甲壳型液晶高分子的构筑、自组装及其功能化

甲壳型液晶高分子的发展很大程度上依赖于聚合物自组装的发展,而各种可设计、可预测、可调控的自组装策略的涌现,将甲壳型液晶高分子研究推向前所未有的高度,同时也极大地丰富了高分子化学与物理的内容,提升了研究水准.研究表明,侧链"甲壳效应"在调控甲壳型液晶高分子有序结构等方面有着重要作用.本综述从甲壳型液晶高分子设计合成、液晶相态调控、嵌段共聚物自组装和功能化应用等方面,总结和评述了近年来该领域国内的最新研究进展.最后,本综述总结了甲壳型液晶高分子在发展中所面临的主要问题,并对其发展趋势进行了展望.     

甲壳型液晶高分子研究进展与展望

简要介绍了甲壳型液晶高分子的模型理论, 概述了当前国内外对甲壳型液晶高分子设计、 液晶相态、 性质及基于甲壳型液晶高分子的嵌段共聚物体系的设计和自组装性质等研究进展, 展望了今后的研究方向.     

一种新型甲壳型液晶高分子的设计与合成

甲壳型液晶高分子是我国科学家最早设计和合成、受到国际学术界广泛关注的一类新型液晶高分子[1～ 6 ] .迄今已合成出 1 0个系列 1 0 0多种甲壳型液晶高分子 ,其中多数以乙烯基氢醌 [7] 、乙烯基对苯二胺 [8] 、乙烯基对苯二甲酸 [9] 和 2 -羟基 - 5-氨基苯乙烯 [10 ] 为关键中间体 .液晶核由 3个苯环以— COO—或— CONH—连接而成 .由于— COO—和— CONH—易与阳离子和阴离子相互作用 ,故已报道的甲壳型液晶高分子都是由自由基聚合反应制得 ,而很难用离子型聚合反应合成 .本文设计合成了一类未见文献报道的小分子液晶化合物 ,由此…     

Synthesis and properties of mesogen‐jacketed liquid crystalline polymers containing biphenyl mesogen with asymmetric substitutions

This work focuses on the design, synthesis, and characterization of a series of mesogen‐jacketed liquid crystalline polymers (MJLCPs), poly(alkyl 4′‐(octyloxy)‐2‐vinylbiphenyl‐4‐carboxylate) (pVBP(m,8), m = 1, 2, 4, 6, 8, 10, 12). For the first time, we realized asymmetric substitutions in the mesogens of MJLCPs. The polymers obtained by conventional free radical polymerization were investigated in detail by a combination of various techniques, such as differential scanning calorimetry, wide‐angle X‐ray diffraction, and polarized light microscopy. Our results showed that all the polymers were thermally stable, and their glass transition temperatures decreased when m increased. The liquid crystalline (LC) phases that developed at high temperatures and disappeared at low temperatures were strongly dependent on the difference in lengths of alkyl groups on the 4 and 4′ substitution positions of the side‐chain biphenyl. While polymer pVBP(1,8) was not liquid crystalline, columnar liquid crystalline phases were observed for all other pVBP(m,8) (m = 2, 4, 6, 8, 10, 12) polymers. Polymer pVBP(8,8) showed a tetragonal columnar nematic liquid crystalline phase, and the other LC polymers exhibited columnar nematic phases. In additions, the smaller the difference in the lengths of the terminal alkyls, the easier the development of the liquid crystalline phase. Birefringence measurements showed that solution‐cast polymer films exhibited moderately high positive birefringence values, indicating potential applications as optical compensation films for liquid crystal displays. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Design,synthesis, and characterization of a combined main‐chain/side‐chain liquid crystalline polymer based on mesogen‐jacketed liquid crystal polymer via atom transfer radical polymerization

A novel combined main‐chain/side‐chain liquid crystalline polymer based on mesogen‐jacketed liquid crystal polymers (MJLCPs) containing two biphenyls per mesogenic core of MJLCPs main chain, poly(2,5‐bis{[6‐(4‐butoxy‐4′‐oxy‐biphenyl)hexyl]oxycarbonyl}styrene) (P1–P8) was successfully synthesized via atom transfer radical polymerization (ATRP). The chemical structure of the monomer was confirmed by elemental analysis, ¹H NMR, and ¹³C NMR. The molecular characterizations of the polymer with different molecular weights (P1–P8) were performed with ¹H NMR, gel permeation chromatography (GPC), and thermogravimetric analysis (TGA). Their phase transitions and liquid‐crystalline behaviors of the polymers were investigated by differential scanning calorimetry (DSC) and polarized optical microscope (POM). We found that the polymers P1–P8 exhibited similar behavior with three different liquid crystalline phases upon heating to or cooling in addition to isotropic state, which should be related to the complex liquid crystal property of the side‐chain and the main‐chain. Moreover, the transition temperatures of liquid crystalline phases of P1–P8 are found to be dependent on the molecular weight. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7310–7320, 2008     

Liquid Crystalline Polymers

History of Liquid Crystalline PolymersThe liquid crystalline(LC)state was first observed by Austrian botanist and chemist F.Reinitzer more than a century ago,and it was then confirmed in 1888 by German physicist O.Lehmann who named such a state of matter as"liquid crystal"in 1900.While low molecular mass(LMM)liquid crystals were successfully used in LC displays(LCDs),the development of LC polymers(LCPs)followed an independent path.Conceptually,LCPs are prepared with the incorporation of mesogenic groups that are responsible for the formation of LC mesophases,such as rod-like(calamitic)and discotic ones,into polymer chains.Depending on where the mesogens are attached,traditionally there are three major categories of LCPs.Main-chain LCPs(MCLCPs)have mesogens in the polymer backbone,while mesogens of side-chain LCPs(SCLCPs)are incorporated as side groups in a polymer with a relatively flexible main chain.In main-chain/side-chain combined LCPs(MCSCLCPs),mesogens are in both the backbone and side chains.Other classes of LCPs include mesogenjacketed LCPs(MJLCPs),dendronized LCPs,and LC networks(LCNs).     

Synthesis of a novel star liquid crystal polymer using trifunctional initiator via atom transfer radical polymerization

In this paper, two types of three-arm star mesogen-jacketed crystal polymers (MJLCPs) with different core (that is hard core and soft core) were synthesized by 2,5-bis[(4-methoxyphenyl)oxycarbonyl]styrene (MPCS), which was initiated by two different trifunctional initiators 1,3,5-(2′-bromo-2′-methylpropionato)benzene (I_a) and 1,1,1-tris(2-bromoisobutyryloxymethyl)propane (I_b), respectively. Characterization of these polymers by ¹H NMR and GPC clearly supported the formation of a three-arm star-shaped PMPCS. The resulting three-arm star PMPCS possessed narrow molecular weight distribution, and its molecular weight (M_n,NMR) agreed well with the theoretical value, which reveals the quantitative initiation efficiency. The liquid-crystalline behaviors of the two types of three-arm star polymer with different structure were also investigated by differential scanning calorimeter (DSC) and polarized optical microscope (POM). We found that the liquid-crystalline behavior was incorrelated with structure of core but correlated with the length of three-arm star polymer arm. Only each arm of the three-arm star-shaped polymers with a M_n,GPC beyond 0.90 × 10⁴ g/mol could form a liquid crystalline phase,which was found to be stable up to the decomposition temperature of these tri-arm MJLCPs.     

侧基含纳米构筑单元的甲壳型液晶高分子的多层次自组装

甲壳型液晶高分子可以呈现超分子柱或片层的链构象,因此可以作为超分子液晶基元形成多种液晶相态,如六方柱状相、柱状向列相、六方柱状向列相、近晶相等.将纳米构筑单元,如一维的二联苯、二维的苯并菲、三维的多面体低聚倍半硅氧烷(POSS)等,引入到甲壳型液晶高分子中,所得聚合物可以自组装形成在亚十纳米和近纳米尺度的多级有序结构.这些结构具有尺寸可控及单分散的优点,可望在有机光电、纳米多孔膜以及纳米光刻等领域有着广阔的应用前景.本文主要介绍了将二联苯、偶氮苯、棒状多苯结构、苯并菲和POSS基元引入到甲壳型液晶高分子中制备多级组装结构的相关工作.     

Influence of molecular weight on liquid crystalline behavior of linear and star mesogen‐jacketed liquid crystal polymers

A series of novel multi‐armed (di‐, tri‐ and tetra‐armed) mesogen‐jacketed liquid crystal polymers (MJLCPs) were synthesized by atom transfer radical polymerization (ATRP) of {2,5‐bis[(4‐methoxyphenyl)oxycarbonyl]styrene}(MPCS) using di‐, tri‐ and tetrafunctional initiator, respectively. The results show that the number average molecular weight (M_n,GPC) was increased versus monomer conversion, and the polydispersities were quite narrow (<1.19), which is the characteristic of controlled polymerization. The chemical structures of these multi‐armed mesogen‐jacketed liquid crystal polymers were confirmed by ¹H NMR. The liquid crystalline behavior of these multi‐armed MJLCPs with arms ranging from two to four was studied by differential scanning calorimetry (DSC), polarized optical microscopy (POM) and wide‐angle X‐ray diffraction (WAXD). It was found that liquid crystalline phases appeared simply when the number molecular weights (M_n,GPC) of these multi‐armed MJLCPs was higher than a certain critical values, that is, M_n,GPC > 1.87 × 10⁴ g/mol, 1.84 × 10⁴ g/mol, 2.69 × 10⁴ and 3.68 × 10⁴ g/mol, which were initiated by coil difunctional initiator, hard difunctional initiator, trifunctional initiator and tetrafunctional initiator, respectively. All the liquid crystalline phase was found to be stable up to the decomposition temperature of these multi‐armed MJLCPs. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3232–3244, 2005     

Synthesis and polymerization of 2,5‐Bis(4′‐alkoxy‐phenyl)styrene for mesogen‐jacketed liquid crystal polymers

A series of novel reactive liquid crystals, 2,5‐bis(4′‐alkoxy‐phenyl)styrene, was designed and synthesized to prepare stereoregular mesogen‐jacketed liquid crystal polymers (MJLCPs). These monomers are different from their analogous studied previously in that they do not contain polar linkages such as ester or/and amide group and therefore are expected to polymerize easily both by radical and ionic polymerization. The preliminary studies show that the resulting polymers have higher glass transition temperature (Tg) and much better thermal stability than their analogous.     

甲壳型液晶高分子研究进展

介绍了近年在甲壳型液晶高分子的设计、合成、表征以及结构与性能关系探索方面的进展,对今后的研究方向提出了粗浅的看法。     

甲壳型液晶聚合物纤维的形状记忆效应

采用TA-Q800动态热机械分析仪(DMA)研究了聚乙烯基对苯二甲酸二(对丁氧基苯)酯(PBPCS)纤维的形变回复性能,发现PBPCS纤维具有非常好的形状记忆效应,在145℃及以上温度,形状回复速率最好,9min左右可以从400%的伸长回复到原来的尺寸,于145℃,重复实验5次,结果说明形变回复重复性好.二维X衍射(2DX-Ray)研究显示形变前后PBPCS柱状分子直径d由2.54nm变为2.42nm,表明拉伸后PBPCS螺旋状的大分子主链处于更为伸直的构象,因此分子主链产生一定的内应力,即形变回复应力.由此可见,PBPCS相对柔性的聚乙烯主链使纤维具有良好的形变回复性能,而侧基的甲壳效应使得纤维能够保持初始尺寸,即PBPCS所具有的类似弹簧的特殊螺旋状分子结构是其纤维具有形状记忆效应的内在原因.     

Ordered nanostructures at two different length scales mediated by temperature: A triphenylene‐containing mesogen‐jacketed liquid crystalline polymer with a long spacer

A mesogen‐jacketed liquid crystalline polymer (MJLCP) containing triphenylene (Tp) moieties in the side chains with 12 methylene units as spacers (denoted as PP12V) was synthesized. Its liquid crystalline (LC) phase behavior was studied with a combination of solution ¹H NMR, solid‐state NMR, gel permeation chromatography, thermogravimetric analysis, polarized light microscopy, differential scanning calorimetry, and one‐ and two‐dimensional wide‐angle X‐ray diffraction. By simply varying the temperature, two ordered nanostructures at sub‐10‐nm length scales originating from two LC building blocks were obtained in one polymer. The low‐temperature phase of the polymer is a hexagonal columnar phase (Φ_H, a = 2.06 nm) self‐organized by Tp discotic mesogens. The high‐temperature phase is a nematic columnar phase with a larger dimension (a′ = 4.07 nm) developed by the rod‐like supramolecular mesogen—the MJLCP chain as a whole. A re‐entrant isotropic phase is found in the medium temperature range. Partially homeotropic alignment of the polymer can be achieved when treated with an electric field, with the polymer in the Φ_H phase developed by the Tp moieties. The incorporation of Tp moieties through relatively long spacers (12 methylene units) disrupts the ordered packing of the MJLCP at low temperatures, which is the first case for main‐chain/side‐chain combined LC polymers with MJLCPs as the main‐chain LC building block to the best of our knowledge. The relationship of the molecular structure and the novel phase behavior of PP12V has implications in the design of LC polymers containing nanobuilding blocks toward constructing ordered nanostructures at different length scales. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 295–304     

Unusual effect of molecular weight and concentration on thermoresponsive behaviors of well‐defined water‐soluble semirigid polymers

A series of water‐soluble semirigid thermoresponsive polymers with well‐defined molecular weights based on mesogen‐jacketed liquid crystal polymers (MJLCPs), poly[bis(N‐hydroxyisopropyl pyrrolidone) 2‐vinylterephthalate] (PHIPPVTA) have been synthesized via reversible addition fragmentation chain transfer (RAFT) polymerization. Dynamic light scattering (DLS) revealed that the novel monomer and polymers have thermoresponsive properties with cloud point in the range between 10 and 90 °C. The cloud point was increased by 56.2 °C when the polymer molecular weight increased from 0.47 × 10⁴ g mol^?1 to 3.69 × 10⁴ g mol^?1. In addition, the cloud point of PHIPPVTA was decreased by 18.8 °C with the increase of polymer concentration from 5 to 10 mg mL^?1. A slight increase (0.1–3.5 °C) of cloud point has been observed after knocking off the end‐groups of PHIPPVTA. Moreover, the cloud point of polymer increased with increasing of its molecular weight with or without the trithiocarbonate end‐groups, which showed the opposite trend comparing with other thermoresponsive polymers with flexible backbones. These polymers show a dramatic solvent isotopic effect that the cloud point in D₂O was lower than in H₂O. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Influence of different linkage groups in biphenyl mesogenic core on phase behaviors of mesogen‐jacketed liquid crystalline polymers

The work focuses on the design, synthesis, and characterization of a series of mesogen‐jacketed liquid crystalline polymers (MJLCPs) based on the octyl substituted biphenyl mesogenic core through different linkage groups. The molecular characterizations of the polymers obtained by conventional free radical polymerization were performed with ¹H NMR, gel permeation chromatography, and thermogravimetric analysis. Their thermotropic liquid crystalline (LC) behaviors were investigated in detail by a combination of various techniques, such as polarized light microscopy, differential scanning calorimetry, and 1D and 2D wide‐angle X‐ray diffraction. Our results showed that all the polymers were thermally stable, and their LC phases were greatly dependent on the linking groups between the biphenyl mesogenic core and terminal alkyl group substituent. Polymers with ether/ester or ether linkage group exhibited an unusual phase behavior with temperature increasing, tetragonal columnar nematic LC phase, or columnar nematic phase developed at high temperatures for the polymers transformed into amorphous phase during cooling process, showing a re‐entrant phase behaviors. However, polymers with ester linkage group were not LC with temperature varied. It is illustrated that subtle changes in the molecular structure brought about tremendous variation of the LC phase properties for MJLCPs. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2545–2554     

Influence of alkoxy tail length and unbalanced mesogenic core on phase behavior of mesogen‐jacketed liquid crystalline polymers

When the flexible terminal substituent changes from butoxy to hexyloxy or longer, smectic C (S_C) liquid crystalline phase was firstly reported to develop from a kind of mesogen‐jacketed liquid crystalline polymer (MJLCP) whose mesogenic side groups are unbalancedly bonded to the main chain without spacers. A series of MJLCPs, poly[4,4′‐bis(4‐alkoxyphenyl)‐2‐vinylbiphenyl(carboxide)] (nC2Vp, n is the number of the carbons in the alkoxy groups, n = 2, 4, 6, 8, 10, and 12) were designed and synthesized successfully via free radical polymerization. The molecular weights of the polymers were characterized with gel permeation chromatography, and the liquid crystalline properties were investigated by differential scanning calorimetry, polarized light microscopy experiments, and 1D, 2D wide‐angle X‐ray diffraction. Comparing with the butoxy analog, the polymer with unbalanced mesogenic core and shorter flexible substituents (n = 2, 4) keeps the same smectic A (S_A) phase, but other polymers with longer terminal flexible substituents (n = 6, 8, 10, and 12) can develop into a well‐defined S_C phase instead of S_A phase. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 505–514, 2009     

Elaboration and electro-optic study of a new type of open porosity PDLC

A new polymer dispersed liquid crystal (PDLC) system characterized by easy processing and an open porosity has been elaborated. This PDLC is based on a pre-formed, porous, thin polymer film of a commercially available PVDF-HFP copolymer wetted by the eutectic mixture of cyano bi- and ter-phenyls known as E7 (Merck Ltd, UK). This new process is of interest because of its simplicity, and the fact that there is no risk of intermixing between the liquid crystal and the polymer matrix as occurs in a conventional PDLC. An electric field applied across the thin film results in a change in its transmission, due to the reorientation of the liquid crystal director, as already known for closed porosity PDLCs. The electro-optic properties of this PDLC have been studied and semi-quantitatively interpreted on the basis of the response theory of conventional closed porosity PDLCs.     

SYNTHESIS AND PROPERTIES OF NEW MESOGEN-JACKETED LIQUID CRYSTALLINE POLYMERS*

Some new mesogen-jacketed liquid crystalline polymers (MJLCP) with polymer backbones, spacers, andmesogenic units of different structures were synthesized by radical polymerization. The mesomorphic behavior of thesepolymers was examined using differential scanning calorimetry (DSC) and polarizing optical microscopy (POM). Theirliquid crystallinity is influenced by the variation of polymer backbone, spacer, mesogenic unit and its terminal groups. Theresults show that 1) a more flexible polymer main-chain is more favorable to the formation of a liquid crystal phase, while 2)a flexible spacer will decrease the "Jacket Effect" and the liquid crystallinity and 3) a subtle modification of the terminalgroups on the mesogenic unit may also have a significant influence on properties of the polymers.     

一种侧链液晶高分子的合成与表征

合成了一种主链为甲基丙烯酸酯 ,侧链是三个苯环以酯键相连的介晶基元 ,柔性间隔段为两个亚甲基的新的侧链液晶高分子 .聚合物和单体的化学结构、液晶相转变和液晶态织构采用红外光谱、核磁共振、偏光显微镜、差热分析和广角X光衍射进行了表征 .研究表明 ,单体呈现近晶相和向列相两个液晶相 ,聚合物在很宽的温度范围内呈向列相 .该单体和聚合物在一定条件下可形成固化诱导条带织构     

有机硅改性席夫碱聚氨酯型液晶固定相的制备、表征及色谱性能

以对苯二胺、3-氯丙醇和4-羟基苯甲醛为原料,合成对苯二(对苯丙氧基醇)亚胺液晶基元,再与对苯二异氰酸酯和1,3-双(3-氨基丙基)四甲基二硅氧烷反应,合成席夫碱型硅氧烷聚氨酯液晶聚合物。 通过红外光谱法、X射线衍射、热分析、偏光显微镜等技术手段对其结构和性能进行了表征。 结果表明,该物质为席夫碱有机硅聚氨酯液晶聚合物,属于近晶相液晶,液晶区间为103~150 ℃,热分解温度为300 ℃。 用席夫碱型硅氧烷聚氨酯液晶固定相制备填充色谱柱,考察固定液的相对极性及其对取代苯位置异构体的色谱分离性能。 合成的席夫碱型硅氧烷聚氨酯液晶聚合物的液晶温度范围为103~146 ℃,属于强极性固定液(P_x=79),各组分色谱峰的分离度为0.96~3.33。