Synthesis of enantiopure, axially chiral, C-tetrasubstituted α-amino acids with binaphthyl-based crowned side chains and 3D-structural analysis of their peptides

The syntheses of the terminally protected, crowned, C^α-tetrasubstituted α-amino acids with only axial chirality, the two diastereomers Boc-(S)-Bip[(R)-Binol-22-C-6]-OMe and Boc-(R)-Bip[(R)-Binol-22-C-6]-OMe, and their respective enantiomers Boc-(R)-Bip[(S)-Binol-22-C-6]-OMe and Boc-(S)-Bip[(S)-Binol-22-C-6]-OMe, all derived from 2′,1′:1,2; 1″,2″:3,4-dibenzcyclohepta-1,3-diene-6-amino-6-carboxylic acid (Bip), were performed by bis-alkylation with cyclization of racemic (R+S)-Boc-[HO]₂-Bip-OMe, possessing two phenolic OH groups at the 6,6′-positions of the biphenyl frame of Bip, using (+)-(R)- and (−)-(S)-Binol[(OCH₂CH₂)₂OTs]₂ (2,2′-bis[5-tosyloxy-3-oxa-1-pentyloxy]-1,1′-binaphthyl), respectively, as the alkylating agent followed by chromatographic separation. Two series of terminally protected model peptides to the hexamer level, containing the (R)-Bip[(S)-Binol-22-C-6] residue at i and i+3 positions of the sequence, combined with either l-Ala or l-Ala/Aib, were synthesized by solution methods. Their 3D-structural analyses by FTIR absorption and NMR suggest that these peptides preferentially adopt folded secondary structures.     

New optically active organoantimony (BINASb) and bismuth (BINABi) compounds comprising a 1,1′-binaphthyl core: synthesis and their use in transition metal-catalyzed asymmetric hydrosilylation of ketones

Racemic 2,2′-bis[diarylstibano]-1,1′-binaphthyls [(±)-BINASbs] and 2,2′-bis[di(p-tolyl)bismuthano]-1,1′-binaphthyl [(±)-BINABi], which are the antimony and bismuth congeners of BINAP, have been prepared from 2,2′-dibromo-1,1′-binaphthyl (DBBN) via 2,2′-dilithio-1,1′-binaphthyl intermediate by treatment with the appropriate metal halides [(p-Tol)₂SbBr, Ph₂SbBr and (p-Tol)₂BiCl]. The optical resolution of the (±)-BINASbs could be achieved via the separation of a mixture of the diastereomeric Pd-complexes derived from the reaction of (±)-BINASbs with di-μ-chlorobis{(S)-2-[1-(dimethylamino)-ethyl]phenyl-C¹,N}dipalladium(II). Optically active (R)-BINASb and (R)-BINABi could be also obtained from optically active (R)-DBBN by the same procedure. The enantiopure BINASbs have been shown to be effective chiral ligands for the rhodium-catalyzed asymmetric hydrosilylation of ketones.     

Enantiopure arenesulfenic acids as intermediates in stereoselective synthesis

New transient arenesulfenic acids were involved in the synthesis of enantiopure 2-arylsulfinyl-1,3-dienes, showing central or axial chirality of the substituted arene residue, apart from the chirality related to the stereogenic sulfur atom. Some of the obtained dienes, that is, (S_a,S_S)- and (S_aR_S)-2-(2′-hydroxy-1,1′-binaphthalen-2-sulfinyl)-3-methyl-1,3-butadienes, were subjected to diastereoselective Diels-Alder cycloadditions with N-methylmaleimide. Removal of the arylsulfoxide auxiliary, in the major adduct, was accomplished by reductive cleavage with Raney nickel.     

Nitrenic reactivity of diazirines

Butyl 3-bromo-3H-diazirine-3-carboxylate (7) and 3-bromo-3-phenyl-3H-diazirine (17) exhibit nitrenic reactivity with phenylmagnesium bromide or tetrabutylammonium cyanide. The formation of several N,N′-disubstituted amidines is attributed to the intermediacy of 1-phenyl or 1-cyano-1H-diazirines possessing a singlet imidoylnitrene character at the N2 atom. Most notably, the reaction of 7 with PhMgBr in diethyl ether affords 2-hydroxy-2,2,N-triphenylacetamidine (9) and 2-methyl-5,5-diphenyl-4-phenylamino-2,5-dihydrooxazole (10) as products derived from nitrene insertion to the ether α-C–H bond.     

Synthesis and conformational properties of model dipeptides containing novel axially chiral α,β-didehydroamino acids at the (i+1) position of a β-turn conformation

A series of model dipeptides containing some novel axially chiral α,β-didehydroamino acids at the (i+1) position has been synthesised by reaction of the corresponding 4-(4-alkylcyclohexylidene)-2-phenyl-1,3-oxazol-5(4H)-one with (S)-phenylalanine cyclohexylamide. The conformations of two dipeptides in the crystal state have been studied by X-ray diffraction crystallographic analysis. The backbone torsion angles suggest that both peptides adopt similar type-II′ β-turn conformations. NMR spectroscopy has revealed that relatively rigid β-turn structures also persist in solution and that the absolute configurations of the axially chiral α,β-didehydroamino acids do not significantly influence the conformation of the peptide chain. Both heterochiral and homochiral dipeptides are found to accommodate the same βII′-turn conformation. Axially chiral α,β-didehydroamino acids (R_a)- and (S_a)-4-methyl-, 4-phenyl- and (4-tert-butylcyclohexylidene)glycine can be considered as elongated structural analogues of alanine, phenylglycine and tert-leucine of R and S configuration since, in these chiral α,β-didehydroamino acids, the methyl, phenyl and tert-butyl groups are located about 4.3 Å away from the peptide backbone in which they are incorporated.     

Three dimeric anthracene derivatives from the fruits of Bulbine abyssinica

From the fruits of Bulbine abyssinica three new dimeric anthracene derivatives, (P)-8,9,1′,8′-tetrahydroxy-3,3′-dimethyl[10,7′-bianthracene]-1,4,9′,10′-tetraone (trivial name abyquinone A), (10R)-1,4,8,1′,8′-pentahydroxy-3,3′-dimethyl-[10,7′-bianthracene]-9,9′,10′(10H)-trione (trivial name abyquinone B), and (10R)-3′,4′-dihydro-1,4,8,3′,8′,9′-hexahydroxy-3,3′-dimethyl-[10,7′-bianthracene]-9,1′(10H,2′H)-dione (trivial name abyquinone C) were isolated. Despite their structural differences, these three compounds are connected to each other by the apparently biomimetic conversion of abyquinone C (a preanthraquinonylanthrone with two stereogenic centers) into B (an anthraquinonylanthrone with one stereogenic center) and finally into A (an axially chiral bianthraquinone) under mild conditions, involving a highly efficient center-to-axis chirality transfer. In addition, the known anthraquinones islandicin and chrysophanol were identified. The structures were determined on the basis of spectroscopical evidences, chemical transformations, and quantum chemical CD calculations.     

Enantioselective addition of diethylzinc to aromatic aldehydes catalyzed by Ti(IV) complexes of C2-symmetrical chiral BINOL derivatives

Enantioselective addition of diethylzinc to a series of aromatic aldehydes is developed using new chiral C₂-symmetric ligand (S)-2,2′-(1,1′-binaphthyl-2,2′-diylbis(oxy))bis(methylene)bis(4-nitrophenol) (S)-2b. The catalytic system employing 10 mol % of (S)-2b and 120 mol % of Ti(OiPr)₄ was found to promote the addition of diethylzinc to a wide range of aromatic aldehydes with electron-donating and electron-withdrawing substituents, giving up to 89% ee and up to 95% yield of the corresponding secondary alcohol under mild conditions.     

Copper(I) catalysis: Synthesis of N,N′-diarylated and N-aryl,N′-formylated chiral C2-symmetric diamines

Chiral N,N′-diaryl C₂-symmetric diamines and N-aryl,N′-formyl-trans-(1R,2R)-diaminocyclohexane are readily accessed by copper catalyzed N,N′-diarylation and N-aryl,N′-formylation of trans-(1R,2R)-diaminocyclohexane with aryl bromides. N,N′-diarylation using (R)-1,1′-binaphthyl-2,2′-diamine and iodobenzene gave the corresponding (R)-N,N′-diphenyl-1,1′-binaphthyl-2,2′-diamine derivative in 83% yield.     

Synthesis and characterization of polybinaphthalene incorporating chiral (R) or (S)-1,1′-binaphthalene and oxadiazole units by Heck reaction

Chiral conjugated polymers P-1 and P-2 were synthesized by the polymerization of (R)-3,3′-diiodo-2,2′-bisbutoxy-1,1′-binaphthalene ((R)-M-1) and (S)-3,3′-diiodo-2,2′-bisbutoxy-1,1′-binaphthalene ((S)-M-1) with 2,5-bis(4-vinylphenyl)-1,3,4-oxadiazole (M-2) under Pd-catalyzed Heck coupling reaction, respectively. Both monomers and polymers were analysed by NMR, MS, FT-IR, UV, DSC-TG, fluorescent spectroscopy, GPC and CD spectra. The chiral conjugated polymers exhibit strong Cotton effect in their circular dichroism (CD) spectra indicating a high rigidity of polymer backbone. CD spectra of polymers P-1 and P-2 are almost identical and have opposite signs for their position. These polymers have strong blue fluorescence.     

Doubly hydrogen-bridged 1,2-diphenylenediboranes derived from 9-chloro-9-borafluorene and ligand exchange reactions

Cyclic 1,2-diphenylenediboranes containing a doubly hydrogen-bridged structure, including 1,2-(2,2^′biphenylylene)diborane(I) and 1,2-(2,2^′biphenylylene)-1,2-diethyldiborane (II), are conveniently prepared by treating 9-chloro-9-borafluorene with NaBH₄ and Na(Et)₃BH, respectively. The reaction mechanism involves an initial Cl-H exchange to form 9-borafluorene containing a reactive 5-member ring diarylborane moiety, which subsequently engages in a facile ring expansion with the in situ formed B-H containing residue (BH₃ or HBEt₂) to result in cyclic 1,2-diphenylenediboranes compounds. The doubly hydrogen-bridged structure shows good thermal stability up to 50 °C. Upon thermal cleavage at higher temperature, all free B-H groups become very reactive involving hydroboration with α-olefin. The complexization study also reveals that this intradiborane moiety forms a 1:2 complex with a strong base, such as pyridine.     

A simple and stereodivergent strategy for the synthesis of 3′-C-branched 2′,3′-dideoxynucleosides exploiting (Z)-but-2-en-1,4-diol and (R)-2,3-cyclohexylideneglyceraldehyde

Barbier type additions of allylic bromide 4, derived from (Z)-but-2-en-1,4-diol 2 to (R)-2,3-cyclohexylideneglyceraldehyde 1 were performed through mediation with Zn employing Luche’s procedure and also with low valent Cu, Co, and Fe which were produced via bimetal redox strategy in THF to afford 5c,d as the major products. From these, 5a,b were prepared following an oxidation-reduction protocol. Compound 5c was exploited as a representative starting material to develop a simple and inexpensive strategy toward the synthesis of 3′-C-branched 2′,3′-dideoxynucleosides having stereodiversity at 3′- and 4′-positions.     

Ammonium salts from polymer-bound N-hydroxysuccinimide as solid-supported reagents for EDC-mediated amidations

New ammonium and alkylammonium salts derived from a polymeric N-hydroxysuccinimide (P-HOSu) have been prepared and used for the amidation of carboxylic acids and amino acids mediated by 1-ethyl-3-(3′-dimethylamino-propyl)carbodiimide hydrochloride (EDC). These polymer-supported ammonium salts afforded the corresponding amides in good yield, without detectable α-racemization and with easy recovery of the P-HOSu after the amidation reaction, being especially suitable for the amidation of Fmoc-protected amino acids.     

N,N,N,N-Tetramethyl-1,3-propanediamine as the catalyst of choice for the Baylis-Hillman reaction of cycloalkenone: rate acceleration by stabilizing the zwitterionic intermediate via the ion-dipole interaction

N,N,N^′,N^′-Tetramethyl-1,3-propanediamine (TMPDA) can be used as an efficient catalyst for the Baylis-Hillman reaction of cycloalkenones. The increased reaction rate was thought be derived from the stabilizing effect of the zwitterionic intermediate via the ion-dipole interaction.     

Enantioselective synthesis of (2S,3′R,7′Z)-N-(3′-hydroxy-7′-tetradecenoyl)-homoserine lactone

A concise enantioselective total synthesis of (2S,3′R,7′Z)-N-(3′-hydroxy-7′-tetradecenoyl)-homoserine lactone is described. Key feature of this protocol is a catalytic asymmetric hydrogenation and a prophenol-zinc-catalyzed diazo addition to imine reaction as genesis of chirality. Moreover, flexibility is built in the synthesis to generate enantioenriched analogs using catalytic amount of enantioenriched C₂-symmetric ligands.     

Asymmetric addition of phenylacetylene to aldehydes catalyzed by soluble optically active polybinaphthols ligand

A chiral polymer ligand was synthesized by the polymerization of (S)-5,5′-dibromo-6,6′-dibutyl-2,2′-binaphthol (S-M-1) with (S)-2,2′-bishexyloxy-1,1′-binaphthyl-6,6′-boronic acid (S-M-2) via Pd-catalyzed Suzuki reaction. The application of the chiral polymer ligand to the asymmetric addition of phenylethynyl zinc to various aldehydes has been studied. The results show that the soluble chiral polybinaphthols ligand in combination with Et₂Zn and Ti(OⁱPr)₄ can exhibit excellent enantioselectivity for phenylacetylene addition to both aromatic and aliphatic aldehydes. The catalytically active center of the repeating unit S-1 used as a catalyst produced the opposite configuration of the propargylic alcohols to that of S-1, on the contrary, the chiral polymer gave the same configuration as the optically active binaphthol moiety of the polybinaphthols ligand. Moreover, the chiral polymer ligand can be easily recovered and reused without loss of catalytic activity as well as enantioselectivity.     

Straightforward, racemization-free synthesis of peptides with fairly to very bulky di- and trisubstituted glycines

Several fully protected tri- and pentapeptides containing a central symmetrical α,α-dialkyl glycine residue, with the alkyl group varying from methyl or ethyl to benzyl, were synthesized in good yields by a strategy based on the Ugi-Passerini reaction. Each Ugi-Passerini adduct was selectively cleaved and the product submitted to an assisted N,N′-dicyclohehylcarbodiimide coupling to an amino acid or dipeptide ester, respectively. Tripeptides as the above but containing a 4-methoxybenzyl group at the nitrogen atom of the central residue were also synthesized in fair to good yields by N-[(1H-benzotriazol-1-yl)-(dimethylamino)methylene]-N-methylmethanaminium hexafluorophosphate N-oxide assisted couplings. The results reported here show that our strategy is appropriate for routine synthesis of peptides incorporating these moieties.     

New soluble aromatic polyamides containing ether linkages and laterally attached p-terphenyls

Two series of new polyamides containing flexible ether linkages and laterally attached side rods (3a-i and 4a-i) were synthesized from 2^′,5^′-bis(4-aminophenoxy)-[1,1^′;4^′,1^″]terphenyl (1a) and 2^′,5^′-bis(4-amino-2-trifluoromethylphenoxy)-[1,1^′;4^′,1^″]terphenyl (1b), respectively, with various aromatic dicarboxylic acids by the direct phosphorylation polycondensation. The polymers were produced with high yields and moderate to high inherent viscosities (0.41-0.97 dl/g) that corresponded to weight-average molecular weights (by size exclusion chromatography) of 47,000-65,000. Except for some polyamides that derived from rigid diacids, the obtained polyamides were readily soluble in aprotic polar solvents, such as N-methyl-2-pyrrolidone (NMP) and N,N-dimethylacetamide (DMAc), and could afford flexible and tough films via solvent casting. The polymer films cast from DMAc solutions possessed tensile strengths of 85-106 MPa and initial moduli of 1.82-2.96 GPa. These polyamides showed glass-transition temperatures (T_g) in the range of 206-263 °C (by DSC) and softening temperatures (T_s) in the range of 211-253 °C (by TMA). Decomposition temperatures (T_d) for 10% weight loss all occurred above 400 °C (by TGA) in both nitrogen and air atmospheres. The polyamides 4a-i derived from trifluoromethyl-substituted diamine 1b generally showed a higher solubility, T_g and T_s but lower thermal stability as compared to the analogous polyamides 3a-i based on diamine 1a.     

Synthesis and characterization of coordination polymers of a carboxylato cyclophane with metal [Zn(II) and Cd(II)]-2,2′-bipyridines

N,N′,N′′,N′′′-Tetrakis(3-carboxy-propionyl)-1,6,20,25-tetraaza-[6.1.6.1] paracyclophane, H₄cp has been complexed with metal (Zn(II) and Cd(II)) 2,2′-bipyridyls. The resulting complexes of the composition [{Zn(2,2′-bpy)}₂(cp)]_n·4H₂O 1 and [{Cd(2,2′-bpy)}₂(cp)]_n·5H₂O 2 (2,2′-bpy = 2,2′-bipyridine) have been characterized using spectroscopic (IR, solid state UV–Vis), elemental analysis and single-crystal X-ray diffraction measurements. In these complexes the cyclophane coordinates in different modes, and in complex 2, Cd(II) is hepta-coordinated. However, under harsh reaction conditions (using excess nitric acid and a longer reaction time) debranching of the cyclophane is observed in the reaction of Zn(2,2′-bpy)(NO₃)₂ with H₄cp, and a complex of the composition [Zn(2,2′-bpy)(Suc)]_n3 (suc = succinate) is isolated. Using non-covalent interactions, complexes 1 and 2 provide 3D supramolecular structures, whereas an infinite 1D chain structure is observed for complex 3. The thermal and photoluminescence properties of the complexes have also been studied.     

The highly regiospecific synthesis and crystal structure determination of 1,1′-2,5′ substituted ring-locked ferrocenes

1,1′-Ferrocene biscarboxaldehyde (1) has been prepared and the aldehyde groups were subsequently protected with acetal groups to produce 1,1′-bisacetalferrocene (2). A ring-locked ferrocene was synthesised by further derivatisation of the cyclopentadiene rings at the 2,2′ positions with phosphine substituents to produce 2,2′-bis-(acetal)-1,1′-diphenylphosphinoferrocene (3), which was subsequently coordinated to either a nickel chloride (5) or nickel bromide (6) metal centre. The ring-locked ferrocene complexes produced 2,5′-bis-(acetal)-1,1′-diphenylphosphinoferrocene substitution patterns. The acetal protecting groups of 2,2′-bis-(acetal)-1,1′-diphenylphosphinoferrocene were removed to produce 1,1′-bis-carboxaldehyde-2,2′-diphenylphosphinoferrocene (4). The Cp rings of 1,1′-bisacetalferrocene were also further derivatised at the 2,2′ positions with a silane to produce the ring-locked 1,1′-siloxane-2,5′-bisacetalferrocenophane (7). The acetal protecting groups were removed from this to produce 1,1′-siloxane-2,5′-ferrocenophanecarboxaldehyde (8). For both the phosphine and siloxane electrophiles, the substitution on the Cp rings gives chiral products (obtained as racemic mixtures). Due to the highly regioselective nature of the reaction and diastereoselectivity in the products only C₂-symmetric compounds were observed without the presence of meso diastereoisomers. Subsequent ring-locking forced the Cp rings to rotate, leading to 1,1′-ring-locked ferrocenes with 2,5′-arrangement of the acetal groups (i.e. on opposite faces of the ferrocene unit).     

Asymmetric addition of trimethylsilylcyanide to N-benzylimines catalyzed by recyclable chiral dimeric V(V) salen complex

Chiral dimeric vanadium (V) salen complex (10 mol%) derived from 5,5-Methylene di-[(S,S)-{N-(3-tert-butyl salicylidine)-N′-(3′,5′-di-tert-butyl salicylidene)]-1,2-cyclohexanediamine] with vanadyl suphate followed by auto oxidation was used as efficient catalyst for enantioselective Strecker reaction of N-benzylimines with TMSCN at −30 °C. Excellent yield (92%) of α-aminonitrile and high chiral induction was achieved (ee up to 94%) in case of 2-methoxy substituted N-benzylimines in 10 h. The catalytic system worked well up to four cycles with retention of enantioselectivity.