Interaction of bare and gold-coated superparamagnetic iron oxide nanoparticles with fetal bovine serum

Superparamagnetic iron oxide nanoparticles (SPIONs) are being increasingly used in various biomedical processes such as hyperthermia, cell and protein separation, enhancing resolution of magnetic resonance imaging and drug delivery. Here, SPIONs were prepared by optimized co-precipitation of iron chlorides in basic medium and then coated with gold. Bare SPIONs and Aucoated SPIONs were characterized by TEM before incubation with fetal bovine serum for 0.5, 1, 2, 4, 8 and 24 h. After these interaction times, the mixture was deposed on a small column in a strong magnetic field (MACS?system). The SPIONs were retained; different washing fractions were collected and studied by UV-Vis spectroscopy and by 1D gel electrophoresis. The study revealed the presence of proteins in the washing solutions and confirmed the strong interaction of the protein with the SPIONs.     

Polysaccharide-modified iron oxide nanoparticles as an effective magnetic affinity adsorbent for bovine serum albumin

The magnetic separation technique based on magnetic iron oxide nanoparticles (MNPs) has potential applications in protein adsorption and purification, enzyme immobilization, cell sorting, nucleic acid detachment, and drug release. However, the naked MNPs are often insufficient for their hydrophilicity, colloidal stability, and further functionalization. To overcome these limitations, chitosan was firstly carboxymethylated and then covalently conjugated on the surface of the MNPs ranging in size from about 5 to 15 nm, which were prepared by co-precipitating iron (II) and iron (III) in alkaline solution and then treating under hydrothermal conditions. It was found that such modification did not result in the phase change of the MNPs, and the resultant modified nanoparticles were still superparamagnetic. In particular, the colloidal stability of MNPs in aqueous suspension was improved after the surface modification. By investigating the adsorption of bovine serum albumin (BSA) on the modified MNPs, it was observed that the adsorption capacity of the BSA on the modified MNPs increased rapidly within several minutes and then reached the maximum value at about 10 min. The adsorption equilibrium isotherm could be fitted well by the Langmuir model. The medium pH affected greatly the adsorption of the BSA. The maximum adsorption of the BSA occurred at the pH value close to the isoelectric point of the BSA, with a saturation adsorption amount of 94.45 mg/g (25 °C). For the BSA feed concentration of 1.017 mg/ml, a high desorption percentage of 91.5% could be achieved under an alkaline condition (pH 9.4).     

Insight into serum protein interactions with functionalized magnetic nanoparticles in biological media

Surface modification with linear polymethacrylic acid (20 kDa), linear and branched polyethylenimine (25 kDa), and branched oligoethylenimine (800 Da) is commonly used to improve the function of magnetite nanoparticles (MNPs) in many biomedical applications. These polymers were shown herein to have different adsorption capacity and anticipated conformations on the surface of MNPs due to differences in their functional groups, architectures, and molecular weight. This in turn affects the interaction of MNPs surfaces with biological serum proteins (fetal bovine serum). MNPs coated with 25 kDa branched polyethylenimine were found to attract the highest amount of serum protein while MNPs coated with 20 kDa linear polymethacrylic acid adsorbed the least. The type and amount of protein adsorbed, and the surface conformation of the polymer was shown to affect the size stability of the MNPs in a model biological media (RPMI-1640). A moderate reduction in r(2) relaxivity was also observed for MNPs suspended in RPMI-1640 containing serum protein compared to the same particles suspended in water. However, the relaxivities following protein adsorption are still relatively high making the use of these polymer-coated MNPs as Magnetic Resonance Imaging (MRI) contrast agents feasible. This work shows that through judicious selection of functionalization polymers and elucidation of the factors governing the stabilization mechanism, the design of nanoparticles for applications in biologically relevant conditions can be improved.     

磁性铁氧化物纳米粒子制备及其体内应用研究

磁性铁氧化物纳米粒子由于其生物相容性和低毒性而广泛的应用于生物医学领域。本文总结了近年来制备各种磁性铁氧化物纳米粒子的方法,比较了它们在粒径、结晶度以及制备条件等方面的优缺点,概括了对其进行表面修饰改性材料的种类,阐述近年来磁性铁氧化物纳米粒子在体内应用中药物运输、磁共振成像、磁热疗方面的进展,并指出当前应用中的主要方向和亟待解决的问题。     

Structural-morphological and biological properties of selenium nanoparticles stabilized by bovine serum albumin

Nanostructures formed during the reduction of ionic selenium in the selenite-ascorbate redox system in an aqueous solution of bovine serum albumin (BSA) were studied using static and dynamic light scattering and flow birefringence. It was established that this process results in the formation of stable aggregates of selenium nanoparticles that adsorb BSA molecules. It was found that highly-ordered superhigh-molecular-weight spherical nanostructures with high density and unique morphology are formed. Experiments with a cell culture of promyelocytic leukemia HL-60 showed that BSA adsorbed on selenium nanoparticles can inhibit the growth of tumor cells and deactivate free radicals with an efficiency comparable with that of sodium selenite.     

Synthesis and characterization of poly(divinylbenzene)-coated magnetic iron oxide nanoparticles as precursor for the formation of air-stable carbon-coated iron crystalline nanoparticles

Maghemite (gamma-Fe2O3) nanoparticles of 15 +/- 3 nm diameter were prepared by nucleation of gelatin/iron oxide followed by growth of gamma-Fe2O3 films onto these nuclei. The gamma-Fe2O3 nanoparticles were coated with polydivinylbenzene (PDVB) by emulsion polymerization of divinylbenzene (DVB) in an aqueous continuous phase containing the gamma-Fe2O3 nanoparticles. The PDVB-coated gamma-Fe2O3 nanoparticles, dispersed in water, were separated from homo-PDVB nanoparticles using the high gradient magnetic field (HGMF) technique. The influence of DVB concentration on the amount of PDVB coating, on the size and size distribution of the coated gamma-Fe2O3 nanoparticles and on their magnetic properties, has been investigated. Air-stable carbon-coated iron (alpha-Fe/C) crystalline nanoparticles of 41 +/- 12 nm diameter have been prepared by annealing the PDVB-coated gamma-Fe2O3 nanoparticles at 1050 degrees C in an inert atmosphere. These nanoparticles exhibit high saturation magnetization value (83 emu g(-1)) and excellent resistance to oxidation. Characterization of the PDVB-coated gamma-Fe2O3 and of the alpha-Fe/C nanoparticles has been accomplished by TEM, HRTEM, DLS, FTIR, XRD, thermal analysis, zeta-potential, and magnetic measurements.     

Comparison and functionalization study of microemulsion-prepared magnetic iron oxide nanoparticles

Magnetic iron oxide nanoparticles (MION) for protein binding and separation were obtained from water-in-oil (w/o) and oil-in-water (o/w) microemulsions. Characterization of the prepared nanoparticles have been performed by TEM, XRD, SQUID magnetometry, and BET. Microemulsion-prepared magnetic iron oxide nanoparticles (ME-MION) with sizes ranging from 2 to 10 nm were obtained. Study on the magnetic properties at 300 K shows a large increase of the magnetization ~35 emu/g for w/o-ME-MION with superparamagnetic behavior and nanoscale dimensions in comparison with o/w-ME-MION (10 emu/g) due to larger particle size and anisotropic property. Moringa oleifera coagulation protein (MOCP) bound w/o- and o/w-ME-MION showed an enhanced performance in terms of coagulation activity. A significant interaction between the magnetic nanoparticles and the protein can be described by changes in fluorescence emission spectra. Adsorbed protein from MOCP is still retaining its functionality even after binding to the nanoparticles, thus implying the extension of this technique for various applications.     

pH-dependent magnetic phase transition of iron oxide nanoparticles synthesized by gamma-radiation reduction method

In this study, the influence of pH variation on structural and magnetic phase transition of gamma radiolytic synthesized iron oxide nanoparticles is investigated. The structure and magnetic properties of irradiated samples are characterized using X-ray diffraction, Fourier transfer infrared spectroscopy, transmission electron microscopy, and vibrating sample magnetometer. It was found that, in acidic irradiated solution, Fe³⁺ ions make various complexes with polyvinyl alcohol and water molecules which exhibit a multiphase magnetic property as a mixture of dia and paramagnetic materials. On the other hand, in basic condition, rate of radiation induced reduction of Fe³⁺ ions increased which leads to the formation of superparamagnetic Fe₃O₄ nanoparticles. By increasing pH value, in strong basic condition, the tendency of paramagnetic iron (III) oxy-hydroxide formation was high compared to other phases. This variation in the magnetic properties was explained based on iron ions reduction mechanism and the variation of the ligands’ properties during formation of nanoparticles under irradiation.     

Enantioselective sorption of some chiral carboxylic acids by various cyclodextrin-grafted iron oxide magnetic nanoparticles

A new enantioselective sorption approach to chiral carboxylic acid molecules such as (R)-(?)-N-(3,5-dinitrobenzoyl)phenylglycine (R)-(?)DNBPG, (S)-(+)-N-(3,5-dinitrobenzoyl)phenylglycine (S)-(+)DNBPG, (R)-(+)-N-(1-phenylethyl)phthalamic acid (R)-(+)PEPA and (S)-(?)-N-(1-phenylethyl)phthalamic acid (S)-(?)PEPA regarding their complexation with three diversely functionalized β-cyclodextrin grafted iron oxide nanoparticles in the aqueous phase, was developed. The sorption efficiencies of these carboxylic acids were carried out by high-performance liquid chromatography (HPLC) with an Ace 5 C18 column. The effects of temperatures on the sorption were also investigated. The results showed that the ether functionalized derivative of β-cyclodextrin Al-CD-MNPs has a specific affinity for (R)-(?)DNBPG at 30 °C and pH 7.0. The amine functionalized derivative of β-cyclodextrin Am-CD-MNPs has a greater affinity towards not only (S)-(?)DNBPG, but also (R)-(+)PEPA compared with their other isomers, which are the (R)-isomer of DNBPG and the (S)-isomer of PEPA at 30 °C and pH 7.0. In addition, although amide functionalized derivatives of β-cyclodextrin (Amd-CD-MNPs) have an affinity towards both isomers of some chiral carboxylic acids; no selective affinity was observed at 30 °C and pH 7.0.     

Synthesis of monodisperse biotinylated p(NIPAAm)-coated iron oxide magnetic nanoparticles and their bioconjugation to streptavidin

We describe here the synthesis of 10 nm, monodisperse, iron oxide nanoparticles that we have coated with temperature-sensitive, biotinylated p(NIPAAm) (b-PNIPAAm). The PNIPAAm was prepared by the reversible addition fragmentation chain transfer polymerization (RAFT), and one end was biotinylated with a PEO maleimide-activated biotin to form a stable thioether linkage. The original synthesized iron oxide particles were stabilized with oleic acid. They were dispersed in dioxane, and the oleic acid molecules were then reversibly exchanged with a mixture of PNIPAAm and b-PNIPAAm at 60 degrees C. The b-PNIPAAm-coated magnetic nanoparticles were found to have an average diameter of approximately 15 nm by dynamic light scattering and transmission electron microscopy. The ability of the biotin terminal groups on the b-PNIPAAm-coated nanoparticles to interact with streptavidin was confirmed by fluorescence and surface plasmon resonance. It was found that the b-PNIPAAm-coated iron oxide nanoparticles can still bind with high affinity to streptavidin in solution or when the streptavidin is immobilized on a surface. We have also demonstrated that the binding of the biotin ligands on the surface of the temperature-responsive magnetic nanoparticles to streptavidin can be turned on and off as a function of temperature.     

Chemical guiding of magnetic nanoparticles in dispersed media containing poly-(methylmethacrylate-co-vinylpyrrolidone)

The differential reactivity of methylmethacrylate (MMA) and vinylpyrrolidone (VP) in free radical copolymerization, with stirring in methanol, renders an emulsified two phase system. The dispersed and continuous liquid phases contain copolymers rich in MMA and VP, respectively. When Fe(3)O(4) magnetic nanoparticles (mNPs) stabilized with tetramethylammonium hydroxide are added to this emulsion, the mNPs are located in the continuous phase. Very small chemical changes in the methacrylic or vinylic chains are able to guide the mNP toward the interface or to the inside of the dispersed phase since quite a selective functionalization of each phase may be achieved separately. Thus, a small addition of methacrylic acid as comonomer (0.5% molar) guides all of the mNPs to the interface while a 0.5% molar of sulfopropyl methacrylate induces the migration of all mNPs to the dispersed phase. When 0.5% molar of a VP derivative bearing sulfonate functionality is added, the mNPs are found both in the interface and in the continuous phase. The addition of water allows solid MMA-based microspheres to be obtained incorporating the mNPs selectively either at the surface or in the core.     

Sonochemical formation of iron oxide nanoparticles in ionic liquids for magnetic liquid marble

Ionic liquids (ILs)-stabilized iron oxide (Fe(2)O(3)) nanoparticles were synthesized by the ultrasonic decomposition of iron carbonyl precursors in [EMIm][BF(4)] without any stabilizing or capping agents. The Fe(2)O(3) nanoparticles were isolated and characterized by X-ray powder diffraction, transmission electron microscopy and susceptibility measurements. The physicochemical properties of ILs containing magnetic Fe(2)O(3) nanoparticles (denoted as Fe(2)O(3)@[EMIm][BF(4)]), including surface properties, density, viscosity and stability, were investigated in detail and compared with that of [EMIm][BF(4)]. The Fe(2)O(3)@[EMIm][BF(4)] can be directly used as magnetic ionic liquid marble by coating with hydrophobic and unreactive polytetrafluoroethylene (PTFE), for which the effective surface tension was determined by the puddle height method. The resulting magnetic ionic liquid marble can be transported under external magnetic actuation, without detachment of magnetic particles from the marble surface that is usually observed in water marble.     

Viral-induced self-assembly of magnetic nanoparticles allows the detection of viral particles in biological media

Monodisperse magnetic nanoparticles conjugated with virus-surface-specific antibodies self-assemble in the presence of specific viral particles to create supramolecular structures with enhanced magnetic properties, as detected by magnetic resonance methods (NMR/MRI). The observed magnetic relaxation changes that occur upon viral-induced assembly allowed for highly sensitive and selective detection of a virus in complex biological media. The developed method was shown to specifically detect adenovirus-5 and herpes simplex virus-1 at concentrations of 5 viral particles/10 muL without the need of extensive sample preparation. The applications of this new method span from high-throughput NMR detection of viruses in biological samples to potential MR imaging of viral distribution in vivo.     

A controlled approach to iron oxide nanoparticles functionalization for magnetic polymer brushes

In this article, we report a detailed study of surface modification of magnetite nanoparticles by means of three different grafting agents, functional for the preparation of magnetic polymer brushes. 3-Aminopropyltriethoxysilane (APTES), 3-chloropropyltriethoxysilane (CPTES), and 2-(4-chlorosulfonylphenyl)ethyltrichlorosilane (CTCS) were chosen as grafting models through which a wide range of polymer brushes can be obtained. By means of accurate thermogravimetric analysis a good control over the amount of immobilized molecules is achieved, and optimal operating conditions for each grafting agent are consequently determined. Graft densities ranging from approximately 4 to 7 molecules per nm(2) are obtained, depending on the conditions used. In addition, the surface-initiated atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) carried out with CTCS-coated nanoparticles is presented as an example of polymer brushes, leading to a well-defined and dense polymeric coating of around 0.6 PMMA chains per nm(2).     

Investigation of iron oxide nanoparticles by capillary zone electrophoresis

The electrophoretic behavior of γ-Fe₂O₃ nanoparticles was studied in aqueous solutions of Na₂SO₄-NaOH (pH 10.8) and of Na₂SO₄-Na₃cit (pH 7.1) as running electrolytes. Two electrophoretic zones (smooth and with spikes) due to colloidal and suspended particles of approximately the same size range were formed during the runs. The suspension stability and size distribution were shown to depend on the composition of electrolyte used for dispersing the solids. The effects of electric field strength, injection time, injection pressure as well as sodium citrate concentration were studied and particle electrophoretic mobilities were calculated. Electron micrographs of particles studied were obtained. Preparation of reference samples based on the colloidal γ-Fe₂O₃ has been discussed.     

Solid phase extraction-spectrophotometric determination of fluoride in water samples using magnetic iron oxide nanoparticles

A new, sensitive, fast and simple method using magnetic iron oxide nanoparticles (MIONs), as an adsorbent has been developed for extraction, preconcentration and determination of traces of fluoride ions. The determination method is based on the discoloration of Fe(III)-SCN complex with extracted fluoride ions which was subsequently monitored spectrophotometrically at λ_max = 458 nm. Various parameters affecting the adsorption of fluoride by the MIONs have been investigated, such as pH of the solution, type, volume and concentration of desorbing reagent, amount of adsorbent and interference effects. A linear response for the determination of fluoride was achieved in the concentration range of 0.040-1.250 μg mL⁻¹. The limit of detection (LOD) and limit of quantification (LOQ) for fluoride based on 3 times and 10 times the standard deviation of the blank (3S_b, 10S_b) were 0.015 and 0.042 μg mL⁻¹ (n = 20) for fluoride ion, respectively. A preconcentration factor of 50 was achieved in this method. The proposed procedure has been applied for determination of fluoride concentration in various water samples. The results obtained from this method were successfully compared with those provided by standard SPADNS method.     

Hydrophilic magnetic polymer latexes. 2. Encapsulation of adsorbed iron oxide nanoparticles

The encapsulation of seed polymer particles coated by anionic iron oxide nanoparticles has been investigated using N-isopropylacrylamide as a main monomer, N,N-methylene bisacrylamide as a crosslinking agent, itaconic acid as a functional monomer and potassium persulfate as an anionic initiator. The magnetic latexes obtained have been characterized with regard to particle size, iron oxide content and electrophoretic mobility. All these properties have been examined by varying several polymerization parameters: reaction medium, monomer(s) and crosslinking agent concentrations, nature of seed latexes and type of polymerization (batch versus shot process). The magnetic content in the polymer microspheres strongly depends on the polymerization procedure (i.e., encapsulation process) and varies between 6 and 23 wt%, and monodisperse magnetic polymer particles were obtained. Received: 28 December 1999 Accepted in revised form: 15 June 1999