CBrCl3液芯光纤中的受激喇曼散射

以1.06μm调Q-锁模激光泵浦CBrCl_3液芯光纤,观察到11级受激喇曼散射,测量了各级受激喇曼散射的相对峰值功率及第9、10和11级的频谱.这种液芯光纤中的受激喇曼散射可作为获得2μm以上波段红外相干光的手段.     

双折射光纤受激喇曼散射的研究

本文详细地研究了双折射光纤的受激喇曼散射.观测到9级斯托克斯受激喇曼谱.文中讨论和测试了阈值和频移与泵浦光偏振方向间的关系;当泵浦光偏振方向与光纤椭圆核的长轴或短轴平行时的传输损耗.并根据测得的阈值在理论上计算了各级斯托克斯线的喇曼增益系数.     

苯乙醇液芯光纤受激喇曼散射的红移和蓝移展宽

本文首次用调QYAG激光器的倍频光(λ=532.1nm)在苯乙醇液芯光纤中产生受激喇曼散射,观察到了4阶斯托克斯线和2阶反斯托克斯线.讨论了引起红移为主的斯托克斯线展宽的原因.     

单模石英光纤中受激喇曼散射的研究

利用连续光纤激光器为泵浦源,对单模石英光纤中的受激喇曼散射进行了实验研究.在较低功率泵浦下,观察到由自发喇曼散射向受激喇曼散射演化的过程中,光谱不断变窄;当Stokes波信号功率较强时,观察到光谱峰值相对于泵浦波的频移量从440 cm－1转化到490 cm－1.在改进耦合系统后,不仅观察到一级喇曼频移,并且观察到了高阶Stokes光.在产生多级喇曼光谱时能量移动比较复杂,每两级的喇曼频移间隔并不完全相同.     

光纤中的受激喇曼散射及泵浦脉冲和斯托克斯脉冲的分离

本文报道在单模光纤中的受激喇曼散射的实验结果,用条纹相机测量了泵浦脉冲和喇曼斯托克斯脉冲时间上的相对延迟;结果表明,受激喇曼散射的喇曼斯托克斯脉冲大约在距光纤输入端一个分离距离的位置上形成。     

光纤中稳态受激喇曼散射弧波研究

本文结出了描述光纤中受激喇曼散射过程的方程,通过对这些方程的讨论,得到了在稳态受激喇曼散射过程中可以存在弧波解的结论.这一理论可用于超短脉冲的产生.     

单模光纤中受激喇曼散射对调制不稳定性的影响

基于修正的非线性薛定谔方程，利用线性扰动理论和数值方法研究了单模光纤中的调制不稳定性.由于受激喇曼散射的作用，使得喇曼增益谱叠加到光纤中的调制不稳定性增益谱上.这样，原本调制稳定的光纤正常色散区也出现了调制不稳定性；而在反常色散区，随着初始功率的增加，常规的调制不稳定性增益谱的增益和频谱范围均增大，而喇曼增益谱的增益增大但其频谱范围基本不变，这样导致常规的不稳定区域逐渐侵入并最终掩盖喇曼增益区.数值模拟验证了解析结果的正确性，并证明了利用反常色散情形下的调制不稳定性可以产生超短脉冲序列，但这种脉冲序列的进一步传输将会出现喇曼孤子自频移现象.     

受激喇曼散射在掺铒光纤放大器中的影响

本文在分析了均匀掺杂分布式光纤放大器(d－EDFA)的基础上,提出了沿传输方向掺杂浓度单调下降(单变),和降升结合(两变)的两种渐变型分布式光纤放大器,并用传输方程研究了透明传输和最佳掺杂浓度下,受激喇曼散射对均匀、单变和两变型三种d－EDFA的各种特性的影响.     

受激喇曼散射在掺铒光纤放大器中的影响

本文在分析了均匀掺杂分布式光纤放大器（d－EDFA）的基础上，提出了沿传输方向掺杂浓度单调下降（单变），和降升结合（两变）的两种渐变型分布式光纤放大器，并用传输方程研究了透明传输和最佳掺杂浓度下，受激喇曼散射对均匀、单变和两变型三种d－EDFA的各种特性的影响．     

光纤中强受激喇曼散射时的自相位调制

在光纤-光栅对激光脉冲压缩中,由于受激喇曼散射和自相位调制的竞争,使得泵浦激光脉冲波形重整,且自相位调制谱极不对称。本文用2m的单模保偏光纤,在产生较强的受激喇曼散射的情况下,得到较为对称的泵浦激光的自相位调制功率谱,并讨论了自相位调制功率谱的一些特点。     

Optimization of core size in erbium doped holey fiber amplifiers

Holey fibers (HFs) can be used as amplifier in optical communication systems. These new fiber structures have flexibility to change the fiber parameters such as refractive index of guided mode, air filling factor (AFF), V number, group velocity dispersion (GVD) and numerical aperture, only by the change of the hole size and air-hole spacing. In this paper we will use improved fully vectorial effective index method (IFEIM) to analyze the erbium doped holey fiber amplifier (EDHFA) with hexagonal unit cell. The range that core size can change in any air-hole spacing will determine and the growth of core size in the amplifier character such as maximum gain and optimum length will study. By determination of single mode region the effect of pump power and dopant concentration growth, on the amplifier parameter will define.     

Electrical switching in germanium telluride glasses doped with Cu and Ag

Electrical switching in germanium telluride glasses containing metallic atoms (Cu and Ag) has been investigated. All these glasses are found to exhibit memory switching. The switching fields of these glasses are compared with the thermal parameters evaluated from DSC studies and the results are explained on the basis of the thermal model. The composition dependence of the switching field and the thermal parameters show interesting variations at the critical compositions which correspond to the rigidity percolation and the chemical thresholds of these glasses. Received: 11 January 1999 / Accepted: 14 April 1999 / Published online: 14 July 1999     

Black-light continuum generation in a silica-core photonic crystal fiber

We report the observation of a broadband continuum spanning from 350 to 470 nm in the black-light region of the electromagnetic spectrum as a result of picosecond pumping a solid-core silica photonic crystal fiber at 355 nm. This was achieved despite strong absorption and a large normal dispersion of silica glass in the UV. Further investigations reveal that the continuum generation results from the interplay of intermodally phase-matched four-wave mixing and cascaded Raman scattering. We also discuss the main limitations in terms of bandwidth and power due to temporal walk-off, fiber absorption, and the photo darkening effect, and we suggest simple solutions.     

一种掺钕光纤激光器与倍频技术实现的数值模拟

从双包层光纤激光器的速率方程和光传输方程出发，建立数学模型，进行数值计算并对掺钕光纤激光器输出功率沿光纤的分布以及不同光纤长度下抽运功率和输出功率沿光纤的分布进行了数值模拟。以808nm半导体激光器为抽运源，掺钕双包层光纤为增益介质，并以KTP作为倍频晶体，计算并模拟其倍频效率和相位匹配角。最后，对光纤激光器及其倍频的实现进行了模拟研究。结果表明，该光纤激光器能够高效率地实现可见光输出。     

Tunable comb-filter using thermally expanded core fiber and ytterbium doped fiber and its application to multi-wavelength fiber laser

We constructed a novel tunable comb-filter by splicing a commercial Yb³⁺ doped fiber (YDF) between 2 thermally expanded core (TEC) fibers at their core-expanded ends. This structure forms an all-fiber Mach-Zehnder interferometer due to the interference between the core mode and the cladding modes of the YDF. The interference fringes shifts to the longer wavelength region as the YDF is pumped by a 980 nm laser diode (LD). We then demonstrated application of this newly proposed tunable comb-filter to a SOA-based ring laser and obtained multi-wavelength lasing. The lasing wavelengths can be also tuned by pumping the YDF in the proposed comb-filter.     

Random distributed feedback fiber laser pumped by an ytterbium doped fiber laser

A random distributed feedback fiber laser operating at 1115 nm has been demonstrated experimentally in standard communication optical fibers by using a LD-pumped Yb-doped fiber laser as the pump source. We have studied the effect of different fiber spans on this new type of random fiber laser output power. It is shown that the generation power is the highest up to 198 mW in a 50 km fiber span. The slope efficiency is more than 28.7%. Stable, high-power continuous-wave (CW) lasing can be generated when the pump power is 3.6 W. The threshold power has also been calculated which well proves a random fiber laser operating via Rayleigh scattering, amplified through the Raman scattering.     

Intensity based erbium distribution for erbium doped fiber amplifiers

A method to calculate an optimum Erbium distribution to enhance the gain efficiency in EDFA is proposed. This method calculates Erbium distribution based on optical pump envelop, pump power and optical properties of Erbium ion. The intensity-based Erbium distribution is obtained for single-mode fiber and dispersion-shifted fiber types EDFA for pump power from 10 to 40 mW. All of the profiles have a Gaussian-like shape. For single-mode fiber type EDFA, high gain enhancement is obtained in a relatively short optimal length of fiber. Optimal length of EDFA, using intensity-based Erbium distribution, is increased by a factor of 1.5–3 with respect to the one using stepwise. This optimal length increasing factor is considerably smaller than that of the EDFA, using the one-fourth confinement Erbium profile.     

石英基掺Tm3+包层抽运光纤激光器

在MCVD车床上利用“湿法”掺杂方法研制出纤芯高掺Ge的石英基掺Tm³⁺光纤预制棒,采用侧面研磨和抛光工艺制成横截面为正六边形的光纤预制棒.经拉丝,内层涂覆低折射率材料后制成包层抽运光纤.测试其吸收谱,并对光纤参数进行优化.通过在光纤两端紫外写入光纤Bragg光栅,制成线形光学谐振腔,在工作波长793nm的激光抽运下,获得工作波长1947.1031nm、功率2.05W的激光输出.由此证明这种光纤具有优异的光学特性. 关键词： 3+光纤')" href="#">石英基掺Tm³⁺光纤 光纤Bragg光栅 包层抽运 光纤激光器