Vibrational spectra of the dithieno[3,2-b: 2′,3′-d] thiophene crystal

A normal mode analysis of dithieno[3,2-b:2′,3′-d]thiophene crystal was carried out using an intramolecular force field refined for the isolated molecule and an intermolecular potential described in terms of interactions among non-bonded atoms. Infrared and Raman data for internal and lattice vibrations are reported, including those for a deuterated isotopomer, which are satisfactorily accounted for by frequency calculations. Cartesian displacements for each normal mode of the isolated molecule are presented and frequency splittings and shifts analysed through calculations at k = 0 which include all crystal vibrational degrees of freedom.     

New convenient synthesis of substituted 6,9-dihydropyrido[3′,2′:4,5]thieno[3,2-b]pyridines and 6,9-dihydropyrido[3′,2′:4,5]thieno[3,2-d]pyrimidines

1,4-Dihydro-3-cyano-2-pyridinethiolates react with 2-bromo-l-(4-bromophenyl)ethylidenemalononitrile or N-cyanochloracetanudine to give 6, 9-dihydropyrido[3, 2': 4, 5]thieno[3. 2-b]pyridines or 6, 9-dihydropyrido-[3.2:4.5Jthieno(3,2-d]pyrimidines, respectively.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 4, pp. 553–556, April, 1996.     

Thieno[2,3-b]pyridine-2-carbohydrazide in Polyheterocyclic Synthesis: The Synthesis of Pyrido[3′,2′:4,5]thieno[3,2-d]pyrimidine,Pyrido[3′,2′:4,5]thieno[3,2-d][1,2,3]triazine,and Pyrazolyl,Oxadiazolylthieno[2,3-b]pyridine Derivatives

Pyrdine-2(1H)-thione 1 reacted with ethyl chloroacetate 2 to give 2-S-ethoxy-carbonylmethylpyridine derivative 3, which could be cyclized into thieno[2,3-b]-pyridine-2-carbohydrazide derivative 5 by boiling with hydrazine hydrate. The latter compound reacted with cinnamonitrile derivatives 6a, b, triethylorthoformate, formic acid, dimethylformamide-dimethylacetal, and diethyl carbonate to give the corresponding shiff base 7a, b and pyrido[3′,2′;-4,5]thieno[3,2-d]pyrimidine derivatives 10–13 in respective manner. On the other hand, compound 5 also reacted with carbondisulphide and phenyl isothiocyanate to afford the corresponding 2-(1,3,4-oxadiazolo-2-yl)thieno[2,3-b]pyridine derivatives 18 and 22. Finally, compound 5 reacted with some β-dicarbonyl compounds, such as ethyl acetoacetate, acetylacetone and ethyl β-arylazoacetoacetate, to yield the corresponding 2-(pyrazol-1-yl-carbonyl)thieno[2,3-b]pyridine derivatives 24, 25, and 27 respectively.     

Synthesis and photochromic reactivity of a new class of photochromic diarylethene dimer-containing dithieno[3,2-b:2′3′-d]thiophene

Novel photochromic diarylethene dimers containing dithieno[3,2-b:2′3′-d]thiophene were synthesized and their photochromic properties were studied in solution as well as in the crystalline phase. Only the isomer with the diarylethene units one in open-form and one in closed-form was produced upon irradiation with ultraviolet light because of the intramolecular excitation energy transfer in this isomer. Their electrochemical properties were also investigated associating with computational studies.     

One-Pot Synthesis of Thieno[2,3-b]pyridine and Pyrido[3′,2′:4,5]thieno[3,2-d]pyrimidine Derivatives

Russian Journal of Organic Chemistry - 2-Acyl-4,5,6-trialkyl-3-aminothieno[2,3-b]pyridines,...     

A two-dimension medium band gap conjugated polymer based on 5,10-bis(alkylthien-2-yl)dithieno[3,2-d:3′,2′-d′]benzo[1,2-b:4,5-b′]dithiophene: Synthesis and photovoltaic application

A two-dimension medium band gap copolymer poly{5,10-bis(4,5-didecylthien-2-yl)dithieno[2,3-d:2′,3′-d′]benzo[1,2-b:4,5-b′]dithiophene-2,7-diyl-alt-2,5-di(3-octylthien-2-yl) thiophen-5,5′-diyl}, named as PDTBDT-T-3T, was prepared by the palladium-catalyzed Stille cross coupling reaction and characterized. The resulting polymer exhibits good solubility in common organic solvents, excellent thermal stability, and extensive light absorption from 300 nm to 650 nm with an optical band gap of 1.92 eV, the highest occupied molecular orbital (HOMO) level of ?5.03 eV and the hole mobility up to 1.92 × 10^?4 cm²·V^?1·s^?1. The power conversion efficiencies (PCEs) of 2.02%–3.19% have been achieved in the traditional PVCs for the copolymer. It should be noted that the PCEs of 4.2% for the inverted PVCs from the copolymer with PFN (poly[(9,9-bis(3′-(N,N-dimethylamino)propyl)-2,7-fluorene)-alt-2,7-(9,9-dioctyl- fluorene)]) as cathode modifying interlayer, were similar with the PCEs of 4.39% for the inverted PVCs from P3HT:PC₇₁BM at the same condition. These results indicated that the copolymer could be used as potential candidate for P3HT.     

Alkylation of pyrimido[5′,4′:5,6]pyrido[3,2-b]indol-4-one derivatives

Alkylation of 11-benzyl-3,11-dihydro-4H-pyrimido[5′,4′:5,6]pyrido[3,2-b]indol-4-one with methyl iodide and methyl bromoacetate in DMF gave 3-alkylpyrimidopyridoindolones as the corresponding salts. The reaction in acetone in the presence of K₂CO₃ yielded 3,6-disubstitution products. Alkylation with DMF dimethyl acetal gave a mixture of the 3- and 6-alkylpyrimidopyridoindol-4-one bases. The structure of 4-oxo-4,6-dihydro-3H-pyrimido-[5′,4′:5,6]pyrido[3,2-b]indol-11-ium chloride (3b) was proved by X-ray diffraction analysis.     

Synthesis of thiopyrano[4″,3″:4′,5′]pyrido[3′,2′:4,5]furo[3,2-d]pyrimidines

<正>Reactions of the 6-hydroxy-thiopyrano[3,4-c]pyridine-5-carbonitrile derivative 1 withα-halo-carbonyl compounds gave the ortho-substituted intermediates 2a-c which were converted into furo[2,3-b]thiopyrano[4,3-d]pyridines 3a-c by fusion of a furan moiety under basic conditions.Further cyclization of 3a-c led to a fusion of a pyrimidine ring,yielding the tetracyclic products 6,7 and 8.In addition,condensation of 6 with various aromatic aldehydes afforded the corresponding imines 9a,b.Mannich reaction of 7 gave products 10a,b.     

Synthesis of new pyridazino[4′,3′:4,5]-thieno[3,2-d]-1,2,3-triazine and pyrimido[4′,5′:4,5]thieno[2,3-c]pyridazine derivatives

Summary 8,9-Diphenylpyridazino[4,3:4,5]thieno[3,2-d]-1,2,3-triazin-4(3H)-one (2), 3-substituted 8,9-diphenylpyridazino[4,3:4,5]thieno[3,2-d]-1,2,3-triazin-4(3H)-ones (3a–c), 3,4-diphenylpyrimido[4,5:4,5]thieno[2,3-c]pyridazin-8(7H)-one (4), 8-chloro-3,4-diphenylpyrimido[4,5:4,5]thieno[2,3-c]pyridazine (5), 8-substituted 3,4-diphenylpyrimido[4,5:4,5]thieno[2,3-c]pyridazines (6a–h) and 7-substituted 3,4-diphenylpyrimido[4,5:4,5]thieno[2,3-c]pyridazin-8(7H)-ones(7a–c) were synthesized from 5-amino-3,4-diphenylthieno[2,3-c]pyridazine-6-carboxamide (1).

---

Synthese neuer Pyridazino[4,3:4,5]thieno[3,2-d]-1,2,3-triazin-und Pyrimido[4,5:4,5]thieno[2,3-c]pyridazin-Derivate

Zusammenfassung Folgende Verbindungen wurden ausgehend von 5-Amino-3,4-diphenylthieno[2,3-c]pyridazin-6-carboxamid (1) synthetisiert: 8,9-Diphenylpyridazino[4,3:4,5]thieno[3,2-d]-1,2,3-triazin-4(3H)-on (2), 3-substituierte 8,9-Diphenylpyridazino[4,3:4,5]thieno[3,2-d]-1,2,3-triazin-4(3H)-one (3a–c), 3,4-Diphenylpyrimido[4,5:4,5]thieno[2,3-c]pyridazin-8[7H]-on (4), 8-Chlor-3,4-diphenylpyrimido[4,5:4,5]thieno[2,3-c]pyridazin (5), 8-substituierte 3,4-Diphenylpyrimido[4,5:4,5]thieno[2,3-c]pyridazine (6a–h) und 7-substituierte 3,4-Diphenylpyrimido[4,5:4,5]thieno[2,3-c]pyridazin-8(7H)-one (7a–c).

     

Synthesis of derivatives of pyrido[3′,2′:4,5]furo[3,2-c]isoquinoline heterocyclic system

An approach to the synthesis of derivatives of new heterocyclic system, pyrido[3′,2′:4,5]-furo[3,2-c]isoquinoline, was suggested. A condensation reaction of substituted 3-cyanopyridin-2(1H)-ones with methyl 2-(chloromethyl)benzoate and subsequent treatment of the condensation product with potassium tert-butoxide leads to substituted pyrido[3′,2′:4,5]furo[3,2-c]-isoquinolin-5(6H)-ones. Similarly, a condensation reaction of substituted 3-cyanopyridin-2(1H)-ones with 2-(chloromethyl)benzonitrile and subsequent treatment of the condensation product with potassium tert-butoxide gives substituted 5-aminopyrido[3′,2′:4,5]furo[3,2-c]-isoquinolines.     

Synthesis of benzothieno[2,3-b]thiophenes, [2,3-b:3′,2′-d]-dithienothiophenes and their selenium derivatives via electrophilic cyclization and McMurry cyclization

Benzothieno[2,3-b]thiophenes, [2,3-b:3′,2′-d]-dithienothiophenes, and their selenium derivatives were synthesized in good yields from readily available 3-ethynyllithio-benzo[b]thiophenyllithio compounds, sulfur or selenium, and 2 equiv of acid chlorides. Two heteroarene rings were constructed by a twofold cyclization via an acid chloride-induced electrophilic ring closing and the McMurry cyclization using Zn/TiCl₄ reagents.     

Broadly Applicable Synthesis of Arylated Dithieno[3,2-b:2′,3′-d]pyrroles as Building Blocks for Organic Electronic Materials

A novel and versatile method for the N-arylation of dithieno[3,2-b:2′,3′-d]pyrrole (DTP) is presented. By Pd- or Cu-catalyzed coupling a variety of arenes and acenes were directly attached at the DTP−nitrogen yielding a variety of functionalized DTPs. Investigations on optical and redox properties led to valuable structure-property relationships, which were corroborated by quantum chemical calculations. Further functionalization and elongation of the conjugation of an acceptor-substituted DTP was elaborated to result in complex cruciform-type donor−acceptor oligomers, which were investigated and implemented in single material organic solar cells.     

Synthesis and photophysical properties of dinaphtho[2,3-b:2′,3′-i]dihydrophenazine derivatives

A dinaphtho[2,3-b:2′,3′-i]dihydrophenazine (DNP) derivative was synthesized by Buchwald-Hartwig cross-coupling, and its electronic spectrum was compared with that of dinaphtho[b,i]dihydrophenazine-5,18-dione (DNP-dione) as an anthraquinone analog. An absorption band of DNP is attributed to extension of π-conjugation over the entire molecule via the N atom. DNP-dione showed a broad absorption band in the range 450–490?nm due to intramolecular charge-transfer interactions. Additionally, the absolute fluorescence quantum yield of DNP was larger than that of DNP-dione. DNP-dione exhibited reversible oxidation peaks and a similar oxidation potential to DNP, since there are very weak electronic interactions between the anthracene and anthraquinone units across the N atoms with the 4-octyloxyphenyl substituent.     

<Emphasis Type="Italic">N</Emphasis>-Benzoyl dithieno[3,2-b:2′,3′-d]pyrrole-based hyperbranched polymers by direct arylation polymerization

Background

Although poly(N-acyl dithieno[3,2-b:2′,3′-d]pyrrole)s have attracted great attention as a new class of conducting polymers with highly stabilized energy levels, hyperbranched polymers based on this monomer type have not yet been studied. Thus, this work aims at the synthesis of novel hyperbranched polymers containing N-benzoyl dithieno[3,23,2-b:2′,3′-d]pyrrole acceptor unit and 3-hexylthiophene donor moiety via the direct arylation polymerization method. Their structures, molecular weights and thermal properties were characterized via ¹H NMR and FTIR spectroscopies, GPC, TGA, DSC and XRD measurements, and the optical properties were investigated by UV–vis and fluorescence spectroscopies.

Results

Hyperbranched conjugated polymers containing N-benzoyl dithieno[3,23,2-b:2′,3′-d]pyrrole acceptor unit and 3-hexylthiophene donor moiety, linked with either triphenylamine or triphenylbenzene as branching unit, were obtained via direct arylation polymerization of the N-benzoyl dithieno[3,23,2-b:2′,3′-d]pyrrole, 2,5-dibromo 3-hexylthiophene and tris(4-bromophenyl)amine (or 1,3,5-tris(4-bromophenyl)benzene) monomers. Organic solvent-soluble polymers with number-average molecular weights of around 18,000 g mol^?1 were obtained in 80–92% yields. The DSC and XRD results suggested that the branching structure hindered the stacking of polymer chains, leading to crystalline domains with less ordered packing in comparison with the linear analogous polymers. The results revealed that the hyperbranched polymer with triphenylbenzene as the branching unit exhibited a strong red-shift of the maximum absorption wavelength, attributed to a higher polymer stacking order as a result of the planar structure of triphenylbenzene.

Conclusion

Both hyperbranched polymers with triphenylamine/triphenylbenzene as branching moieties exhibited high structural order in thin films, which can be promising for organic solar cell applications. The UV–vis absorption of the hyperbranched polymer containing triphenylbenzene as branching unit was red-shifted as compared with the triphenylamine-containing polymer, as a result of a higher chain packing degree.

Open image in new window

     

Exploration of nonlinear optical behavior in asymmetric dithieno [3,2b:2′,3′d] pyrrole based push pull constrain: A theoretical approach

The organic compounds with end-capped acceptors obtained much consideration in optoelectronic field owing to their promising electronic properties. Herein, a series of PTMD1-PTMD6 conjugated compounds having D-π-A architecture were designed via structural tailoring including end-capped acceptors in non-fullerene compound (PTMR). The PTMR and its designed compounds were used at M06/6-311G(d,p) level for their optimization analysis and subsequently, by using optimized geometries to perform non-linear optical (NLO), frontier molecular orbitals (FMOs) and natural bond orbitals (NBOs) analyses. The quantum chemical investigations revealed that all the designed compounds showed significant reduction in band gaps with the range of 1.467–1.880 eV in comparison to PTMR (2.308 eV). The band gaps were found as PTMR (2.308) > PTMD6 (1.880) > PTMD1 (1.752) > PTMD2 (1.693) > PTMD4 (1.532) > PTMD5 (1.514) > PTMD3 (1.467) with eV in the descending order. Further, density of states (DOS) supported the results of FMOs study, consequently, according to transition density matrix (TDMs), the designed chromophores (PTMD1-PTMD6) displayed the transmission of charge effectively. The PTMD3 showed the maximum value of λ_max at 764.627 nm as compared to all the designed derivatives with greater bathochromic shift. The compound PTMD3 showed the highest values of β_tot and < γ > among all the studied compounds i.e., 7.695 × 10^-27 and 1.776 × 10^-31 esu, respectively. According to theoretical investigation, the structural modification with different acceptor moieties played an important role in the context of desirable NLO materials for optoelectronic applications.     

SYNTHESIS AND ANTIMICROBIAL ACTIVITY OF SOME NEW PYRIDO[3′,2′:4,5]THIENO[3,2-d]- PYRIMIDINE DERIVATIVES

5-Acetyl-3-amino-4-aryl-6-methylthieno[2,3-b]pyridine-2-carboxamides (1a, b) were reacted with aromatic aldehydes or with some cycloalkanones to give the corresponding tetrahydropyridothienopyrimidinone derivatives 2a–f and 4a–d . The reaction of compound 1b with urea and/or carbon disulfide has been carried out and their products were identified. Some representative compounds were screened in vitro for their antimicrobial activities.     

Synthesis of 1,3,4-thiadiazolo[3′,2′∶1,2]pyrimidino[5,6-d]-1,3-thiazine derivatives

2-R-5-Imino-6H-1,3,4-thiadiazolo[3,2-a]pyrimidin-7-ones react with aromatic and heterocyclic aldehydes in the presence of Et₃N to give condensation products on the methylene group, which react with carbon disulfide to yield the corresponding 2,6-disubstituted 8-thioxo-9,9a-dihydro-1,3,4-thiadiazolo[3′,2′∶1,2]pyrimidino[5,6-d]1,3-thiazin-5-ones. Deceased. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 366–368, February, 1999.     

Syntheses with heterocyclic β-enaminonitriles: A facile preparation of polyfunctionally substituted thiophene,thieno[3,2-b]pyridine and thieno[3,2-d]pyrimidine derivatives

Summary A convenientGewald synthesis of 3,5-diaminothiophene-2-carbonitrile derivatives (2) is reported. The synthetic potential of the -enaminonitrile moiety in2 has been explored; it proved to be a promising candidate for the synthesis of polyfunctionally substituted thieno[3,2-b]pyridines and thieno[3,2-d]pyrimidines.

---

Synthesen mit heterocyclischen -Enaminonitrilen: Eine einfache Methode zur Herstellung polyfunktionell substituierter Thiophen-, Thieno[3,2-b]pyridin- und Thieno[3,2-d]pyrimidinderivate

Zusammenfassung Eine bequeme Methode zur Herstellung von 3,5-Diaminothiophen-2-carbonitril-Derivaten (2) nachGewald wird vorgestellt. Das synthetische Potential der -Enaminonitrilfunktion von2 wurde untersucht.2 ist ein geeignetes Ausgangsmaterial für die Synthese polyfunktionell substituierter Thieno[3,2-b]pyridine und Thieno[3,2-d]pyrimidine.

     

Synthesis and antitumor evaluation of novel tetrahydrobenzo[4′,5′]thieno[3′,2′:5,6]pyrimido[1,2-b]isoquinoline derivatives

In the present study, a novel 8,9,10,11-tetrahydro-7H,14H-benzo[4′,5′] thieno[2′,3′:4,5]-1,3-oxazino[3,2-b]isoquinoline-7,14-dione 5 was prepared by condensation of 2-amino-3-carbethoxy-4,5,6,7-tetrahydrobenzothiophene with homophthalic anhydride under microwave irradiation, followed by alkaline hydrolysis and cyclization using acetyl chloride. Compound 5 was further allowed to react with different nitrogen nucleophiles to get new tetrahydrobenzothienopyrimido isoquinolinone derivatives. The structures of the prepared compounds were elucidated by IR, ¹H-NMR, ¹³C-NMR, and mass spectroscopy. The newly prepared compounds were tested in vitro against a panel of two human tumor cell lines, namely, hepatocellular carcinoma (liver) HepG2, and mammary gland breast MCF-7. Almost all the tested compounds showed satisfactory activity.     

3-Aminothieno[2,3-b]pyridine-2-carboxylate: Effective precursor for microwave-assisted three components synthesis of new pyrido[3′,2′:4,5]thieno[3,2-d]pyrimidin-4(3H)-one hybrids

In this study, ethyl 3-aminothieno[2,3-b]pyridine-2-carboxylate was taken as a versatile precursor for the one-pot three-component synthesis of related fused pyrimidine hybrids. The tandem protocol involved the reaction of 3-aminothieno[2,3-b]pyridine, dimethylformamide-dimethylacetal, and amines. The reaction afforded a new series of the target pyrimidine hybrids, linked to different arene units, in good to excellent yields. The prior reaction was evaluated in different solvents under traditional heating or microwave irradiation. Moreover, the influence of reaction temperature was also examined. The optimal conditions were obtained under microwave irradiation in dioxane at 110°C for 40 to 60 min. Additionally, by repeating the previous tandem reaction using the appropriate amines at reaction times of 20 to 60 min, a new series of pyrimidine hybrids linked to alkyl, arylthiazole, and benzo[d]thiazole units has been prepared in good to excellent yields. Furthermore, the utility of bis(amines) was examined to conduct the synthesis of new bis(pyrimidine) hybrids linked to aliphatic cores, in excellent yields, using the same protocol at 30 min reaction time.