associated for lanthanum and neodymium, whereas the ytterbium salt is monomeric and volatile. When the synthesis is performed directly in ethanol, the neodymium salt contains two molecules of coordinated ethanol.In non-hazardous solvents, these triflimidates are better catalysts than the analogous triflates toward either Friedel-Crafts acylations, or Fries transpositions or Baeyer-Villiger oxidations. Unexpectedly, the cerium(IV) triflimidate catalyzes the oxidation of aromatic ketones to give the corresponding acids.     

A Detailed Study of the (Electro)chemical Behavior of Bis(trifluoromethanesulfonyl)imide Based Ionic Liquids at Different Purification Steps

A systematic investigation of the major impurities content as well as of their effect on the electrochemical behavior of synthesized N‐butyl‐N‐methylpyrrolidinium (Py_1.4), N‐(2‐methoxyethyl)‐N‐methylpyrrolidinium (Py_1.102) and 1‐butyl‐3‐methylimidazolium (bmim) bis(trifluoromethanesulfonyl)imide has been carried out and the efficacy of an optimized multistep purification protocol for obtaining ILs suitable for electrochemical applications has been verified.     

Synthesis and properties of alternating copolyamide‐imides based on 2,6‐bis(4‐aminophenoxy)naphthalene and comparison with its related isomeric polymers

A series of novel polyamide‐imides III containing 2,6‐bis(phenoxy)naphthalene units were synthesized by 2,6‐bis(4‐aminophenoxy)naphthalene and various bis(trimellitimide)s in N‐methyl‐2‐pyrrolidone (NMP) using triphenyl phosphite and pyridine as condensing agents through direct polycondensation. The polymers were obtained in quantitative yield with inherent viscosities up to 1.53 dL/g. Most of the polymers showed good solubility in NMP, N,N‐dimethylacetamide, N,N‐dimethylformamide, and dimethyl sulfoxide and could be solution‐cast into transparent, flexible, and tough films. The films had tensile strengths of 84–111 MPa, elongations at break of 8–33%, and initial moduli of 2.2–2.8 GPa. Wide‐angle X‐ray diffraction revealed that most polymers III were amorphous. The glass‐transition temperatures of some of the polymers could be determined by differential scanning calorimetry traces, recorded at 247–290 °C. The polyamide‐imides exhibited excellent thermal stabilities and had 10% weight loss at temperatures in the range of 501–575 °C under nitrogen atmosphere. They left more than 57% residue even at 800 °C in nitrogen. A comparative study of some corresponding polyamide‐imides is also presented. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2591–2601, 2001     

Synthesis and characterization of aromatic poly(ether sulfone imide)s derived from sulfonyl bis(ether anhydride)s and aromatic diamines

Two sulfonyl group-containing bis(ether anhydride)s, 4,4′-[sulfonylbis(1,4-phenylene)dioxy]diphthalic anhydride ( IV ) and 4,4′-[sulfonylbis(2,6-dimethyl-1,4-phenylene)dioxy]diphthalic anhydride (Me- IV ), were prepared in three steps starting from the nucleophilic nitrodisplacement reaction of the bisphenolate ions of 4,4′-sulfonyldiphenol and 4,4′-sulfonylbis(2,6-dimethylphenol) with 4-nitrophthalonitrile in N,N-dimethylformamide (DMF). High-molar-mass aromatic poly(ether sulfone imide)s were synthesized via a conventional two-stage procedure from the bis(ether anhydride)s and various aromatic diamines. The inherent viscosities of the intermediate poly(ether sulfone amic acid)s were in the ranges of 0.30–0.47 dL/g for those from IV and 0.64–1.34 dL/g for those from Me- IV. After thermal imidization, the resulting two series of poly(ether sulfone imide)s had inherent viscosities of 0.25–0.49 and 0.39–1.19 dL/g, respectively. Most of the polyimides showed distinct glass transitions on their differential scanning calorimetry (DSC) curves, and their glass transition temperatures (T_g) were recorded between 223–253 and 252–288°C, respectively. The results of thermogravimetry (TG) revealed that all the poly(ether sulfone imide)s showed no significant weight loss before 400°C. The methyl-substituted polymers showed higher T_g's but lower initial decomposition temperatures and less solubility compared to the corresponding unsubstituted polymers. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1649–1656, 1998     

新型导电盐(三氟甲基磺酰)(三氟乙氧基磺酰)亚胺锂及其非水电解液的制备与性能

制备了一种新型含氟磺酰亚胺锂盐(三氟甲基磺酰)(三氟乙氧基磺酰)亚胺锂{Li[(CF₃SO₂)·(CF₃CH₂OSO₂)N], Li[TFO-TFSI]}及其与碳酸乙烯酯(EC)/碳酸甲乙酯(EMC)混合溶剂(3∶7, 体积比)组成的非水电解液. 采用核磁共振波谱(NMR)、 红外光谱(IR)、 质谱(MS)、 元素分析(EA)和离子色谱(IC)等手段对合成锂盐Li[TFO-TFSI]进行了结构表征及纯度分析. 通过差示量热扫描(DSC)和热重分析(TG)对Li[TFO-TFSI]及其电解液1.0 mol/L Li[TFO-TFSI]-EC/EMC(3∶ 7)的热学性质进行了表征. 采用交流阻抗(EIS)、 循环伏安(CV)、 计时安培法及扫描电子显微镜(SEM)等对Li[TFO-TFSI]/碳酸酯电解液的基础物化和电化学性质进行了表征. 结果表明, Li[TFO-TFSI]/碳酸酯电解液具有较好的电化学稳定性; 在4.2 V(vs. Li/Li⁺)以下Al箔不发生腐蚀; 室温下基于Li[TFO-TFSI]/碳酸酯电解液的Li/人造石墨和人造石墨/LiCoO₂电池均保持较好的循环性能, 特别是人造石墨/LiCoO₂锂离子电池循环100周后, 其比容量保持率明显高于相应的基于LiPF₆/碳酸酯电解液体系的电池.     

季铵盐型离子液体中全氟烷基磺酰亚胺盐催化的芳烃硝化反应

全氟烷基磺酰亚胺盐与季铵型离子液体（Cu(N(C4F9SO2)2)2/[N4446][NTf2] 或 In(NTf2)3/[N4446][NTf2]）组成的新催化体系,可以很好的催化芳香族化合物的硝化反应。以氯苯的硝化为例,用硝酸和醋酸酐混合物为硝化试剂,在2mol%的Cu(N(C4F9SO2)2)2或In(NTf2)3催化剂催化下,室温下反应10分钟,氯苯的转化率就可分别达到87.6% 和 90.6%,反应产物的邻/对位比为4.3和4.8。并且这种催化剂与离子液体组成的催化体系很容易被回收,并可以连续使用5次以上。     

Synthesis and characterization of sodium bis(trimethylstannyl) amide and bis(trimethylsilyl) bis(trimethylstannyl) -phospha-tetrazene

Sodium bis(trimethylstannyl)amide NaN(SnMe₃)₂, isolated by the reaction of trimethylstannyldiethylamine with sodium amide, reacts with tris(trimethylsilyl)hydrazino—dichloro-phosphine to form bis(trimethylsilyl)bis(trimethylstannyl)-2-phospha-2-tetrazene, (Me₃Si)₂N-N=P-N(SnMe₃)₂. Both the molecules have been isolated and characterized.     

Bis(tetramethylammonium), bis(tetrabutylammonium), and bis(tetraphenylarsonium) dihydrohexaoxoxenonates(VIII)

Bis(tetramethylammonium), bis(tetrabutylammonium), and bis(tetraphenylarsonium) dihydrohexaoxoxenonates(VIII) were obtained in an aqueous solution and in acetonitriie. The rate constants of their decomposition were determined.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 184–185, January, 1995.This work was carried out with financial support from the International Scientific Foundation (Grant REI 000).     

全氟烷基磺酸盐和全氟烷基磺酰亚胺盐的多相化催化研究

传统的Lewis酸催化剂在环境的压力下受到挑战,全氟烷基磺酸盐和全氟烷基磺酰亚胺盐作为均相、高效的Lewis酸催化剂在有机合成中受到人们的关注.为了简化分离操作,人们对全氟烷基磺酸盐和全氟烷基磺酰亚胺盐的多相化进行了研究,并已取得巨大进展.本文综述了全氟烷基磺酸盐和全氟烷基磺酰亚胺盐分别负载在有机载体、无机载体以及离子液体上的多相化催化最新研究进展,简要概括了其制备方法和催化活性,并对其催化应用前景进行了展望.     

A novel synthesis of reactive polymers with pendant halomethyl groups by the polyaddition reaction of bis(epoxide)s with bis(chloroacetoxy)esters or bis(bromoacetoxy)esters

New reactive polymers with pendant halomethyl groups were successfully synthesized by polyaddition reactions of bis(epoxide)s with bis(chloroacetoxy)ester such as 1,4-bis [(chloroacetoxy)methyl]benzene (BCAMB) or 1,4-bis[(bromoacetoxy)methyl]benzene (BBAMB) using quaternary onium salts or crown ether complexes as catalysts. The polyaddition reaction of diglycidyl ether of bisphenol A (DGEBA) with BCAMB proceeded very smoothly with high yields (83–96%) by the addition of quaternary onium salts such as tetrabutylphosphonium bromide (TBPB) or crown ether complexes such as 18-crown-6/KBr as catalysts to produce high molecular weight polymers, although the reaction occurred without any catalyst to give low molecular weight polymer in low yield at 90°C for 48 h. It was also found that the reaction proceeded smoothly in aprotic polar solvents such as N-methyl-2-pyrrolidone (NMP) and N,N-dimethylacetamide (DMAc) to produce high molecular weight polymers. Polyaddition reactions of DGEBA or digylcidyl ether of ethylene glycol (DGEEG) with BBAMB, other bis(chloroacetoxy)esters or bis(bromoacetoxy)esters using TBPB in DMAc also proceeded smoothly to give the corresponding polymers. The resulting poly(ether-ester)s contain reactive halomethyl groups as side chains, which were introduced during main chain formation. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3791–3799, 1997     

Novel organosoluble and colorless poly(ether imide)s based on 3,3‐bis[4‐(3,4‐dicarboxyphenoxy)phenyl]phthalide dianhydride and aromatic bis(ether amine)s bearing pendent trifluoromethyl groups

A novel series of colorless and highly organosoluble poly(ether imide)s were prepared from 3,3‐bis[4‐(3,4‐dicarboxyphenoxy)phenyl]phthalide dianhydride with various fluorinated aromatic bis(ether amine)s via a conventional two‐stage process that included ring‐opening polyaddition to form the poly(amic acid)s followed by cyclodehydration to produce the polymer films. The poly(ether imide)s showed excellent solubility, with most of them dissoluble at a concentration of 10 wt % in amide polar solvents, in ether‐type solvents, and even in chlorinated solvents. Their films had a cutoff wavelength between 358 and 373 nm, and the yellowness index ranged from 3.1 to 9.5. The glass‐transition temperatures of the poly(ether imide) series were recorded between 237 and 297 °C, the decomposition temperatures at 10% weight loss were all above 494 °C, and the residue was more than 54% at 800 °C in nitrogen. These films showed high tensile strength and also were characterized by higher solubility, lighter color, and lower dielectric constants and moisture absorption than an analogous nonfluorinated polyimide series. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3140–3152, 2006     

New organic metals: Radical cation salts of bis(ethylenedioxo)tetrathiafulvalene with halide mercurate anions

Radical cation salts with halide mercurate anions were obtained by the electrochemical oxidation of bis(ethylenedioxo)tetrathiafulvalene (BEDO-TTF), and their conductivity was studied. The compounds (BEDO-TTF)₄Hg₃X₈ (X = Cl or Br), (BEDO-TTF)₄Hg_3.5I₉, and (BEDO-TTF)₂HgBr₃ possess the conductivity of the metallic type down to helium temperatures.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 1167–1170, May, 1996.     

Hafnium (IV) bis(perfluorooctanesulfonyl)imide complex catalyzed synthesis of polyhydroquinoline derivatives via unsymmetrical Hantzsch reaction in fluorous medium

A facile and efficient synthesis of polyhydroquinoline derivatives was reported via four-component condensation reaction of aldehydes, dimedone, active methylene compounds, and ammonium acetate in the presence of Hf(NPf₂)₄ in C₁₀F₁₈ at 60 °C. The method offers several advantages including high yields, short reaction time, simple work-up procedure and catalyst reusability.     

Synthesis of novel bis(chromenes) and bis(chromeno[3,4-C]pyridine) incorporating piperazine moiety

Novel bis(2-oxo-2H-chromene) as well as bis(2-imino-2H-chromene) derivatives incorporating piperazine moiety were prepared by the cyclocondensation reaction of bis(2-hydroxybenzaldehyde) with two equivalents of each of the appropriate β-ketoesters or acetonitrile derivatives. The bis(2-imino-2H-chromene-3-carbothioamide) derivative was used as a key synthon for construction of novel bis(3-(4-substituted thiazol-2-yl)-2H-chromen-2-one) derivatives via its cyclocondensation with a series of the appropriate α-halocarbonyl derivatives. Moreover, the bis(2-hydroxybenzaldehyde) reacted with four equivalents of the appropriate acetonitrile derivatives to afford the corresponding bis(3H-chromeno[3,4-c]pyridine) derivatives. Elucidation of the structure of the novel bis(chromenes) bearing piperazine nucleus was established by the spectral data and elemental analyses.     

New light‐colored poly(ether imide)s based on 2,5‐di‐tert‐butylhydroquinone bis(ether anhydride) and aromatic diamines

A series of poly(ether imide)s (PEIs), III _a–k , with light color and good physical properties were prepared from 1,4‐bis(3,4‐dicarboxypheoxy)‐2,5‐di‐tert‐butylbenzene dianhydride ( I ) with various aromatic diamines ( II _a–k ) via a conventional two‐stage procedure that included a ring‐opening polyaddition to yield poly(amic acid)s (PAA), followed by thermal imidization to the PEI. The intermediate PAA had inherent viscosities in the range of 1.00–1.53 dL g^?1. Most of the PEIs showed excellent solubility in chlorinated solvents such as dichloromethane, chloroform, and m‐cresol, but did not easily dissolve in dimethyl sulfoxide and amide‐type polar solvents. The III series had tensile strengths of 96–116 MPa, an elongation at break of 7–8%, and initial moduli of 2.0–2.5 GPa. The glass‐transition temperatures (T_g) and softening temperatures (T_s's) of the III series were recorded between 232 and 285 °C and 216–279 °C, respectively. The decomposition temperatures for 10% weight loss all occurred above 511 °C in nitrogen and 487 °C in air. The III series showed low dielectric constants (2.71–3.54 at 1 MHz), low moisture absorption (0.18–0.66 wt %), and was light‐colored with a cutoff wavelength below 380 nm and a low yellow index (b^*) values of 7.3–14.8. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1270–1284, 2005