Fluorescence Enhancement of the Silver Nanoparticales – Curcumin - Cetyltrimethylammonium Bromide-nucleic Acids System and its Analytical Application

It is found that silver nanoparticles (AgNPs) can further enhance the fluorescence intensity of curcumin (CU) - cetyltrimethylammonium bromide (CTAB) – nucleic acids and improve its anti-photobleaching activity. Under optimum conditions, the enhanced fluorescence intensity is proportion to the concentration of nucleic acids in the range of 2.0 × 10⁻⁸–1.0 × 10⁻⁶ g mL⁻¹ for fish sperm DNA (fsDNA), 2.0 × 10⁻⁸–1.0 × 10⁻⁶ g mL⁻¹ for calf thymus DNA (ctDNA), 1.0 × 10⁻⁸–1.0 × 10⁻⁶ g mL⁻¹ for yeast RNA (yRNA), and their detection limits (S/N = 3) are 8.0 ng mL⁻¹, 10.5 ng mL⁻¹ and 5.8 ng mL⁻¹, respectively. This method is used for determining the concentration of DNA in actual sample with satisfactory results. The interaction mechanism is also studied.     

Fluorescence Quenching Reaction of Polyvinylpyrrolidone-Eosin Y System for the Determination of Polyvinylpyrrolidone

In pH 1.8 ∼ 2.8 weak acid medium, polyvinylpyrrolidone (PVP) and Eosin Y reacted to form complex that could result in Eosin Y (EY) fluorescence quenching. The maximum quenching wavelength was at 542 nm. The fluorescence quenching (ΔF) was proportional to the concentration of polyvinylpyrrolidone in a certain range. The linear range, the correlation coefficient and the detection limit were 0.33 ∼ 2.0 μg•mL⁻¹, 0.9994 and 99.6 ng•mL⁻¹, respectively. The influences of the coexistence substances were tested and the results showed that the method had good selectivity. Therefore, a new method based on fluorescence quenching of eosin Y by PVP for the determination of trace PVP was developed. The method was sensitive, simple and rapid, which was applied to the determination of trace PVP in the beer with satisfactory results. The reaction mechanism was also discussed.     

Spectrofluorimetric Method for Determination and Validation of Cefixime in Pharmaceutical Preparations Through Derivatization with 2-Cyanoacetamide

A simple, sensitive and accurate method has been developed for spectrofluorimetric determination of cefixime in pure form and pharmaceutical preparations. The method is based on the reaction of cefixime with 2-cyanoacetamide in the presence of 21% ammonia at 100 °C. The fluorescent reaction product showed maximum fluorescence intensity at λ 378 nm after excitation at λ 330 nm. The factors affecting the derivatization reaction were carefully studied and optimized. The fluorescence intensity versus concentration plot was rectilinear over the range of 0.02 to 4 μg mL⁻¹ with correlation coefficient of 0.99036. The limit of detection (LOD) and limit of quantification (LOQ) was found to be 2.95 ng mL⁻¹ and 9.84 ng mL⁻¹, respectively. The proposed method was validated statistically and through recovery studies. The method was successfully applied for the determination of cefixime in pure and dosage form with percent recoveries from 98.117% to 100.38%. The results obtained from the proposed method have been compared with the official HPLC method and good agreement was found between them.     

Spectrofluorimetric Protocol for Ceftriaxone in Commercial Formulation and Human Plasma After Condensation with Formaldehyde and Ethyl Acetoacetate

A new spectrofluorimetric method has been developed and validated for the quantification of ceftriaxone in bulk powder, pharmaceutical formulations and spiked human plasma. The developed method is reproducible, accurate, sensitive and cost effective. In this method, ceftriaxone was converted into a fluorescent compound by reacting with 0.8 M ethyl acetoacetate and 25% formaldehyde in a buffered medium (pH = 4.2) at 90 °C. The excitation and emission wavelengths of the fluorescent reaction product are 316 nm and 388 nm respectively. Optimization of the experimental conditions affecting the condensation reaction were carefully carried out and the optimum experimental conditions were incorporated in the procedure. The developed method has a broad linear range (0.2–20 μg mL⁻¹) with a correlation coefficient of 0.9992. The limit of detection (LOD) and limit of quantification (LOQ) was found to be 1.94 × 10⁻² μg mL⁻¹ and 6.47 × 10⁻² μg mL⁻¹ respectively. The common excipients and co-administered drugs were investigated for their interferences effect in the assay. The developed method was validated statistically through recovery studies and successfully applied to ceftriaxone determination in bulk powder, pharmaceutical formulations and spiked human plasma samples. The percent recoveries were found to be in the range of 99.04–100.26% for bulk powder, 98.88–99.92% for pharmaceutical formulations and 94.22–98.48% for spiked human plasma. The results were verified by comparing with reference literature HPLC method and were found in good agreement.     

Stability-Indicating Spectrofluorimetric Method for the Assay of Ziprasidone in Capsules

A simple, rapid and highly sensitive spectrofluorimetric method was developed for determination of ziprasidone hydrochloride (ZPS) in capsules. The method is based on measuring the native fluorescence of ZPS in acetate buffer of pH 4.5 at 398 nm after excitation at 315 nm. The fluorescence-concentration plot was rectilinear over the range of 0.05–0.80 μg mL⁻¹ with a lower detection limit (LOD) of 6.0 ng mL⁻¹ and quantification limit (LOQ) of 20.0 ng mL⁻¹. The method was fully validated and successfully applied to the determination of ZPS in its capsules with average percentage recovery of 99.7 ± 1.4. The method was extended to stability study of ZPS. The drug was exposed to acidic, alkaline, oxidative and photolytic degradation according to ICH guidelines. Moreover, the method was utilized to investigate the kinetics of the alkaline, acidic and oxidative degradation of the drug. A proposal for the degradation pathways was postulated.     

Study of Enhanced Chemiluminescence of Diperiodatocuprate (III) on 1,10-Phenanthroline/Hydrogen Peroxide/Cetyltrimethylammonium Bromide System

In the paper, a chemiluminescence (CL) system was developed based on the catalytical effect of diperiodatocuprate (III) (DPC) on the 1,10-phenanthroline (phen)/hydrogen peroxide (H₂O₂) in the presence of cetyltrimethylammonium bromide (CTAB). The effects of experimental conditions were investigated. Meanwhile the increase of CL intensity of the DPC/phen/H₂O₂/CTAB system is proportional to the concentration of phen in the range of low concentration. The linear range of the calibration curve is 5.0 × 10⁻⁹–1.0 × 10⁻⁶ mol L⁻¹, and the corresponding detection limit is 1.9 × 10⁻⁹ mol L⁻¹. The effects of phenolic compounds (PCs) on the system were investigated. Hydroquinone was used as an example to investigate the application of the CL system to the determination of PCs. The quenched CL intensity is linearly related to the logarithm of concentration of hydroquinone. The linear range of the calibration curve is 2.5 × 10⁻⁹–1.0 × 10⁻⁵ g mL⁻¹, and the corresponding detection limit is 1.8 × 10⁻⁹ g mL⁻¹. This phen and hydroquinone can be synchronously determined. The method was applied to the determination of hydroquinone in water samples and the recoveries were from 92% to 106%.     

Application of Functionalized ZnSe Nanoparticles to Determinate Heavy Metal Ions

In this paper, ZnSe nanoparticles, which were modified with mercaptoacetic acid (MAA), worked as novel fluorescence sensors for the quantitative determination of copper(II) and nickel(II). Under the optimal conditions, the fluorescence intensities of functionalized ZnSe nanoparticles were quenched by the addtion of copper(II) or nickel(II) ions, there were linear relationships between the relative fluorescence intensity (logF₀/F) and the concentration in the range of 140–2,000 μg/L for copper(II) (R = 0.9973) and 30–1,000 μg/L for nickel(II) (R = 0.9992), the limits of detection were 50 μg/L and 5 μg/L, respectively.     

One-step aqueous synthesis of CdS nanoparticles as a novel fluorescence probe for the ultrasensitive detection of DNA

One-step aqueous synthesis of CdS nanoparticles as a novel fluorescence probe for sensitive and selective determination of DNA with synchronous fluorescence spectrometric method has been developed. Different from the traditional organometallic route, in which toxic precursors or solvents might be used, the wet chemical approach demonstrated in this paper is superior in terms of simplicity, using of nontoxic materials, mild synthetic condition and good reproducibility. When Δλ=255 nm, maximum synchronous fluorescence is produced at 264 nm, the synchronous fluorescence intensity of the composite nanoparticles is significantly decreased in the presence of trace DNA at PH 0.91. Under optimal conditions, the linear ranges of the calibration curves are 0.08-30.0 μg mL⁻¹ for ctDNA and 0.05-35.0 μg mL⁻¹ for hsDNA, respectively. The detection limits are 1.5 ng mL⁻¹ for ctDNA and 2.2 ng mL⁻¹ for hsDNA, respectively. Furthermore, the method is successfully applied to the quantification of DNA in synthetic samples. The results show that this proposed method is stable, sensitive and practical for the determination of trace DNA.     

Second-derivative Synchronous Fluorometric Method for the Simultaneous Determination of Cinnarizine and Domperidone in Pharmaceutical Preparations. Application to Biological Fluids

A rapid, simple and highly sensitive second derivative synchronous fluorometric method has been developed for the simultaneous analysis of binary mixture of cinnarizine (CN) and domperidone (DOM). The method is based upon measurement of the native fluorescence of these drugs at Δλ = 80 nm in aqueous methanol (50% V/V). The different experimental parameters affecting the native fluorescence of the studied drugs were carefully studied and optimized. The fluorescence-concentration plots were rectilinear over the range of 0.1 to 1.3 μg mL⁻¹ and 0.1–3.0 μg mL⁻¹ for CN and DOM, respectively with lower detection limits of 0.017 and 5.77 × 10⁻³ μg mL⁻¹ and quantification limits of 0.058 and 0.02 μg mL⁻¹ for CN and DOM. The proposed method was successfully applied for the determination of the studied compounds in synthetic mixtures and in commercial tablets. The results obtained were in good agreement with those obtained with reference methods. The high sensitivity attained by the synchronous fluorometric method allowed the determination of CN in real and spiked human plasma. The mean % recoveries in case of spiked human plasma (n = 3) were 96.39 ± 1.18 while that in real human plasma (n = 3) was 104.67 ± 4.16.     

Spectrofluorimetric Determination of 3-hidroxy-2-naphthoic Acid by Use of Its Ternary Complex with Zirconium (IV) and Beta-Cyclodextrin: Application to Determination in River Water

A spectrofluorimetric method has been developed for the determination of 3-hydroxy-2-naphthoic acid (3H2NA) by formation of a ternary complex with zirconium (IV) and β-cyclodextrin (β-CD). It has been observed that the fluorescence intensity of 3H2NA is greatly enhanced when the ternary complex is formed and is accompanied with shifts in the excitation and emission wavelengths. The conditions for the formation of the ternary complex have been optimized and the stoichiometry has been calculated, resulting a 1:2:1 complex (3H2NA:Zr: β-CD). The linear range was 20–2000 ng mL⁻¹ and the detection and quantification limits calculated were 17 and 58 ng mL⁻¹, respectively. The proposed method was applied to the determination of 3H2NA in river water. To eliminate interferences an off-line solid phase extraction (SPE) procedure using C18 cartridges was used. The extraction procedure was optimized and good recoveries were obtained (around 100%) with relative standard deviations (RSDs) of less than 5%.     

Synthesis of Functionalized ZnSe Nanoparticles and Their Applications in the Determination of Bovine Serum Albumin

Luminescent quantum dots (QDs)-semiconductor nanocrystals were promising alternative to organic dyes for fluorescence-based applications. In this paper, we developed procedures to use mercaptoacetic acid (MAA) to modify ZnSe nanoparticles and made the nanoparticles to be soluble for the quantitative and selective determination of bovine serum albumin (BSA). Maximum fluorescence intensity was produced at pH 7.0, with excitation and emission wavelengths at 242 and 348 nm, respectively. Under optimal conditions, the straight line equation: ^△ F = 0.38 + 0.34 C (μg/ml) was found between the relative fluorescence intensity and the concentration of BSA in the range of 9.6–124.8 μg/ml, and the limit of detection was 2 μg/ml.     

Determination of L-tyrosine Based on Luminescence Quenching of Mn-Doped ZnSe Quantum Dots in Enzyme Catalysis System

In this paper, we attempted to develop a novel application of Mn-doped ZnSe quantum dots (Mn: ZnSe d-dots) as probes to detect L-tyrosine (L-Tyr). The bio-conjugates of horseradish peroxidase (HRP)-conjugated Mn: ZnSe d-dots were used in the enzyme catalyzed reaction of L-Tyr with H₂O_2. Compared with traditional CdTe QDs, Mn: ZnSe d-dots have better biocompatibility and less negative impact on enzyme catalyzed system. In HRP-conjugated Mn: ZnSe-L-Tyr-H₂O₂ system, electron transfer occurred between Mn: ZnSe d-dots and HRP. It resulted in the luminescence quenching of the Mn: ZnSe d-dots., which can be used to detect L-Tyr. The coupling of efficient quenching of Mn: ZnSe d-dots photoluminescence (PL) and the effective enzyme-catalysis can afford a simple and sensitive method for L-Tyr detection. The Mn: ZnSe d-dots-enzyme catalyzed system displays great potential in the development of enzyme-based biosensing systems for various analytes.     

Fluorescence and electrochemical recognition of nucleosides and DNA by a novel luminescent bioprobe Eu(III)-TNB

The luminescence arising from lanthanide cations offers several advantages over organic fluorescent molecules: sharp, distinctive emission bands allow for easy resolution between multiple lanthanide signals; long emission lifetimes (μs –ms) make them excellent candidates for time-resolved measurements; and high resistance to photo bleaching allow for long or repeated experiments. A method is presented for determination of nucleosides using the effect of enhancement of fluorescence of the easily accessible europium(III)-TNB in presence of different nucleosides. The latter coordinates to Eu(III) -TNB and enhances its luminescence intensity as a result of the displacement of water from the inner coordination sphere of the central metal. A similar method for the determination of DNA based on the quenching of Eu(III)-TNB has been established. The interaction of Eu(III)-4,4,4 trifluoro-1-(2-naphthyl)1,3-butanedione (TNB) complex with nucleosides (NS) (guanosine, adenosine, cytidine , inosine) and DNA has been studied using normal and time-resolved luminescence techniques. Binding constants were determined at 293 K, 298 K, 303 K, 308 K and 313 K by using Benesi-Hildebrand equation. A thermodynamic analysis showed that the reaction is spontaneous with ΔG being negative. The enthalpy ΔH and the entropy ΔS of reactions were all determined. The formation of binary and ternary complexes of Eu (III) with nucleosides and TNB has been studied potentiometrically at (25.0 ± 0.1) °C and ionic strength I = 0.1 mol.dm⁻³ (KNO₃) . The formation of the 1:1 binary and 1:1:1 ternary complexes are inferred from the corresponding titration curves. Initial estimates of the formation constants of the resulting species and the protonation constants of the different ligands used have been refined with the HYPERQUAD computer program. Electrochemical investigations for the systems under investigations have been carried out using cyclic voltammetry (CV), differential pulse polarography (DPP), and square wave voltammetry (SWV) on a glassy carbon electrode in I = 0.1 mol/L p-toluenesulfonate as supporting electrolyte.     

Fluorescence and Electrochemical Sensing of Pesticides Methomyl, Aldicarb and Prometryne by the Luminescent Europium-3-Carboxycoumarin Probe

This work describes the application of time resolved fluorescence in microtiterplates and electrochemical methods on glassy carbon electrode for investigating the interactions of europium-3-carboxycoumarin with pesticides aldicarb, methomyl and prometryne. Stern-volmer studies at different temperatures indicate that static quenching dominates for methomyl, aldicarb and prometryne. By using Lineweaver-Burk equation binding constants were determined at 303 K, 308 K and 313 K. A thermodynamic analysis showed that the reaction is spontaneous with ΔG being negative. The enthalpy ΔH and the entropy ΔS of reactions were all determined. A time-resolved (gated) luminescence-based method for determination of pesticides in microtiterplate format using the long-lived europium-3-carboxycoumarin has been developed. The limit of detection is 4.80, 5.06 and 8.01 μmol L⁻¹ for methomyl, prometryne and aldicarb, respectively. This is the lowest limit of detection achieved so far for luminescent lanthanide-based probes for pesticides. The interaction of the probe with the pesticides has been investigated using cyclic voltammetry (CV), differential pulse polarography (DPP), square wave voltammetry (SWV) and linear sweep voltammetry (LSV) on a glassy carbon electrode in I = 0.1 mol L⁻¹ p-toluenesulfonate at 25 °C. The diffusion coefficients of the reduced species are calculated. The main properties of the electrode reaction occurring in a finite diffusion space are the quasireversible maximum and the splitting of the net SWV peak for Eu(III) ions in the ternary complex formed . It was observed that the increase of the cathodic peak currents using LSV is linear with the increase of pesticides concentration in the range 5 × 10⁻⁷ to 1 × 10⁻⁵ mol L⁻¹. The detection limit (DL) were about 1.01, 2.23 and 1.89 μmolL⁻¹ for aldicarb, methomyl and prometryne, respectively. In order to assess the analytical applicability of the method, the influence of various potentially interfering species was examined. Influence of interfering species on the recovery of 10 μmol L⁻¹ pesticides has been investigated.     

Synthesis, characterization, DNA binding and cleavage studies of mixed-ligand Cu(II) complexes of 2,6-bis(benzimidazol-2-yl)pyridine

Four novel copper(II) complexes of the composition [CuLX] where L = 2,6-bis(benzimidazole-2yl)pyridine, X = dipyridophenazine (L₁), 1,10-phenanthroline (L₂), hydroxyproline (L₃) and 2,6-pyridine dicarboxylic acid (L₄) were synthesized and characterized by using elemental analysis, FT-IR, UV–vis, ESI-MS, molar conductance and magnetic susceptibility measurements. The complexes [CuLL₁](NO₃)₂ [1], [CuLL₂](NO₃)₂ [2], [CuLL₃](NO₃) [3] and [CuLL₄] (NO₃) [4] are stable at room temperature. In DMSO the complexes [1] and [2] are 1:2 electrolytes, [3] and [4] are 1:1 electrolytes. Based on elemental and spectral studies five coordinated geometry is assigned to all the four complexes. The interaction of four copper ion complexes with calf thymus DNA were carried out by UV–vis titrations, fluorescence spectroscopy, thermal melting and viscosity measurements .The binding constant (K_b) of the above four metal complexes were determined as 5.43 × 10⁴ M_,⁻¹ 2.56 × 10⁴ M⁻¹, 1.21 × 10⁴ M⁻¹ and 1.57 × 10⁴ M⁻¹ respectively. Quenching studies of the four complexes indicates that these complexes strongly bind to DNA, out of all complex 1 is binding more strongly. Viscosity measurements indicate the binding mode of complexes with CT DNA by intercalation through groove. Thermal melting studies also support intercalative binding. The nuclease activity of the above metal complexes shows that 1, 2 and 3 complexes cleave DNA through redox chemistry.     

Validated Spectrofluorimetric Method for the Determination of Lamotrigine in Tablets and Human Plasma Through Derivatization with <Emphasis Type="BoldItalic">o</Emphasis>-phthalaldehyde

A sensitive, simple and selective spectrofluorimetric method was developed for the determination of Lamotrigine (LMT) in pharmaceutical formulations and biological fluids. The method is based on reaction of LMT with o-phthalaldehyde in presence of 2-mercaptoethanol in borate buffer of pH 9.8 to yield a highly fluorescent derivative that is measured at 448 nm after excitation at 337 nm. The different experimental parameters affecting the development and stability of the reaction product were carefully studied and optimized. The fluorescence-concentration plot was rectilinear over the range of 0.1–1.0 μg ml⁻¹ with lower limit of detection (LOD) 0.02 μg ml⁻¹ and limit of quantification (LOQ) 0.06 μg ml⁻¹ respectively. The proposed method was successfully applied to the the analysis of commercial tablets. Statistical comparison of the results obtained by the proposed and reference method revealed no significant difference in the performance of the two methods regarding the accuracy and precision respectively. The proposed method was further extended to the in-vitro and in-vivo determination of the drug in spiked and real human plasma. The mean percentage recoveries in spiked and real human plasma (n = 3) were 95.78 ± 1.37 and 90.93 ± 2.34 respectively. Interference arising from co-administered drugs was also studied. A proposal for the reaction pathway with o-phthalaldehyde was postulated.     

Sensitive Phosphorimetric Determination of Bumetanide in Human Urine with Its Inhibition Effect on the Formation of [Fe-morin] <Superscript>3+</Superscript> Complex

A novel solid substrate-room temperature phosphorimetry (SS-RTP) was developed for determination of bumetanide (BMTN). It was validated by determining selectivity, linearity, accuracy, precision, and signal to noise ratio (S/N) for analysis. And all the experiments presented in this work were based on that BMTN inhibited the formation of [Fe-morin]³⁺ ([FeR]³⁺) complex by the reaction between Fe³⁺ and R, which led to severe quenching of room temperature phosphorescence (RTP) signal. The rate constant of the reaction (k) was 2.44 × 10⁻⁴ s⁻¹, the activation energy (E) was 21.39 kJ mol⁻¹. Detection limit of this method (LD, 5.0 ag spot⁻¹, corresponding concentration was 1.2 × 10⁻¹⁴ g mL⁻¹) was evaluated and compared with other methods, indicating better sensitivity for BMTN determination using this technique. And due to the high sensitivity of the method, it has been successfully applied to determine BMTN in human urine samples. The linear range was from 0.040 pg mL⁻¹ to 4.0 pg mL⁻¹, allowing wide determined range of BMTN. Meanwhile, the mechanism of this method was also discussed.     

Spectrophotometric and Spectrofluorimetric Determination of Certain Diuretics Through Ternary Complex Formation with Eosin and Lead (II)

Simple and sensitive spectrophotometric and spectrofluorimetric methods have been developed for the determination of hydrochlorothiazide (I), indapamide (II) and xipamide(III) based on ternary complex formation with eosin and lead (II) in the presence of methylcellulose as surfactant. The methods do not involve solvent extraction. For spectrophotometric method, the ternary complex showed an absorption maximum at 543 nm. The factors affecting the formation of ternary complex were studied and optimized. The method obeys Beer’s law over concentration range of 8–40 μg mL⁻¹. A fluorescence quenching method for the determination of the cited drugs by forming this ternary complex was also investigated for the purpose of enhancing the sensitivity of the determination. The analytical performance of both methods was fully validated, and the results were satisfactory. The methods have been successfully applied for the determination of the studied drugs in their pharmaceutical tablets and the results obtained ware in good agreement with those obtained by the reference method. Common excipients used as additives in tablets do not interfere with the proposed methods.     

Interaction of a New Fluorescent Probe with DNA and its Use in Determination of DNA

In this paper we reported a metal complex 1-Zn (2,5-di-[2-(3,5-bis(2-pyridylmethyl)amine-4-hydroxy-phenyl)-ethylene]-pyrazine-Zn) as a fluorescent probe sensing DNA. The result of the competitive experiment of the probe with ethidium bromide (EB) to bind DNA, absorption spectral change and polarization change in the presence and absence of DNA revealed that interaction between the probe and DNA was via intercalation. Ionic strength experiment showed the existence of electrostatic interaction as well. Scatchard plots also confirmed the combined binding modes. The fluorescence enhancement of the probe was ascribed to highly hydrophobic environment when it bound the macromolecules such as DNA, RNA or denatured DNA. The binding constant between the probe and DNA was estimated as 3.13 × 10⁷ mol⁻¹ L. The emission intensity increase was proportional to the concentration of DNA. Based on this, the probe was used to determine the concentration of calf thymus DNA (ct-DNA). The corresponding linear response ranged from 2.50 × 10⁻⁷ to 4.75 × 10⁻⁶ mol L⁻¹, and detection limit was 1.93 × 10⁻⁸ mol L⁻¹ for ct-DNA.     

Synthesis of Novel Eu(III) Luminescent Probe Based on 9- Acridinecarboxylic Acid Skelton for Sensing of ds-DNA

Eu(III)-9-acridinecarboxylate (9-ACA) complex was synthesized and characterized by elemental analysis, conductivity measurement, IR spectroscopy, thermal analysis, mass spectroscopy, ¹H-NMR, fluorescence and ultraviolet spectra. The results indicated that the composition of this complex is [Eu(III)-(9-ACA)₂(NCS)(C₂H₅OH)₂] 2.5 H₂O and the oxygen of the carbonyl group coordinated to Eu(III). The interaction between the complex with nucleotides guanosine 5′- monophosphate (5′-GMP), adenosine 5′-diphosphates (5′-ADP), inosine (5′-IMP) and CT-DNA was studied by fluorescence spectroscopy. The fluorescence intensity of Eu(III)-9-acridinecarboxylate complex was enhanced with the addition of CT-DNA. The effect of pH values on the fluorescence intensity of Eu(III) complex was investigated. Under experimental conditions, the linear range was 9–50 ng mL⁻¹ for calf thymus DNA (CT- DNA) and the corresponding detection limit was 5 ng mL⁻¹. The results showed that Eu(III)-(9-ACA)₂ complex binds to CT-DNA with stability constant of 2.41 × 10⁴ M .