Silica‐Supported Perchloric Acid (HClO4–SiO2): An Efficient Catalyst for One‐Pot Synthesis of Functionalized Tetrahydropyrimidine Derivatives

HClO₄–SiO₂ has been found to be a highly efficient catalyst for the synthesis of substituted tetrahydropyrimidine and bis‐tertahydropyrimidine derivatives in good to excellent yields involving the reaction of dimethyl acetylenedicarboxylate, amines/diamines, and formaldehyde. One‐pot, atom economy, high‐bond forming efficiency, environmentally benign, good yields, and mild reaction conditions are some of the salient features of this multicomponent reaction.     

rac-BINAP-PdCl2 catalyzed Heck reactions of 3-formylquinolin-2-yl chlorides with methyl acrylate: synthesis of methyl 3-(3-formylquinolin-2-yl) acrylates

rac-BINAP-PdCl₂ catalytic system catalyzed Heck reaction of 3-formylquinolin-2-yl chlorides with methyl acrylate in DMA is described to the synthesis of methyl 3-(3-formyl-quinolin-2-yl)-acrylates, in good to excellent yields. The reaction could be also extended with other activated alkenes to afford Heck products. Fused-benzene ring in heterocyclic and carbocyclic moieties was found to enhance the yields.     

Stereoselective synthesis of CF3-substituted trans- and cis-enediynes via carbocupration or hydrostannation reactions of CF3-containing diyne

CF₃-containing diyne, readily prepared from (Z)-2,3,3,3-tetrafluoro-1-iodoprop-1-ene in two steps, was smoothly subjected to carbocupration reaction with various organocuprates, followed by treatment of the resultant carbocupration adducts with iodine, the corresponding vinyl iodides being formed in good yields in a cis-addition manner. Thus obtained iodide could be successfully converted into CF₃-substituted trans-enediynes in high yields. Also, hydrostannation reaction of the diyne proceeded well in a trans-addition manner to give the corresponding vinylstannane in high yield. The vinylstannane was also found to be effectively convertible to CF₃-substituted cis-enediynes in high yields.     

Sulphamic Acid （H2NSO3H）-Catalyzed Multicomponent Reaction of β-Naphthol： An Expeditious Synthesis of Amidoalkyl Naphthols

Sulphamic acid （H2NSO3H） was found to be an efficient catalyst for the multicomponent condensation reaction of β-naphthol, aromatic aldehydes and urea or amides to afford the corresponding α-amidoalkyl-β-naphthols in good yields. The remarkable features of this new procedure are high conversions, short reaction time, clean reaction profiles and simple experimental and work-up procedures.     

Solvent-free reductive amination of aromatic aldehydes catalyzed by CeCl3·7H2O

Abstract

CeCl₃·7H₂O is found to be an efficient catalyst in the one-pot reductive amination of aromatic aldehydes under solvent-free conditions. Selectivity is observed in the reaction of cinnamaldehyde with aromatic amines, providing an alternative green route to the synthesis of N-cinnamyl anilines. The reaction conditions are mild and the desired product is obtained in good yields.     

Cu2O-catalyzed Ullmann-type reaction of vinyl bromides with imidazole and benzimidazole

Cu₂O was found to be an efficient and economical metal catalyst in the Ullmann cross-coupling reaction of vinyl bromides with imidazole or benzimidazole. The system Cu₂O/ethyl 2-oxocyclohexanecarboxylate showed high catalytic activity in MeCN at 80–90 °C. The reaction gave the corresponding coupling products in good to excellent yields.     

NaHSO4•SiO2催化合成β-烯胺酮(酯)

NaHSO₄•SiO₂作催化剂, 1,3-二羰基化合物和伯胺在室温下反应合成了一系列β-烯胺酮(酯), 该法反应条件温和, 产率高, 催化剂能回收再利用.     

Lanthanide Amide-catalyzed Aza-Henry Reaction of N-Tosyl Imines with Nitroalkanes

In the presence of 10 mol% lanthanide amide [(Me₃Si)₂N]₃Ln(µ‐Cl)Li(THF)₃, the aza‐Henry reaction of N‐tosyl imines with nitroalkanes (1:5 molar ratio) could be performed in good yields. The lanthanide amide‐catalyzed aza‐Henry reaction has the features of mild reaction conditions, tolerance of a variety of aromatic aldehyde‐derived imines and nitroalkanes, short time and good chemical yields. A catalytic mechanism for the reaction was also proposed.     

A convenient synthesis of dihydrocoumarins from phenols and cinnamic acid derivatives

A facile procedure for synthesis of dihydrocoumarin derivatives was described. Although the yield of the products in the reaction of phenols with acrylates in trifluoroacetic acid in the presence of Pd(OAc)₂ giving coumarins was found to be very low, dihydrocoumarin derivatives were obtained in good to high yields in the absence of Pd(OAc)₂ when ethyl cinnamates bearing electron-donating groups were employed in this reaction.     

Tandem and chemoselective synthesis of benzil derivatives from styrene and arene diazonium salts

A facile and practically applied protocol for synthesis of benzil derivatives using styrene and arene diazonium salts is reported. Pd(OAc)₂/SeO₂ catalytic system was found to be efficient for chemoselective synthesis of benzil. Selenium dioxide works well as an oxidant under milder reaction conditions. Moderate to very good yields of the desired products were obtained.     

Facile preparation of aromatic esters from aromatic bromides with ethyl formate or DMF and molecular iodine via aryllithium

Various aromatic bromides were treated with n-BuLi and subsequently with ethyl formate, followed by the reaction with ethanol and molecular iodine in the presence of K₂CO₃ to provide the corresponding aromatic ethyl esters in good yields. Moreover, aromatic bromides could be transformed into the corresponding aromatic methyl esters in good yields by the treatment with n-BuLi and subsequently with DMF, followed by the reaction with methanol, molecular iodine, and K₂CO₃. Some aromatics could be also converted into the corresponding aromatic esters in good yields by the treatment with n-BuLi, and subsequently with ethyl formate or DMF, followed by the reaction with molecular iodine and K₂CO₃. The present reactions offer a novel route for the transition-metal-free, carbon-monoxide-free, and therefore environmentally benign one-pot conversion of aromatic bromides and aromatics into aromatic esters.     

CrCl3·6H2O/Hydrogenated Bis‐Schiff Base as a New Efficient Catalyst System for Synthesis of Bis(indoly) Methane

CrCl₃·6H₂O/hydrogenated bis‐Schiff base is found to be an effective catalyst system for synthesis of bis(indoly) methane via electrophilic addition reaction of indoles with aldehydes using acetonitrile as the solvent. The yields of isolated products are from good to excellent.     

Photocatalyzed facile synthesis of 2,5-diaryl 1,3,4-oxadiazoles with polyaniline- g-C3N4-TiO2 composite under visible light

PANI (polyaniline)-g-C₃N₄-TiO₂ composite was prepared and found to be efficient for the synthesis of 2,5-diaryl 1,3,4-oxadiazoles under visible light. This reaction involved decarboxylation and cyclization from α-keto acids with acylhydrazines, and a broad scope of substrates were tolerated to provide the desired products in moderate to good yields. Control experiments indicated that a radical pathway was involved in the present photocatalytic reaction and a synergistic effect may exist in the ternary composite. Moreover, this semiconductor photocatalyst could be readily recovered and showed good reusability with only slight decrease in the catalytic activity after six consecutive runs.     

Convergent Synthetic Route to Pyrano[2,3-a]carbazole by Multicomponent Reaction

NaHCO₃ has been found to be an efficient base catalyst for the synthesis of pyrano[2,3-a]carbazoles from 1-hydroxycarbazoles by multicomponent reaction using solvent-free grinding methods. In this case, the products have been found in good yields, without formation of any side product.     

PEG1000-Based Dicationic Acidic Ionic Liquid as an Efficient Catalyst for Mannich-Type Reaction in Water

PEG₁₀₀₀-based dicationic acidic ionic liquid (PEG₁₀₀₀-DAIL) was found to be an efficient and recyclable catalyst for Mannich-type reaction of different ketones with various aromatic aldehydes and aromatic amines in water to give various β-arylamino ketones in good yields. The catalytic system could be easily recovered and reused for at least six runs only with slight decrease in its activity.     

Organocatalytic conjugate addition of 1-bromonitroalkanes to α,β-unsaturated aldehydes: synthesis of nitrocyclopropanes

A variety of secondary amines were studied as the catalyst in the conjugate addition of 1-bromonitromethane to α,β-unsaturated aldehydes. Proline was identified as the best catalyst for this reaction. MeOH/AcONa system was found to provide much better yields than CHCl₃/Et₃N system reported before. Good yields of nitrocyclopropane products were obtained with a variety of β-aryl acroleins. Several substituted 1-bromonitromethanes were also examined in the reaction. Both 1-bromonitroethane and 1-phenyl-1-bromonitromethane gave the corresponding nitrocyclopropanes in good yields. The diastereoselectivity of the reaction was strongly affected by the steric hindrance of 1-bromonitroalkanes.     

Application of Ball Milling Technology to Carbohydrate Reactions: I. Regioselective Primary Hydroxyl Protection of Hexosides and Nucleoside by Planetary Ball Milling‡

Dry ball milling of hexosides with trityl chloride in the presence of DABCO or Na₂CO₃ has been found to result in their complete conversion to the respective 6‐O‐trityl ethers. Further wet grinding of the reaction mixture with Ac₂O in the presence of DMAP led to the respective fully protected hexosides in good to excellent yields after isolation. It has been found to be an effective one‐pot two‐step synthesis under solvent‐free condition. The speed of homogenization has been shown to highly influence the rate and outcome of the reaction, and commercially available planetary ball mill has been proved to be very convenient for carrying out the reaction under standardized and reproducible conditions.     

Zn-mediated rhodium-catalyzed α-trifluoromethylation of ketones via silyl enol ethers

The treatment of silyl enol ethers of ketones with CF₃-I and Et₂Zn in the presence of RhCl(PPh₃)₃ in DME gave α-trifluoromethyl ketones in good yields. The reaction can be widely applicable to silyl enol ethers derived from aliphatic or aromatic ketones. In the absence of the rhodium catalyst, the reaction was very slow and the yields were quite poor.     

Nickel‐Catalyzed Cyclization of ortho‐Iodoketoximes and ortho‐Iodoketimines with Alkynes: Synthesis of Highly Substituted Isoquinolines and Isoquinolinium Salts

A convenient method for the synthesis of highly substituted isoquinolines and isoquinolinium salts by the nickel‐catalyzed cyclization of ortho‐haloketoximes and ‐ketimines, respectively, with alkynes is described. The reaction of ortho‐haloketoximes and various alkynes in the presence of [Ni(PPh₃)₂Br₂] and zinc powder in a mixture of acetonitrile and tetrahydrofuran at 80 °C for 15 hours gave 1,3,4‐trisubstituted isoquinoline products in moderate to excellent yields and high regioselectivity. The corresponding isoquinoline N‐oxide was found to be the intermediate in the cyclization reaction pathway. In contrast, the reaction of ortho‐haloketimines and alkynes under similar catalytic conditions in tetrahydrofuran at 70 °C for two hours gave 1,2,3,4‐tetrasubstituted isoquinolinium salts in good to excellent yields.     

Synthesis of isochromans via Fe(OTf)2-catalyzed Oxa-Pictet–Spengler cyclization

Fe(OTf)₂ has been found to be an efficient catalyst for the Oxa-Pictet–Spengler cyclization reaction leading to isochromans. A series of substituted isochromans were obtained with good to excellent isolated yields by coupling β-arylethanols with aldehydes or ketals under the catalysis of 1?mol% of Fe(OTf)₂?at 70?°C. Using a cheap, less-toxic catalyst with water as the only byproduct, this iron-catalyzed Oxa-Pictet–Spengler reaction can be considered environmentally-friendly and atom-economic.