Long‐Range Chirality Recognition of a Polar Molecule on Au(111)

Chiral molecular self‐assemblies were usually achieved using short‐range intermolecular interactions, such as hydrogen‐, metal–organic, and covalent bonding. However, unavoidable surface defects, such as step edges, surface reconstructions, or site dislocations may limit the applicability of short‐range chirality recognition. Long‐range chirality recognition on surfaces would be an appealing but challenging strategy for chiral reservation across surface defects at long distances. Now, long‐range chirality recognition is presented between neighboring 3‐bromo‐naphthalen‐2‐ol (BNOL) stripes on an inert Au(111) surface across the herringbone reconstruction as investigated by STM and DFT calculations. The key to achieving such recognition is the herringbone reconstruction‐induced local dipole accumulation at the edges of the BNOL stripes. The neighboring stripes are then forced to adopt the same chirality to create the opposite edged dipoles and neutralize the neighbored dipole moments.     

Long-Range Chirality Recognition of a Polar Molecule on Au(111)

Chiral molecular self-assemblies were usually achieved using short-range intermolecular interactions, such as hydrogen-, metal–organic, and covalent bonding. However, unavoidable surface defects, such as step edges, surface reconstructions, or site dislocations may limit the applicability of short-range chirality recognition. Long-range chirality recognition on surfaces would be an appealing but challenging strategy for chiral reservation across surface defects at long distances. Now, long-range chirality recognition is presented between neighboring 3-bromo-naphthalen-2-ol (BNOL) stripes on an inert Au(111) surface across the herringbone reconstruction as investigated by STM and DFT calculations. The key to achieving such recognition is the herringbone reconstruction-induced local dipole accumulation at the edges of the BNOL stripes. The neighboring stripes are then forced to adopt the same chirality to create the opposite edged dipoles and neutralize the neighbored dipole moments.     

Surface structure and phase transition of K adsorption on Au(111): by ab initio atomistic thermodynamics

We studied the interactions between atomic potassium (K) and Au(111) at a range of coverage (i.e., Θ(K) = 0.11-0.5 monolayer (ML)) by ab initio atomic thermodynamics. For K on-surface adsorption, we found that K energetically favors the three-fold hollow sites (fcc or hcp), while the most significant surface rumpling was obtained at the atop sites. The incorporation of gold atoms in the adsorbate layer gradually becomes energetically favorable with increasing K coverage. We proposed a possible model with a stoichiometry of K(2)Au for the (2 × 2)-0.5 ML phase observed in lower energy electron diffraction (LEED): one K at atop site and the other K as well as one Au adatom at the second-nearest fcc/hcp and hcp/fcc, respectively. Clear theoretical evidences were given for the ionic interaction of K on Au surface. Additionally, phase transitions were predicted based on chemical potential equilibrium of K, largely in line with the earlier reported LEED observations: the clean surface → (√3 × √3)R30° → (2 × 2), and (2 × 2) → (√3 × √3)R30° reversely at an elevated temperature.     

Time-dependent organization and wettability of decanethiol self-assembled monolayer on Au(111) investigated with STM

A detailed study on the time-dependent organization of a decanethiol self-assembled monolayer (SAM) at a designed solution concentration onto a Au(111) surface has been performed with scanning tunneling microscopy (STM). The SAMs were prepared by immersing Au(111) into an ethanol solution containing 1 microM decanethiol with different immersion times. STM images revealed the formation process and adlayer structure of the SAMs. It was found that the molecules self-organized into adlayers from random separation to a well-defined structure. From 10 s, small domains with ordered molecular organization appeared, although random molecules could be observed on Au(111) at the very initial stage. At 30 s, the SAM consisted of uniform short stripes. Each stripe consisted of sets of decanethiol mainly containing eight molecules. With the immersion time increasing, the length of the stripes increased. At 5 min, the alkyl chains overlapped each other between the adjacent stripes, indicating the start of a stacked process. After immersing Au(111) in decanethiol solution for 3 days, a densely packed adlayer with a (radical 3 x radical 3)R30 degrees structure was observed. The formation process and structure of decanethiol SAMs are well related to sample preparation conditions. The wettability of the decanethiolate SAM-modified Au(111) surface was also investigated.     

Thiol with an unusual adsorption-desorption behavior: 6-mercaptopurine on Au(111)

A multitechnique study of 6-mercaptopurine (6MP) adsorption on Au(111) is presented. The molecule adsorbs on Au(111), originating short-range ordered domains and irregular nanosized aggregates with a total surface coverage by chemisorbed species smaller than those found for alkanethiol SAMs, as derived from scanning tunneling microscopy (STM) and electrochemical results. X-ray photoelectron spectroscopy (XPS) results show the presence of a thiolate bond, whereas density functional theory (DFT) data indicate strong chemisorption via a S-Au bond and additional binding to the surface via a N-Au bond. From DFT data, the positive charge on the Au topmost surface atoms is markedly smaller than that found for Au atoms in alkanethiolate SAMs. The adsorption of 6MP originates Au atom removal from step edges but no vacancy island formation at (111) terraces. The small coverage of Au islands after 6MP desorption strongly suggests the presence of only a small population of Au adatom-thiolate complexes. We propose that the absence of the Au-S interface reconstruction results from the lack of significant repulsive forces acting at the Au surface atoms.     

Density functional theory (DFT) investigation of the adsorption of the CH3OH/Au(100) system

The adsorption of methanol on flat Au (100) surface with different coverages (θ = 1.0, 0.5 and 0.25 monolayer (ML)) is studied using density functional theory. Among the three sites (top, bridge and hollow) and coverages investigated in the present work, no adsorption is stable for θ = 1.0 ML. The most energetically preferred site of adsorption for CH₃OH is found to be the hollow site for coverages of 0.25 ML and 0.50 ML. We also find that for all adsorption sites, an increase in CH₃OH coverage triggers a decrease in the adsorption energy. The geometric parameters, local density of states and work function changes are analysed in detail. The coadsorption of methoxy and hydrogen has also investigated. In addition, the dissociation of methanol on Au(100) has been studied, and an activation energy was found to be 1.72 eV. This result compare with existing data in the literature for Au(111) surface. Copyright © 2013 John Wiley & Sons, Ltd.     

Characterization and methanol electrooxidation studies of Pt(111)/Os surfaces prepared by spontaneous deposition

Catalytic activity of the Pt(111)/Os surface toward methanol electrooxidation was optimized by exploring a wide range of Os coverage. Various methods of surface analyses were used, including electroanalytical, STM, and XPS methods. The Pt(111) surface was decorated with nanosized Os islands by spontaneous deposition, and the Os coverage was controlled by changing the exposure time to the Os-containing electrolyte. The structure of Os deposits on Pt(111) was characterized and quantified by in situ STM and stripping voltammetry. We found that the optimal Os surface coverage of Pt(111) for methanol electrooxidation was 0.7 +/- 0.1 ML, close to 1.0 +/- 0.1 Os packing density. Apparently, the high osmium coverage Pt(111)/Os surface provides more of the necessary oxygen-containing species (e.g., Os-OH) for effective methanol electrooxidation than the Pt(111)/Os surfaces with lower Os coverage (vs e.g., Ru-OH). Supporting evidence for this conjecture comes from the CO electrooxidation data, which show that the onset potential for CO stripping is lowered from 0.53 to 0.45 V when the Os coverage is increased from 0.2 to 0.7 ML. However, the activity of Pt(111)/Os for methanol electrooxidation decreases when the Os coverage is higher than 0.7 +/- 0.1 ML, indicating that Pt sites uncovered by Os are necessary for sustaining significant methanol oxidation rates. Furthermore, osmium is inactive for methanol electrooxidation when the platinum substrate is absent: Os deposits on Au(111), a bulk Os ingot, and thick films of electrodeposited Os on Pt(111), all compare poorly to Pt(111)/Os. We conclude that a bifunctional mechanism applies to the methanol electrooxidation similarly to Pt(111)/Ru, although with fewer available Pt sites. Finally, the potential window for methanol electrooxidation on Pt(111)/Os was observed to shift positively versus Pt(111)/Ru. Because of the difference in the Os and Ru oxophilicity under electrochemical conditions, the Os deposit provides fewer oxygen-containing species, at least below 0.5 V vs RHE. Both higher coverage of Os than Ru and the higher potentials are required to provide a sufficient number of active oxygen-containing species for the effective removal of the site-blocking CO from the catalyst surface when the methanol electrooxidation process occurs.     

Mechanistic Insights into Selectivity Control for Heterogeneous Olefin Oxidation: Styrene Oxidation on Au(111)

We demonstrate that intermolecular interactions, controlled by both oxygen and styrene coverage, alter reaction selectivity for styrene oxidation on oxygen‐covered Au(111). Several partial oxidation products are formed—styrene oxide, acetophenone, benzoic acid, benzeneacetic acid, and phenylketene—in competition with combustion. The maximum ratio of the yields of styrene oxide to the total CO₂ produced is obtained for the maximum styrene coverage for the first two layers (0.28 ML) adsorbed on Au(111) precovered with 0.2 ML of O. Furthermore, our reactivity and infrared studies support a mechanism whereby styrene oxidation proceeds via two oxametallacycle intermediates which, under oxygen‐lean conditions, lead to the formation of styrene oxide, acetophenone, and phenylketene. Benzoate, identified on the basis of infrared reflection absorption spectroscopy, is converted into benzoic acid during temperature‐programmed reaction. These results demonstrate the ability to tune the epoxidation selectivity using reactant coverages and provide important mechanistic insight into styrene oxidation reactions.     

Theoretical study of the structure of self-assembled monolayers of short alkylthiolates on Au(111) and Ag(111): the role of induced substrate reconstruction and chain-chain interactions

We compare the stability of various structures of high coverage self-assembled monolayers (SAMs) of short alkylthiolates, S(CH(2))(n-1)CH(3) (= C(n)), on Ag(111) and Au(111). We employ: (i) the ab initio thermodynamics approach based on density functional theory (DFT) calculations, to compare the stability of SAMs of C(1) (with coverages Θ = 3/7 and 1/3) on both substrates, and (ii) a set of pairwise interatomic potentials derived from second-order M?ller-Plesset (MP2) perturbation theory calculations, to estimate the role of chain-chain (Ch-Ch) interactions in the structure and stability of SAMs of longer chain alkylthiolates. For C(1)/Ag(111) (C(1)/Au(111)) the SAM with Θ = 3/7 is more (less) stable than for Θ = 1/3 in a wide range of temperatures and pressures in line with experiments. In addition, for the molecular densities of SAMs corresponding to Θ = 3/7 and 1/3, the MP2-based Ch-Ch interaction potential also predicts the different chain orientations observed experimentally in SAMs of alkylthiolates on Ag(111) and Au(111). Thus, for short length alkylthiolates, a simple model based on first principles calculations that separately accounts for molecule-surface (M-S) and Ch-Ch interactions succeeds in predicting the main structural differences between the full coverage SAMs usually observed experimentally on Ag(111) and Au(111).     

第一性原理研究C在Fe(111)表面和次表面的积炭机理

使用密度泛函方法对C原子在Fe(111)表面吸附团聚和次表层的吸附扩散进行了研究。在炭覆盖度θ_C <1 ML时,C主要以孤立的原子态存在并导致表面重构;1 ML≤θ_C ≤2 ML,"mC₂+nC"为主要的吸附形式;θ_C≥2 ML时,复杂的吸附形态比如碳链和岛状碳团簇开始生成。这些复杂岛状碳团簇是Fe(111)表面石墨沉积或碳纳米管生长的成核中心。在次表层,C原子在八面体位稳定存在。C在表面的迁移能垒为0.45 eV,由表面迁移到次表面的的能垒为0.73 eV。虽然C₂团簇的生成是热力学有利的,但是C向次表层的迁移动力学上占优。     

Kinetics of CO oxidation on high-concentration phases of atomic oxygen on Pt(111)

Temperature-programmed reaction spectroscopy (TPRS) and direct, isothermal reaction-rate measurements were employed to investigate the oxidation of CO on Pt(111) covered with high concentrations of atomic oxygen. The TPRS results show that oxygen atoms chemisorbed on Pt(111) at coverages just above 0.25 ML (monolayers) are reactive toward coadsorbed CO, producing CO(2) at about 295 K. The uptake of CO on Pt(111) is found to decrease with increasing oxygen coverage beyond 0.25 ML and becomes immeasurable at a surface temperature of 100 K when Pt(111) is partially covered with Pt oxide domains at oxygen coverages above 1.5 ML. The rate of CO oxidation measured as a function of CO beam exposure to the surface exhibits a nearly linear increase toward a maximum for initial oxygen coverages between 0.25 and 0.50 ML and constant surface temperatures between 300 and 500 K. At a fixed CO incident flux, the time required to reach the maximum reaction rate increases as the initial oxygen coverage is increased to 0.50 ML. A time lag prior to the reaction-rate maximum is also observed when Pt oxide domains are present on the surface, but the reaction rate increases more slowly with CO exposure and much longer time lags are observed, indicating that the oxide phase is less reactive toward CO than are chemisorbed oxygen atoms on Pt(111). On the partially oxidized surface, the CO exposure needed to reach the rate maximum increases significantly with increases in both the initial oxygen coverage and the surface temperature. A kinetic model is developed that reproduces the qualitative dependence of the CO oxidation rate on the atomic oxygen coverage and the surface temperature. The model assumes that CO chemisorption and reaction occur only on regions of the surface covered by chemisorbed oxygen atoms and describes the CO chemisorption probability as a decreasing function of the atomic oxygen coverage in the chemisorbed phase. The model also takes into account the migration of oxygen atoms from oxide domains to domains with chemisorbed oxygen atoms. According to the model, the reaction rate initially increases with the CO exposure because the rate of CO chemisorption is enhanced as the coverage of chemisorbed oxygen atoms decreases during reaction. Longer rate delays are predicted for the partially oxidized surface because oxygen migration from the oxide phase maintains high oxygen coverages in the coexisting chemisorbed oxygen phase that hinder CO chemisorption. It is shown that the time evolution of the CO oxidation rate is determined by the relative rates of CO chemisorption and oxygen migration, R(ad) and R(m), respectively, with an increase in the relative rate of oxygen migration acting to inhibit the reaction. We find that the time lag in the reaction rate increases nearly exponentially with the initial oxygen coverage [O](i) (tot) when [O](i) (tot) exceeds a critical value, which is defined as the coverage above which R(ad)R(m) is less than unity at fixed CO incident flux and surface temperature. These results demonstrate that the kinetics for CO oxidation on oxidized Pt(111) is governed by the sensitivity of CO binding and chemisorption on the atomic oxygen coverage and the distribution of surface oxygen phases.     

Electrochemical self-assembly of alkanethiolate molecules on Ni(111) and polycrystalline Ni surfaces

In this work, the electrochemical formation of alkanethiolate self-assembled monolayers (SAMs) on Ni(111) and polycrystalline Ni surfaces from alkanethiol-containing aqueous 1 M NaOH solutions was studied by combining Auger electron spectroscopy (AES), X-ray photoelectron spectroscopy (XPS), electrochemical techniques, and density functional theory (DFT) calculations. Results show that alkanethiolates adsorb on Ni concurrent with NiO electroreduction. The resulting surface coverage depends on the applied potential and hydrocarbon chain length. Electrochemical and XPS data reveal that alkanethiolate electroadsorption at room temperature takes place without S-C bond scission, in contrast to previous results from gas-phase adsorption. A complete and dense monolayer, which is stable even at very high cathodic potentials (-1.5 V vs SCE), is formed for dodecanethiol. DFT calculations show that the greater stability against electrodesorption found for alkanethiolate SAMs on Ni, with respect to SAMs on Au, is somewhat related to the larger alkanethiolate adsorption energy but is mainly due to the larger barrier to interfacial electron transfer present in alkanethiolate-covered Ni. A direct consequence of this work is the possibility of using electrochemical self-assembly as a straightforward route to build stable SAMs of long-chained alkanethiolates on Ni surfaces at room temperature.     

Hierarchical chiral framework based on a rigid adamantane tripod on Au(111)

We have investigated the tripod-shaped bromo adamantane trithiol (BATT) molecule on Au(111) using scanning tunneling microscopy (STM) at 4.7 K. Adsorption of BATT leads to formation of highly ordered self-assembled monolayers (SAMs) with three-point contacts on Au(111). The structure of these SAMs has been found to have a two-tiered hierarchical chiral organization. The self-assembly of achiral monomers produces chiral trimers, which then act as the building blocks for chiral hexagonal supermolecules. SAMs begin to form from the racemic mixture of assembled molecules in ribbon-shaped islands, followed by the transformation to enantiomeric domains when SAM layers develop two-dimensionally across hcp domains. Such a chiral phase transition at the two-dimensional domain can arise from a subtle balance between molecule-substrate and intermolecular interactions. Two structural factors, the S atom (stabilization) and the methylene groups (chirality) located just above the S atom, induce the chiral ordering of BATT on Au(111).     

Coverage effects and the nature of the metal-sulfur bond in S/Au(111): high-resolution photoemission and density-functional studies

The bonding of sulfur to surfaces of gold is an important subject in several areas of chemistry, physics, and materials science. Synchrotron-based high-resolution photoemission and first-principles density-functional (DF) slab calculations were used to study the interaction of sulfur with a well-defined Au(111) surface and polycrystalline gold. Our experimental and theoretical results show a complex behavior for the sulfur/Au(111) interface as a function of coverage and temperature. At small sulfur coverages, the adsorption of S on fcc hollow sites of the gold substrate is energetically more favorable than adsorption on bridge or a-top sites. Under these conditions, S behaves as a weak electron acceptor but substantially reduces the density-of-states that gold exhibits near the Fermi edge. As the sulfur coverage increases, there is a weakening of the Au-S bonds (with a simultaneous reduction in the Au --> S charge transfer and a modification in the S sp hybridization) that facilitates changes in adsorption site and eventually leads to S-S bonding. At sulfur coverages above 0.4 ML, S(2) and not atomic S is the more stable species on the gold surface. Formation of S(n)(n > 2) species occurs at sulfur coverages higher than a monolayer. Very similar trends were observed for the adsorption of sulfur on polycrystalline surfaces of gold. The S atoms bonded to Au(111) display a unique mobility/reactivity not seen on surfaces of early or late transition metals.     

Chlorine adsorption on Au(111): chlorine overlayer or surface chloride?

We report the first scanning tunneling microscope (STM) investigation, combined with density functional theory calculations, to resolve controversy regarding the bonding and structure of chlorine adsorbed on Au(111). STM experiments are carried out at 120 K to overcome instability caused by mobile species upon chlorine adsorption at room temperature. Chlorine adsorption initially lifts the herringbone reconstruction. At low coverages (<0.33 ML), chlorine binds to the top of Au(111)-(1 x 1) surface and leads to formation of an overlayer with (square root(3) x square root(3))R30 degree structure at 0.33 ML. At higher coverages, packing chlorine into an overlayer structure is no longer favored. Gold atoms incorporate into a complex superlattice of a Au-Cl surface compound.     

In-situ scanning tunneling microscopy of carbon monoxide adsorbed on Au(111) electrode

In-situ scanning tunneling microscopy (STM) coupled with cyclic voltammetry was used to examine the adsorption of carbon monoxide (CO) molecules on an ordered Au(111) electrode in 0.1 M HClO4. Molecular resolution STM revealed the formation of several commensurate CO adlattices, but the (9 x radical 3) structure eventually prevailed with time. The CO adlayer was completely electrooxidized to CO2 at 0.9 V versus RHE in CO-free 0.1 M HClO(4), as indicated by a broad and irreversible anodic peak which appeared at this potential in a positive potential sweep from 0.05 to 1.6 V. A maximal coverage of 0.3 was estimated for CO admolecules from the amount of charge involved in this feature. Real-time in-situ STM imaging allowed direct visualization of the adsorption process of CO on Au(111) at 0.1 V, showing the lifting of (radical 3 x 22) reconstruction of Au(111) and the formation of ordered CO adlattices. The (9 x radical 3) structure observed in CO-saturated perchloric acid has a coverage of 0.28, which is approximately equal to that determined from coulometry. Switching the potential from 0.1 to -0.1 V restored the reconstructed Au(111) with no change in the (9 x radical 3)-CO adlattice. However, the reconstructed Au(111) featured a pairwise corrugation pattern with two nearest pairs separated by 74 +/- 1 A, corresponding to a 14% increase from the ideal value of 65.6 A known for the ( radical 3 x 22) reconstruction. Molecular resolution STM further revealed that protrusions resulting from CO admolecules in the (9 x radical 3) structure exhibited distinctly different corrugation heights, suggesting that the CO molecules resided at different sites on Au(111). This ordered structure predominated in the potential range between 0.1 and 0.7 V; however, it was converted into new structures of (7 x radical 7) and ( radical 43 x 2 radical 13) on the unreconstructed Au(111) when the potential was held at 0.8 V for ca. 60 min. The coverage of CO adlayer decreased accordingly from 0.28 to 0.13 before it was completely removed from the Au(111) surface at more positive potentials.     

Adsorption kinetics of 1-alkanethiols on hydrogenated Ge(111)

We have investigated the liquid-phase self-assembly of 1-alkanethiols (HS(CH2)n-1CH3, n = 8, 16, and 18) on hydrogenated Ge(111), using attenuated total reflection Fourier transform infrared spectroscopy as well as water contact angle measurements. The infrared absorbance of C-H stretching modes of alkanethiolates on Ge, in conjunction with water contact angle measurements, demonstrates that the final packing density is a function of alkanethiol concentration in 2-propanol and its chain length. High concentration and long alkyl chain increase the steady-state surface coverage of alkanethiolates. A critical chain length exists between n = 8 and 16, above which the adsorption kinetics is comparable for all long alkyl chain 1-alkanethiols. The steady-state coverage of hexadecanethiolates, representing long-chain alkanethiolates, reaches a maximum at approximately 5.9 x 10(14) hexadecanethiolates/cm2 in 1 M solution. The characteristic time constant to reach a steady state also decreases with increasing chain length. This chain length dependence is attributed to the attractive chain-to-chain interaction in long-alkyl-chain self-assembled monolayers, which reduces the desorption-to-adsorption rate ratio (kd/ka). We also report the adsorption and desorption rate constants (ka and kd) of 1-hexadecanethiol on hydrogenated Ge(111) at room temperature. The alkanethiol adsorption is a two-step process following a first-order Langmuir isotherm: (1) fast adsorption with ka = 2.4 +/- 0.2 cm3/(mol s) and kd = (8.2 +/- 0.5) x 10(-6)(s-1); (2) slow adsorption with ka = 0.8 +/- 0.5 cm3/(mol s) and kd = (3 +/- 2) x 10(-6) s(-1).     

New insight into the electrochemical desorption of alkanethiol SAMs on gold

A combination of Polarization Modulation Infrared Reflection Absorption Spectroscopy (PMIRRAS) under electrochemical control, Electrochemical Scanning Tunneling Microscopy (ECSTM) and Molecular Dynamics (MD) simulations has been used to shed light on the reductive desorption process of dodecanethiol (C12) and octadecanethiol (C18) SAMs on gold in aqueous electrolytes. Experimental PMIRRAS, ECSTM and MD simulations data for C12 desorption are consistent with formation of randomly distributed micellar aggregates stabilized by Na(+) ions, coexisting with a lying-down phase of molecules. The analysis of pit and Au island coverage before and after desorption is consistent with the thiolate-Au adatoms models. On the other hand, PMIRRAS and MD data for C18 indicate that the desorbed alkanethiolates adopt a Na(+) ion-stabilized bilayer of interdigitated alkanethiolates, with no evidence of lying down molecules. MD simulations also show that both the degree of order and tilt angle of the desorbed alkanethiolates change with the surface charge on the metal, going from bilayers to micelles. These results demonstrate the complexity of the alkanethiol desorption in the presence of water and the fact that chain length and counterions play a key role in a complex structure.     

Unravelling the origin of the high-catalytic activity of supported Au: a density-functional theory-based interpretation

Using first principles DF calculations we have studied the structural and catalytic properties of Au supported on TiOx-Mo(112) films. Our theoretical models are consistent with an initial (8 x 2) Mo(112)-Ti2O3 pattern which after Au deposition gives rise to ordered Au films that completely wet the surface. The oxidation of CO on model surfaces at coverage 1, 4/3, and 5/2 ML has been analyzed. The oxidation proceeds through a peroxo-like complex in which molecular oxygen is simultaneously bound to the CO and the surface. The energy barrier computed for a Au coverage of 4/3 ML is found significantly lower in agreement with the unusual high activity observed for this catalyst. The detailed analysis of the geometry and electronic structure provides a fundamental understanding of the reaction.     

Molecular orientations and interfacial structure of C60 on Pt(111)

Molecular orientations and assembled structures of C(60) molecules on Pt(111) have been characterized by low-temperature scanning tunneling microscopy for coverage between 0.1 ML and 1.5 ML. At room temperature, C(60) molecules preferentially decorate the steps and nucleate into single layer islands (SLIs) with hexagonal close-packed structures upon increasing coverage. C(60) islands comprise two differently oriented C(60)∕Pt(111)-(√13?×?√13) R13.9° phases, in which five types of molecular orientation of C(60) carbon cage configurations are clearly identified by the high-resolution scanning tunneling microscopy image. Further annealing treatment leads to more uniform molecular orientation without apparent aggregation of C(60) SLIs. As coverage increases above 1 ML, domains corresponding to (2√3?×?2√3) R30° superstructure appear. To explain the above transformation, an interfacial reconstruction model is proposed according to the detailed study of the molecular adsorption structures in different domains.