Kinetic prediction of functional group distributions in thermosensitive microgels

A kinetic model accounting for the copolymerization of up to four comonomers is applied to predict both chain and radial functional group distributions in carboxylic-acid-functionalized poly(N-isopropylacrylamide) (NIPAM)-based microgels. The model can accurately predict the experimentally observed radial distributions of functional monomers in microgels prepared using a variety of different carboxylic-acid-functionalized monomers with significantly different hydrophobicities, copolymerization kinetics, and reactivities, without requiring the use of adjustable parameters. Multimodal distributions can both be predicted and experimentally generated by copolymerizing two -COOH-containing monomers with widely different reactivities. Chain distributions and monomer block formation can also be probed using the kinetic model, allowing for qualitative predictions of the potentiometric titration behavior of the microgels. The kinetic model reported herein therefore provides the first available analytical method for semiquantitatively predicting and controlling functional group distributions in bulk-polymerized microgel systems.     

Titrametric characterization of pH-induced phase transitions in functionalized microgels

The chain and radial functional group distributions in carboxylic acid-functionalized poly(N-isopropylacrylamide)-based microgels have significant impacts on the types of swelling responses exhibited by the microgels upon the application of a temperature and/or pH stimulus. Potentiometric, conductometric, and calorimetric titration approaches are used in this work to characterize the chain distributions of -COOH groups in five microgels prepared using different -COOH-functionalized monomers. A direct correlation is observed between the kinetically predicted formation of functional monomer blocks within the microgel, the excess Gibbs free energy of ionization, and the apparent pK(a) versus degree of ionization profiles generated from potentiometric titration. Isothermal titration calorimetry (ITC) can be used to quantify the relative number of functional groups present in microgels prepared with the same functional monomer and/or identify differences between microgels with the same bulk -COOH content but different chain distributions. In particular, microgels prepared with diacid-functionalized monomers exhibit a characteristic two-step ITC profile. For microgels with the same bulk -COOH content, the heat of ionization measured via ITC increases systematically with the overall change in both the pK(a) and the excess Gibbs free energy for microgels prepared with monoacid-functionalized monomers. Diacid monomer-functionalized microgels have lower ionization enthalpies attributable to the break-up of hydrogen-bonded intramolecular ring complexes upon carboxylic acid ionization. The inferred chain functional group distributions can be used to understand differences in microgel swelling across the pH-induced phase transition.     

Calorimetric analysis of thermal phase transitions in functionalized microgels

Differential scanning calorimetry (DSC) is used to investigate the thermal phase transitions of a range of N-isopropylacrylamide (NIPAM)-based, carboxylic acid-functionalized microgels with well-defined radial and chain functional group distributions. The transition enthalpies of protonated microgels can be correlated with the hydrophobicity of the functional comonomer, while the transition enthalpies for ionized microgels can be correlated with the degree of microgel deswelling achieved across the thermal phase transition. The peak widths at half-height vary inversely with the average length of NIPAM blocks in each of the microgels, as calculated using a kinetic copolymerization model. Deconvolution of the asymmetric DSC thermograms is accomplished using a two-transition model, thought to relate to core-shell-type transitions induced by the significant local heterogeneities within the functionalized microgels. The ratio between the two transition temperatures of these deconvoluted peaks is a useful quantitative probe of the radial functional group distribution. An additional, low-temperature transition is also observed in the thermogram of the vinylacetic acid-functionalized microgel, indicative of the occurrence of local chain rearrangements prior to the macroscopic phase transition in this microgel. Complementary light scattering analysis suggests that microphase separation may account for this additional transition peak.     

Symmetric and asymmetric adsorption of pH-responsive gold nanoparticles onto microgel particles and dispersion characterisation

The interaction between carboxylic acid-stabilised gold nanoparticles (AuNP) and pH-responsive microgels is shown. The microgel particles are a copolymer of N-[3-(dimethylamino)propyl]methacrylamide (DMAPMA) and N-isopropylacrylamide (NIPAM). The microgel properties are presented by their hydrodynamic diameter and electrophoretic mobility in response to pH. These microgel particles are pH-responsive under neutral conditions decreasing in diameter beyond pH 7. The dispersion characteristics of AuNP adsorbed onto the microgel network are shown with respect to adsorbed amount and the pH-responsive properties of the AuNP. This data is presented between pH 3 and 6 where the microgel properties remain constant. Asymmetric adsorption of AuNP onto poly(DMAPMA-co-NIPAM) microgels is achieved by adsorption of nanoparticles, from the aqueous phase, onto microgel-stabilised oil-in-water emulsions. These asymmetrically modified microgels display very different dispersion behaviour, in response to pH, due to their dipolar nature.     

Tuning smart microgel swelling and responsive behavior through strong and weak polyelectrolyte pair assembly

The layer-by-layer (LbL) assembly of polyelectrolyte pairs on temperature and pH-sensitive cross-linked poly(N-isopropylacrylamide)-co-(methacrylic acid), poly(NIPAAm-co-MAA), microgels enabled a fine-tuning of the gel swelling and responsive behavior according to the mobility of the assembled polyelectrolyte (PE) pair and the composition of the outermost layer. Microbeads with well-defined morphology were initially prepared by synthesis in supercritical carbon dioxide. Upon LbL assembly of polyelectrolytes, interactions between the multilayers and the soft porous microgel led to differences in swelling and thermoresponsive behavior. For the weak PE pairs, namely poly(L-lysine)/poly(L-glutamic acid) and poly(allylamine hydrochloride)/poly(acrylic acid), polycation-terminated microgels were less swollen and more thermoresponsive than native microgel, whereas polyanion-terminated microgels were more swollen and not significantly responsive to temperature, in a quasi-reversible process with consecutive PE assembly. For the strong PE pair, poly(diallyldimethylammonium chloride)/poly(sodium styrene sulfonate), the differences among polycation and polyanion-terminated microgels are not sustained after the first PE bilayer due to extensive ionic cross-linking between the polyelectrolytes. The tendencies across the explored systems became less noteworthy in solutions with larger ionic strength due to overall charge shielding of the polyelectrolytes and microgel. ATR FT-IR studies correlated the swelling and responsive behavior after LbL assembly on the microgels with the extent of H-bonding and alternating charge distribution within the gel. Thus, the proposed LbL strategy may be a simple and flexible way to engineer smart microgels in terms of size, surface chemistry, overall charge and permeability.     

Functionalized microgel swelling: comparing theory and experiment

A comprehensive gel swelling model accounting for the effects of added salt, counterion/polyelectrolyte charge condensation, inter-cross-link chain length distribution, polyelectrolyte chain stiffness, and direct charge-charge repulsion between fixed polymer network charges has been applied to predict water fraction profiles in -COOH-functionalized microgels based on poly(N-isopropylacrylamide). The model can successfully order the microgels according to their rheologically measured water fractions and explains key differences in observed microgel swelling according to the different functional group and cross-linker distributions in the microgels. The cross-linking efficiency is used as an adjustable variable to match the magnitude of the different model predictions with the experimental water contents from rheological measurements. The resulting cross-linking efficiency predictions are correlated with the ability of the different comonomers to facilitate chain transfer and/or radical termination in the polymerization environment. The model can capture the differing responses of the microgels in the presence of different salt concentrations and can account for the impact of many key physical parameters and heterogeneities in microgel swelling which the Flory-Huggins model cannot directly address.     

Semi-batch control over functional group distributions in thermoresponsive microgels

Thermosensitive poly(N-isopropylacrylamide-co-methacrylic acid) (poly(NIPAM-co-MAA)) microgels were prepared via semi-batch free radical copolymerization in which the functional monomer (methacrylic acid) was continuously fed into the reaction vessel at various speeds. Microgels with the same bulk MAA contents (and thus the same overall compositions) but different radial functional group distributions were produced, with batch copolymerizations resulting in core-localized functional groups, fast-feed semi-batch copolymerizations resulting in near-uniform functional group distributions, and slow-feed semi-batch copolymerizations resulting in shell-localized functional groups. Functional group distributions in the microgels were probed using titration analysis, electrophoresis, and transmission electron microscopy. The induced functional group distributions have particularly significant impacts on the pH-induced swelling and cationic drug binding behavior of the microgels; slower monomer feeds result in increased pH-induced swelling but lower drug binding. This work suggests that continuous semi-batch feed regimes can be used to synthesize thermoresponsive microgels with well-defined internal morphologies if an understanding of the relative copolymerization kinetics of each comonomer relative to NIPAM is achieved.     

Functional group distributions in carboxylic acid containing poly(N-isopropylacrylamide) microgels

Control of the functional group distribution is of fundamental importance in the design of functional polymer particles, particularly in biological applications. Surface-functionalized particles are useful for bioconjugation and medical diagnostics, while internally functionalized particles may have applications in drug delivery. We have prepared a series oftemperature-sensitive poly(N-isopropylacrylamide) (PNIPAM)-based microgels containing carboxylic acid functional groups via copolymerization with methacrylic acid and acrylamide, which was selectively hydrolyzed under optimized conditions to generate the carboxylic acid functionality. The resulting microgels were analyzed using conductometric and potentiometric titration, dynamic light scattering, and electrophoresis. Acrylamide-containing microgels hydrolyzed below the volume phase transition temperature (VPTT) show broad particle size versus temperature profiles, relatively low electrophoretic mobilities at basic pH, and time-dependent base titration profiles, suggesting the presence of internal functional groups whose titration is diffusion-controlled. Methacrylic acid containing microgels show sharper particle size versus temperature profiles, higher electrophoretic mobilities at basic pH, and time-independent base titration profiles, suggesting the presence of a "core-shell" structure with primarily surface functionalization. Similar results were obtained when acrylamide-containing microgels were hydrolyzed at temperatures above the VPTT. Thus, through selection of comonomer and hydrolysis conditions, we have developed strategies to control and characterize the number and distribution ofcarboxylic acid functional groups in PNIPAM-based microgels.     

Assembly of poly(N-isopropylacrylamide)-co-acrylic acid microgel thin films on polyelectrolyte multilayers: Effects of polyelectrolyte layer thickness, surface charge, and microgel solution pH

Temperature- and pH-sensitive poly(N-isopropylacrylamide)?Cco-acrylic acid (pNIPAm-co-AAc) microgels were deposited on glass substrates coated with polyelectrolyte multilayers composed of the polycation poly(allylamine hydrochloride) (PAH) and the polyanion poly(sodium 4-styrenesulfonate) (PSS). The microgel density and structure of the resultant films were investigated as a function of: (1) the number of PAH/PSS layers (layer thickness); (2) the charge on the outer layer of the polyelectrolyte multilayer film; and (3) the pH of microgel deposition solution. The resultant films were studied by differential interference contrast optical microscopy, atomic force microscopy, and scanning electron microscopy. It was found that the coverage of the microgels on the surface was a complex function of the pH of the deposition solution, the charge on the outer layer of the polyelectrolyte thin film and the PAH/PSS layer thickness; although it appears that microgel charge plays the biggest role in determining the resultant surface coverage.     

铅离子敏感N-异丙基丙烯酰胺共聚物微凝胶的制备

采用对N-异丙基丙烯酰胺-丙烯酸共聚微凝胶进行改性的方法合成了含苯并18-冠-6功能基团的PNIPAM微凝胶.红外和核磁光谱等手段证明苯并18-冠-6基团被引入到微凝胶中.改性后的微凝胶仍具有很好的温敏性,但是相转变温度由改性前的30℃提高到42℃,并且溶胀度也大大增加.在不控制离子强度的条件下微凝胶的粒径随Na+浓度增加而减小,但是随Pb2+浓度增加微凝胶粒径先减后增.在控制离子强度不变的条件下Na+浓度对微凝胶的粒径影响很小,但是随Pb2+浓度增加微凝胶粒径明显增大,显示较强的铅离子敏感性。     

Dual-stimuli responsive PNiPAM microgel achieved via layer-by-layer assembly: magnetic and thermoresponsive

We describe the synthesis, characterisation and surface-modification of magnetic nanoparticles and a poly(N-isopropylacrylamide) microgel, followed by the assembly and characterisation of magnetic nanoparticles on the microgel. To facilitate this deposition, the surface of the microgel is first modified via the layer-by-layer assembly of polyelectrolytes. One advantage of this concept is that it allows an independent optimization and fine tuning of the magnetic and thermoresponsive properties of individual components (nanoparticles and microgels) before assembling them so that the hybrid core-shell structure retains all the individual properties. The decisive parameter when exploiting the thermoresponsive and magnetic properties in such hybrid core-shell structures is the amount of heat transfer from the magnetic core onto the thermosensitive (loaded) microgel (for the subsequent heat-triggered release of drugs). Inductive heat study reveals that the heat generated by the magnetic nanoparticles is sufficient to cause the collapse of the microgel above its volume phase transition temperature. Successful confinement of positively and negatively charged magnetic nanoparticles between polyelectrolyte layers is achieved using the layer-by-layer deposition onto the microgel. Dynamic light scattering measurements show (i) the presence of each layer successfully deposited, (ii) the preservation of thermoresponsivity in the coated microgel, and (iii) that the magnetic nanoparticles do not get detached during the phase transition of the microgel. Electrophoresis measurements confirm charge reversal at every stage of layering of polycations, polyanions and magnetic nanoparticles. This unique combination of thermoresponsivity and magnetism opens up novel perspectives towards remotely controlled drug carriers.     

Visualizing the interaction between poly-L-lysine and poly(acrylic acid) microgels using microscopy techniques: effect of electrostatics and peptide size

The interaction between lightly cross-linked poly(acrylic acid) (pAA) microgels (50-150 microm in diameter) and poly-L-lysine (pLys) was studied as a function of pH, ionic strength, peptide size, and concentration. The swelling response and distribution of polypeptides within microgel particles was monitored by micromanipulator-assisted light microscopy and confocal laser scanning microscopy, while binding isotherms of pLys in the microgels were determined spectrophotometrically. Conformational changes of pLys were investigated by circular dichroism. The molecular weight of pLys was found to influence the degree of peptide-induced microgel deswelling, largely due to limitation of peptides larger than the effective network mesh size to penetrate the entire gel. Large peptides were concentrated within a surface layer of the gel particles, and at low ionic strength this dense surface layer was shown to act as a largely steric barrier for further penetration of compounds into the gel core. Small peptides, however, distributed evenly throughout the microgel particles and were able to create large microgel volume reductions. The deswelling of microgels increased with decreasing pH, while the uptake of pLys was significantly reduced at low pH. The effect of ionic strength on the interactions of pLys and oppositely charged pAA microgels was moderate and only pronounced for deswelling of gels at high pH. A significant increase in the alpha-helix content of pLys interacting with the oppositely charged microgels was observed for high molecular weight peptides, and the extent of alpha-helix formation was as expected more pronounced at high pH, i.e., at high charge density of the microgels but reduced charge density of the peptides.     

Unresolved issues in the preparation and characterization of thermoresponsive microgels

The preparation and properties of colloidal thermal responsive microgels based on poly(N-isopropylacrylamide) are described with an emphasis on the unresolved issues which will impair commercial implementation. The main difficulties are: 1) removal of sol, surfactants and other impurities; 2) obtaining colloidally stable particles less than 50 nm in diameter; 3) synthesis of concentrated, colloidally stable microgel dispersions; 4) accurate measurement of water content; and, 5) control of microgel particle morphology.     

Poly (N-Isopropylacrylamide) microgel-based optical devices for humidity sensing

Optical sensors for environmental humidity have been constructed from poly (N-isopropylacrylamide)-co-acrylic acid (pNIPAm-co-AAc) microgels. The devices were constructed by first depositing a monolithic layer of pNIPAm-co-AAc microgels on a Au-coated glass substrate followed by the addition of another Au layer on top. The resultant assembly showed visual color, and exhibited multipeak reflectance spectra. We found that the thickness of the device's microgel layer depended on environmental humidity, which corresponded to a change in the device's optical properties. Specifically, at low humidity the microgel layer was collapsed, while it absorbed water from the atmosphere (and swelled) as the humidity increased. Additionally, we investigated how the deposition of the hygroscopic polymer poly (diallyldimethylammonium chloride) (pDADMAC) onto the microgel layer (prior to final Au layer deposition) influenced the devices humidity response. We found that the devices were more sensitive to humidity as the number of pDADMAC layers in the device increased. Finally, we evaluated the device performance at various temperatures, and found that the sensitivity was enhanced at low temperature, although the response was more linear at elevated temperature.     

Drying Mechanism of Poly(N-isopropylacrylamide) Microgel Dispersions

The drying mechanism of poly(N-isopropylacrylamide) (pNIPAm) microgel dispersions was investigated. The microgels were synthesized by temperature-programmed aqueous free radical precipitation polymerization using NIPAm, N,N'-methylenebis(acrylamide), and water-soluble initiator. Drying processes of the microgel dispersions were observed with a digital camera and an optical microscope, and the resultant dried structures were observed by scanning electron microscopy. We found that the presence of the microgels changed the behavior of the drying process of water. In particular, the microgels were adsorbed at the air/water interface selectively within a few minutes irrespective of the microgel concentration. The relationship between the drying mechanism and structure of the resultant microgel thin film has been clarified by changing the microgel concentration of the dispersions.     

Hybrid microgels with reversibly changeable multiple brilliant color

We report reversibly color changeable hybrid microgels that tune multiple brilliant colors due to interparticle interactions of SPR using several structured nanoparticles. The interparticle interactions were brought out using the thermosensitive swelling/deswelling property of microgel. We employ N-isopropylacrylamide (NIPAM) and glycidyl methacrylate (GMA) copolymerized microgels (NG microgels) as templates for in situ synthesis of Au nanoparticles. The seed Au nanoparticles could be stably grown by successive reduction of Au and Ag in the microgels. Interestingly, the hybrid microgels were able to exhibit multiple brilliant colors by attaching Au/Ag multiple core/shell bimetallic nanoparticles in the microgels, and the color change reversibility of each hybrid microgel was accomplished by adjusting the nanoparticles' sizes. Obtained microgels shown in this study will find important applications such as in biomedical and electronic devices.     

Plum-pudding gels as a platform for drug delivery: understanding the effects of the different components on the diffusion behavior of solutes

The internal structure of composite gels made of responsive microgel particles inserted into a bulk hydrogel (N-isopropylacrylamide microgel particles in a cross-linked dimethylacrylamide matrix) has been investigated from the diffusion behavior of poly(ethylene glycol) (PEG) probes through the network, in the absence of specific interactions between the diffusing molecules and the system. The effect of the different components has been examined, for example, the size of the probe, the bulk structure, and the microgel nature. Particles were characterized prior to their insertion into the hydrogel in order to describe their properties as a function of size and cross-linker content, thus revealing different swelling behaviors. The biggest effects on the diffusion of the PEG probes were related to the bulk structure, and no major effects were registered by the addition of different microgels into the hydrogel network. We attempt to rationalize this behavior in terms of the composite gel structure and discuss the results in terms of their meaning for controlled drug delivery strategies.     

Photo-, thermally, and pH-responsive microgels

Microgels with photo-, thermally, and pH-responsive properties in aqueous suspension have been synthesized and characterized using dynamic light scattering and UV-visible spectroscopy. The new route involved first preparing poly(N-isopropylacrylamide) (PNIPAM)-allylamine copolymer microgels and a spiropyran photochrome (SP) bearing a carboxylic acid group. Then the functionalized spiropyran was coupled to the microgel via an amide bond. The dark-equilibrated gel particles feature spiropyran molecules in the polar, merocyanine form. After irradiation of visible light, the particle size becomes smaller because spiropyran changes to the relatively nonpolar, closed spiro form. The PNIPAM-SP microgels undergo a volume phase transition in water from a swollen state to a collapsed state with increasing temperature under all light conditions. However, the transition temperature range of the PNIPAM-SP is much broader than that for the PNIPAM without SP. The PNIPAM-SP microgels are monodisperse and self-assemble into a crystalline lattice while in suspension. The UV-visible spectra of an aqueous suspension of PNIPAM-SP microgel in the dark-adapted, merocyanine form showed both an absorption peak around 512 nm due to the merocyanine (giving a reddish color to the suspension) and two sharp peaks from Bragg diffraction of colloidal crystallites. Upon visible irradiation, the 512-nm band bleached significantly due to spiropyran photoisomerization. The spiropyran photoisomerization and accompanying color changes of the suspension were reversible upon alternating dark, UV, and visible light irradiation. Due to the residues of amine groups, the swelling capability of PNIPAM-SP microgels reduces as the pH value is changed from 7 to 10.     

Thermodynamic considerations of microgel swelling behavior

A simple but novel thermodynamic model is presented, based upon van't Hoff analysis, for the reversible swelling behavior of colloidal microgels. The swelling, as a function of temperature, of poly(N-isopropylacrylamide/N,N'-methylenebisacrylamide) as well as poly(N-isopropylacrylamide/vinylpyridine/N,N'-methylenebisacrylamide) and poly(N-isopropylacrylamide/acrylic acid/N,N'-methylenebisacrylamide) microgel dispersions in H2O and D2O has been studied by photon correlation spectroscopy (PCS). PCS data was used to obtain the hydrodynamic diameter and hence the volume of the microgels (before and after reconstitution following freeze-drying) as a function of temperature. The choice of standard reference states, for analyzing the data attained, is discussed, and the one selected is that of the volume of the microgels at 333 K in H2O. For all microgels examined the volume, at this temperature, is shown to be independent of solvent (H2O, D2O). The derived data has allowed the exploration of a novel thermodynamic approach to the study of the swelling behavior of the microgels. The constant volume, at 333 K, for each of the polymer systems constituting the microgels is suggested to be an intrinsic property of the polymers themselves.     

On the structure of poly(N-isopropylacrylamide) microgel particles

This investigation presents a study of the internal structure of poly(NIPAM/xBA) microgel particles (NIPAM and BA are N-isopropylacrylamide and N,N'-methylene bisacrylamide, respectively). In this study, x is the wt % of BA used during microgel synthesis. Two values of x were used to prepare the microgels, 1 and 10. The microgel dispersions were investigated using photon correlation spectroscopy (PCS) and small-angle neutron scattering (SANS). These measurements were made as a function of temperature in the range 30-50 degrees C. Scattering maxima were observed for the microgels when the dispersion temperatures were less than their volume phase transition temperatures. The SANS data were fitted using a model which consisted of Porod and Ornstein-Zernike form factors. The analysis showed that the macroscopic hydrodynamic diameter of the microgel particles and the submicroscopic mesh size of the network are linearly related. This is the first study to demonstrate affine swelling for poly(NIPAM/xBA) microgels. Furthermore, the mesh size does not appear to be strongly affected by x. The data suggest that the swollen particles have a mostly homogeneous structure, although evidence for a thin, low segment density shell is presented. The study confirms that poly(NIPAM/xBA) microgel particles have a core-shell structure. The shell has an average thickness of approximately 20 nm for poly(NIPAM/1BA) particles which appears to be independent of temperature over the range studied. The analysis suggests that the particles contained approximately 50 vol % water at 50 degrees C. The molar mass of the poly(NIPAM/1BA) microgel particles was estimated as 6 x 10(9) g mol(-1).