1,4-Addition of arylboronic acids to β-aryl-α,β-unsaturated ketones and esters catalyzed by a rhodium(I)-chiraphos complex for catalytic and enantioselective synthesis of selective endothelin A receptor antagonists

An enantioselective synthesis of acyclic β-diaryl ketones and esters via 1,4-addition of arylboronic acids to β-aryl-α,β-unsaturated ketones or esters is described. The complex in situ prepared from [Rh(nbd)₂]BF₄ and chiraphos was found to be an excellent catalyst to achieve high enantioselectivities in a range of 83-89% ee for the ketone derivatives and 78-94% ee for tert-butyl β-arylacrylate derivatives. The protocol provided a catalytic method for the enantioselective synthesis of selective endothelin A receptor antagonists (7, 8) reported by SmithKline Beecham and Merck-Banyu. The enantioselection mechanism and efficiency of the chiraphos ligand for β-aryl-α,β-unsaturated ketones and esters are discussed on the basis of results of DFT computational studies on the modes of coordination of the enone substrates to the phenylrhodium(I)-(S,S)-chiraphos complex.     

Reaction of organozinc reagents formed in reaction of dibromomalonic acid dialkyl esters and zinc, with 2-arylmethylenemalonic acid dinitriles and 3-aryl-2-cyanopropenoic acid methyl esters

Organozinc compounds, obtained from dibromomalonic acid dialkyl esters and zinc, react with 2-arylmethylmalonic acid dinitriles and 3-aryl-2-cyanopropenoic acid methyl esters forming 3-aryl-2,2-dicyanocyclopropane-1,1-dicarboxylic acid dialkyl esters and 3-aryl-2-cyanocyclopropane-1,1,2-tricarboxylic acid trimethyl esters. ¹H and ¹³C NMR, ³ J _CH constants are considered.     

Lithium perchlorate-induced electrophilic activation: one-pot synthesis of 3-aryl-2-thioxotetrahydropyrimidin-4-one derivatives from aryl isothiocyanates

A novel methodology for the synthesis of N-substituted-3-aryl-2-thioxotetrahydropyrimidin-4(1H)-one derivatives had been developed by the condensation of aryl isothiocyanates with β-amino esters using lithium perchlorate as a catalyst and triethylamine as a base. This strategy not only overcomes the disadvantages of the reported methods but also provides high yield of the product in short span of time by an easily workable procedure.     

One-pot synthesis of alkyl 3-aryl-2-(4-phenyl-1<Emphasis Type="Italic">H</Emphasis>-1,2,3-triazol-1-yl)propanoates

Reaction of 3-aryl-2-bromopropanoic acids esters, products of the Meerwein arylation, with sodium azide afforded alkyl 2-azido-3-arylpropanoates. The latter react with ethyl acetoacetate and phenylacetylene to form 1,2,3-triazole derivatives. A one-pot method for the synthesis of 3-aryl-2-(4-phenyl-1H-1,2,3-triazol-1-yl)-propanoic acid esters via a tricomponent reaction of alkyl 2-bromo-3-arylpropanoates, sodium azide, and phenylacetylene in the presence of CuI was developed.     

Fluoroalkyl substituted (Z)-dehydro α-amino ester as a building block for the fluorine-containing cyclopropyl α-amino esters and dihydrooxazole

Multi-functionalized β-trifluoromethyl and β-difluoromethyl substituted (Z)-α,β-dehydro α-amino esters have been successfully prepared from N-protected fluorinated threonine ester. Applications of this new fluorine-containing building block to the synthesis of biologically important fluorinated cylcopropyl α-amino esters and dihydrooxazole ester have also been reported.     

A convenient synthesis of dihydro- and tetrahydro-1,3-thiazine derivatives from β-aryl-β-amino acids

A facile synthesis of 2-alkyl-4-aryl-5,6-dihydro-4H-1,3-thiazines and cis-2-alkyl-4-aryl-3,4,5,6-tetrahydro-2H-1,3-thiazines with potential therapeutic interest was achieved starting from readily accessible β-aryl-β-amino acids.     

Readily available chiral phosphine–aminophosphine ligands derived from 1-phenylethylamine for Rh-catalyzed enantioselective hydrogenations

A series of new chiral phosphine–aminophosphine ligands have been prepared via a two- or three-step transformation from commercially available and inexpensive (S)-1-phenylethylamine, and successfully used in the rhodium-catalyzed asymmetric hydrogenation of various enamides, β-dehydroamino acid esters, and dimethyl itaconate. The results show that the ligand structure plays an important influence on both the reactivity and enantioselectivity. Ligand 2d bearing a N–H proton and two F-atoms on the 3,5-positions of the phenyl ring of the aminophosphino moiety was most effective for the hydrogenation of enamides and (Z)-β-aryl-β-(acylamino)acrylates, whereas ligand 1b showed the highest enantioselectivities in the hydrogenation of (Z)-β-alkyl-β-(acylamino)acrylates and dimethyl itaconate.     

Chemistry of iminofuran: VIII. Recyclization of 5-aryl-3-arylimino-3H-furan-2-ones effected by cyanoacetic acid derivatives

The recyclization of 5-aryl-3-arylimino-3H-furan-2-ones under the action of esters, nitriles, and amides of cycnoacetic acids resulted in the corresponding esters, nitriles, and amides of (5E)-2-amino-1-aryl-4-oxo-5-(2-oxoethylidene)-1H-4,5-dihydropyrrole-3-carboxylic acids.     

Electroreductive five- and six-membered cyclization of aromatic β- and γ-imino esters derived from (S)-aspartic acid and (S)-glutamic acid

The electroreduction of aromatic β-dimethylcarbamoyl-β-imino esters, prepared from (S)-aspartic acid, in the presence of chlorotrimethylsilane gave five-membered cyclized products, 1-benzoyl-4-hydroxy-5-aryl-N,N-dimethylpyrrolidine-2-carboxamides and 5-(dimethylcarbamoyl)-2-aryl-1H-pyrrol-3-yl benzoates, depending on the post-treatment after the electroreduction. The electroreduction of aromatic γ-dialkylcarbamoyl-γ-imino and γ-methoxylmethyl-γ-imino esters, prepared from (S)-glutamic acid, and following transformation gave six-membered cyclized products, 1-benzoyl-5-hydroxy-N,N-dialkyl-6-phenylpiperidine-2-carboxamides and 3-hydroxy-6-(methoxymethyl)-2-phenylpiperidin-1-yl)(phenyl)methanones, respectively.     

First synthesis of 1-aryl-4,4-dichlorobut-3-en-1-ones. The electrochemical reduction of 1-aryl-4,4,4-trichlorobut-2-en-1-ones as a key step

The first method for the synthesis of 1-aryl-4,4-dichlorobut-3-en-1-ones is reported. Treatment of acetophenones with anhydrous chloral leads to 1-aryl-4,4,4-trichloro-3-hydroxybutan-1-ones in near quantitative yields. These compounds were efficiently dehydrated with either sulfuric or p-toluenesulfonic acid to give 1-aryl-4,4,4-trichlorobut-2-en-1-ones, which were selectively converted to the title compounds in fair to quantitative yields by electrochemical reduction. The X-ray crystallographic structure of 4,4-dichloro-1-(4-methoxyphenyl)but-3-en-1-one has been determined. The preferential formation of β,γ-unsaturated ketones with total exclusion of the corresponding α,β-unsaturated isomers has been discussed with the aid of HF and B3LYP density functional theory methods.     

Synthesis of 2-aryl-3,3,3-trifluoropropanoic acids using electrochemical carboxylation of (1-bromo-2,2,2-trifluoroethyl)arenes and its application to the synthesis of β,β,β-trifluorinated non-steroidal anti-inflammatory drugs

Electrochemical carboxylation of (1-bromo-2,2,2-trifluoroethyl)arenes resulted in an efficient fixation of carbon dioxide to give the corresponding 2-aryl-3,3,3-trifluoropropanoic acids in good yields, and the present reactions were successfully applied to the synthesis of β,β,β-trifluorinated non-steroidal anti-inflammatory drugs (NSAIDs).     

Palladium-catalyzed C-N bond formation: synthesis of 1-aryl-1H-pyrazoles from β-bromovinyl aldehydes and arylhydrazines

Cyclic and acyclic β-bromovinyl aldehydes are cyclized with an array of arylhydrazines in toluene at 125 °C in the presence of a palladium catalyst and a phosphorus chelating ligand together with NaO^tBu to give 1-aryl-1H-pyrazoles in moderate to good yields.     

Aminovinyl ketones and aminovinyl esters as CCN building blocks for the synthesis of 1H-pyrrolo[3,2-e]1,2,4-triazines

5,6-Unsubstituted-3-aryl-1,2,4-triazines were found to react with aminovinyl ketones and aminovinyl esters in acetic anhydride to form derivatives of 3a,4,7,7a-tetrahydro-1H-pyrrolo[3,2-e]1,2,4-triazines in good yields.     

Synthesis and properties of 5-ferrocenyl-1H-pyrazole-3-carbaldehydes

New ferrocene derivatives - ethyl esters of 1-aryl-5-ferrocenyl-1H-pyrazole-3-carboxylic acids were synthesized. The corresponding aldehydes were obtained from acid esters in two steps. The reductive amination reaction of 5-ferrocenyl-1-phenyl-1H-pyrazole-3-carbaldehyde was studied. Several of these compounds were investigated by cyclic voltammetry. All of them exhibited a reversible one-electron oxidation-reduction wave owing to the ferrocene-ferricinium redox couple with a positive shift (0.51-0.69 V) compared with that of ferrocene (0.46 V). The X-ray crystal structure of the ethyl ether 1-(3-chloro-2-fluorophenyl)-5-ferrocenyl-1H-pyrazole-3-carboxylic acid is also presented.     

Methyl 1-imidazolecarbodithioate as a thiocarbonyl transfer reagent: a facile one-pot, three-component synthesis of novel 2-substituted-5-aryl-1-oxo-3-thioxo-1,2,3,5,11,11a-hexahydro-6H-imidazo-[1,5-b]-β-carbolines

An efficient one-pot, three-component synthesis of novel 2-substituted-5-aryl-1-oxo-3-thioxo-1,2,3,5,11,11a-hexahydro-6H-imidazo-[1,5-b]-β-carbolines employing 1-aryl-1,2,3,4-tetrahydro-β-carboline-3-carboxylates, primary amines (or amino acid esters) and methyl 1-imidazolecarbodithioate as the thiocarbonyl transfer reagent is reported.     

New approach to exclusive formation of both enantiomers of β-amino acid derivatives

A highly selective two-step approach to chiral β-amino esters via the hydride reductive amination of chiral allenes is reported. β-Enamino esters were obtained from the nucleophilic addition of amines to 2,3-allenoates bearing a chiral auxiliary. The reduction of the (1R)-(−)-10-phenylsulfonylisobornyl β-enamino esters gave the corresponding β-amino esters with S configuration whereas the reduction of the (1S)-(+)-10-phenylsulfonylisobornyl β-enamino esters led to β-amino esters with R configuration. The rationalization of the observed selectivity was supported by semi-empirical molecular orbital calculations (PM3).     

Novel two step synthesis of bis/Mono 1-aryl-1H-tetrazole-5-carboxylic acid

Some novel compounds of bis/mono 1-aryl-1H-tetrazole-5-carboxylic acid are synthesized by the hydrolysis of two different synthesized esters, they are ethyl-1-aryl-1H-tetrazole-5-carboxylate and ethyloxo(1-aryl-1H-tetrazol-5-yl)acetate. The ethyl-1-aryl-1H-tetrazole-5-carboxylate is resistant to get hydrolyzed, whereas the ethyloxo(1-aryl-1H-tetrazol-5-yl) acetate undergoes hydrolysis process and converts the ester to title compound. All the synthesized compounds are characterized by IR, ¹H and ¹³C NMR, mass and elemental analysis.The ethyl-1-aryl-1H-tetrazole-5-carboxylateis optimized by DFT B3LYP method and the HOMO and LUMO energy is 5.14?eV and also there is a formation of a weak bond between O₁₈ and C₈ as observed from the AIM analysis result.     

α-(1H-Imidazol-1-yl)alkyl (IMIDA) carboxylic acid esters as prodrugs of carboxylic acid containing drugs

Synthesis of α-(1H-imidazol-1-yl)alkyl (IMIDA) carboxylic acid esters have been reported in 2-3 simple steps. α-(1H-Imidazol-1-yl)alkyl (IMIDA) carboxylic acid esters were found to be chemically labile and thus serve as novel prodrugs of carboxylic acids.     

Trading N and O. Part 2: Exploiting aziridinium intermediates for the synthesis of β-hydroxy-α-amino acids

The β-hydroxy-α-amino acids (S,S)-allo-threonine, (S,S)-β-hydroxyleucine and a range of aryl substituted (S,S)-β-hydroxyphenylalanines were prepared from the corresponding enantiopure anti-α-hydroxy-β-amino esters via a rearrangement protocol, which proceeds via the intermediacy of the corresponding aziridinium ions. The starting anti-α-hydroxy-β-amino esters were prepared in >99:1 dr using our diastereoselective aminohydroxylation procedure, whereby conjugate addition of lithium (R)-N-benzyl-N-(α-methylbenzyl)amide to an α,β-unsaturated ester is followed by oxidation of the resultant enolate with (−)-camphorsulfonyloxaziridine. Subsequent activation of the hydroxyl group within the anti-α-hydroxy-β-amino esters promoted aziridinium ion formation [which proceeds with inversion of configuration at C(2)], and regioselective ring-opening of the intermediate aziridinium ions with H₂O [which proceeds with inversion of configuration at C(3)] gave the corresponding anti-β-hydroxy-α-amino esters as single diastereoisomers (>99:1 dr). Deprotection of these substrates via sequential hydrogenolysis and ester hydrolysis gave the corresponding β-hydroxy-α-amino acids in good yield and high diastereoisomeric and enantiomeric purity.     

Multicomponent Hantzsch cyclocondensation as a route to highly functionalized 2- and 4-dihydropyridylalanines, 2- and 4-pyridylalanines, and their N-oxides: preparation via a polymer-assisted solution-phase approach

An improved and efficient entry to highly functionalized β-(2-pyridyl)- and β-(4-pyridyl)alanines and the corresponding 1,4-dihydro and N-oxide derivatives has been developed by one-pot thermal Hantzsch-type cyclocondensation of aldehyde-ketoester-enamine systems in which one of the reagents (aldehyde or ketoester) was carrying the unmasked but protected chiral glycinyl moiety. Thus coupling N-Boc-O-benzyl aspartate β-aldehyde, acetoacetate and aminocrotonate esters afforded tetrasubstituted β-(4-dihydropyridyl)alanines (75% yield). One of these products was almost quantitatively transformed into the β-(4-pyridyl)alanine derivative which in turn was oxidized to the corresponding N-oxide. Each of these enantiomerically pure (Mosher's amide analysis) heterocyclic α-amino acids was incorporated into a tripeptide by coupling with (S)-phenylalanine. In a similar way tetrasubstituted β-(2-dihydropyridyl)alanine, β-(2-pyridyl)alanine and β-(1-oxido-2-pyridyl)alanine were prepared via Hantzsch cyclocondensation reaction using benzaldehyde, aminocrotonate, and acetoacetate carrying the N-Boc-O-benzyl glycinate moiety. It was shown that the work up of the reaction mixtures derived from the cyclocondensation and oxidation reactions can be carried out by the use of polymer supported reagents and sequestrants thus allowing the isolation of the products in high purity without any chromatography.