Electrocatalysis of Metalloporphyrins(Ⅷ)——Electrocatalytic Reduction of Molecular Oxygen with Water-Soluble Cobalt (Ⅱ) Tetrakis(4-Trimethyl Ammonium Phenyl) Porphyrin Catalyst

Reported here is the electrocatalytic reduction of molecular oxygen in the presence of water-soluble cobalt(Ⅱ) tetrakis(4-trimethyl ammonium phenyl) porphyrin (Co(Ⅱ)TTAPP) as catalyst in solutions of various pH values. The overpotential of molecular oxygen reduction is reduced by ca. 200-400 mV in acidic and neutral solutions compared with several decades of millivolts in alkaline solutions, indicating that Co(Ⅱ)TTAPP possesses much higher catalytic activity in acidic and neutral solutions than in alkaline. H2TTAPP in solutions of various pH exhibits no significant catalytic activity for oxygen reduction. The significant difference in the electrocatalytic activity of Co(Ⅱ)TTAPP from that of H2TTAPP for oxygen reduction indicates that the electrocatalytic activity of Co(Ⅱ)TTAPP should be attributed to the central cobalt atom (Co(Ⅱ)) coordinated by N4 internal ring in Co(Ⅱ)TTAPP. The total number of electrons involved in oxygen reduction electrocatalyzed by Co (Ⅱ)TTAPP is 2, and the product of suc     

Initial stages of copper electrodeposition from acidic sulfate solution in the presence of alklpyridinium hydrosulfate ionic liquids

The effect of two alklpyridinium hydrosulfate based ionic liquids(ILs)including N-butylpyridinium hydrogen sulfate(BpyHSO4)and N-hexylpyridinium hydrogen sulfate(HpyHSO4)as additives on the nucleation and growth of copper from acidic sulfate bath was investigated using cyclic voltammetry,chronoamperometric and scanning electron microscopy techniques.Results from cyclic voltammetry indicated that the two studied additives had a blocking effect on copper electrodeposition process and this effect initiated by HpyHSO4was more pronounced in comparison to BpyHSO4.Dimensionless chronoamperometric current-time transients for the electrodeposition of copper from the bath free of additives were in good accord with the theoretical transients for the limiting case of instantaneous three-dimensional nucleation with diffusion-controlled growth of the nuclei.However,the instantaneous nucleation mechanism observed in the additive-free bath was changed to a more progressive one when additives were present in the bath.Surface morphology analysis indicated that alklpyridinium hydrosulfate ILs can induce the formation of leveled and finer grained deposits by the adsorption of additive at the first stages of deposition process,leading to decrease of the nucleation and growth rate of nuclei.     

High pressure,a protocol to identify the weak dihydrogen bonds:experimental evidence of C–H···H–B interaction

Pressure, as a thermodynamic parameter, provides an appropriate method to detect weak intermolecular interactions. The C–H···H–B dihydrogen bond is so weak that the experimental evidence of this interaction is still limited. A combination of in situ high pressure Raman spectra and angle-dispersive X-ray diffraction(ADXRD) experiments was utilized to explore the dihydrogen bonds in dimethylamine borane(DMAB). Both Raman and ADXRD measurements suggested that the crystal structure of DMAB is stable in the pressure region from 1 atm(1 atm=1.01325×10~5 Pa) to 0.54 GPa. The red shift of CH stretching and CH_3 distortion modes gave strong evidence for the existence of C–H···H–B dihydrogen bonds. Further analysis of Raman spectra and Hirshfeld surface confirmed our proposal. This work provided a deeper understanding of dihydrogen bonds.And we wish that high pressure could be applied to identify other unconfirmed hydrogen or dihydrogen bond.     

SYNTHESIS OF POLYCATECHOL WITH ELECTROCHEMICAL ACTIVITY AND ITS PROPERTIES

The electrochemical polymerization of catechol on platinum has been carried out using repeated potential cyclingbetween-0.2 and 1.1 V (versus SCE). The electrolytic solution consisted of 0.2 mol dm~(-3) catechol, 0.5 mol dm~(-3) NaCl and0.1 mol dm~(-3) Na_2HPO_4 with pH 8.72. Catechol can not be polymerized at pH≥10.12. Polycatechol has an electrochemicalactivity at pH≤4. The anodic and cathodic peak potentials of polycatechol shift towards more negative values as the pH ofthe solution increases from 1 to 4. The electrochemical activity of polycatechol hardly changes in this pH region, but itdecreases slowly with time. This is caused by oxygen in air, which leads to an irreversible oxidation of polycatechol. Thisproperty is favorable for protecting metals from corrosion. Raman and FTIR spectra of polycatechol and catechol are quitedifferent. AFM images of polycatechol films provide evidence that the image of the oxidized state of polycatechol ismarkedly different from that of the reduced one. This difference is caused by doping and dedoping of polycatechol.     

Al(Ⅲ)-CTMAB增敏酸性降解荧光法测定土霉素

The fluorescence characteristics of acid degraded product of oxytetracycline with aluminium(Ⅲ) in micellar system has been studied.The experiment indicated that oxytetracycline reacts with hydrochloric acid and produces more strong fluorescent species.After CTMAB and aluminium(Ⅲ)are added in this species,its fluorescence intensity can be enhanced greatly in pH 7.20 Na2HPO4-KH2PO4 buffer solution.Based on this,a new fluorimetric method involving acidic degradation and enhancement by surfactant and aluminium(...     

Preparation of a pH-sensitive pantoprazole-imprinted polymer and evaluation of its drug-binding and -releasing properties

The aim of this work was to synthesize a pantoprazole-imprinted polymer(MIPs)and study its binding and release properties in an aqueous media.Methacrylic acid(MAA),methacrylamide(MAAM),hydroxyethyl methacrylate(HEMA),and 4-vinyl pyridine(4VP)were tested as functional monomers.Different solvents were also applied as polymerization media under heat or UV radiation.The optimized MIP was prepared in chloroform as a solvent,4-vinyl pyridine as a functional monomer,and ethylene glycole dimethacrylate(EGDMA)as a crosslinker monomer under UV irradiation.Binding and release properties of MIP were studied in comparison with a non-imprinted polymer(NIP)in aqueous media,at different pH values.The protective effect of polymer for drugs against acidic conditions was evaluated at pH 2.Results indicated that the MIP had superior binding properties compared to NIP for pantoprazole.The percentage of drug released from MIP was significantly less than from NIP at all pH values,which was attributed to the presence of imprinted cavities in the MIP matrix.MIP also had a stronger protective effect for pantoprazole in acidic media,in comparison with NIP.     

Studies on the Aromatic Dihalocarbonyl Ylides and Their Deoxygenation

The deoxygenation reaction of heptanones, cycloheptanone, cycloheptatrienone or substituted cycloheptatrienone with dihalo-carbene results in carbon monoxide and corresponding halides. The yield of CO produced by 2 , 4 , 6-triphenylcycloheptatrienone is 2.6-3.5 times as high as that produced by the saturated heptanones. The structures, energies, charge distributions, bond orders, and other relative parameters of the dihalocarbonyl glides were calculated by using the SCF-MNDO method. The obtained data reveal that the ylides from cycloheptatrienone have aromatic structure and are different from those produced from saturated cycloheptanone. The reactivities of the dihalocarbonyl ylides are discussed. It is proposed that this aromatic structure should be responsible for the high yield of CO from the reaction of cycloheptatrienone with dihalocarbene.     

The Effect of Gelatin on the Preparation of Silica Coated Iron Particles

A method is described for coating fine iron particles(～1μm) with a uniform silica layer,produced by the hydrolysis of tetraethyl orthosilicate.The presence of a small amount of gelatin on the surface of the iron particles facilitates this process.The X-ray photoelectron measurements indicated that the gelatin interacted with the surface of the iron particles by means of both nitrogen(in -NH2 groups) and oxygen(in -COOH groups) and then bound to the silica.The silica coating increases the resistance of the iron particles to oxidation on heating in air,which makes the temperature at which an observable oxidization occurs from 330 ℃ to 400 ℃ raised.     

An unusual isotopic fractionation of boron in synthetic calcium carbonate precipitated from seawater and saline water

Inorganic calcium carbonate precipitation from natural seawater and saline water at various pH values was carried out experimentally. The results show the clear positive relationships between boron concentration and δ11B of inorganic calcium carbonate with the pH of natural seawater and saline water. However, the variations of boron isotopic fractionation between inorganic calcite and seawater/saline water with pH are inconsistent with the hypothesis that B(OH)4- is the dominant spe-cies incorporated into the biogenic calcite structure. The isotopic fractionation factors α between synthetic calcium carbonate precipitate and parent solutions increase systematically as pH increases, from 0.9884 at pH 7.60 to 1.0072 at pH 8.60 for seawater and from 0.9826 at pH 7.60 to 1.0178 at pH 8.75 for saline water. An unusual boron isotopic fractionation factor of larger than 1 in synthetic calcium carbonate precipitated from seawater/saline water at higher pH is observed, which implies that a substantial amount of the isotopically heavier B(OH)3 species must be incorporated preferentially into synthetic inorganic carbonate. The results propose that the incorporation of B(OH)3 is attributed to the formation of Mg(OH)2 at higher pH of calcifying microenvironment during the synthetic calcium carbonate precipitation. The preliminary experiment of Mg(OH)2 precipitated from artificial seawater shows that heavier 11B is enriched in Mg(OH)2 precipitation, which suggests that isotopically heavier B(OH)3 species incorporated preferentially into Mg(OH)2 precipitation. This result cannot be applied to explain the boron isotopic fractionation of marine bio-carbonate because of the possibility that the unusual environment in this study appears in formation of marine bio-carbonate is infinitesimal. We, however, must pay more attention to this phenomenon observed in this study, which accidentally appears in especially natural environment.     

Adaptation of Cu/ZnO/Al_2O_3 to Temperature Change in Methanol Synthesis from CO_2 Hydrogenation

The induction behavior in CO2 hydrogenation was studied by varying the reaction temperature to investigate the adaptation of the Cu/ZnO/Al2O3 catalyst to the temperature change. The results indicated that a used catalyst had a tendency to keep the last running state in new reaction conditions for MeOH formation, and that this tendency was related to the difference in Cu/Cun+ ratio caused by CO2 and CO produced at different reaction temperatures. However, the reverse water-gas shift reaction (RWGS) induced at four temperatures was completely different from that of methanol synthesis. It implied that the two so-called competitive reactions in CO2+H2, RWGS and methanol synthesis, have different active centers.     

Electrooxidation Mechanism of Methanol at Pt-Ru Catalyst Modified GC Electrode in Electrolytes with Different pH Using Electrochemical and SERS Techniques

The electrochemical and in-situ surface-enhanced Raman spectroscopy （SERS） techniques were used to investigate the electrooxidation behavior of methanol in acidic, neutral and alkaline media at a Pt-Ru nanoparticle modified glassy carbon （Pt-Ru/GC） electrode. The results showed that methanol could be dissociated spontaneously at the Pt-Ru/GC electrode to produce a strongly adsorbed intermediate, CO. It was found that CO could be oxidized more easily in the alkaline medium than in the acidic and neutral media. The peak potential of methanol oxidation was shifted from 0.663 and 0.708 V in the acidic and neutral media to -0.030 V in the alkaline medium, which is due to that the adsorption strength of CO on the Pt surface in the alkaline medium is weaker than that in the acidic and neutral media. The final product of the methanol oxidation is CO2. However, in the alkaline medium, CO2 produced would form CO3^2- and HCO3^- resulting in the decrease in the alkaline concentration and then in the decrease in the performance of DMFC. Therefore, the performance of the alkaline DMFC is not Stable.     

Effects of the Liquid Conductivity on Pulsed High-voltage Discharge Modes in Water

Spark, stream and corona pulsed high-voltage discharges in water induced by the various initial conductivities have been examined in this paper. The discharge modes changed from spark to corona discharge with the liquid conductivity increasing. The apparent production of OH radical and quantum yield generated by spark discharge in distilled water were 11.57 gmol/L and 0.0978 photon/s, respectively. A preliminary study on acid fuchsine (AF) treatment indicated that higher AF removal efficiency has been achieved by spark discharge. The process of degradation showed that the oxidative effects through OH radical oxidation did not play an important role and did increase with the discharge mode changing to spark discharge.     

Adaptation o Cu／ZnO／Al2O3 to Temperature Change in Methanol Synthesis from CO2 Hydrogenation

The induction behavior in CO2 hydrogenation was studied by varying the reaction temperature to investigate the adaptation of the Cu/ZnO/Al2O3 catalyst to the temperature change,The results indicated that a used catalyst had a tendency to keep the last running state in new reaction conditions for MeOH formation,and that this tendency was related to the difference in Cu/Cu^n ration caused by CO2 and CO produced at different reaction temperatures,However,the reverse water-gas shift reaction (BWGS) induced at four temperatures was completely different from that of methanol synthesis,It implied that the two so-called competitive reactions in CO2 H2,RWGS and methanol synthesis,have different, active centers.     

Design, synthesis and characterization of a novel pH-sensitive hydrogel

A novel degradable pH-sensitive hydrogel with pendent carboxyl groups was designed and synthesized from ethylenediaminetetraacetic dianhydride （EDTAh） and butanediamine （BDA） with dicyclohexylcarbodiimide （DCC） as a condensating agent and BDA as a crosslinking agent. The obtained polymers were characterized by ^13C NMR, ^1H NMR and FTIR. The swelling experiments of the hydrogel in pH 3, 7, and 12 media indicated much higher swelling ratio in pH 12 media than in pH 3 and pH 7 media, exhibiting sound pH sensitivity. The pH sensitivity of this type of hydrogel may be regulated through controlling the type and the dose of the crosslinking agent.     

Influence of Sulfation on the Catalytic Activity of Ni-ZrO2 for NO Reduction with Propane in Excess Oxygen

Selective catalytic reduction （SCR） of nitric oxide with propane in excess oxygen was investigated on Ni-ZrO2 （NZ） and sulfated Ni-ZrO2 （SNZ）, prepared by coprecipitation from a mixture of nickel nitrate-zirconium oxychloride followed by modifying with （NH4）2SO4. It was found that sulfated Ni-ZrO2 catalyst showed higher activity for the SCR of NO with propane than that of Ni-ZrO2. The structural and surface properties of catalysts were studied by XRD, BET, SEM and FT-IR of pyridine adsorption. The experimental results indicated that the modification of （NH4）2SO4 resulted in the generation of strong BrOnsted and Lewis acid sites and promoted the dispersion of the Ni species, which could lead to higher NO conversion and propane efficiency in NO reduction.     

Effect of external surface of HZSM-5 zeolite on product distribution in the conversion of methanol to hydrocarbons

The external surface of HZSM-5 zeolite was passivated by liquid siliceous deposition and by acidic sites poisoning with lepidine, respectively. Then methanol-to-hydrocarbons （MTH） reaction was investigated over the above as-prepared catalysts and the dissoluble coke on these used catalysts was analyzed by GC-MS, to study the role of the external surface of HZSM-5 in the catalytic reaction. Comparison with the experi- mental results based on parent ZSM-5 showed that the product distribution of MTH reaction was obviously influenced by the external surface. Evidences were listed as follows： （1） the final product on parent HZSM-5 showed higher aromatic selectivity, lower olefin selectivity, lower ra- tio of C2/C3＋ aliphatics and higher ratio of C3/C4＋ aliphatics than the reaction mixture produced by the sole catalysis of acidic sites in HZSM-5 channel; （2） a little of pentamethylbenzene and hexamethylbenzene in the product on parent HZSM-5, was produced via multi-methylation of methylbenzene on the external surface. The above conclusion may also be suitable for MTH reaction over other zeolites with 10-ring channel.     

Production of single-walled carbon nanotubes from methane over Co-Mo/MgO nanocatalyst:A comparative study of fixed and fluidized bed reactors

In this study,the performances of fixed and fluidized bed reactors in the production of single-walled carbon nanotubes(SWNTs)have been investigated.In both reactors,single-walled carbon nanotubes were grown by catalytic chemical vapor decomposition(CCVD)of methane over Co-Mo/MgO nanocatalyst under two different operating conditions.The synthesized samples were characterized by TEM,TGA and Raman spectroscopy.It is found that the performance of a fluidized bed in the synthesis of carbon nanotubes is much better than that of a fixed bed.The quality of carbon nanotubes obtained from the fluidized bed was significantly higher than that from the fixed bed and the former one with the ID/IG ratio of 0.11 while the latter one with the ID/IG ratio of 0.71.Also,the yield of SWNTs in the fluidized bed was 92 wt%,while it was 78 wt%in the fixed bed.These advantages of fluidized bed reactors for the synthesis of carbon nanotubes can be attributed to more available space for the growth of carbon nanotubes and more uniform temperature and concentration profiles.     

P(VPBA-DMAEA) as a pH-sensitive nanovalve for mesoporous silica nanoparticles based controlled release

A pH-sensitive controlled release system was proposed in this work, which consists of mesoporous silica nanoparticles(MSNs) functionalized on the pore outlets with poly(4-vinylphenybronic acid-co-2-(dimethylamino)ethyl acrylate) [P(VPBA-DMAEA)]. Four kinds of P(VPBA-DMAEA)-gated MSNs were synthesized and applied for the p H-sensitive controlled release. The results showed that P(VPBADMAEA) can work as a p H-sensitive nanovalve. The release behavior of the hybrid nanoparticles could be adjusted by changing the mole ratio of VPBA and DMAEA. With the increasing of the mole ratio of VPBA,the leakage of the entrapped molecules in the pores of MSNs could be decreased at neutral and alkaline conditions. By altering the p H of buffer from 4.0 to 8.0, the valve could be switched ‘‘on' and ‘‘off'reversibly. In addition, cells viability results indicated that these P(VPBA-DMAEA)-gated MSNs had good biocompatibility. We believe that these MSNs based p H-sensitive controlled release system will provide a promising nanodevice for sited release of drug delivery.     

Study of spatial distribution for the active ingredient in ibuprofen tablet based on near-infrared micro-imaging technology

The NIR micro-images of ibuprofen tablets were collected in this research.Compare correlation imaging and principal component analysis(PC A) with histogram were applied to acquire the spatial distribution of ibuprofen granule.The result indicated that a similar distribution trend can be acquired by both of the two methods mentioned above;the information of PC2 results from ibuprofen mainly since the correlation coefficient between PC2 loading vector and the NIR spectrum of ibuprofen is 0.9930.The result of PCA indicated that the information of PC2 results from ibuprofen mainly for both the low and the high content of ibuprofen in the tablets.The correlation coefficient between the data of the two PC2 loading vectors of the low and the high content of ibuprofen in the tablets is 0.9998,which indicates that the result of PCA is stable and reliable.     

THE STUDY OF ADAPTABILITY OF Drepanopus bispinosus TO TEMPERATURE AND SALINITY IN THE ANTARCTIC BURTON LAKE

The tolerance to temperautre and salinity of a Calanoida copepod: Drepanopus bispinosus from the Burton Lake in the Vestfold Hills, Antarctica, was tested in each season. The results obtained show that the copepod has a marked physiological property of tolerance to low temperature and high salinity, and this property could be strengthened after winter. The response to different temperature and salinity of the copepod evidently expressed the tardy characteristics contrasted with seasons. This means that for a long term in early winter(lower temperature and higher salinity) the animal still has higher tolerance to lower salinity and higher temperature; and it is opposite in early summer. These physiological features are possibly caused by natural acclimatization in the lake. The experimental data were processed and plotted by computer. The correlation of animal's survival rate with the changes of temperature and salinity presented an approximately smooth surface of a three-degree elliptic sphere.