Interplay of fidelity, binding strength, and structure in supramolecular polymers

In studies of a supramolecular network of polymers formed by self-association of UPy or UG recognition units displayed along a poly(butyl methacrylate) (PBMA) backbone, it was unexpectedly found that the more weakly dimerizing (Kdimer approximately 200 M-1) UG unit produced more assembly than did the very strongly dimerizing UPy unit (Kdimer = 2 x 107 M-1). Likewise, in examining supramolecular blends mediated by the heterocomplexation of DAN and UPy, which occurs upon the mixing of polystyrene containing the DAN unit (PS-DAN) and PBMA-UPy, increasing the mol % of UPy did not produce increased viscosity. 1H NMR showed that both observations can be explained by the intramolecular recognition of UPy. Structural studies show that the length of the chain linking the UPy unit to the backbone is critical, with longer linkers favoring intermolecular dimers. An interplay of linker chain length, polymer Mw, recognition unit mol %, and fidelity determines the extent of network growth.     

Titanium alkoxides as initiators for the controlled polymerization of lactide

Fourteen titanium alkoxides were synthesized for comparison of their catalytic properties in the bulk and solution polymerization of lactide (LA). In bulk polymerizations, they are effective catalysts in terms of polymer yield and molecular weight. Titanatranes gave polylactides with significantly increased molecular weight over more extended polymerization times, and those with five-membered rings afforded polymers in higher yields and with larger molecular weights than their six-membered ring counterparts. Steric hindrance of the rings was found to significantly affect polymer yields. Increased heterotactic-biased poly(rac-LA) was formed as the number of chlorine atoms increased in TiCl(x)(O-i-Pr)(4)(-)(x). In solution polymerizations, titanium alkoxides catalyzed controlled polymerizations of LA, and end group analysis demonstrated that an alkoxide substituent on the titanium atom acted as the initiator. That polymerization is controlled under our conditions was shown by the linearity of molecular weight versus conversion. A tendency toward formation of heterotactic-biased poly(rac-LA) was observed in the solution polymerizations. The rate of ring-opening polymerization (ROP) and the molecular weight of the polymers are greatly influenced by the substituents on the catalyst, as well as by factors such as the polymerization temperature, polymerization time, and concentration of monomer and catalyst.     

主链含四重氢键基元聚氨酯的合成与性能

合成了一种新型含有UPy(2-ureido-4[1H]-pyrimidone)基团的二羟基化合物,以此二羟基化合物作扩链剂,通过与聚氨酯预聚体进行的扩链反应,制备了一系列主链含UPy的聚氨酯(PU-UPy).傅里叶红外光谱(FTIR)、氢核磁共振(1H-NMR)等测试结果表明,在聚氨酯主链中确实含有UPy链段.同时,热性能及力学性能测试表明,聚氨酯中的UPy二聚体会集聚而形成微晶,熔点在60℃附近.在聚氨酯主链中引入UPy,能大幅提高聚氨酯的力学性能,调整软段的分子量,以及在主链中UPy含量可改变聚氨酯弹性体的断裂伸长率和抗张强度.     

Dimensionally confined nanosheets self-assembled through self-shielding multiple hydrogen bonding interactions in aqueous media

Herein, we adopt a simple supramolecular strategy to effectively control the tautomerism of ureidopyrimidinone (UPy) moiety and ultimately realize the complete arrangement of enol configuration. The obtained UPy derivatives containing self-complementary quadruple hydrogen bonding interactions can spontaneously self-assemble towards the formation of well-controlled, self-organized supramolecular nanostructure morphologies in both chloroform and water. The resulting aggregates had been fully characterized by various spectroscopy (absorption, emission) and microscopy (TEM, SEM and AFM) studies. It is anticipated that this study can provide an exact and excellent monomeric unit for controllable and precise supramolecular polymerization. The results achieved here also demonstrate the utility and feasibility of multiple hydrogen bonds to direct the self-assembly of small-molecule building blocks in aqueous media, which provides a strategy for the construction of well-defined and stable supramolecular architectures with chemical functionalities and physical properties as advanced materials for biological applications.     

Coils,Rods and Rings in Hydrogen‐Bonded Supramolecular Polymers

The article discusses the development and properties of supramolecular polymers based on quadruple hydrogen bonds between self‐complementary ureidotriazine (UTr) and ureidopyrimidinone (UPy) functional groups. The high association constant with which these groups dimerize leads to polymers with a high degree of polymerization in isotropic solution. Application of these units for the functionalization of telechelic polymers results in new materials with mechanical properties approaching those of covalent polymers, but with a much stronger temperature‐dependent behavior. Solvophobic interactions between the hydrogen bonding moieties may be used to obtain supramolecular polymers with a well defined helical columnar architecture. Another consequence of the high dimerization constant of the UPy group is the phenomenon of a critical concentration in solutions of many bifunctional monomers. Below this concentration, only cycles are present, while above the critical concentration, the amount of cycles remains constant, and a polymer is formed. Conformational properties of the linker units are used to control the equilibrium between polymers and cycles, and are proposed to form a promising strategy toward tunable materials.

Supramolecular polymer material with elastomeric properties resulting from functionalization with UPy groups. (Reproduced with permission. © John Wiley & Sons, Inc.)     

Renal Epithelial Monolayer Formation on Monomeric and Polymeric Catechol Functionalized Supramolecular Biomaterials

Induction of a functional, tight monolayer of renal epithelial cells on a synthetic membrane to be applied in a bioartificial kidney device requires for bio‐activation of the membrane. The current golden standard in bio‐activation is the combination of a random polymeric catechol (L‐DOPA) coating and collagen type IV (Col IV). Here the possibility of replacing this with defined monomeric catechol functionalization on a biomaterial surface using supramolecular ureido‐pyrimidinone (UPy)‐moieties is investigated. Monomeric catechols modified with a UPy‐unit are successfully incorporated and presented in supramolecular UPy‐polymer films and membranes. Unfortunately, these UPy‐catechols are unable to improve epithelial cell monolayer formation over time, solely or in combination with Col IV. L‐DOPA combined with Col IV is able to induce a tight monolayer capable of transport on electrospun supramolecular UPy‐membranes. This study shows that a random polymeric catechol coating cannot be simply mimicked by defined monomeric catechols as supramolecular additives. There is still a long way to go in order to synthetically mimic simple natural structures.     

Development of Non‐Cell Adhesive Vascular Grafts Using Supramolecular Building Blocks

Cell‐free approaches to in situ tissue engineering require materials that are mechanically stable and are able to control cell‐adhesive behavior upon implantation. Here, the development of mechanically stable grafts with non‐cell adhesive properties via a mix‐and‐match approach using ureido‐pyrimidinone (UPy)‐modified supramolecular polymers is reported. Cell adhesion is prevented in vitro through mixing of end‐functionalized or chain‐extended UPy‐polycaprolactone (UPy‐PCL or CE‐UPy‐PCL, respectively) with end‐functionalized UPy‐poly(ethylene glycol) (UPy‐PEG) at a ratio of 90:10. Further characterization reveals intimate mixing behavior of UPy‐PCL with UPy‐PEG, but poor mechanical properties, whereas CE‐UPy‐PCL scaffolds are mechanically stable. As a proof‐of‐concept for the use of non‐cell adhesive supramolecular materials in vivo, electrospun vascular scaffolds are applied in an aortic interposition rat model, showing reduced cell infiltration in the presence of only 10% of UPy‐PEG. Together, these results provide the first steps toward advanced supramolecular biomaterials for in situ vascular tissue engineering with control over selective cell capturing.

     

High molecular weight supramolecular polymers containing both terpyridine metal complexes and ureidopyrimidinone quadruple hydrogen-bonding units in the main chain

Using a hydroxy-functionalized terpyridine as initiator, a poly(epsilon-caprolactone) containing one terpyridine endgroup was prepared by tin octanoate-catalyzed controlled ring-opening polymerization. The omega-hydroxy group of this polymer was subsequently reacted with an isocyanato-ureidopyrimidinone, resulting for the first time in polymers bearing a metal-coordinating ligand on the one and a hydrogen-bonding unit on the other chain end. Hydrogen-bonded supramolecular dimers were shown to be present in chloroform solution. The subsequent addition of iron(II) ions resulted in the formation of high molecular weight supramolecular polymers with novel properties resulting from the combination of both types of noncovalent interactions in the main chain, as could be shown using capillary viscosimetry and rheometry.     

Molecular Watchmaking: ab initio Emulsion Polymerization by RAFT-controlled Self-assembly

Controlled radical polymerization using RAFT has the potential to make polymers with virtually any desired molecular architecture. For this to be implemented on an industrial scale, it must be performed by polymerization in disperse media. However, simply adding a RAFT agent to a conventional emulsion polymerization recipe leads to a loss of molecular weight control and formation of coagulum, probably because of nucleation in droplets, which is normally an unlikely phenomenon in emulsion polymerizations. Recently, a method has been devised for implementing RAFT in ab initio emulsion polymerization that avoids droplets in the particle formation stage. The molecular weight distribution of the polymer thus formed shows that molecular weight control is maintained throughout the polymerization. A model is developed to predict the particle size formed in this new type of emulsion polymerization. The new methodology enables synthesis of novel dispersions where molecular architecture can be precisely controlled, such as structured core-shell particles.     

Quantifying Guest–Host Dynamics in Supramolecular Assemblies to Analyze Their Robustness

The most basic function of synthetic microenvironments for tissue engineering is to act as a physical substrate for cell attachment, migration, and proliferation, similar to the natural cell environment. Functionalization of supramolecular materials with guest compounds that display the same recognition moieties is a common strategy to introduce biofunctionality. However, besides a robust interaction with the material, a certain level of dynamics needs to be conserved for an adaptive interface toward the living environment. A balance between robust material functionalization and dynamic cell interaction needs to be met. The detailed analysis hereof using a ureido‐pyrimidinone (UPy) poly(ethylene glycol) system in dilute and transient network regime is demonstrated. Monovalent and bivalent UPy‐functionalized guest molecules are designed and their interaction with UPy‐host fibers is evaluated. Analysis of guest interaction in the dilute state by microfluidics, and in the gel state, by fluorescence recovery after photobleaching and fluorescence resonance energy transfer is proven to be suitable to quantify the local and ensemble guest mobility. The results demonstrate that the interaction of bioactive moieties through supramolecular host–guest chemistry yields a dynamic system, which is stronger for divalent guests but risks unintended leakage in the case of functional monomeric units.     

Ketene acetal monomers: Cationic photopolymerization

A study of the photoinduced cationic polymerization of a novel series of cyclic and acyclic ketene acetal monomers was carried out. It was observed that the cyclic monomers underwent facile cationic polymerization to give high molecular weight polymers while the acyclic ketene acetals did not. Thermally induced polymerization was also observed on standing catalyzed by glass surfaces. Photoinduced cationic polymerizations employing both diaryliodonium and triarylsulfonium salt photoinitiators were studied. It was observed that the position and type of substitutents in the cyclic ketene acetals was the major factor in determining the proportion of vinyl and ring-opening polymerizations that take place. © 1996 John Wiley & Sons, Inc.     

Towards photoswitchable quadruple hydrogen bonds via a reversible “photolocking” strategy for photocontrolled self-assembly

Developing new photoswitchable noncovalent interaction motifs with controllable bonding affinity is crucial for the construction of photoresponsive supramolecular systems and materials. Here we describe a unique “photolocking” strategy for realizing photoswitchable control of quadruple hydrogen-bonding interactions on the basis of modifying the ureidopyrimidinone (UPy) module with an ortho-ester substituted azobenzene unit as the “photo-lock”. Upon light irradiation, the obtained Azo-UPy motif is capable of unlocking/locking the partial H-bonding sites of the UPy unit, leading to photoswitching between homo- and heteroquadruple hydrogen-bonded dimers, which has been further applied for the fabrication of novel tunable hydrogen bonded supramolecular systems. This “photolocking” strategy appears to be broadly applicable in the rational design and construction of other H-bonding motifs with sufficiently photoswitchable noncovalent interactions.

A photolocking strategy is described to achieve the construction of effectively photoswitchable quadruple hydrogen bonds featuring with photoregulable H-bonding affinities, which is further applied in the photocontrollable H-bonded self-assemblies.     

New light on the ring-chain equilibrium of a hydrogen-bonded supramolecular polymer based on a photochromic dithienylethene unit and its energy-transfer properties as a storage material

A novel, bifunctional, quadruple hydrogen-bonding ureido-pyrimidinone (UPy) unit bridged by photochromic dithienylethene (1) has been synthesized, which affords linear assemblies in solution and undergoes concentration-dependent ring-opening polymerization. The two UPy functional groups of 1 can dimerize intramolecularly to form a cyclic monomer with the two thienyl rings fixed in a parallel conformation, which prohibits its photocyclization. We exploited the photochemical reactivity and resonance difference of the linker of the bis-UPy derivative as well as using the more typical (1)H NMR, DOSY, and Ubbelohde viscometry methods to investigate for the first time the ring-chain polymerization mechanism. Moreover, we fabricated a mixed polymer film with a fluorescent dye noncovalently endcapping the linear photochromic assemblies through quadruple hydrogen bonds, which showed nondestructive fluorescent read-out ability for data storage by fluorescence resonance energy transfer (FRET) from the fluorescent dye to the closed form of the diarylethene.     

Synthesis of block copolymer containing dextran and polyamide sequences

A novel AB-type block copolymer composed of dextran and polyamide sequences was prepared through the following two approaches. One is a coupling reaction of a terminal functional group introduced in the dextran chain with that in the polyamide chain, such as the reaction of an amine group with an acyllactam group or that of a lactone group with an amine group at the corresponding chain ends. The other is an anionic polymerization of a bicyclic lactam activated with a trimethylsilylated dextran derivative having an acyllactam end group. The latter procedure was found to be more effective for the preparation of the block copolymer having a high molecular weight polyamide sequence.     

Synthesis of hyperbranched carbohydrate polymers by ring-opening multibranching polymerization of anhydro sugar

The synthesis of novel hyperbranched carbohydrate polymers, prepared by the ring-opening multibranching polymerizations of anhydro and dianhydro sugars, is described. The hyperbranched carbohydrate polymers were formed by the cationic polymerization of 1,6-anhydro-beta-D-hexopyranose, 1,4-anhydrotetritol, 2,3-anhydrotetritol, and 1,2:5,6-dianhydro-D-mannitol. These polymerizations proceeded without gelation to produce water-soluble hyperbranched carbohydrate polymers with controlled molecular weights and narrow polydispersities. The values for the degree of branching of the polymers were in the range of 0.28-0.50. The polymerization method, which proceeds through a ring-opening reaction by a proton-transfer reaction mechanism, is a facile method leading to a spherical carbohydrate polymer with a high degree of branching.     

Orthogonal chain length control in calix[5]arene-based AB-type supramolecular polymers

New AB-type supramolecular polymers have been prepared by acid-promoted self-assembly of an aminododecyloxy-calix[5]arene monomer precursor. The number-average degree of polymerization has been found to be dependent on the concentration of the salt monomer and on the nature of the counterion (i.e., chloride, picrate or hexafluorophosphate).Chain-length regulation experiments have been carried out, employing orthogonal chain stoppers capable of selectively interacting with a given moiety of the AB-type monomer/polymer. Competitive calix[5]arene ‘caps’ and n-butylammonium ion ‘plugs’ have been used to control the extent of self-assembly of the polymer, in turn interacting with the ammoniumdodecyloxy or with the cavity end-groups of the supramolecular calixarene assembly. These experiments, conveniently carried out at a 10 mM concentration, can be easily followed by ¹H NMR spectroscopy.     

Consequences of Block Sequence on the Orthogonal Folding of Triblock Copolymers

ABA‐ and BAB‐type triblock copolymers possessing pendant, self‐assembling motifs in the A and B blocks were synthesized, with 2‐ureidopyrimidinone (UPy) and benzene‐1,3,5‐tricarboxamide (BTA) for the A and B block, respectively. They were investigated to assess if and how the polymer’s microstructure influences the self‐assembly behavior of the supramolecular motifs and, as a result, the single‐chain folding process. BAB‐type triblock copolymers were synthesized via atom transfer radical polymerization (ATRP) with molecular weights ranging from 30 to 120 kg mol^?1; the BTA and UPy motifs were attached using a post‐functionalization approach. The ABA‐type triblock copolymers were available from previous work. In highly dilute solutions, both types of triblock copolymers fold into single‐chain polymeric nanoparticles (SCPNs) via thermally induced BTA self‐assembly and photo‐triggered UPy dimerization. Chain collapse induced by intramolecular UPy dimerization was evaluated using size‐exclusion chromatography (SEC). The BTA self‐assembly was monitored by circular dichroism (CD) spectroscopy. The microstructures of SCPNs were visualized by atomic force microscopy (AFM). SEC analysis indicated a more loose packing for the BAB‐type folded nanoparticles than for the ABA‐type ones, which implies that topological differences in the polymer architecture do affect the folding behavior, although only slightly. The facile synthetic protocol developed here provides topologically different triblock architectures and opens up the area for single‐chain folding technology that is applicable in artificial enzymatic systems with compartmentalized domains.     

Formation of A2B2 supramolecular porphyrin co-polymers

New supramolecular A2B2 co-polymers formed in solution from a rigid diporphyrin monomer (the A2 unit) and a short flexible dipyridine monomer (the B2 unit) are reported; NMR experiments show that complete binding occurs at mM concentrations; UV titrations reveal that the dipyridine unit and a monomeric control ligand have identical binding constants, confirming that linear polymers were generated (in preference to small cyclic oligomers); at 2 x 10(-2) M polymers with an average molecular weight of 17,100 g mol-1 and containing approximately 14 porphyrin units have formed.     

Light-fueled dissipative self-assembly at molecular and macro-scale enabled by a visible-light-responsive transient hetero-complementary quadruple hydrogen bond

The development of out-of-equilibrium self-assembly systems using light as input fuel is highly desirable and promising for the fabrication of smart supramolecular materials. Herein, we report the construction of new artificial light-fueled dissipative molecular and macroscopic self-assembly systems based on a visible-light-responsive transient quadruple H-bonding array, which consists of an azobenzene-modified ureidopyrimidinone (UPy) module (Azo-O-UPy) and a nonphotoactive diamidonaphthyridine (DAN) derived competitive binder (Napy-1). The visible light (410 nm) irradiation can induce the E to Z isomerization of the azobenzene unit of E-Azo-O-UPy to produce Z-Azo-O-UPy with an opened UPy binding site, which can complex with Napy-1 to form a quadruply H-bonded heterodimer. The heterodimer is metastable and can be quickly disassembled in dark, owing to the fast thermal relaxation of Z-Azo-O-UPy to E-Azo-O-UPy. While introducing such transient quadruple H-bonding interaction into a linear polymer system or a polymeric gel system, light-fueled out-of-equilibrium polymeric assembly both at molecular and macro-scale can be achieved.     

Ultra-fast microwave enhanced reversible addition-fragmentation chain transfer (RAFT) polymerization: monomers to polymers in minutes

Microwave mediated RAFT polymerization leads to ultra-fast polymerizations, whilst keeping excellent control over molecular weights and molecular weight distributions; this is the first example of such a dramatic effect of microwaves on living radical polymerization kinetics, and it shows the potential for chemists to produce very well controlled polymers in a matter of minutes.