Ionic-liquid-promoted decaborane dehydrogenative alkyne-insertion reactions: a new route to o-carboranes

Unlike in conventional organic solvents, where Lewis base catalysts are required, decaborane dehydrogenative alkyne-insertion reactions proceed rapidly in biphasic ionic-liquid/toluene mixtures with a wide variety of terminal and internal alkynes, thus providing efficient, one-step routes to functional o-carborane 1-R-1,2-C2B10H11 and 1-R-2-R'-1,2-C2B10H10 derivatives, including R = C6H5- (1), C6H13- (2), HC[triple bond]C-(CH2)5- (3), (1-C2B10H11)-(CH2)5- (4), CH3CH2C(O)OCH2- (5), (C2H5)2NCH2- (6), NC-(CH2)3- (7), 3-HC[triple bond]C-C6H4- (8), (1-C2B10H11)-1,3-C6H4- (9), HC[triple bond]C-CH2-O-CH2- (10); R,R' = C2H5- (11); R = HOCH2-, R' = CH3- (12); R = BrCH2-; R' = CH3- (13); R = H2C=C(CH3)-, R' = C2H5- (14). The best results were obtained from reactions with only catalytic amounts of bmimCl (1-butyl-3-methylimidazolium chloride), where in many cases reaction times of less than 20 min were required. The experimental data for these reactions, the results observed for the reactions of B10H13(-) salts with alkynes, and the computational studies reported in the third paper in this series all support a reaction sequence involving (1) the initial ionic liquid promoted formation of the B10H13(-) anion, (2) addition of B10H13(-) to the alkyne to form an arachno-R,R'-C2B10H13(-) anion, and (3) protonation of arachno-R,R'-C2B10H13(-) to form the final neutral 1-R-2-R'-1,2-C2B10H10 product with loss of hydrogen.     

Transition-metal-promoted reactions of boron hydrides. 17. Titanium-catalyzed decaborane-olefin hydroborations.

The titanium-catalyzed hydroboration reactions of decaborane with a variety of terminal olefins have been found to result in the exclusive, high-yield formation of monosubstituted decaborane 6-R-B(10)H(13) products, arising from anti-Markovnikov addition of the cage B6-H to the olefin. The titanium-catalyzed reactions are slow, often less than one turnover per hour; however, their high selectivities and yields coupled with the fact that they are simple, one-pot reactions give them significant advantages over the previously reported routes to 6-R-B(10)H(13) compounds. The catalyst also has extended activity with reactions carried out for as long as 13 days, showing little decrease in reactivity, thereby allowing for the production of large amounts of 6-R-B(10)H(13). The titanium-catalyzed reactions of decaborane with the nonconjugated diolefins, 1,5-hexadiene and diallylsilane, were found to give, depending upon reaction conditions and stoichiometries, high yields of either alkenyl-substituted 6-(CH(2)=CH(CH(2))(4))-B(10)H(13) (4) and 6-(CH(2)=CHCH(2)SiMe(2)(CH(2))(3))-B(10)H(13) (5) or linked-cage 6,6'-(CH(2))(6)-(B(10)H(13))(2) (6) and Me(2)Si(6-(CH(2))(3)-B(10)H(13))(2) (7) compounds, respectively. The unique tetra-cage product, Si(6-(CH(2))(3)-B(10)H(13))(4) (8), was obtained by the catalyzed reaction of 4 equiv of decaborane with tetraallylsilane. Sequential use of the titanium catalyst and previously reported platinum catalysts (PtBr(2) or H(2)PtCl(6).6H(2)O with an initiator) provides an efficient pathway to asymmetrically substituted 6-R-9-R'-B(10)H(12) species. The structures of compounds 5, 6, and 8, as well as a platinum derivative, (PSH(+))(2)-commo-Pt-[nido-7-Pt-8-(n-C(8)H(17))B(10)H(11)](2)(2-), of 6-(n-octyl)decaborane have been established by single-crystal crystallographic determinations.     

Computational studies of the reactions of B10H13- with alkynes and olefins: pathways for dehydrogenative alkyne-insertion and olefin-hydroboration reactions

Quantum mechanical computational studies of possible mechanistic pathways for B10H13(-) dehydrogenative alkyne-insertion and olefin-hydroboration reactions demonstrate that, depending on the reactant and reaction conditions, B10H13(-) can function as either an electrophile or nucleophile. For reactions with nucleophilic alkynes, such as propyne, the calculations indicate that at the temperatures (approximately 110-120 degrees C) required for these reactions, the ground-state B10H13(-) (1) structure can rearrange to an electrophilic-type cage structure 3 having a LUMO orbital strongly localized on the B6 cage-boron. Alkyne binding at this site followed by subsequent steps involving the formation of additional boron-carbon bonds, hydrogen elimination, protonation, and further hydrogen elimination then lead in a straightforward manner to the experimentally observed ortho-carborane products resulting from alkyne insertion into the decaborane framework. A similar mechanistic sequence was identified for the reaction of propyne with 6-R-B10H12(-) leading to the formation of 1-Me-3-R-1,2-C2B10H11 carboranes. On the other hand, both B10H13(-) and 4,6-C2B7H12(-) have previously been shown to react at much lower temperatures with strongly polarized alkynes, and the DFT and IRC calculations support an alternative mechanism involving initial nucleophilic attack by these polyborane anions at the positive terminal acetylenic carbon to produce terminally substituted olefinic anions. In the case of the B10H13(-) reaction, subsequent cyclization steps were identified that provide a pathway to the experimentally observed arachno-8-(NC)-7,8-C2B10H14(-) carborane. The computational study of B10H13(-) propylene hydroboration also supports a mechanistic pathway involving a cage rearrangement to the electrophilic 3 structure. Olefin-binding at the LUMO orbital localized on the B6 cage-boron, followed by addition of the B6-H group across the olefinic double bond and protonation, then leads to the experimentally observed 6-R-B10H13 products.     

Synthesis of carbaalane halogen derivatives

The carbaalane halogen derivatives [(AlX)(6)(AlNMe(3))(2)(CCH(2)CH(2)SiMe(3))(6)] (X = F (9), Cl (7), Br (10), I (11)) were prepared in toluene from [(AlH)(6)(AlNMe(3))(2)(CCH(2)CH(2)SiMe(3))(6)] (6) and BF(3).OEt(2), BX(3) (X = Br, I), Me(3)SnF, and Me(3)SiX (X = Cl, Br, I), respectively. A partially halogenated product [(AlH)(2)(AlX)(4)(AlNMe(3))(2)(CCH(2)CH(2)SiMe(3))(6)] (12) (X = Cl (approximately 40%), Br (approximately 60%)) was obtained from 5 and impure BBr(3). [(AlH)(6)(AlNMe(3))(2)(CCH(2)Ph)(6)] (5) was converted to [(AlX)(6)(AlNMe(3))(2)(CCH(2)Ph)(6)] (X = F (13), Cl (14), Br (15), I (16)) using BF(3).OEt(2) and Me(3)SiX (X = Cl, Br, I), respectively. The X-ray single-crystal structures of 11.C(6)H(6), 12.3C(7)H(8), 13.6C(7)H(8), and 15.4C(7)H(8) were determined. Compounds 7 and 9-11 are soluble in benzene/toluene and could be well characterized by NMR spectroscopy and MS (EI) spectrometry. The results demonstrate the facile substitution of the hydridic hydrogen atoms in 5 and 6 by the halides with different reagents.     

Synthesis and Chemical Constitution of Diphenoxyphosphoryl Derivatives and Phosphonium Salts as Coupling Reagents for Peptide Segment Condensation

The reactions of diphenoxyphosphoryl chloride ((PhO) 2 P(O)Cl) and different chlorophosphonium salts ([R 3 PCl]X, R = (CH 3 ) 2 N, pyrrolidine, X = PF 6 m , BF 4 m ), respectively, with 7-aza-1-hydroxybenzotriazole (HOAt), 1-hydroxybenzotriazole (HOBt), hydroximinomalonitrile (HOxDCO), and ethyl hydroximinocyanoacetate (HOxO) are described. The structures of the new compounds, which are useful coupling reagents for epimerization-free peptide segment condensation, are discussed on the basis of their 1 H, 13 C, 31 P NMR, and IR spectra. The reactions of (PhO) 2 P(O)Cl lead to mixtures of O - and N -phosphorylated isomers of varying ratios. Contrary, reactions of chlorophosphonium salts yield exclusively one isomer.     

Crystallographic characterizations and new high-yield synthetic routes for the complete series of 6-X-B10H13 halodecaboranes (X = F, Cl, Br, I) via superacid-induced cage-opening reactions of closo-B10H10(2-)

The high-yield syntheses of 6-X-B 10H 13 [X = Cl (88%), Br (96%), I (84%)] resulted from the cage-opening reactions of the (NH 4 (+)) 2B 10H 10 (2-) salt with ionic-liquid-based superacidic hydrogen halides, while both the previously unknown 6-F-B 10H 13 (77%) derivative and 6-Cl-B 10H 13 (90%) were synthesized in high yields via the reactions of (NH 4 (+)) 2B 10H 10 (2-) with triflic acid in the presence of 1-fluoropentane and dichloromethane, respectively. Structural characterizations of 1- 4 confirm the predicted structures and indicate strong halogen back-bonding interactions with the B6 boron. The reaction of 6-Br-B 10H 13 with Bu 3SnH produced the parent B 10H 14 in 70% yield, and thus, this reaction, in conjunction with the haloacid-induced closo-B 10H 10 (2-) cage-opening reactions, has the potential to provide an alternative to the traditional diborane pyrolysis route to decaborane.     

Synthesis and reactivity of 4,5-[1,2-dicarba-closo-dodecaborano(12)]-1,3-diselenacyclopentane: opening of the icosahedron to give a zwitterionic intermediate and conversion into 7,8-dicarba-nido-undecaborate(1-)

The reaction of the 1,2-diselenolato-1,2-dicarba-closo-dodecaborane(12) dianion [1,2-(1,2-C(2)B(10)H(10))Se(2)](2-) with dichloromethane (CH(2)Cl(2) or CD(2)Cl(2)) in the presence of donor solvents gave 4,5-[1,2-dicarba-closo-dodecaborano(12)]-1,3-diselenacyclopentane, the title compound, which was characterized by X-ray structural analysis and NMR spectroscopy ((1)H, (11)B, (13)C, and (77)Se). In the presence of pyridine, opening of the icosahedron took place, and a zwitterionic intermediate was isolated and fully characterized in the solid state by X-ray diffraction and in solution by multinuclear magnetic resonance techniques. Although such types of intermediates, prior to deboronation of the ortho-carborane cage, have been proposed several times, this is first example for which the structure has been confirmed unambiguously. This intermediate possesses a nido structure and contains a 7,8-dicarba-nido-undecaborate(1-) anion and a boronium cation, the latter with two pyridine rings linked to the boron atom, which has been extruded from the cage. It was shown that this process is reversible as long as the deboronation is not complete. The formation of the intermediate is accompanied by deboronation, which leads to the 7,8-dicarba-nido-undecaborate(1-) anion. The latter was prepared independently by conventional routes from the title compound, isolated as crystalline material as the tetrabutyl ammonium salt, and characterized by X-ray structural analysis and multinuclear magnetic resonance spectroscopy ((1)H, (11)B, (13)C, and (77)Se).     

Mononuclear and dinuclear palladium and nickel complexes of phosphinimine-based tridentate ligands

The tridentate bis-phosphinimine ligands O(1,2-C(6)H(4)N=PPh(3))(2)1, HN(1,2-C(2)H(4)N=PR(3))(2) (R = Ph 2, iPr 3), MeN(1,2-C(2)H(4)N=PPh(3))(2)4 and HN(1,2-C(6)H(4)N=PPh(3))(2)5 were prepared. Employing these ligands, monometallic Pd and Ni complexes O(1,2-C(6)H(4)N=PPh(3))(2)PdCl(2)6, RN(1,2-CH(2)CH(2)N=PPh(3))(2)PdCl][Cl] (R = H 7, Me 8), [HN(1,2-CH(2)CH(2)N=PiPr(3))(2)PdCl][Cl] 9, [MeN(1,2-CH(2)CH(2)N=PPh(3))(2)PdCl][PF(6)] 10, [HN(1,2-CH(2)CH(2)N=PPh(3))(2)NiCl(2)] 11, [HN(1,2-CH(2)CH(2)N=PR(3))(2)NiCl][X] (X = Cl, R = iPr 12, X = PF(6), R = Ph 13, iPr 14), and [HN(1,2-C(6)H(4)N=PPh(3))(2)Ni(MeCN)(2)][BF(4)]Cl 15 were prepared and characterized. While the ether-bis-phosphinimine ligand 1 acts in a bidentate fashion to Pd, the amine-bis-phosphinimine ligands 2-5 act in a tridentate fashion, yielding monometallic complexes of varying geometries. In contrast, initial reaction of the amine-bis-phosphinimine ligands with base followed by treatment with NiCl(2)(DME), afforded the amide-bridged bimetallic complexes N(1,2-CH(2)CH(2)N=PR(3))(2)Ni(2)Cl(3) (R = Ph 16, iPr 17) and N(1,2-C(6)H(4)N=PPh(3))(2)Ni(2)Cl(3)18. The precise nature of a number of these complexes were crystallographically characterized.     

离子液体介质中钌纳米粒子催化苯乙酮及其衍生物的不对称加氢反应

采用水溶性三(间-磺酸钠苯基)膦(TPPTS)作稳定剂, 在离子液体1-丁基-3-甲基-咪唑四氟硼酸盐([BMIM]BF4)或1-丁基-3-甲基-咪唑对甲基苯磺酸盐([BMIM][p-CH3C6H4SO3])介质中用氢气还原RuCl3·3H2O, 得到钌纳米粒子. 将此钌纳米粒子与(1S, 2S)-1,2-二苯基乙二胺(简称(1S, 2S)-DPEN)、KOH在离子液体/异丙醇介质中原位生成一种不对称加氢催化剂, 用于催化苯乙酮及其衍生物的不对称加氢反应. 实验结果表明, 离子液体介质中的纳米钌催化剂体系具有良好的催化活性和对映选择性. 在优化反应条件下, 催化苯乙酮获得了100%的转化率和79.1%的对映选择性. 并且产物经正己烷萃取后, 含有钌纳米粒子的离子液体可以循环使用.     

Reactions of arachno-6,8-C2B7H12- with electron deficient olefins: syntheses of cyano-substituted carboranes

The syntheses of new cyano-substituted derivatives of arachno-6,8-C(2)B(7)H(13) have been achieved through the addition reactions of the arachno-6,8-C(2)B(7)H(12)(-) (1-) anion with cyano-activated olefins. The reaction of PSH+1- with tetracyanoethylene (TCNE) yielded the unusual bridging compound PSH(+)endo-6-endo-7-[micro(2)-(C(CN)(2))(2)]-arachno-6,8-C(2)B(7)H(12)(-) (PSH+2-)) resulting from cycloaddition of the TCNE at the C6-B7 edge of the anion. Consistent with its hypho skeletal electron count, an X-ray crystallographic study and DFT/GIAO calculations confirm 2(-) has a more open structure than 1-. The reaction of 1- with acrylonitrile resulted in the formation of endo-6-(NCCH(2)CH(2))-arachno-6,8-C(2)B(7)H(11)(-) (3-), which, upon acidification, afforded endo-6-(NCCH(2)CH(2))-arachno-6,8-C(2)B(7)H(12) (3) in high yield. X-ray crystallographic and DFT/GIAO studies established that the cyanoethyl fragment in 3 is substituted at the endo-position of the C6 cage-carbon. Heating 3 in THF at 50 degrees C or in toluene at 110 degrees C resulted in the quantitative isomerization of the cyanoethyl-substituent from the endo- to the exo-position at C6 to yield exo-6-(NCCH(2)CH(2))-arachno-6,8-C(2)B(7)H(12) (4). This is the first example of an endo to exo isomerization to be observed at a cage-carbon of a carborane. While heating 3 resulted in isomerization to 4, heating 3- in the presence of a small amount of 3 yielded the new ethylene-bridged 10-vertex tricarbaborane micro(6,9)-(CH(2)CH(2))-arachno-5,6,9-C(3)B(7)H(11) (5) resulting from reduction of the 3- pendant nitrile group, followed by deammination and carbon insertion.     

The C-H and alpha(C-X) bond dissociation enthalpies of toluene, C6H5-CH2X (X = F, Cl), and their substituted derivatives: a DFT study

The homolytic C-H bond dissociation enthalpies (BDEs) of toluene and its para- and meta-substituted derivatives have been estimated by using the (RO)B3LYP/6-311++G(2df,2p)//(U)B3LYP/6-311G(d,p) procedure. The performance of two other hybrid functionals of DFT, namely, B3PWP91 and O3LYP, has also been evaluated using the same basis sets and molecules. Our computed results are compared with the available experimental values and are found to be in good agreement. The (RO)B3LYP and (RO)O3LYP procedures are found to produce reliable BDEs for the C-H bonds in toluene and the C-X (X = F, Cl) bond in alpha-substituted toluene (C6H5-CH2X) and their substituted derivatives. The substituent effect on the BDE values has been analyzed in terms of the ground-state effect and the radical effect. The effect of polarization of the C-H bond on the substituent effect is also analyzed. The BDE(C-H) and BDE(C-X) values for alpha-substituted (X = F and Cl) toluenes with a set of para substituents are presented for the first time.     

Environmental control of solution speciation in cobalt(II) 2,2':6',2'-terpyridine complexes: anion and solvent dependence

In methanol or chloroform/methanol solutions, reactions of Cltpy or MeOtpy (Rtpy = 4'-R-2,2':6',2'-terpyridine) with CoX(2)·xH(2)O (X(-) = Cl(-), [OAc](-), [NO(3)](-) or [BF(4)](-)) result in the formation of equilibrium mixtures of [Co(Rtpy)(2)](2+) and [Co(Rtpy)X(2)]. A study of the solution speciation has been carried out using (1)H NMR spectroscopy, aided by the dispersion of signals in the paramagnetically shifted spectra; on going from a low- to high-spin cobalt(II) complex, proton H(6) of the tpy ligand undergoes a significant shift to higher frequency. For R = Cl and X(-) = [OAc](-), increasing the amount of CD(3)OD in the CD(3)OD/CDCl(3) solvent mixture affects both the relative proportions of [Co(Cltpy)(2)](2+) and [Co(Cltpy)(OAc)(2)] and the chemical shifts of the (1)H NMR resonances arising from [Co(Cltpy)(OAc)(2)]. When the solvent is essentially CDCl(3), the favoured species is [Co(Cltpy)(OAc)(2)]. For the 4'-methoxy-2,2':6',2'-terpyridine, the speciation of mono- and bis(terpyridine)cobalt(II) complexes depends upon the anion, solvent and ligand:Co(2+) ion ratio. The (1)H NMR spectrum of [Co(MeOtpy)(2)](2+) is virtually independent of anion and solvent. In contrast, the signals arising from [Co(MeOtpy)X(2)] depend on the anion and solvent. In the case of X(-) = [BF(4)](-), we propose that the mono(tpy) complex formed in solution is [Co(MeOtpy)L(n)](2+) (L = H(2)O or solvent, n = 1-3). The formation of mono(tpy) species has been confirmed by the solid state structures of [Co(Cltpy)(OAc-O)(OAc-O,O')], [Co(MeOtpy)(OAc-O)(OAc-O,O')], [Co(MeOtpy)(NO(3)-O)(2)(OH(2))] and [Co(MeOtpy)Cl(2)]. The single crystal structure of the cobalt(III) complex [Co(Cltpy)Cl(3)]·CHCl(3) is also reported.     

Mechanistic insights into the gold-catalyzed cycloisomerization of bromoallenyl ketones: ligand-controlled regioselectivity

Through computational and experimental studies, the mechanisms of gold-catalyzed cycloisomerization of bromoallenyl ketones in toluene have been elucidated. The divergent 1,2-migrations for the Au(I)- and Au(III)-catalyzed reactions have been investigated, and the results confirmed that the regiochemistry is ligand-dependent in cases of Au(PR3)L (L = Cl, OTf, BF4, and SbF6) catalysts.     

New palladium-catalyzed cross-coupling routes to carbon functionalized metallatricarbadecaboranes

A general method for the synthesis of cage-carbon-functionalized cyclopentadienyl iron and cyclopentadienyl ruthenium tricarbadecaboranyl complexes has been developed that employs palladium-catalyzed Sonogashira, Heck, and Stille cross-coupling reactions directed at a cage-carbon haloaryl substituent. The key Li(+)[6-(p-XC(6)H(4))-nido-5,6,9-C(3)B(7)H(9)(-)] (X = I (1), Br (2), Cl (3)) haloaryl-tricarbadecaboranyl anionic ligands were synthesized in high yields via the reaction of the arachno-4,6-C(2)B(7)H(12)(-) anion with the corresponding p-halobenzonitriles (p-XC(6)H(4)-CN). The reactions of the salts 1-3 with (η(5)-C(5)H(5))Fe(CO)(2)I and (η(5)-C(5)H(5))Ru(CH(3)CN)(3)PF(6) were then used to produce the haloaryl complexes 1-(η(5)-C(5)H(5))-2-(p-XC(6)H(4))-closo-1,2,3,4-MC(3)B(7)H(9) (M = Fe, X = I (4), Br (5), Cl (6) and M = Ru, X = I (7), Br (8), Cl (9)). The sonication-promoted Sonogashira coupling reactions of 4 with terminal alkynes catalyzed by Pd(dppf)(2)Cl(2)/CuI yielded the alkynyl-linked derivatives 1-(η(5)-C(5)H(5))-2-p-RC(6)H(4)-closo-1,2,3,4-FeC(3)B(7)H(9) (R = (PhC≡C)- (10), (CH(3)CH(2)C(O)OCH(2)C≡C)- (11), ((η(5)-C(5)H(5))Fe(η(5)-C(5)H(4)C≡C))- (12)). Heck reactions of 4 with terminal alkenes catalyzed by Pd(OAc)(2) yielded the alkene-functionalized products 1-(η(5)-C(5)H(5))-2-p-RC(6)H(4)-closo-1,2,3,4-FeC(3)B(7)H(9) (R = (PhCH(2)CH═CH)- (13), (CH(3)(CH(2))(2)CH═CH)- (14)), while the Stille cross-coupling reactions of 4 with organotin compounds catalyzed by Pd(PPh(3))(2)Cl(2) afforded the complexes 1-(η(5)-C(5)H(5))-2-p-RC(6)H(4)-closo-1,2,3,4-FeC(3)B(7)H(9) (R = Ph- (15), (CH(2)═CH)- (16), (CH(2)═CHCH(2))- (17)). These reactions thus provide facile and systematic access to a wide variety of new types of functionalized metallatricarbadecaboranyl complexes with substituents needed for potential metallocene-like biomedical and/or optoelectronic applications.     

Synthesis, structure, and reactivity of 13-vertex carboranes and 14-vertex metallacarboranes

Syntheses, properties, and synthetic applications of 13-vertex closo- and nido-carboranes are reported. Reactions of the nido-carborane salt [(CH2)3C2B10H10]Na2 with dihaloborane reagents afforded 13-vertex closo-carboranes 1,2-(CH2)3-3-R-1,2-C2B11H10 (R = H (2), Ph (3), Z-EtCH=C(Et) (4), E-(t)BuCH=CH (5)). Treatment of the arachno-carborane salt [(CH2)3C2B10H10]Li4 with HBBr2.SMe2 gave both the 13-vertex carborane 2 and a 14-vertex closo-carborane (CH2)3C2B12H12 (8). On the other hand, the reaction of [C6H4(CH2)2C2B10H10]Li4 with HBBr2.SMe2 generated only a 13-vertex closo-carborane 1,2-C6H4(CH2)2-1,2-C2B11H11 (9). Electrophilic substitution reactions of 2 with excess MeI, Br2, or I2 in the presence of a catalytic amount of AlCl3 produced the hexa-substituted 13-vertex carboranes 8,9,10,11,12,13-X6-1,2-(CH2)3-1,2-C2B11H5 (X = Me (10), Br (11), I (12)). The halogenated products 11 and 12 displayed unexpected instability toward moisture. The 13-vertex closo-carboranes were readily reduced by groups 1 and 2 metals. Accordingly, several 13-vertex nido-carborane dianionic salts [nido-1,2-(CH2)3-1,2-C2B11H11][Li2(DME)2(THF)2] (13), [[nido-1,2-(CH2)3-1,2-C2B11H11][Na2(THF)4]]n (13a), [[nido-1,2-(CH2)3-3-Ph-1,2-C2B11H10][Na2(THF)4]]n (14), [[nido-1,2-C6H4(CH2)2-1,2-C2B11H11][Na2(THF)4]]n (15), and [nido-1,2-(CH2)3-1,2-C2B11H11][M(THF)5] (M = Mg (16), Ca (17)) were prepared in good yields. These carbon-atom-adjacent nido-carboranes were not further reduced to the corresponding arachno species by lithium metal. On the other hand, like other nido-carborane dianions, they were useful synthons for the production of super-carboranes and supra-icosahedral metallacarboranes. Interactions of 13a with HBBr2.SMe2, (dppe)NiCl2, and (dppen)NiCl2 gave the 14-vertex carborane 8 and nickelacarboranes [eta5-(CH2)3C2B11H11]Ni(dppe) (18) and [eta5-(CH2)3C2B11H11]Ni(dppen) (19), respectively. All complexes were fully characterized by various spectroscopic techniques and elemental analyses. Some were further confirmed by single-crystal X-ray diffraction studies.     

Synthesis and characterization of boranate ionic liquids (BILs)

Straightforward access to hydridoborate-based ionic liquids (BILs) is provided. They fall into a barely developed area of research and are of interest as, for example, reagents for organic synthesis. A series of pure [BH(4)](-) ILs with 1-butyl-2,3-dimethylimidazolium (BMMIM), 1-ethyl-3-methylimidazolium (EMMIM), 1-propyl-1-methylpiperidinium (PropMPip), and1-butyl-1-methylpyrrolidinium (BMP) cations were prepared. All synthesized ILs are well soluble in CH(2)Cl(2). We developed a procedure that gives clean products with correct elemental analyses. In contrast to earlier reports, which when conducted by us yielded only mixtures of the boranate anion with major halide contamination (maximum [BH(4)](-) content: 77.5?%). These materials can be viewed as the starting material for the (hypothetical) hydrogen-storage redox shuttling sequence between [BH(4)](-) and [B(12)H(12)](2-), in which the triboranate anion [B(3)H(8)](-) is a formal intermediate. Here we also developed a facile route to [B(3)H(8)](-) ILs with [BMMIM](+), [EMMIM](+), [PropMPip](+), and [NBu(4)](+), in which Na[BH(4)] reacts in situ (enhanced by ultrasound) with the solvent CH(2)Cl(2) as the oxidizing agent to give the triboranate IL in high yield and purity according to the equation: 3?[BH(4)](-)+2?CH(2)Cl(2)+[Cat](+)→[B(3)H(8)](-)[Cat](+)+H(2)+2?CH(3)Cl+2?Cl(-). We further investigated this reaction path by additional NMR spectroscopic experiments, powder-XRD analysis, and quantum chemical DFT calculations.     

Synthesis and structural characterization of mono- and bisfunctional o-carboranes

Functionalized o-carboranes are interesting ligands for transition metals. Reaction of LiC2B10H11 with Me2NCH2CH2Cl in toluene afforded 1-Me2NCH2CH2-1,2-C2B10H11 (1). Treatment of 1 with 1 equiv. of n-BuLi gave [(Me2NCH2CH2)C2B10H10]Li ([1]Li), which was a very useful synthon for the production of bisfunctional o-carboranes. Reaction of [1]Li with RCH2CH2Cl afforded 1-Me2NCH2CH2-2-RCH2CH2-1,2-C2B10H10 (R = Me2N (2), MeO (3)). 1 and 2 were also prepared from the reaction of Li2C2B10H10 with excess Me2NCH2CH2Cl. Treatment of [1]Li with excess MeI or allyl bromide gave the ionic salts, [1-Me3NCH2CH2-2-Me-1,2-C2B10H10][I] (4) and [1-Me2N(CH2=CHCH2)CH2CH2-2-(CH2=CHCH2)-1,2-C2B10H10][Br] (6), respectively. Interaction of [1]Li with 1 equiv. of allyl bromide afforded 1-Me2NCH2CH2-2-(CH2=CHCH2)-1,2-C2B10H10 (5). Treatment of [1]Li with excess dimethylfulvene afforded 1-Me2NCH2CH2-2-C5H5CMe2-1,2-C2B10H10 (7). Interaction of [1]Li with excess ethylene oxide afforded an unexpected product 1-HOCH2CH2-2-(CH2=CH)-1,2-C2B10H10 (8). 1 and 3 were conveniently converted into the corresponding deborated compounds, 7-Me2NHCH2CH2-7,8-C2B9H11 (9) and 7-Me2NHCH2CH2-8-MeOCH2CH2-7,8-C2B9H10 (10), respectively, in MeOH-MeOK solution. All of these compounds were characterized by various spectroscopic techniques and elemental analyses. The solid-state structures of 4 and 6-10 were confirmed by single-crystal X-ray analyses.     

Half-pseudoferrocene cations from nucleophilic addition of o-carboranyl anions to the [(η6-mesitylene)2Fe](2+) dication

Reactions between the mesitylene (mes) dication [(η(6)-mes)(2)Fe](2+) (1a) [(PF(6)(-))(2) salt] and lithium o-carboranes Li[1-R-1,2-C(2)B(10)H(11)] (2) (R = H, 2a; Me, 2b; Ph, 2c) at low temperature (-60 °C, 1 h, followed by stirring for 2 h at r.t.) in THF resulted in a clean addition of the corresponding carborane anions to one of the unsubstituted arene sites in 1a, forming a series of orange monocations of general structure [(η(5)-mes-exo-6-{2-R-1,2-C(2)B(10)H(11)})Fe(η(6)-mes)](+) (3) (R = H, 3a; Me, 3b; Ph, 3c) which were isolated as PF(6)(-) salts (3PF(6)) in yields ranging 50-75%. Individual complexes were obtained on purification by LC or preparative TLC on a silica gel substrate, using MeCN-CH(2)Cl(2) mixtures as the mobile phase. Interestingly, the room-temperature reaction between 2a (threefold excess) and 1a(PF(6))(2) with a reverse order of addition of the reaction components yielded an orange salt [(η(5)-mes-exo-6-{1,2-C(2)B(10)H(11)})Fe(η(6)-mes)](+)[closo-nido-H(11)B(10)C(2)-C(2)B(10)H(12)](-) (3acCA) (cCA = conjucto-carborane anion = [closo-nido-H(11)B(10)C(2)-C(2)B(10)H(12)](-)) as a sole product in 71% yield. The formation of this conjucto anion can be taken as a strong support for the participation of a radical-chain mechanism in the ostensible nucleophilic addition which we suppose to be initiated by the formation of the [(mes)(2)Fe(+)]˙ radical cation. The structures of both 3PF(6) and 3acCA have been established by X-ray diffraction and the constitution of all compounds isolated is in agreement with elemental analyses, multinuclear NMR data, and MS spectra.     

Rationally designed pincer-type heck catalysts bearing aminophosphine substituents: Pd IV intermediates and palladium nanoparticles

The aminophosphine-based pincer complexes [C6H3-2,6-(XP(piperidinyl)2)2Pd(Cl)] (X=NH 1; X=O 2) are readily prepared from cheap starting materials by sequential addition of 1,1',1'-phosphinetriyltripiperidine and 1,3-diaminobenzene or resorcinol to solutions of [Pd(cod)(Cl)2] (cod=cyclooctadiene) in toluene under N2 in "one pot". Compounds 1 and 2 proved to be excellent Heck catalysts and allow the quantitative coupling of several electronically deactivated and sterically hindered aryl bromides with various olefins as coupling partners at 140 degrees C within very short reaction times and low catalyst loadings. Increased reaction temperatures also enable the efficient coupling of olefins with electronically deactivated and sterically hindered aryl chlorides in the presence of only 0.01 mol % of catalyst. The mechanistic studies performed rule out that homogeneous Pd 0 complexes are the catalytically active forms of 1 and 2. On the other hand, the involvement of palladium nanoparticles in the catalytic cycle received strong experimental support. Even though pincer-type Pd IV intermediates derived from 1 (and 2) are not involved in the catalytic cycle of the Heck reaction, their general existence as reactive intermediates (for example, in other reactions) cannot be excluded. On the contrary, they were shown to be thermally accessible. Compounds 1 and 2 show a smooth halide exchange with bromobenzene to yield their bromo derivatives in DMF at 100 degrees C. Experimental observations revealed that the halide exchange most probably proceeded via pincer-type Pd IV intermediates. DFT calculations support this hypothesis and indicated that aminophosphine-based pincer-type Pd IV intermediates are generally to be considered as reactive intermediates in reactions with aryl halides performed at elevated temperatures.     

Acid-Induced Opening of [closo-B(10)H(10)](2-) as a New Route to 6-Substituted nido-B(10)H(13) Decaboranes and Related Carboranes

Protonation of the polyhedral anion [closo-B(10)H(10)](2-) under superacidic conditions apparently generates an electrophilic intermediate, [B(10)H(13)](+), that forms 6-R-nido-B(10)H(13) (R = aryl, alkyl, triflate) derivatives by electrophilic aromatic substitution, C-H bond activation, or ion-pair collapse, respectively. The proposed mechanism of formation of the 6-R-nido-B(10)H(13) derivatives via the boranocation [B(10)H(13)](+) is discussed. The synthesis of carboranes, starting from 6-R-nido-B(10)H(13) decaboranes, and single-crystal X-ray diffraction analyses of several 6-R-nido-B(10)H(13) decaboranes and carboranes are described.