A new strategy for synthesis of polymeric supports with triazene linkers

A new strategy based on the use of diethylamine triazenes for stabilization and generation of polymer supported diazonium ions was described. New economical syntheses of four new polymeric supports with 3- and 6-carbon atom spacers and triazene linkers derived from meta- and para-aminophenol were described and compared to the traditional methods. The possible application of the polymer bound triazene masked diazonium salts as supports for immobilization of secondary amines (nortropine and 4-piperidinole and their esterification and oxidation), and as amine scavengers was shown. The new supports with meta-C₃-T2 and para-C₃-T2 linkers showed higher loadings and typically gave products with good yields and purities.     

Optically active palladacycles containing imines derived from 1-(1-naphthyl)ethylamine: new resolving agents for P-chiral phosphines

The synthesis of the new palladium metallacycles containing imines derived from 1-(1-naphthyl)ethylamine is reported. These new organometallic complexes have been used to resolve the P-chiral ligand benzylcyclohexylphenylphosphine. The absolute configuration of (R_C,S_P)-[PdCl{2-[HCN-CH(Me)C₁₀H₆]-3-ClC₆H₃}(PBzCyPh)] has been determined by single crystal X-ray analysis.     

Uncovering growth species of multivariate MOFs in liquid phase by mass spectrometry

The unveiling of MOF growth mechanism is hampered by the lack of fundamental knowledge about the very early stage of nucleation, especially the form and ratio of molecular species in the solution for crystal growth. Herein, we report the detection of growth species for a series of MOFs with mono-linker, Cu-MOF-2-BDC and Cu-MOF-2-NDC, and two linkers, MTV-MOF-2-(C₄H₄)_x, by high resolution ESI-MS, where a large variety of Cu-containing species are identified unambiguously. The solvent molecules such as H₂O, methanol and DMF participate in the formation of these species, other than ethanol. Furthermore, in the growth solution of MTV-MOF-2-(C₄H₄)_x, growth species containing two different organic linkers are observed. The feeding ratio is not the only factor controlling the distribution of growth species for MTV-MOFs, but also the solvent involves in coordination, an aspect usually overlooked previously.     

Synthesis and solution properties of sulfate-type hybrid surfactants with a benzene ring

Nine novel sulfate-type hybrid surfactants, C_mF_2m+1C₆H₄CH(OSO₃Na)C_nH_2n+1 (FmPHnOS: m=4, 6, 8; n=3, 5, 7; C₆H₄: p-phenylene), with a benzene ring in their molecules were synthesized. Alkanoyl chlorides were allowed to react with iodobenzene in the presence of aluminum chloride to give the corresponding aromatic ketones. The reaction of the ketones with perfluoroalkyl iodides yielded 1-[4-(perfluoroalkyl)phenyl]-1-alkanones as intermediates. The intermediates were allowed to react with methanol in tetrahydrofuran in the presence of sodium borohydride to yield 1-[4-(perfluoroalkyl)phenyl]-1-alkanols. The desired hybrid surfactants were obtained by the reaction of 1-[4-(perfluoroalkyl)phenyl-1-alkanols with sulfur trioxide/pyridine complex in pyridine and by the subsequent neutralization of the products with sodium hydroxide solution. When compared with the conventional hybrid surfactants, C_mF_2m+1C₆H₄COCH(SO₃Na)C_nH_2n+1 (FmHnS: m=4, 6; n=2, 4, 6; C₆H₄: p-phenylene), the new hybrid surfactants thus synthesized were found to have a comparable ability to lower the surface tension of water and a high hydrophilicity. The cmc of FmPHnOS obeyed Kleven’s rule and their occupied areas per molecule increased with increasing m and n with the values between 0.66 and 1.05 nm². The aggregation number for FmPHnOS micelles ranged from 6 to 45 and the hydrodynamic radius of the micelles was in the range of 1.4-3.1 nm.     

Conformational study of the structure of free 12-thiacrown-4 and some of its cation metal complexes

Conformational search of 12-thiacrown-4, 12t4, was performed using the CONFLEX method and the MMFF94S force field whereby 156 conformations were predicted. Optimized geometries of the 156 predicted conformations were calculated at the HF, B3LYP, CAM-B3LYP, M06, M06L, M062x and M06HF levels using the 6-311G** basis set. The correlation energy was recovered at the MP2 level using the same 6-311G** basis set. Optimized geometries at the MP2/6-311G** level and G3MP2 energies were calculated for some of the low energy conformations. The D ₄ conformation was predicted to be the ground state conformation at all levels of theory considered in this work. Comparison between the dihedral angles of the predicted conformations indicated that for the stability of 12t4, a SCCS dihedral angle of 180° requirement is more important than a gauche CSCC dihedral angle requirement. Conformational search was performed also for the 12t4?CAg⁺, Bi³⁺, Cd²⁺, Cu⁺ and Sb³⁺ cation metal complexes using the CONFLEX method and the CAChe-augmented MM3 and MMFF94S force fields. Conformations with relative energies less than 10?kcal/mol at the MP2/6-31+G*//HF/6-31+G* level, with double zeta quality basis set on the metal cations, were considered for computations at the same levels as those used for free 12t4, using also the 6-311G** basis set. The cc-pVTZ-pp basis set was used for the metal cations. The predicted ground state conformations of the 12t4?CAg⁺, Bi³⁺, Cd²⁺, Cu⁺ and Sb³⁺ cation metal complexes are the C ₄, C ₄, C ₄, C _2v and C ₄ conformations, respectively. This is in agreement with the experimental X-ray data for the 12t4?CAg⁺ and Cd²⁺ cation metal complexes, but experimentally by X-ray, the 12t4?CBi³⁺ and Cu⁺ cation metal complexes have C _s and C ₄ structures, respectively.     

Solid-phase synthesis of 2,6- and 2,7-diamino-4(3H)-quinazolinones via palladium-catalyzed amination

A new procedure for the solid-phase synthesis of 2,6- and 2,7-diamino-4(3H)-quinazolinones is described. The method involves coupling of 2,4,6- and 2,4,7-trichloroquinazoline to a solid support via benzyl alcohol type linkers, subsequent displacement of chlorine at C-2 then at the C-6 or C-7 positions by amines (Fig. 1) and the cleavage of the products from the resin. The palladium-catalyzed amination of C-6 and C-7 positions with a representative set of amines in the presence of 2-(di-t-butylphosphino)biphenyl (DTBPBP), P(t-Bu)₃ and 2,2′-bis(diphenylphosphino)-1,1′-binaphthyl (BINAP) ligands has been investigated. This method should prove to be a useful tool for constructing combinatorial libraries containing the 4(3H)-quinazolinone moiety.     

Coordinatively unsaturated o-quinone complexes of iridum(III) and their role in the isomerization of octahedral complexes

The oxidative addition reaction of tetrachloro-1,2-benzoquinone with trans-{IrCl(N₂)[P(C₆H₅)₃]₂} yields the coordinatively unsaturated complex {IrCl(o-O₂C₆Cl₄)[P(C₆H₅)₃]₂} · C₆H₆ Carbonylation of this complex can be used to prepare two isomers of formula {IrCl(o-O₂C₆Cl₄)(CO)[P(C₆H₅)₃]₂}. These are both different than the isomer obtained by Balch and Sohn from the oxidative addition of the quinone to Vaska's compound. The role of coordinatively unsaturated intermediates in the isomerization reactions of the octahedral carbonyl complexes will be discussed. The five coordinated o-quinone complex reacts with water to give an aquo complex. Two criteria for distinguishing cis- and trans-M[P(C₆H₅)₃]₂ geometries from intensifies of IR bands in the regions 15701590 and 530550 cm^?1 have been tested for octahedral complexes. cis-Ph₃P octahedral complexes of iridium(III) have a band of high intensity in the 534541 cm^?1 region. There is no systematic relationship between the band intensities in the 15701590 cm^?1 region and phosphine geometry.     

Latent ruthenium initiators containing fluoro aryloxide ligands

A new ligand, methyl 2,3,5,6-tetrafluoro-4-oxybenzoate (C₈H₃F₄O₃), combining an electron withdrawing group (C₆F₄) to tune the reactivity with an anchor group (CO₂Me) for immobilization on supports, was used to prepare four new ruthenium initiators, viz. Ru(C₈H₃F₄O₃)₂(CHPh)(3-Br-C₅H₅N)(H₂IMes) and Ru(C₈H₃F₄O₃)₂XL, where X = C,N-(CHCH₂CH₂-2-C₅H₄N) and L = PⁱPr₃, PCy₃ or H₂IMes. The new ligand greatly reduced the reactivity of the ruthenium centre at room temperature. The ¹H NMR and DSC investigation for the ROMP of norbornene dicarboximide monomers clearly demonstrated that the Ru(C₈H₃F₄O₃)₂XL initiators were inactive at room temperature and required elevated temperatures for their activation.     

U¨bergangsmetall—Carbin—Komplexe: LXIV. Von equatorialen,zweikernigen silylcarben-komplexen des rheniumsU¨ber einen neuartigen kationischen silylcarbin-komplex zu axialen carben-komplexen

Decacarbonyldirhenium reacts with LiSi(C₆H₅)₃ to yield, on subsequent alkylation with FCH₃SO₃ or (C₂H₅)₃OBF₄, the equatorial nonacarbonyl[triphenylsily(alkoxy)carbene] dirhenium complexeseq-(CO)₉Re₂C(OR)Si(C₆H₅)₃(Ia, R - CH₃; Ib, R - C₄H₈OCH₃; Ic. R - C₂H₅). Reactions of these compounds with Al₂Cl₆ or Al₂Br₆ produce novel binuclear, cationic silycarbyne complexes, ax-[(CO)₉Re₂CSi(C₆H₅)₃]⁺ AlX₄^- (IIa, X - Cl; IIb, X - Br). Treatment of these complexes with alcohols results in formation of the axial nonacarbonyl(carbene)dirhenium complexesax-(CO)₉Re₂C(OR)Si(C₆H₅)₃ (IIIa, R - CH₃; IIIb, R - C₂H₅). The isomeric carbene complexes Ia and IIIa react with dialkylamine affording the isomeric aminocarbene complexeseq-(CO)₉Re₂C(CH₃)₂]-Si(C₆H₅)₃ (V) andax-(CO)₉Re₂Cl(NR₂)Si(C₆H₅)₃ (IVa, R - CH₃; IVb, R - C₂H₅). Reaction conditions, properties and spectroscopic data of the new compounds are reported.     

Binuclear dinitrogen complexe of aryl- and benzyldicyclopentadienyltitanium(III) compounds

The preparation of the deep-blue diamagnetic dinitrogen complexes (Cp₂TiR)₂N₂ with R=C₆H₅, o-, m-, p-CH₃C₆H₄, C₆F₅, CH₂C₆H₅ is described. Their chemical and physcial properties confirm the formulation in which the R groups are σ-bonded to the Cp₂Ti moiety, and the two nitrogen atoms are equivalent. The heats of formation of the complexes from Cp₂TiR and N₂ in toluene have been determined from spectrophotometric data; for R=C₆H₅, o-, m-, p-CH₃C₆H₄, C₆F₅, CH₂C₆H₅, the values are ?18, ?9, ?17, ?20, ?17 and ?14 kcal·mol^?1, respectively. The solid complexes vary markedly in thermal stability, and are extremely air sensitive. The complexed nitrogen can be completely reduced with sodium naphthalene; after hydrolysis of the products, NH₃ and N₂H₄ are obtained. In the thermolysis of the solids, some of the nitrogen is reduced.     

Syntheses and structural characterization of heterometallic bis(pyrazolyl)methane complexes of rhenium and platinum

The new heterometallic complex {μ-1,3,5-[CH(pz)₂]₃C₆H₃}[Re(CO)₃Br][Pt(p-tolyl)₂]₂ has been prepared by reaction of 1 equiv. of the dimer [Pt(p-tolyl)₂(μ-SEt₂)]₂ with the monometallic rhenium precursor {1,3,5-[CH(pz)₂]₃C₆H₃}Re(CO)₃Br, where 1,3,5-[CH(pz)₂]₃C₆H₃ is the tritopic, arene-linked bis(pyrazolyl)methane ligand 1,3,5-tris[bis(1-pyrazolyl)methyl]benzene. Similarly, the heterometallic complex {μ-1,3,5-[CH(pz)₂]₃C₆H₃}[Re(CO)₃Br]₂[Pt(p-tolyl)₂] has been made by the reaction of the dirhenium compound {μ-1,3,5-[CH(pz)₂]₃C₆H₃}[Re(CO)₃Br]₂ and one-half of an equivalent of [Pt(p-tolyl)₂(μ-SEt₂)]₂. X-ray crystallographic studies of the new compounds reveal significant noncovalent interactions in their molecular and supramolecular structures.     

Synthesis of a new class of unsymmetrical PCP′ pincer ligands and their palladium (II) complexes: X-ray structure determination of PdCl{C6H3-2-CH2PPh2-6-CH2PBu2}

The unsymmetrical PCP′ pincer ligands {C₆H₄-1-CH₂PPh₂-3-CH₂PBu^t₂} and {C₆H₄-1-CH₂PPh₂-3-CH₂PPrⁱ₂} and the corresponding palladium complexes: PdCl{C₆H₃-2-CH₂PPh₂-6-CH₂PBu^t₂} and PdCl{C₆H₃-2-CH₂PPh₂-6-CH₂PPrⁱ₂} have been synthesized in good yields. The molecular structure of PdCl{C₆H₃-2-CH₂PPh₂-6-CH₂PBu^t₂} was determined through a single crystal X-ray diffraction study. The palladium center was found to be located into a slightly distorted square planar environment in which the {C₆H₄-1-CH₂PPh₂-3-CH₂PBu^t₂} ligand is coordinated as a tridentate, PCP pincer type chelate. The complex, PdCl{C₆H₃-2-CH₂PPh₂-6-CH₂PPrⁱ₂} catalyzes the Heck coupling of iodobenzene with styrene.     

Chemical behavior of ortho-hydroquinone-based bis(pyrazol-1-yl)methane ligands in the presence of palladium(II) chloride

The synthesis, structural characterization, and coordination behavior of ditopic ortho-hydroquinone-based bis(pyrazol-1-yl)methane ligands (ortho-(OH)₂C₆H₃-4-CHpz₂, ortho-(OH)₂C₆H₃-4-CH(3-Phpz)₂, and ortho-(OH)₂C₆H₃-4-CH(3-tBupz)₂) with pyrazole, 3-phenylpyrazole, and 3-tert-butylpyrazole as donors are described. The reaction of a soluble PdCl₂-source with ortho-(OH)₂C₆H₃-4-CHpz₂ in acetonitrile yielded the related square-planar N,N-coordinated Pd(II) dichloride complex, whereas treatment of ortho-(OH)₂C₆H₃-4-CH(3-Phpz)₂ or ortho-(OH)₂C₆H₃-4-CH(3-tBupz)₂ with PdCl₂ in acetonitrile resulted in degradation of these ligands. The Pd(II) complexes trans-(3-PhpzH)₂PdCl₂ and trans-(3-tBupzH)₂PdCl₂ were isolated and fully characterized including X-ray diffraction analyses.     

Morphological Changes of Cationic Gemini Surfactants 14-s-14 (s=4,5,6) in the Presence of Additives

The effect of adding aliphatic alcohols (C₄OH, C₅OH, C₆OH) and corresponding amines (C₄NH₂, C₅NH₂, C₆NH₂) on a series of dicationic gemini surfactants with the general formula C₁₄H₂₉(CH₃)₂N⁺?C(CH₂)_s?CN⁺(CH₃)₂C₁₄H₂₉, 2Br^? (14-s-14; s=4,5,6), in the absence and presence of KNO₃, has been studied by viscosity measurements at 303.15?K. As the chain length of the additive increased, the viscosity increased with increasing additive concentration and the extent of the effect followed the sequence: C₆OH>C₅OH>C₄OH; C₆NH₂>C₅NH₂>C₄NH₂. The simultaneous presence of salt and additives showed an increase in ?? _r values due to a synergistic effect. However, for equal chain lengths in the additives, the effect was greater for the n-alcohols. The tendency for the micelles to grow from spherical to rod-like structures is mainly influenced by the spacer chain length. At 303.15?K, the micellar growth was more pronounced for the shorter spacer, i.e. s being 4, which can be interpreted in terms of the short spacer having a higher tendency for micellar growth. Contrary to the cationic geminis, no effect was observed with a conventional surfactant of equal chain length, TTAB, even in the presence of KNO₃ at the same concentration used for the geminis.     

The preparation of cis- and trans-[PtH(C6Cl5)(PEt3)2 and a study of the “hydride-donor capacity” of the complexes trans- [PtH(C6X5(PEt3)2] (X = F and Cl)

The preparations of cis- and trans-[PtH(C₆Cl₅)(PEt₃)₂] by thermal decomposition of cis- and trans-[Pt(OCHO)(C₆Cl₅)(PEt₃)₂], respectively, are reported. Also described are cis- and trans-[Pt(SnCl₃)(C₆Cl₅)(PEt₃)₂], obtained by treating SnCl₂ with cis- and trans-[PtCl(C₆,Cl₅)(PEt₃)₂], respectively. It is shown that while trans- [PtH(C₆Cl₅)(PEt₃)₂] does not form hydride-bridged complexes in the presence of trans-(PtH(MeOH)(PEt₃)₂]⁺, the corresponding complex trans-[PtH(C₆)(PEt₃)₂] reacts with the same solvento complex, in methanol, giving labile [(PEt₃)₂HPt(-μH)Pt(C₆F₅)(PEt₃)₂]⁺.     

Synthesis and properties of aryldicyclopentadienyltitanium(III) compounds

The synthesis and properties of the compounds Cp₂TiR, with R = C₆H₅, o-, m-, p-CH₃C₆H₄, 2,6-(CH₃)₂C₆H₃, 2,4,6-(CH₃)₃C₆H₂, C₆F₅, CH₂C₆H₅, are described. Chemical and physical properties indicate that the R groups are σ-bonded to the titanium atom. The complexes are monomeric, with one unpaired electron per titanium atom. They are very air sensitive, and vary markedly in thermal stability; some of the compounds react with molecular nitrogen, to give complexes of the general formula (Cp₂TiR)₂N₂. Compounds CP₂TiR with R = alkyl could not be isolated.     

The electronic properties of isocyanides at rhenium—dinitrogen binding sites. Preparation and redox properties of the isocyanide complexes trans-[ReCl(CNR)(Ph2PCH2CH2PPh2)2]

The isocyanide complexes trans-[ReCl(CNR)(dppe)₂] (R  Me, Bu^t, C₆H₄CH₃-4, C₆H₄CH₃-2, C₆H₄Cl-4, C₆H₄OCH₃-4 and C₆H₃Cl₂-2,6; dppe  Ph₂PCH₂CH₂PPh₂) have been prepared by isocyanide displacement of dinitrogen from the parent complex trans-[ReCl(N₂)(ddpe)₂]. Their redox properties have been studied by cyclic voltammetry and are interpreted on the basis of the electronic properties and the geometry of the ligating isocyanides which are believed to be bent in these complexes, appearing to exhibit ligand parameter (P_L) values ca. +0.3 V higher than those which would be expected for linear geometry. A very high polarisability (B ? 3.4) is observed for the {ReCl(dppe)₂} site.     

Reactions of (η5-C5H5)2Tir compounds with organic cyanides

The syntheses and properties of the titanium(III) complexes Cp₂Tir · R′CN (R = C₆H₅, o-, m-, p-CH₃C₆H₄, CH₂C₆H₅, C₆F₅, Cl; R′ = CH₃, t-C₄H₉, C₆H₅, o-CH₃C₆H₄, 2,6-(CH₃)₂C₆H₃) are described. In the complexes the nitrogen atom of the cyanide ligands is coordinated to the metal. The thermal stabilities of the complexes depend markedly on R and R′; on heating they undergo a novel reaction in which two cyanide ligands are coupled by formation of a CC bond, while the metal is oxidized to titanium(IV).     

The stereospecificity at the iron center of the decarbonylation of an ironacetyl complex

The dinuclear complex [(h⁵-1-CH₃-3-C₆H₅C₅H₃)Fe(CO)₂]₂ was synthesized by reaction of Fe₂(CO)9 with 1-methyl-3-phenylcyclopentadiene; it was converted to (h⁵-1-CH₃-3-C₆H₅C₅H₃)Fe(CO)₂CH₃ by reduction with sodium amalgam and addition of CH₃l, and thence to (h⁵-1-CH₃-3-C₆H₅C₅H₃)Fe(CO)[P(C₆H₅)₃] (COCH₃) (I) by reaction with P(C₆H₅)₃. The acetyl I was separated into two diastereomerically related pairs of enantiomers. Ia and Ib, by a combination of column chromatography on alumina and crystallization from benzene/pentane. The photochemical decarbonylation of Ia and Ib in benzene or THF solution was examined by ¹H NMR spectroscopy. This reaction proceeds with high stereospecificity (>84% retention or inversion) at the iron center to yield (h⁵-1-CH₃-3-C₆H₈C₅H₃)Fe(CO)[P(C₆H₅)₃]CH₃(II), enriched in the diastereomerically related pairs of enantiomers, IIa and IIb, respectively. Since IIa and IIb epimerize under the photolytic conditions of decarbonylation, the actual stereospecificity of the conversion of I to II is higher than 84%, and likely 100%. This is supported by the data from kinetic studies of the decarbonylation of I and the epimerization of II, carried out under identical photolytic conditions. The implications of the foregoing results to the mechanism of the decarbonylation are considered. Also described herein is the synthesis of other complexes with two asymmetric centers of the general formula (h⁵-cyclopentadienyl)Fe(CO)(L)(COR) and (h⁵-cyclopentadienyl)Fe(CO)(L)R that contain either an unsymmetrically substituted h⁵-cyclopentadienyl ring or a chiral tertiary phosphine.     

Convergent procedure for the synthesis of trifluoromethyl-containing N-(pyridinyl-triazolyl)pyrimidin-2-amines

This study describes a simple and efficient procedure to synthesize a novel series of fourteen 4-substituted N-(5-pyridinyl-1H-1,2,4-triazol-3-yl)-6-(trifluoromethyl)pyrimidin-2-amines, where the 4-substituents are H, CH₃, C₆H₅, 4-FC₆H₄, 4-CH₃C₆H₄, 4-CH₃OC₆H₄ and 2-Furyl; from the cyclocondensation reaction of N-[5-(pyridinyl)-1H-1,2,4-triazol-3-yl]guanidines with 4-alkoxy-4-alkyl(aryl/heteroaryl)-1,1,1-trifluoroalk-3-en-2-ones. The reactions were carried out in ethanol under reflux for 18 h and led to 40-68% yields. N-(Pyridyl-triazolyl)guanidine precursors were further obtained from reactions of cyanoguanidine with nicotinic or isonicotinic acid hydrazides and the halogenated enones from trifluoroacetylation of enolethers or acetals.