Bis(hydroxyamino)triazines: versatile and high-affinity tridentate hydroxylamine ligands for selective iron(III) chelation

A new versatile family of chelating agents based on bis(hydroxyamino)-1,3,5-triazines, BHTs, is described. The properties of different BHT ligands are determined by electrochemistry, spectroscopy and titrimetry revealing high redox stability, transparency in the visible range, and diprotic acid-like behaviour in the 5-9 pH range. The iron(III) and iron(II)-BHT complexes were studied revealing high affinity of BHTs to iron(III). Electrochemical studies show exceptional preference of the BHT ligands to iron(III) over iron(II), this, in addition to their small size and their fast and reversible electrochemistry makes them potentially useful electrochemical redox couples for the low end of the aqueous potential window (<0.6 V, vs. NHE). The synthetic versatility of the new ligands allows easy tuning of the hydrophobicity, redox potential, and to some extent the stability constant of the complexes by alteration of the peripheral groups appended to the BHTs.     

Spectrophotometric Study of Mithramycin Complexes with Cu(II), Fe(III) and Tb(III)

Abstract

The coordination of the anticancer drug mithramycin to Tb(III), Fe(III) and Cu(II) was studied in aqueous solution using absorption measurements. The stability constants were calculated from equilibrium competition experiments by means of the SQUAD program. For both first ions, the competitor was oxalic acid and for the latter the competitor was the Cu(II) ions. Cu(II) at pH 7.5, Fe(III) at pH 3.5 and Tb(III) at pH 5.5 formed respectively 1:2, 1:3 and 1:4 metal-to-ligand species.     

An iron reservoir model based on ferrichrome: iron(III)-binding and metal(III)-exchange properties of tripodal monotopic and ditopic hydroxamate ligands with an L-alanyl-L-alanyl-N-hydroxy-beta-alanyl sequence

To gain knowledge about biological iron mobilization, tripodal monotopic and ditopic hydroxamate ligands (1 and 2) are prepared, and their iron-chelating properties are investigated. Ligands 1 and 2 contain three Ala-Ala-beta-(HO)Ala units and three [Ala-Ala-beta-(HO)Ala](2) units connected with tris(alanylaminoethyl)amine, respectively, and form six-coordinate octahedral complexes with iron(III) in aqueous solution. Ligand 1 and 1 equiv of iron give Fe-1, and ligand 2 and 1 or 2 equiv of iron produce Fe(1)-2, or Fe(2)-2. These complexes exhibit absorptions at lambda(max) 425 nm of epsilon 2800-3000/Fe, characteristic of tris(hydroxamato)iron(III) complexes, and preferentially assume the Delta-cis configuration. Loading of Fe(III) on 1, 2, and M(III)-loaded ligands (M-1 and M(1)-2, M = Al, Ga, In) with ammonium ferric oxalate at pH 5.4 is performed, and the second-order rate constants of loading with respect to Fe(III) and the ligand or M(III)-loaded ligands are determined. The rates of loading of Fe(III) on M-1 increase in the order Al-1 < Ga-1 < In-1, and those on M(1)-2 in the order Al(1)-2 < Ga(1)-2 < Fe(1)-2 < In(1)-2, indicating that the dissociation tendency of M(III) ions from the hydroxamate ligand is an important factor. The iron complexes formed with 2 are subjected to an iron removal reaction with excess EDTA in aqueous pH 5.4 solution at 25.0 degrees C, and the collected data are analyzed by curve-fitting using appropriate first-order kinetic equations, providing the rate constants for the upper site and the lower site of 2. Similar analysis for FeM-2 affords removal rate constants for Fe(up)-2, M(up)-2, and Fe(low)-2, and the iron residence probability at each site. The protonation constants of the hydroxamate groups for 1 and 2 (pK(1,) pK(2), pK(3), and pK(1,) pK(2)., pK(6)) are determined, and the proton-independent stability constants for Fe-1, the upper site of Fe(2)-2, and the lower site of Fe(1)-2 are 10(28), 10(29), and 10(28.5), respectively.     

Properties of Monocarboxy Cellulose Containing Sorbed Fe(III), Al(III), and Cr(III) Cations

Sorption of Fe(III), Al(III), and Cr(III) on monocarboxy cellulose at various pH, concentrations of metal chloride or sulfate in solution, and time was studied. The effect of type and amount of the cation sorbed on the physicomechanical properties, swelling, and stability in phosphate buffer of monocarboxy cellulose fibers was considered.     

Electrochemical characterization of the redox couple of Fe(III)/Fe(II) mediated by grafted polymer electrode

A new grafted polymer electrode (GPE) (polystyrene as polymer) was grafted with acrylonitrile as a monomer using gamma irradiation to produce a new grafted polymer. The redox process of K₃Fe(CN)₆ during cyclic voltammetry was studied by the new GPE. The ratio of Ipc/Ipa >1 of GPE to GCE Ipc/Ipa = 1.7, indicating that this electrode is a reversible electrode and can be used in conductivity studies by voltammetric analysis. The physical properties of the new electrode GP have good hardness, insolubility, and stability at different high temperatures and at different pH. Also, the sensitivity under conditions of cyclic voltammetry is significantly dependent on pH, electrolyte, and scan rate. At different scan rates, two oxidation peaks and two reduction peaks of Fe(III) were observed in a reversible process: Fe(III) Fe(II), and Fe(II) Fe(0). Interestingly, the redox reaction of Fe(III) solution using GPE remained constant even after 15 cycles. It is therefore evident that the GPE possesses some degree of stability. The potential use of the grafted polymer as a useful electrode material is therefore clearly evident.     

Electrochemical behaviour of mononuclear Fe(III) complexes as models for oxygenases: reactivity of Fe(II) species electrochemically formed in situ toward dioxygen

In this paper, we report the electrochemical study of a family of mononuclear Fe(III) complexes [Fe(BMPA)Cl(3)] 1, [Fe(MPBMPA)Cl(3)] 2, [Fe(PBMPA)Cl(2)]3 and [Fe(PABMPA)Cl(2)](ClO(4)) 4, where the ligand BMPA is bis-(2-pyridylmethyl)amine, and MPBMPA, PBMPA and PABMPA are the N-methylpropanoate, N-propanoate and N-propanamide BMPA-derivatives, respectively. It was possible to verify the influence of the different ligands on the redox properties of the complexes and from this to classify the complexes according to their Lewis acidity through the Fe(III)/Fe(II) redox process, resulting in the following decreasing order in CH(3)CN solution: 4> 2> 1> 3. The effect of the solvents CH(3)CN and DMSO on their electrochemical properties was also determined. Furthermore, we investigated the reactivity of the electrochemically-generated Fe(II) complexes toward dioxygen and of the Fe(III) complexes toward superoxide through cyclic voltammetry. All the complexes reacted with dioxygen and superoxide in DMSO solution. Redox processes attributed to oxygenated species were observed in a more cathodic potential than those of the original compounds. According to the data, the new species Fe(II)-O(2) converts itself to Fe(III)-O(2)(-), which presents a new redox wave attributed to the process Fe(III)-O(2)(-) + e(-) --> Fe(II)-O(2)(-). The same species Fe(III)-O(2)(-) is formed from the reaction of the Fe(III) form of the complexes and KO(2).     

Redox properties of NN′-X-phenylenebis(Y-salicyli-deneiminato)iron(II) complexes and reactivity of the corresponding iron(III) complexes towards catecholates

The electrochemical behaviour of a series of iron(II) complexes with the tetradentate ligand NN′-1,2-phenylenebis(salicylideneimine), [Fe(II)L], was studied in non-aqueous solvents. The redox properties of the complexes were related to the nature of the substituents in the aromatic rings. Attention was devoted to dioxygen reactivity of the complexes. The electrode activity of the catechol—[NN′-1,2-phenylenebis(salicylidene-iminato) iron(III)] system, [Fe(III)L(catH)], was also studied; the results gave evidence that both the electrochemical oxidation and the chemical oxidation by dioxygen of [Fe(II)L] in the presence of catechol lead to the complex [Fe(III)L(catH)].     

Aqueous solution speciation of Fe(III) complexes with dihydroxamate siderophores alcaligin and rhodotorulic acid and synthetic analogues using electrospray ionization mass spectrometry

Aqueous solutions of Fe3+ complexes of cyclic (alcaligin) and linear (rhodotorulic acid) dihydroxamate siderophores and synthetic linear eight-carbon-chain and two-carbon-chain dihydroxamic acids ([CH3N(OH)C=O)]2(CH2)n; H2Ln; n = 2 and 8) were investigated by electrospray ionization mass spectrometry (ESI-MS). Information was obtained relevant to the structure and the speciation of various Fe(III)-dihydroxamate complexes present in aqueous solution by (1) comparing different ionization techniques (ESI and FAB), (2) altering the experimental parameters (Fe3+/ligand ratio, pH, cone voltage), (3) using high-stability hexacoordinated Fe(III) siderophore complex mixtures (ferrioxamine B/ferrioxamine E) as a calibrant to quantify intrinsically neutral (H+ clustered or protonated) and intrinsically charged complexes, and (4) using mixed-metal complexes containing Fe3+, Ga3+, and Al3+. These results illustrate that for all dihydroxamic acid ligands investigated multiple tris- and bis-chelated mono- and di-Fe(III) species are present in relative concentrations that depend on the pH and Fe/L ratio.     

An electrochemical study of antineoplastic gallium, iron and ruthenium complexes with redox noninnocent alpha-N-heterocyclic chalcogensemicarbazones

The electrochemical properties of a series of alpha-N-heterocyclic chalcogensemicarbazones (HL), namely, thiosemicarbazones, selenosemicarbazones, and semicarbazones, and their gallium(III), iron(III), and ruthenium(III) complexes with the general formula [ML(2)][Y] (M = Ga, Fe or Ru; Y = PF(6)(-), NO(3)(-), or FeCl(4)(-)) were studied by cyclic voltammetry. The novel compounds were characterized by elemental analysis, a number of spectroscopic methods (NMR, UV-vis, IR), mass spectrometry and by X-ray crystallography. All complexes show several, mostly reversible, redox waves attributable to the reduction of the noninnocent chalcogensemicarbazone ligands at lower potentials (<-0.4 V vs NHE) than the metal-centered iron or ruthenium redox waves (>0 V vs NHE) in organic electrolyte solutions. The cyclic voltammograms of the gallium complexes display at least two consecutive reversible one-electron reduction waves. These reductions are shifted by approximately 0.6 V to lower potentials in the corresponding iron and ruthenium complexes. The electrochemical, chemical, and spectroscopic data indicate that the ligand-centered reduction takes place at the CH(3)CN double bond. Quantum chemical calculations on the geometric and electronic structures of 2-acetylpyridine (4)N,(4)N-dimethylthiosemicarbazone (HL(B)), the corresponding metal complexes [Ga(L(B))(2)](+) and [Fe(II)(L(B))(2)], and the one-electron reduction product for each of these species support the assignment of the reduction site and elucidate the observed order of the ligand-centered redox potentials, E(1/2)([Fe(II)(L)(2)]) < E(1/2)(HL) < E(1/2)([Ga(L)(2)](+)). The influence of water on the redox potentials of the complexes is reported and the physiological relevance of the electrochemical data for cytotoxicity as well as for ribonucleotide reductase inhibitory capacity are discussed.     

Separation and preconcentration of gallium(III), indium(III), and thallium(III) using new hydrazone-modified resin.

Ga(III), In(III) and Tl(III) ions in the presence of different sulfate salts have been successfully separated using 1-(3,4-dihydroxybenzaldehyde)-2-acetylpyridiniumchloride hydrazone (DAPCH) loaded on Duolite C20 in batch and column modes. The obtained modified resin as well as the metal complexes was characterized by elemental analysis and infrared spectra. The extraction isotherms were determined at different pH values. Ga(III) and In(III) are sorbed from aqueous solution at pH 2.5 - 3.0 while Tl(III) is sorbed at 2.0. The stripping of the adsorbed ions can be carried out using different concentrations of HCl as eluent. The saturation sorption capacities of Ga(III), In(III) and Tl(III) were 0.82, 0.96 and 0.44 mmol g(-1), where the preconcentration factors are 150, 150 and 100, respectively. The metal(III):Duolite C20-DAPCH ratio was 1:2 for Tl(III) and 1:1 for In(III) and Ga(III). The loaded resin can be regenerated for at least 50 cycles. The utility of the modified resin was tested in aqueous samples and the results show an RSD value of < 5% reflecting their accuracy and reproducibility.     

Detection of Al(III) and Ga(III) complexes with morin by electrospray ionization mass spectrometry.

The Al(III) and Ga(III) complexes formed by morin (M) in aqueous solution were investigated by means of electrospray ionization mass spectrometry (ESI-MS). In the full scan mass spectra, Al:M showed 1:2 and 2:3 stoichiometric ratios. When (S)-N-acetylserine methyl ester (Ser), as a partial mimic of the serine residue in silk, was added to Al:M and Ga:M complexes in aqueous solution, the mass spectra of Ser:Al:M showed 1:1:1 and 1:1:2 stoichiometric ratios. The patterns of the mass spectra of Ga:M and Ser:Ga:M complexes were similar to those for the corresponding Al(III) complexes. Calculated heats of formation of potential structures of the complexes, with and without bound water, were obtained using semiempirical PM3 calculations.     

Electrochemical characterization of the redox couple of Fe(III)/Fe(II) mediated by grafted polymer reference electrode (GPRE)

A grafted polymer reference electrode (GPRE) (polystyrene grafted with acrylonitrile as a monomer using gamma irradiation) was fabricated as a reference electrode using cyclic voltammetry (CV). The redox process of K₃Fe(CN)₆ during CV was studied. It was found that the redox current peaks of Fe(II)/Fe(III) in 0.1 M of KCl as supporting electrolyte is given the same oxidation–reduction current as in the Ag/AgCl reference electrode, indicating a good result of GPRE and, hence, it can be used for voltammetric analysis technique. The physical properties of GPRE include good hardness, insoluble in non-aqueous electrolytes (except dimethyl formamide and chloroform), and good stability at different solvents. In addition, the sensitivity under conditions of CV is significantly dependent on the scan rate (SR) and variation in concentration. At different SRs, redox peaks of K₃Fe(CN)₆ were observed in a reversible process: Fe(II)/Fe(III). Interestingly, the redox reaction of Fe(II)/Fe(III) solution using GCE versus GPRE remains constant even after 15 cyclings. It is therefore evident that the GPRE possesses some degree of stability. Also, the new reference electrode GPRE has improved the properties of electroanalysis of CV on the working electrode GCE in reliability with the relative standard deviation.     

Structural and electrochemical studies of novel bis(mu-methoxo)diiron complexes: observation of Fe(III)Fe(IV) and Fe(IV)Fe(IV) states resonating with phenoxyl radicals

Novel diiron complexes with an Fe2(mu-OMe)2 core were studied as models of the active site of nonheme iron-containing enzymes. X-ray crystal structures of the complexes showed the existence of two types of ligand folding-parallel and twisted-both of which have four virtually equivalent phenolato groups sticking out from the Fe2O2 rhombic plane. Cyclic voltammetry measurements revealed two or more distinct redox waves in a region of relatively high potential, in addition to known Fe(II)/Fe(III) redox waves in a region of lower potential. These new peaks were assigned to the high-valence state of iron atoms, that is, Fe(III)Fe(IV) and Fe(IV)Fe(IV), resonating with the phenoxyl radical(s). The split width of the redox waves ranged from 0.14 to 0.20 eV, which may be a measure of the electronic interaction of the phenolate groups through the Fe2(mu-OMe)2 core.     

Solution Properties of Azidokojatoiron(III) Complexes

The formation of iron(III) complexes with chelating azidokojate anions L⁻ was investigated in aqueous solutions as a function of the pH and the c(Fe³⁺):c(HL) molar ratio. Based on the stability constants, the distribution among the above complexes, [Fe(H₂O)₆]³⁺, and [Fe(H₂O)₅(OH)]²⁺ were calculated in solutions of various compositions. The complexes are redox stable in aqueous solutions both in the dark and in visible laboratory light. Properties of the investigated azidokojic acid and its iron(III) complexes are compared with those required for therapeutic applications as alternative iron chelators.     

Separation and determination of trace amounts of beryllium(II), aluminium(III) and chromium(III) with chromotrope 2C chelates by RP-HPLC

A reversed-phase high-performance liquid chromatographic separation and determination of beryllium(II), aluminium(III) and chromium(III) with chromotrope 2C chelates on a C18-bonded stationary phase is reported. Methanol-water (45:55 v/v) containing 6 x 10(-3)M tetra-n-butylammonium bromide (TBAB) and 2 x 10(-2)M acetate buffer solution (pH 6.0) as mobile phase and with spectrophotometric detection at 530 nm was applied. The method has high sensitivity, the detection limits being 0.2 ppb for beryllium(I), 1 ppb for aluminium(III) and 2 ppb for chromium(III). Under the optimum conditions, most other metal ions did not interfere, e.g. up to 2 mg of Hg(II), Sn(II, IV), Pb(II), Bi(III), Ag(I), Zn(II), Cd(II), Cu(II), 1.5 mg of Fe(II), Co(II), Ni(II), 1.2 mg of Ca(II), Mg(II), Sr(II), Ba(II), 1 mg of Ga(III), In(III), 0.5 mg of Fe(III), 1 mg of Ga(III), In(III), 0.5 mg of Fe(III), 0.4 mg of Th(IV), Zr(IV). The method can be applied to the simultaneous determination of trace amounts of beryllium(II), aluminium(III) and chromium(III), in water, rice, flour and human hair samples.     

The Effect of pH and Temperature on the Sorption of Zinc(II), Cadmium(II), and Aluminum(III) onto New Metal-Ligand Complexes of Sporopollenin

Sorption of metal ions from aqueous solution onto metal-ligand complexes of sporopollenin derivatives has been measured as a function of pH at several temperatures between 20 and 50°C. Novel metal-ligand exchange resins possessing oxime and carboxylic acid sidearm functionality were prepared through the reaction of diaminosporopollenin with dichloro-antiglyoxime and bromoacetic acid. The pH dependencies and sorption isotherms of various metal ions such as Zn(II), Cd(II), and Al(III) on the resin were investigated from aqueous solution. The sorption behavior of these metal-ligand complexes of sporopollenin derivatives and the possibilities of selectively removing and recovering heavy metals are explained on the basis of their chemical nature and complex properties and the results are interpreted in terms of the variations of pH.     

Adsorption behavior of Fe(II) and Fe(III) ions on thiourea cross-linked chitosan with Fe(III) as template

A new type of thiourea cross-linked chitosan with Fe(III) as template (TCCTS template) was synthesized. The adsorption of Fe(II) and Fe(III) on this TCCTS template was studied. The factors affecting adsorption such as pH and contact time were considered. The results showed that the optimum pH value for adsorption was pH = 5.0 and the adsorption equilibrium time was about 60 min. The adsorption isotherms and kinetics were investigated, and the equilibrium data agreed very well with the Langmuir model and the pseudo second-order model could describe adsorption process better than the pseudo first-order model. Results also showed that TCCTS template was a favourable adsorbent for Fe(II) and Fe(III) in aqueous solution.     

Spectrophotometric study of etodolac complexes with copper (II) and iron (III)

A rapid, simple, and selective method was developed for the determination of etodolac. The method depends on complexation of etodolac with copper (II) acetate and iron (III) chloride followed by extraction of complexes with dichloromethane and then measuring the extracted complexes spectrophotometrically at 684 and 385 nm in case of Cu (II) or Fe (III), respectively. Different factors affecting the reaction, such as pH, reagent concentration, and time, were studied. By use of Job's method of continuous variation, the molar ratio method, and elemental analysis, the stoichiometry of the reaction was found to be in the ratio of 1:2 and 1:3, metal:drug in the case of Cu (II) and Fe (III), respectively. The method obeys Beer's law in a concentration range of 2.00-9.00 and 0.50-2.00 mg/mL in case of Cu (II) and Fe (III), respectively. The stability of the complexes formed was also studied, and the reaction products were isolated for further investigation. The complexes have apparent molar absorptivities of about 32.14 +/- 0.97 and 168.32 +/- 1.12 for Cu (II) and Fe (III), respectively. The suggested procedures were successfully applied to the analysis of pure etodolac and its pharmaceutical formulations. The validity of the procedures was further ascertained by the method of standard additions, and the results were compared with other reported spectrophotometric methods and showed no significant difference in accuracy and precision.     

Investigation of complexes tannic acid and myricetin with Fe(III)

The pH dependence of the complexes was determined by both potentiometric and spectrophotometric studies. Stability constants and stoichiometries of the formed complexes were determined using slope ratio method. Fe(III) was formed complexes with tannic acid of various stoichiometries, which in the 1:1 molar ratio at pH<3, in the 2:1 molar ratio at pH 3-7 and in the 4:1 molar ratio at pH>7. Fe(III) was formed complexes with myricetin in the 1:2 molar ratio at pH 4 and 5 and in the 1:1 molar ratio at pH 6. Stability constant values were found to be 10(5) to 10(17) and 10(5) to 10(9) for Fe(III)-tannic acid complexes and Fe(III)-myricetin complexes. Both tannic acid and myricetin were possessed minimum affinities to Cu(II) and Zn(II). They had less affinity for Al(III) than for Fe(III).     

Complexation of a tripodal amine-catechol ligand tris((2,3-dihydroxybenzylamino)ethyl)amine towards Al(III), Ga(III), and In(III)

Abstract  

The complexation of a tripodal amine-catechol ligand tris((2,3-dihydroxybenzylamino)ethyl)amine (TRENCAT, L) with group-13 metal ions, viz., Al(III), Ga(III), and In(III), were investigated by means of potentiometric titrations and spectrophotometric measurements in an aqueous medium of 0.1 M KCl at 25 ± 1 °C. The ligand shows the potential to form various monomeric complexes of the types MLH₃, MLH₂, MLH, and ML. At low pH, the ligand is coordinated through three more acidic ortho-catecholic O-atoms to give MLH₃ species. With the rise in pH, the species MLH₃ releases three protons in steps from the meta-catecholic O-atoms to form MLH₂, MLH, and ML. The order of stability Ga(III) > Al(III) > In(III) for the species MLH₃ and MLH₂ is changed into Al(III) > Ga(III) > In(III) for the species MLH and ML. The coordination modes, binding ability, selectivity, and the change in stability order were explained with the help of experimental evidence, molecular modeling calculations, and available literature.