One-step vs stepwise immobilization of 1-d coordination-based rh-rh molecular wires on gold surfaces

Reaction of dimeric [Rh(II)(2)(phen)(2)(μ-OAc)(2)(MeCN)(2)](BF(4))(2) (phen =1,10-phenanthroline) with pyrazine (pz) in a 1:2 ratio leads to the new 1-D metal-metal-bonded coordination oligomer {[Rh(II)(2)(phen)(2)(μ-OAc)(2)(pz)](BF(4))(2)}(n) (Rh-Rhpz)(n) (1), where each Rh atom of the dimeric unit (Rh-Rh) is coordinated in the equatorial plane to a nitrogen atom of a rigid and linear bifunctionalized organic linker (pz). Single X-ray diffraction analysis reveals the 1-D straight oligomeric chain structure (molecular wire, MW) consists of alternating (Rh-Rh) units and pz linking ligands with free BF(4)(-) as counteranions, and each metal center has a slightly distorted octahedral arrangement. The presence of accessible labile MeCN groups on both ends of these MWs ("free ends") enables functionalization of a 4-mercaptopyridine-gold coordinating platform (Au/MP) to form in one step a layer of coordination oligomer (Au/MP(Rh-Rhpz)(n); n ≈ 50). Furthermore (Rh-Rhpz)(n) (n = 1-6) MWs were grafted to Au/MP surfaces by a conventional step-by-step assembly construction involving coordination reactions between the Rh dimer ([Rh(2)(phen)(2)(μ-OAc)(2)(MeCN)(2)](BF(4))(2) (2)) and pz. A detailed physicochemical study (UV-vis, RAIR, QCM-D, ellipsometry, contact angle measurements, as well as impedance spectroscopy and cyclic voltammetry) has been made during both assembly methods to characterize the resulting surface-anchored coordination molecular wire (CMW) layers (Au/MP(Rh-Rhpz)(n)). The results indicate that the immobilized molecular assemblies (MAs) were successfully fabricated using both methods of assembly. The efficiency of the two methods is discussed.     

Dirhodium formamidinate compounds with bidentate nitrogen chelating ligands

The reactions of [Rh(2)(DTolF)(2)(CH(3)CN)(6)][BF(4)](2) (1) (DTolF = N,N'-di-p-tolylformamidinate) with 2,2'-bipyridine (bpy) and 1,10-phenanthroline (phen) proceed with substitution of CH(3)CN molecules to give products with the N-N ligands chelating in an equatorial-equatorial (eq-eq) fashion. Compound 1 reacts with 1 equiv of bpy to yield a mixture of [Rh(2)(DTolF)(2)(bpy)(CH(3)CN)(3)][BF(4)](2).(CH(3))(2)CO (2a) and [Rh(2)(DTolF)(2)(bpy)(CH(3)CN)(4)][BF(4)](2) (2b). Compound 2a crystallizes in the monoclinic space group P2(1)/n with a = 13.5856(2) A, b = 18.0402(2) A, c = 21.4791(3) A; alpha = 90 degrees, beta = 101.044(1) degrees, gamma = 90 degrees; V = 5167.27(12) A(3), Z = 4, R = 0.0531, and R(w) = 0.0948. Compound 2b crystallizes in the monoclinic space group P2(1)/n with a = 10.9339(2) A, b = 24.4858(1) A, c = 19.4874(3) A; alpha = 90 degrees, beta = 94.329(1) degrees, gamma = 90 degrees; V = 5202.38(13) A(3), Z = 4, R = 0.0459, and R(w) = 0.1140. The reaction of compound 1 with 2 equiv of bpy affords [Rh(2)(DTolF)(2)(bpy)(2)(CH(3)CN)][BF(4)](2) (3) which crystallizes in the monoclinic space group P2(1)/a with a = 19.4534(4) A, b = 13.8298(3) A, c = 19.8218(5) A; alpha = 90 degrees, beta = 109.189(1) degrees, gamma = 90 degrees; V = 5036.5(2) A(3), Z = 4, R = 0.0589, and R(w) = 0.0860. Compound 1 reacts with 1 equiv of phen to form [Rh(2)(DTolF)(2)(phen)(CH(3)CN)(3)][BF(4)](2).2C(2)H(5)OC(2)H(5) (4) which crystallizes in the triclinic space group P1macro with a = 12.6346(2) A, b = 13.5872(2) A, c = 19.0597(3) A; alpha = 71.948(1) degrees, beta = 73.631(1) degrees, gamma = 71.380(1) degrees; V = 2886.70(8) A(3), Z = 2, R = 0.0445, and R(w) = 0.1207. A notable feature of the cations in 2a, 3, and 4 is the presence of only one axial (ax) CH(3)CN ligand, a fact that can be attributed to the steric effect of the formamidinate bridging ligands. Compounds 2a, 2b, 3, and 4 were fully characterized by X-ray crystallography and (1)H NMR spectroscopy, whereas [Rh(2)(DTolF)(2)(phen)(2)(CH(3)CN)(2)][BF(4)](2) (5) was characterized by (1)H NMR spectroscopy.     

Synthesis and characterization of aryl substituted bis(2-pyridyl)amines and their copper olefin complexes: investigation of remote steric control over olefin binding

The aryl-functionalized pyridylamine 2-(i)PrC(6)H(4)N(H)py (1) and bis(2-pyridyl)amines of the type ArN(py)(2) for Ar = Mes (2), 2,6-Et(2)C(6)H(3) (3), 2-(i)PrC(6)H(4) (4), 2,6-(i)Pr(2)C(6)H(3) (5), and 1-naph (6), have been prepared by the palladium-catalyzed cross-coupling of substituted anilines with 2-bromopyridine, and have been characterized by (1)H and (13)C NMR NMR, FTIR, MS, and TGA. Complexes of these new N-aryl bis(2-pyridyl)amines have been prepared for the acid salts [H{ArN(py)(2)}]BF(4) where Ar = Mes (7) and 2-(i)PrC(6)H(4) (8), and the dimeric bridged complexes [Cu{ArN(py)(2)}(μ-X)(Y)](2) where X/Y = Cl(-) and Ar = Ph (9), 2-(i)PrC(6)H(4) (10), and 1-naph (11), in addition to X = OH(-), Y = H(2)O and Ar = Mes (12). The olefin complexes [Cu(Ar-dpa)(styrene)]BF(4) for Ar = Ph (13), Mes (14), 2-(i)PrC(6)H(4) (15), and 1-naph (16), in addition to the norborylene complexes of Ar = Mes (17) and 2-(i)PrC(6)H(4) (18) have been prepared and characterized by (1)H and (13)C NMR, FTIR, and TGA. The crystal structures have been determined for compounds 1-17. Secondary amine 1 crystallizes in hydrogen-bonded head-to-tail dimers, while the N-aryl bis(2-pyridyl)amines 2-6 crystallize in a three-bladed propellar conformation, having nearly planar geometries about the amine nitrogen. The geometry about copper centers in the dimeric complexes 9-12 is distorted trigonal bypyramidal, with the axial positions occupied by one of the two pyridyl nitrogens and one of the bridging ligands (i.e., Cl or OH). The copper atoms in each of the olefin complexes 13-17 are coordinated to the two pyridine nitrogen atoms and the appropriate olefin; consistent with a pseudo three-coordinate Cu(I) cation. Distortion of pyridyl ring geometries about the copper centers, and concomitant bending of the aryl groups away from the CuN(amine) vectors were found to correlate with the steric bulk of the aryl group present in both dimeric and olefin complexes. Such distortion is also observed to a lesser extent in the acid salts as well. The (1)H and (13)C NMR spectra of [Cu(Ar-dpa)(olefin)]BF(4) exhibit an upfield shift in the olefin signal as compared to free olefin. A good correlation exists between the (1)H and (13)C NMR Δδ values and olefin dissociation temperatures, confirming that the shift of the olefin NMR resonances upon coordination is associated with the binding strength of the complex.     

Heteroligated metallomacrocycles generated via the weak-link approach

Sequential reaction of two different hemilabile ligands (Ph(2)PCH(2)CH(2)X)(2)Ar (X = S, Ar = C(6)H(4) or C(6)(CH(3))(4); X = NCH(3), Ar = C(6)H(4); X = O, Ar = 9,10-C(14)H(8)) with a Rh(I) metal center resulted in the formation of heteroligated metallomacrocycles in high yield. The specific reaction conditions for each pair of hemilabile ligands are discussed. The solid-state structure of [[1,4-(Ph(2)PCH(2)CH(2)S)(2)C(6)H(4)]-[1,4-(Ph(2)PCH(2)CH(2)S)(2)C(6)(CH(3))(4)]Rh(2)](BF(4))(2), as determined by X-ray crystallography, is presented.     

Short metal-metal separations in a highly luminescent trimetallic Ag(I) complex stabilized by bridging NHC ligands

Reaction of 1,3-bis(2-pyridinylmethyl)-1H-imidazolium salt, [H(pyCH(2))(2)im]X (X = BF(4)(-) or Cl(-)), with silver oxide in acetonitrile readily yields yellow-brown [((pyCH(2))(2)im)(2)Ag]X, 1.BF(4) or 1.Cl. The chloride salt crystallizes with 3.650 A intermolecular Ag...Ag interactions while 1.BF(4) shows no short intermolecular interaction. Addition of excess Ag(BF(4)) produces the homoleptic carbene bridged trimetallic species, [(mu-NHC)(3)Ag(3)](BF(4))(3), 2. This species contains very short Ag-Ag separations between 2.7249(10) and 2.7718(9) A. In solution, these complexes are photoluminescent.     

Oxidation-promoted synthesis of ferrocenyl planar chiral rhodium(iii) complexes for C–H functionalization catalysis

The chemical oxidation of rhodium(i) complexes [Rh(L)(COD)][BF4], where L is a ferrocenyl phosphine/N-heterocyclic carbene ligand, with 2 equiv. of a triaryl-aminium salt [(4-BrC6H4)3N][BF4] in acetonitrile gave planar chiral, air-stable [Rh(L–H)(MeCN)3][BF4]2 complexes where the ferrocene (C5H4CH2ImR or C5H4CH2BImCH2Mes) ring has been C–H activated at the position 2 in good to excellent yields. An important reactivity difference between our complexes and the ubiquitous [Cp*Rh(MeCN)3]X2 complex has been observed in the Grignard-type arylation of 4-nitrobenzaldehyde.     

Self-assembly of [M8L4] and [M4L2] fluorescent metallomacrocycles with carbazole-based dipyrazole ligands

Fluorescent carbazole-based dipyrazole ligands (H(2)L(1-4)) were employed to coordinate with dipalladium corners ([(phen)(2)Pd(2)(NO(3))(2)](NO(3))(2), [(dmbpy)(2)Pd(2)(NO(3))(2)](NO(3))(2), or [(15-crown-5-phen)(2)Pd(2)(NO(3))(2)](NO(3))(2), where phen = 1,10-phenanthroline and dmbpy = 4,4'-dimethyl-2,2'-bipyridine, in aqueous solution to afford a series of positively charged [M(8)L(4)](8+) or [M(4)L(2)](4+) multimetallomacrocycles with remarkable water solubility. Their structures were characterized by (1)H NMR spectroscopy, electrospray ionization mass spectrometry, and elemental analysis and in the cases of 1·8BF(4)(-) ([(phen)(8)Pd(8)L(1)(4)](BF(4))(8)), and 3·4BF(4)(-) ([(phen)(4)Pd(4)L(2)(2)](BF(4))(4)) by single-crystal X-ray diffraction analysis. Complexes 3-8 are square-type hybrid metallomacrocycles, while complexes 1 and 2 exhibit folding cyclic structures. Interestingly, in single-crystal structures of 1·8BF(4)(-) and 3·4BF(4)(-), BF(4)(-) anions are trapped in the dipalladium clips through anion-π interaction. The luminescence properties and interaction toward anions of these metallomacrocycles were discussed.     

含半夹心结构铑的1,1'-二硫(硒、碲)二茂铁化合物

以半夹心结构铑的化合物Cp*Rh(CN^tBu)Cl2(1)(Cp*=η^5-C5Me5)与Fe(C5H4ELi)2.2THF反应,合成出异双核二茂铁化合物Cp*Rh(CN^tBu)(EC5H4)2Fe[E=S(2),Se(3),Te(4)]。通过AgBF4氧化2和3得到二茂铁离子型化合物[Cp*Rh(CN^tBu)(EC5H4)2Fe]BF4[E=S(5),Se(6)]。采用元素分析、红外光谱、^1H和13CNMR谱以及EI-MS表征了所合成的化合物。     

Structural and spectroscopic evidence for the formation of trinuclear and tetranuclear vanadium(III)/carboxylate complexes of acetate and related derivatives in aqueous solution

The formation of vanadium(III) complexes with nuclearity greater than two is believed to occur in aqueous solution on the basis of potentiometric, electrochemical, and/or UV-vis spectroscopy titration measurements, although structural evidence for this is limited. Upon the addition of 1-2 equiv of acetate, propionate, chloroacetate, trifluoroacetate, or bromoacetate to an aqueous, acidic solution of vanadium(III), trinuclear and tetranuclear complexes are formed. The structures of [V4(mu-OH)4(mu-OOCCF3)4(OH2)8]Cl4.7.5H2O (1), [V4(mu-OH)4(mu-OOCCH3)4(OH2)8]Cl4.CH3COOH.12H2O (2), [V4(mu-OH)4(mu-OOCCH3)4(OH2)8]Cl4.3H2O (3), [V3(mu3-O)(mu-OOCCH2Br)6(OH2)3]CF3SO3.H2O (4), [V3(mu3-O)(mu-OOCCH2CH3)6(OH2)3]Cl.2H2O (5), [V3(mu3-O)(mu-OOCCH3)6(OH2)3]Cl.3.5H2O (6), and [V3(mu3-O)(mu-OOCCH2Cl)6(OH2)3]CF3SO3.H2O (7) have been determined by X-ray diffraction. Importantly, electrospray mass spectrometry and 1H NMR measurements suggest that these complexes are not purely solid-state phenomena but are also present in solution. For the vanadium(III)/acetate and vanadium(III)/propionate systems, two paramagnetic 1H NMR signals corresponding to two distinct complexes (species A and B) are observed in the 40-55 ppm region for 0.20 mol equiv of acetate or propionate, at pD 3.44. No corresponding signals are observed for the vanadium(III)/bromoacetate and vanadium(III)/chloroacetate systems under the same conditions or for the vanadium(III)/ trifluoroacetate system using 19F NMR spectroscopy. UV-vis spectra suggest that species B are structurally analogous for the vanadium(III)/acetate and vanadium(III)/propionate systems, whereas structurally different complexes are the major species for the other systems. Diffusion coefficients of species B for the vanadium(III)/acetate and vanadium(III)/propionate systems determined by pulsed-field-gradient spin-echo NMR spectroscopy measurements are (3.0 +/- 0.1) x 10-6 and (3.23 +/- 0.01) x 10-6 cm2 s-1, respectively, and are most consistent with species B being trimeric, rather than tetranuclear, complexes.     

Large improvement in the catalytic activity due to small changes in the diimine ligands: new mechanistic insight into the dirhodium(II,II) complex-based photocatalytic H2 production

Two dirhodium(II) complexes, [Rh(II)(2)(μ-O(2)CCH(3))(2)(bpy)(2)](O(2)CCH(3))(2) (Rh(2)bpy(2); bpy = 2,2'-bipyridine) and [Rh(II)(2)(μ-O(2)CCH(3))(2)(phen)(2)](O(2)CCH(3))(2) (Rh(2)phen(2); phen = 1,10-phenanthroline) were synthesized, and their photocatalytic H(2) production activities were studied in multicomponent systems, containing [Ir(III)(ppy)(2)(dtbbpy)](+) (ppy = 2-phenylpyridine, dtbbpy = 4,4'-di-tert-butyl-2,2'-bipyridine) as the photosensitizer (PS) and triethylamine as the sacrificial reductant (SR). There is a more than 6-fold increase in the photocatalytic activity from Rh(2)bpy(2) to Rh(2)phen(2) just using phen in place of bpy. A turnover number as high as 2622 was obtained after 50 h of irradiation of a system containing 16.7 μM Rh(2)phen(2), 50 μM PS, and 0.6 M SR. The electrochemical, luminescence quenching, and transient absorption experiments demonstrate that Rh(I)Rh(I) is the true catalyst for the proton reduction. The real-time absorption spectra confirm that a new Rh-based species formed upon irradiation of the Rh(2)phen(2)-based multicomponent system, which exhibits an absorption centered at ～575 nm. This 575-nm intermediate may account for the much higher H(2) evolution efficiency of Rh(2)phen(2). Our work highlights the importance of N-based chelate ligands and opens a new avenue for pursuing more efficient Rh(II)(2)-based complexes in photocatalytic H(2) production application.     

Alkaline earth metal ions mediated self-assembly in the presence of 1,10-phenanthroline, nitrate and tetrafluoroborate anions

1,10-Phenanthroline (phen) was reacted with various combinations of two and in one of the cases with three alkaline earth metal cations taken in equimolar ratio. In all the competitive reactions it was obtained only one product free of any impurities, which is in accordance with the theory of self-assembly processes. The compound [Ca(phen)2(H2O)2(NO3)]NO3 was synthesized in all the reactions where Ca(2+) was involved. In contrast, none of the reactions led to the preparation of a strontium complex. Two of the reactions, in which participated Be(2+), resulted in the compound (phen)3(H+)2(NO(-)(3))2. The second group of competitive reactions was carried out with 1,10-phenanthroline and a given alkaline earth metal cation in the presence of the anions NO(3)(-) and BF(4)(-). These led to the compounds Mg(phen)4(BF4)2(H2O)3, [Ca(phen)2(H2O)2(NO3)]BF4, Sr(phen)4(OH)(BF4)(H2O) and Ba(phen)3.5(BF4)2(H2O). All the newly synthesized substances were characterized by elemental analysis, IR- and FAB-mass-spectra.     

(iPr3P)6Rh6H12]2+: a high-hydride content octahedron that bridges the gap between late and early transition metal clusters

Treatment of [(iPr3P)2Rh(nbd)][Y] {nbd = norbornadiene, Y = B{3,5-(CF3)2C6H3}4- [B(ArF)4] or 1-H-closo-CB11Me11-} with H2 (ca. 4 atm) results in the isolation, in moderate yield, of the octahedral cluster complex [(iPr3P)6Rh6H12][Y]2 1. The cluster (for both anions) has been characterized by NMR, mass spectroscopy, and X-ray crystallography. These show 1 to have 12 edge-bridging hydrogen atoms, and the structure bears more resemblance to clusters of the early transition metals with pi-donor ligands than those of the late transition metals with pi-acceptor ligands. Intermediate complexes on the route to 1, namely, the nonclassical dihydrogen complexes [(iPr3P)2Rh(H)2(eta2-H2)x][B(ArF)4] (x = 1 or 2), have been observed spectroscopically. The high hydride content of 1 makes it a possible model for nanocluster colloidal Rh(0) catalysts that are used in olefin and arene hydrogenation.     

一维螺旋链状过渡金属-苹果酸配合物的合成、晶体结构及表征

本文用铜、邻菲咯啉、钼酸铵和苹果酸合成了1种新型配合物Cu₂(phen)₂( μ-O)₂Mo(C₄H₃O₅)₂·7H₂O(1,phen=1,10-邻菲咯啉,C₄H₃O₅^3-=苹果酸根阴离子),并对它进行了单晶X射线衍射,红外光谱,元素分析等表征。X射线衍射分析表明配合物为苹果酸和邻菲咯啉桥联形成的三核铜及钼中心的一维螺旋链状结构,并通过氢键自组装成三维超分子化合物。另外,对配合物的固态的固体荧光性能也进行了研究。     

Evaluation of the binding ability of a novel dioxatetraazamacrocyclic receptor that contains two phenanthroline units: selective uptake of carboxylate anions

The novel dioxatetraaza macrocycle [26]phen2N4O2, which incorporates two phenanthroline units, has been synthesized, and its acid-base behavior has been evaluated by potentiometric and 1H NMR methods. Six protonation constants were determined, and the protonation sequence was established by NMR. The location of the fifth proton on the phen nitrogen was confirmed by X-ray determinations of the crystal structures of the receptor as bromide and chloride salts. The two compounds have the general molecular formula {(H5[26]phen2N4O2)Xn(H2O)(5-n)}X(n-1) x mH2O, where X = Cl, n = 3, and m = 6 or X = Br, n = 4, and m = 5.5. In the solid state, the (H5[26]phen2N4O2)(5+) cation adopts a "horseshoe" topology with sufficient room to encapsulate three or four halogen anions through the several N-H...X hydrogen-bonding interactions. Two supermolecules {(H5[26]phen2N4O2)Xn(H2O)5-n}(5-n)(+) form an interpenetrating dimeric species, which was also found by ESI mass spectrum. Binding studies of the protonated macrocycle with aliphatic (ox(2-), mal(2-), suc(2-), cit(3-), cta(3-)) and aromatic (bzc(-), naphc(-), anthc(-), pyrc(-), ph(2-), iph(2-), tph(2-), btc(3-)) anions were determined in water by potentiometric methods. These studies were complemented by 1H NMR titrations in D2O of the receptor with selected anions. The Hi[26]phen2N4O2(i+) receptor can selectively uptake highly charged or extended aromatic carboxylate anions, such as btc(3-) and pyrc(-), in the pH ranges of 4.0-8.5 and <4.0, respectively, from aqueous solution that contain the remaining anions as pollutants or contaminants. To obtain further insight into these structural and experimental findings, molecular dynamics (MD) simulations were carried out in water solution.     

Interplay between solvent and counteranion stabilization of highly unsaturated rhodium(III) complexes: facile unsaturation-induced dearomatization

Abstraction of the chloride ligand from the PCN-based chloromethylrhodium complex 2 by AgX (X=BF(4)(-), CF(3)SO(3)(-)) or a direct C-C cleavage reaction of the PCN ligand 1 with [(coe)(2)Rh(solv)(n)](+)X(-) (coe=cyclooctene) lead to the formation of the coordinatively unsaturated rhodium(III) complexes 3. Compound 3 a (X=BF(4)(-)) exhibits a unique medium effect; the metal center is stabilized by reversible coordination of the bulky counteranion or solvent as a function of temperature. Reaction of [(PCN)Rh(CH(3))(Cl)] with AgBAr(f) in diethyl ether leads to an apparent rhodium(III) 14-electron complex 4, which is stabilized by reversible, weak coordination of a solvent molecule. This complex coordinates donors as weak as diethyl ether and dichloromethane. Upon substitution of the BF(4)(-) ion in [(PCN)Rh(CH(3))]BF(4) by the noncoordinating BAr(f)(-) ion in a noncoordinating medium, the resulting highly unsaturated intermediate undergoes a 1,2-metal-to-carbon methyl shift, followed by beta-hydrogen elimination, leading to the Rh-stabilized methylene arenium complex 5. This process represents a unique mild, dearomatization of the aromatic system induced by unsaturation.     

Synthesis and properties of Rh(I) and Ir(I) distibine complexes with organometallic co-ligands

The first series of Rh(I) distibine complexes with organometallic co-ligands is described, including the five-coordinate [Rh(cod)(distibine)Cl], the 16-electron planar cations [Rh(cod)(distibine)]BF4 and [Rh{Ph2Sb(CH2)3SbPh2}2]BF4 and the five-coordinate [Rh(CO)(distibine)2][Rh(CO)2Cl2] (distibine=R2Sb(CH2)3SbR2, R=Ph or Me, and o-C6H4(CH2SbMe2)2). The corresponding Ir(I) species [Ir(cod)(distibine)]BF4 and [Ir{Ph2Sb(CH2)3SbPh2}2]BF4 have also been prepared. The complexes have been characterised by 1H and 13C{1H} NMR and IR spectroscopy, electrospray mass spectrometry and microanalysis. The crystal structure of the anion exchanged [Rh(CO){Ph2Sb(CH2)3SbPh2}2]PF(6).3/4CH2Cl2 is also described. The methyl-substituted distibine complexes are less stable than the complexes of Ph2Sb(CH2)3SbPh2, with C-Sb fission occurring in some of the complexes of the former. The salts [Rh(CO){Ph2Sb(CH2)3SbPh2}2]PF6 and [Rh{Ph2Sb(CH2)3SbPh2}2]BF4 undergo oxidative addition with Br2 to give the known [RhBr2{Ph2Sb(CH2)3SbPh2}2]+, while using HCl gives the same hydride complex from both precursors, which is tentatively assigned as [RhHCl2{Ph2Sb(CH2)3SbPh2}]. An unexpected further Rh(III) product from this reaction, trans-[RhCl2{Ph2Sb(CH2)3SbPh2}{PhClSb(CH2)3SbClPh}]Cl, was identified by a crystal structure analysis and represents the first structurally characterised example of a chlorostibine coordinated to a metal. [Rh{Ph2Sb(CH2)3SbPh2}2]BF4 reacts with CO to give [Rh(CO){Ph2Sb(CH2)3SbPh2}2]BF4 initially, and upon further exposure this species undergoes further reversible carbonylation to give a cis-dicarbonyl species thought to be [Rh(CO)2{Ph2Sb(CH2)3SbPh2}{kappa1Sb-Ph2Sb(CH2)3SbPh2}]BF4 which converts back to the monocarbonyl complex when the CO atmosphere is replaced with N2.     

Tetranuclear [Rh4(mu-PyS2)2(diolefin)4] complexes as building blocks for new inorganic architectures: synthesis of coordination polymers and heteropolynuclear complexes with electrophilic d8 and d10 metal fragments

The reaction of [Rh4(mu-PyS2)2(cod)4] (PyS2 = 2,6-pyridinedithiolate, cod = 1,5-cyclooctadiene) with CF3SO3Me gave the cationic complex [Rh(4)(mu-PyS(2)Me)(2)(cod)4][CF3SO3]2 (1) with two 6-(thiomethyl)pyridine-2-thiolate bridging ligands from the attack of Me+ at the terminal sulfur atoms of the starting material. Under identical conditions [Rh4(mu-PyS2)2(tfbb)4] (tfbb = tetrafluorobenzobarrelene) reacted with CF3SO3Me to give the mixed-ligand complex [Rh(4)(mu-PyS2)(mu-PyS2Me)(tfbb)4][CF3SO3] 2. The nucleophilicity of the bridging ligands in the complexes [Rh4(mu-PyS2)2(diolefin)4] was exploited to prepare heteropolynuclear species. Reactions with [Au(PPh3)(Me2CO)][ClO4] gave the hexanuclear complexes [(PPh3)2Au2Rh4(mu-PyS2)2(diolefin)4][ClO4]2 (diolefin = cod (3), tfbb (4)). The structure of 4, solved by X-ray diffraction methods, showed the coordination of the [Au(PPh3)]+ fragments to the peripheral sulfur atoms in [Rh4(mu-PyS2)2(diolefin)4] along with their interaction with the neighbor rhodium atoms. Neutral coordination polymers of formula [ClMRh4(mu-PyS2)2(diolefin)4]n (M = Cu (5, 6), Au (7)) result from the self-assembly of alternating [Rh4(mu-PyS2)2(diolefin)4] ([Rh4]) blocks and MCl linkers. The formation of the infinite polymetallic chains was found to be chiroselective for M = Cu; one particular chain contains exclusively homochiral [Rh4] complexes. Cationic heterometallic coordination polymers of formula [MRh4(mu-PyS2)2(diolefin)4]n[BF4]n (M = Ag (8, 9), Cu (10, 11)) and [Rh5(mu-PyS2)2(diolefin)5]n[BF4]n (12, 13) result from the reactions of [Rh4] with [Cu(CH2CN)4]BF4, AgBF4, and [Rh(diolefin)(Me2CO)2]BF4, respectively. The heterometallic coordination polymers exhibit a weak electric conductivity in the solid state in the range (1.2-2.8) x 10(-7) S cm(-1).     

Rhodium and iridium complexes containing the anion of 1-phenyl-3-methyl-4-benzoyl- pyrazolone-5, a sophisticated analogue of β-diketones

Several (diolefin)M(A) complexes (M = Rh, Ir) were prepared, where AH is 1-phenyl-3-methyl- 4-benzoylpyrazolone-5, a very stable asymmetric analogue of acetylacetone. In these complexes the diolefin could be replaced by one mole of (Ph₂PCH₂CH₂)₂, two of CO or of PPh₃, or three of CNBu^t, while 1,10-phenanthroline displaced the chelating ligand to yield [(cyclooctadiene)Rh(phen)]⁺ (A)^?. Some compounds X?Y (X?Y = iodine or MeI) added oxidatively yielding the corresponding trivalent species. Using ³¹P NMR spectra the presence of the expected steric isomers was detected in (Ph₃P)(CO)Rh(A) and in (Ph₃P) (CO)Rh(A)(X)(Y).     

Change of electrical conductivities between hydrated and dehydrated samples of honeycomb sheet structures with mixed oxidation state paddlewheel dirhodium complexes and halide ions

A series of mixed oxidation state compounds, [{Rh(2)(acam)(4)}(3)(μ(3)-X)(2)]·nH(2)O (Hacam = acetamide; X = Cl, n = 4 (1·4H(2)O); X = Br, n = 10 (2·10H(2)O); X = I, n = 10 (3·10H(2)O)) and [{Rh(2)(pram)(4)}(3)(μ(3)-X)(2)]·6H(2)O (Hpram = propionamide; X = Cl (4·6H(2)O), Br (5·6H(2)O), I (6·6H(2)O)) were synthesized and their X-ray structures were determined. In the crystal structure of all of these complexes, dirhodium complexes and halide ions construct 2-D honeycomb sheet arrangements in which the walls consist of Rh(2) units and halide ions lie at the corners. Complexes 1·4H(2)O, 4·6H(2)O, 5·6H(2)O and 6·6H(2)O have three independent Rh(2) units, in which there are two Rh(2)(5+) and one Rh(2)(4+). In these structures, the water molecules hydrogen bond to O atoms and from the N atoms of the amidate ligands. The number of hydrogen bonds from water molecules to the Rh(2)(4+) unit is greater than that to the Rh(2)(5+) units. This suggests that there exists pinning of the oxidation states by water molecules. In the structures of 2·10H(2)O and 3·10H(2)O, all of the Rh(2) units are crystallographically equivalent. In these structures, eight of the 10 water molecules form a honeycomb-like network between the {Rh(2)(acam)(4)}(3)X(2) honeycomb sheets. The former four structures show very low electrical conductivities of ca. 10(-8) S cm(-1) (room temperature, pellets) and the latter structures have the higher values of ca. 10(-4) S cm(-1). In the former complexes, improvement of the values to 10(-6) S cm(-1) was observed, caused by loss of pinning water.     

Synthesis, structure, and spectroscopic characterization of [H(8-n)Rh22(CO)35](n-) (n = 4, 5) and [H2Rh13(CO)24{Cu(MeCN)}2](-) clusters: assessment of CV and DPV as techniques to circumstantiate the presence of elusive hydride atoms

The previously ill-characterized [H(x)Rh(22)(CO)(35)](4-/5-) carbonyl cluster has been obtained as a byproduct of the synthesis of [H(3)Rh(13)(CO)(24)](2-) and effectively separated by metathesis of their sodium salts with [NEt(4)]Cl. Although the yields are modest and never exceed 10-15% (based on Rh), this procedure affords spectroscopically pure [H(3)Rh(22)(CO)(35)](5-) anion. Formation of the latter in mixture with other Rh clusters was also observed by electrospray ionization-mass spectrometry (ESI-MS) in the oxidation of [H(2)Rh(13)(CO)(24)](3-) with Cu(2+) salts. The recovery of further amounts of [H(3)Rh(22)(CO)(35)](5-) was hampered by too similar solubility of the salts composing the mixture. Conversely, the reaction in CH(3)CN of [H(2)Rh(13)(CO)(24)](3-) with [Cu(MeCN)(4)](+)[BF(4)](-) leads to the [H(2)Rh(13)(CO)(24){Cu(MeCN)}(2)](-) bimetallic cluster. The X-ray crystal structures of [H(4)Rh(22)(CO)(35)](4-), [H(3)Rh(22)(CO)(35)](5-), and [H(2)Rh(13)(CO)(24){Cu(MeCN)}(2)](-) are reported. From a formal point of view, the metal frame of the former two species can be derived by interpenetration along two orthogonal axes of two moieties displaying the structure of the latter. The availability of [H(8-n)Rh(22)(CO)(35)](n-) salts prompted their detailed chemical, spectroscopic, and electrochemical characterization. The presence of hydride atoms has been directly proved both by ESI-MS and (1)H NMR. Moreover, both [H(4)Rh(22)(CO)(35)](4-) and [H(3)Rh(22)(CO)(35)](5-) undergo distinctive electrochemically reversible redox changes. This allows to assess electrochemical studies as indisputable though circumstantial evidence of the presence of (1)H NMR-silent hydride atoms in isostructural anions of different charge.