Chelation controlled regiospecific O-substitution of myo-inositol orthoesters: convenient access to orthogonally protected myo-inositol derivatives

A general method for the completely regioselective protection of the three secondary hydroxyl groups of orthoester derivatives of myo-inositol, utilizing the subtle differences in reactivity exhibited by its alkali metal alkoxides due to differences in their ability to form chelates, is described. This method provides convenient access to orthogonally protected myo-inositol derivatives. A comparison of the methylation of racemic 4-O-trityl-myo-inositol 1,3,5-orthoformate in the presence of sodium or lithium ions showed that stabilization of the C4-alkoxide by chelation with lithium overrides steric hindrance offered by the C6-axial substituent in deciding the regioselectivity during the nucleophilic O-substitution.     

ZnCl2-catalyzed hydrodefluorination of gem-difluoromethylene derivatives with lithium aluminum hydride

Hydrodefluorination of gem-difluoromethylene derivatives with lithium aluminum hydride in the presence of a catalytic amount of ZnCl₂ in good to high yields was described. A possible mechanism is also suggested.     

NaIO4-mediated C-H activation of alkylbenzenes and alkanes with LiBr

NaIO₄ oxidizes lithium bromide efficiently under acidic conditions to functionalize alkylbenzenes and alkanes and produce the corresponding bromo and acetoxy derivatives in excellent yields. The protocol also demonstrates the direct conversion of cyclohexane into trans-1,2-dibromocyclohexane in moderate yield.     

Efficient synthesis of new imidazo[1,2-b][1,2]benzothiazine 4,4-dioxide derivatives via lateral lithiation of N-mesitylenesulfonyl hydantoins

N-Mesitylenesulfonyl hydantoins, readily available from commercial α-amino acids, undergo lateral lithiation with an excess of lithium diisopropylamide and tetramethylethylenediamine in the presence of trimethylsilyl chloride to provide new imidazo[1,2-b][1,2]benzothiazin-2-one 4,4-dioxide derivatives in yields ranging from 44-65%.     

Synthesis of chiral vicinal C2 symmetric and unsymmetric bis(sulfonamide) ligands based on trans-1,2-cyclohexanediamine by aminolysis of N-tosylaziridines

The ring opening of N-tosylaziridines with aliphatic amines can be efficiently catalyzed by lithium perchlorate to provide derivatives of the trans-1,2-diamine in high yields. The reaction was used in desymmetrization of several cyclic N-tosylaziridines using chiral amines. Using this strategy, an efficient synthesis of chiral vicinal C₂ symmetric bis(sulfonamide) and unsymmetrical bis(sulfonamide) ligands based on trans-1,2-cyclohexanediamine was developed.     

Diastereoselective lithium salt-assisted 1,3-dipolar cycloaddition of azomethine ylides to the fullerene C60

An efficient method for the diastereoselective synthesis of 5-substituted 3,4-fulleroproline esters based on the lithium salt-assisted cycloaddition of azomethine ylides has been developed. A series of the fulleroproline esters containing either electron donating or electron withdrawing substituents was prepared with high yields and diastereoselectivities provided by the S-trans-configuration of ylide generated in situ from the corresponding Schiff base in the presence of a lithium salt and base. This method provides easy preparation of 3,4-fulleroproline derivatives suitable for fullerene-based peptide synthesis.     

Convenient synthesis of 4-tert-butyl 2-ethyl 3-amino-1-benzyl-5-dialkylamino-1H-pyrrole-2,4-dicarboxylate derivatives

Optimization details and limitations of a novel synthetic method of 4-tert-butyl 2-ethyl 3-amino-1-benzyl-5-dialkylamino-1H-pyrrole-2,4-dicarboxylate derivatives are herein disclosed. This synthesis consists of four steps that include a highly selective cyclization, and can be carried out from starting materials to target compounds without column chromatography purification. The high selectivity is controlled by lithium coordination and steric hindrance caused by tert-butyl ester.     

Determination of airborne isocyanates as di-n-butylamine derivatives using liquid chromatography and tandem mass spectrometry

A method for the determination of isocyanates as di-n-butyl amine (DBA) derivatives using tandem mass spectrometry (MS/MS) and electrospray ionisation (ESI) is presented. Multiple-reaction monitoring (MRM) of the protonated molecular ions and corresponding deuterium-labelled d₉-DBA derivatives resulted in selective quantifications with correlation coefficients >0.998 for the DBA derivatives of isocyanic acid (ICA), methyl isocyanate (MIC), ethyl isocyanate (EIC), propyl isocyanate (PIC), phenyl isocyanate (PhI), 1,6-hexamethylene diisocyanate (HDI), 2,4-, 2,6-toluene diisocyanate (TDI), isophorone diisocyanate (IPDI), 4,4′-methylenediphenyl diisocyanate (MDI), 3-ring MDI, 4-ring MDI, HDI-isocyanurate, HDI-diisocyanurate, HDI-biuret and HDI-dibiuret. The instrumental precision for 10 repeated injections of a solution containing 0.1 μg ml⁻¹ of the studied derivatives was <2%. Performing MRM of the product ion [DBA + H]⁺ (m/z = 130) from the protonated molecular ion resulted in the lowest detection limits, down to 10 amol (for TDI). Quantification of concentrations below 10⁻⁶ of the occupational exposure limit (OEL) for TDI during 10 min of air sampling was made possible. In an effort to control the formation of alkali adducts, addition of lithium acetate to the mobile phase and monitoring of lithium adducts was evaluated. Having lithium present in the mobile phase resulted in complete domination of [M + Li]⁺ adducts, but detection limits for the studied compounds were not improved. Different deuterium-labelled derivatives as internal standards were evaluated. (1) DBA derivatives of deuterium-labelled isocyanates (d₄-HDI, d₃-2,4-TDI, d₃-2,6-TDI and d₂-MDI), (2) d₉-DBA derivatives of the corresponding isocyanates and (3) d₁₈-DBA derivatives of the corresponding isocyanates. An increase in number of deuterium in the molecule of the internal standard resulted in an increase in instrumental precision and a decrease in correlation within calibration series.     

A synthesis of 17-epi-calcidiol

The first synthetic approach to 17-epi-calcidiol 4 and congeners is presented. Key steps of the synthesis involve Pd-catalyzed reaction of the androst-16-ene derivative 6 with alkyl diazoacetates producing the respective cyclopropane derivatives 5, and lithium in liquid ammonia reduction of 5 leading to 17α-pregnane-20-carboxylic acid derivatives 9. The side chain was attached to ester 19 in a known manner.     

Double nitro-Mannich reaction utilizing in situ generated N-trimethylsilylaldimines: novel four-component one-pot synthesis of nitroimines

Four-component synthesis of nitroimine derivatives (3) via double nitro-Mannich reaction was carried out in which nitroalkane, two moles of aldehyde, and lithium hexamethyldisilazide (LHMDS) were coupled in one-pot. In situ generated N-trimethylsilylaldimine was reacted with nitroalkane dianion followed by the second addition of the resulting nitrogen anion to the aldimine and the subsequent elimination of bistrimethylsilylamine furnished nitoroimine. The reaction was proceeded with erythro selectivity.     

Construction of bicyclic systems containing an oxygen bridge by isomerization of cyclic epoxy alcohols

A novel method for constructing a 7-oxabicyclo[2.2.1]heptane skeleton was developed. The substrates, namely cis-3,4-epoxy-1-cyclohexanol derivatives, were prepared from the corresponding 3-cyclohexen-1-ol derivatives via a stereoselective epoxidation reaction using a vanadium catalyst. Upon heating with lithium iodide in propionitrile, the cis-epoxy alcohol was transformed into the 7-oxabicyclo[2.2.1]heptane derivative in high yield. The reaction proceeds through formation of a lithium alkoxide bearing an iodohydrin moiety, followed by an intramolecular S_N2 reaction.     

Chemoselective reduction of aldehydes and ketones by potassium diisobutyl-t-butoxy aluminum hydride (PDBBA)

t-Butoxy derivatives of DIBALH [lithium diisobutyl-t-butoxyaluminum hydride (LDBBA), sodium diisobutyl-t-butoxyaluminum hydride (SDBBA), and potassium diisobutyl-t-butoxyaluminum hydride (PDBBA)] were examined as chemoselective reducing agents of carbonyl compounds. Among them, PDBBA was found to be the most efficient for the reduction of aldehydes and ketones to the corresponding alcohols in the presence of ester, amide, and nitrile substituents at ambient temperature. In addition, the optimal conditions gave higher chemoselectivity for aldehydes in the presence of ketones.     

Solution phase structures of enantiopure and racemic lithium N-benzyl-N-(α-methylbenzyl)amide in THF: low temperature 6Li and 15N NMR spectroscopic studies

The antipodes of lithium N-benzyl-N-(α-methylbenzyl)amide are highly efficient enantiopure ammonia equivalents for the asymmetric synthesis of β-amino acid derivatives via conjugate addition to α,β-unsaturated esters. ⁶Li and ¹⁵N NMR spectroscopic studies of doubly labelled ⁶lithium (S)-¹⁵N-benzyl-¹⁵N-(α-methylbenzyl)amide in THF at low temperature reveal the presence of lithium amide dimers as the only observable species. Either a monomeric or dimeric lithium amide reactive species can be accommodated within the transition state mnemonic for this class of conjugate addition reaction. This enantiopure lithium amide offers unique opportunities over achiral (e.g., lithium dibenzylamide) and C₂-symmetric (e.g., lithium bis-N,N-α-methylbenzylamide) counterparts for further mechanistic study owing to the ready distinction of the various dimers formed.     

Reactions of lithium derivatives of o- and m-carboranes with 5,6-benzocoumarin and 5,6-benzo-3-ethoxycarbonylcoumarin

Reactions of lithium derivatives o- and m-carborane with 5,6-benzocoumarin and 5,6-benzo-3-ethoxycarbonylcoumarin have been studied.     

A synthesis of bicyclo[n.1.0]alkanes having tert-butyl carboxylate or acetamide moiety via the intramolecular 1,3-CH insertion of magnesium carbenoids

Treatment of 1-chlorovinyl p-tolyl sulfoxides, derived from various cyclic ketones and chloromethyl p-tolyl sulfoxide, with lithium enolate of carboxylic acid tert-butyl esters or N,N-dimethylacetamide gave adducts in high yields. The adducts were treated with ether solution of isopropylmagnesium chloride in dry toluene to give bicyclo[n.1.0]alkane derivatives having tert-butyl carboxylate or acetamide moiety on the bridgehead carbon in high to quantitative yields via magnesium carbenoid 1,3-CH insertion reaction. The 1,3-CH insertion reaction proved to be regioselective and stereospecific. The reaction mechanism and origin of the selectivity and specificity are discussed.     

A concise approach to CF3-containing furan-3-ones, (bis)pyrazoles from novel fluorinated building blocks based on 2,3-butanedione

1,1,1-Trifluoro-4,5,5-trimethoxyhex-3-en-2-one and lithium (2Z)-1,1,1-trifluoro-5,5-dialkoxy-4-oxohex-2-en-2-olate were synthesized for the first time via direct trifluoroacetylation of 2,3-butanedione acetal derivatives. A simple and effective approach to acetal or acyl substituted CF₃-pyrazoles, 5,5′-bis(trifluoromethyl)-3,3′-bipyrazole, and, to 5-trifluoromethylfuran-3-ones is presented.     

An efficient process for the bromolactamization of unsaturated acids

Bromolactamization of the N-Boc derivatives of unsaturated amides using N-bromosuccinimide and lithium t-butoxide in tetrahydrofuran occurs smoothly to give excellent yields of bromo N-Boc α-lactams, which are valuable as synthetic intermediates.     

Synthesis of 4-unsubstituted 2H-1,2,3-benzothiadiazine 1,1-dioxides via ortho lithiation of protected benzaldehyde derivatives

Variously substituted 2-phenyl-1,3-dioxolanes and 2-(2-bromophenyl)-1,3-dioxolanes, prepared from the corresponding benzaldehydes, were lithiated ortho to the acetal group. Reaction of the lithio derivatives with sulfur dioxide led to the lithium sulfinate salts, which gave, upon oxidative chlorination with sulfuryl chloride, the corresponding benzenesulfonyl chlorides. Then, depending on the aromatic substitution pattern of the molecule, several protocols were elaborated for the functional group transformations leading to the target compounds. Ring closure was performed with hydrazine hydrate or acetylhydrazine, in the latter case with one-pot removal of the acetyl group. The 4-unsubstituted 2H-1,2,3-benzothiadiazine 1,1-dioxides thus obtained are potential drug candidates based on their structural similarity to biologically active phthalazinones.     

The synthesis and 1H NMR study of vinyl organometallic monomers: (η5-C5H4CHCH2)M(CO)2(NO) (M = Cr,Mo, W) and (η5-C5H4CHCH2)M(CO)2 (M = Co,Rh, Ir)

A reaction between 6-methylfulvene and lithium diisopropylamide in THF solution produces vinylcyclopentadienyllithium in yields of 85–95%. The ¹H NMR spectrum of this air-sensitive organlithium reagent has been recorded in THF-d₈. Reactions of vinylcyclopentadienyllithium with Group VIB metal hexacarbonyls followed by treatment with N-methyl-N-nitroso-p-toluenesulfonamide afford the new vinyl organometallic monomers (η⁵-C₅H₄CHCH₂)M(CO)₂(NO) (M = Mo, W). Vinylcyclopentadienyllithium also serves as a convenient precursor to a series of (η⁵-vinylcyclopentadienyl)dicarbonylmetal monomers of cobalt, rhodium, and iridium. The ¹H NMR spectra of these vinylcyclopentadienylmetal derivatives have been compared as a function of the metal.     

Organocuivreux vinyliques : IX. Addition de derives organiques du cuivre sur l'acetylene

The addition of various alkylcopper derivatives to acetylene is described. The best reagents are lithium dialkylcuprates in ether which form Z-dialkenylcuprates. ω-Funtionalized dialkylcuprates also add cleanly to acetylene. The Z-dialkenylcuprates thus obtained are iodinated to afford stereospecifically Z-1-iodoalkenes.