The 2‐Arsaethynolate Anion: Synthesis and Reactivity Towards Heteroallenes

The synthesis and isolation of the 2‐arsaethynolate anion, AsCO^?, and its subsequent reactivity towards heteroallenes is reported. Reactions with ketenes and carbodiimides afford four‐membered anionic heterocycles in formal [2+2] cycloaddition reactions. By contrast, reaction with an isocyanate yielded a 1,4,2‐diazaarsolidine‐3,5‐dionide anion and the unprecedented cluster anions As₁₀^2? and As₁₂^4?. These preliminary reactivity studies hint at the enormous potential synthetic utility of this novel anion, which may be employed as an arsenide (As^?) source.     

Reactivity of Liquid Ammonia Solutions of the Zintl Phase K12Sn17 towards Mesitylcopper(I) and Phosphinegold(I) Chloride

To gain more insight into the reactivity of intermetalloid clusters, the reactivity of the Zintl phase K₁₂Sn₁₇, which contains [Sn₄]^4? and [Sn₉]^4? cluster anions, was investigated. The reaction of K₁₂Sn₁₇ with gold(I) phosphine chloride yielded K₇[(η²‐Sn₄)Au(η²‐Sn₄)](NH₃)₁₆ ( 1 ) and K₁₇[(η²‐Sn₄)Au(η²‐Sn₄)]₂(NH₂)₃(NH₃)₅₂ ( 2 ), which both contain the anion [(Sn₄)Au(Sn₄)]^7? ( 1 a ) that consists of two [Sn₄]^4? tetrahedra linked through a central gold atom. Anion 1 a represents the first binary Au?Sn polyanion. From this reaction, the solvate structure [K([2.2.2]crypt)]₃K[Sn₉](NH₃)₁₈ ( 3 ; [2.2.2]crypt=4,7,13,16,21,24‐hexaoxa‐1,10‐diazabicyclo[8.8.8]hexacosane) was also obtained. In the analogous reaction of mesitylcopper with K₁₂Sn₁₇ in the presence of [18]crown‐6 in liquid ammonia, crystals of the composition [K([18]crown‐6)]₂[K([18]crown‐6)(MesH)(NH₃)][Cu@Sn₉](thf) ( 4 ) were isolated ([18]crown‐6=1,4,7,10,13,16‐hexaoxacyclooctadiene, MesH=mesitylene, thf=tetrahydrofuran) and featured a [Cu@Sn₉]^3? cluster. A similar reaction with [2.2.2]crypt as a sequestering agent led to the formation of crystals of [K[2.2.2]crypt][MesCuMes] ( 5 ). The cocrystallization of mesitylene in 4 and the presence of [MesCuMes]^? ( 5 a ) in 5 provides strong evidence that the migration of a bare Cu atom into an Sn₉ anion takes place through the release of a Mes^? anion from mesitylcopper, which either migrates to another mesitylcopper to form 5 a or is subsequently protonated to give MesH.     

B−B Bond Nucleophilicity in a Tetraaryl μ‐Hydridodiborane(4) Anion

The tetraaryl μ‐hydridodiborane(4) anion [ 2 H]^? possesses nucleophilic B?B and B?H bonds. Treatment of K[ 2 H] with the electrophilic 9‐H‐9‐borafluorene (HBFlu) furnishes the B₃ cluster K[ 3 ], with a triangular boron core linked through two BHB two‐electron, three‐center bonds and one electron‐precise B?B bond, reminiscent of the prominent [B₃H₈]^? anion. Upon heating or prolonged stirring at room temperature, K[ 3 ] rearranges to a slightly more stable isomer K[ 3 a ]. The reaction of M[ 2 H] (M⁺=Li⁺, K⁺) with MeI or Me₃SiCl leads to equimolar amounts of 9‐R‐9‐borafluorene and HBFlu (R=Me or Me₃Si). Thus, [ 2 H]^? behaves as a masked [:BFlu]^? nucleophile. The HBFlu by‐product was used in situ to establish a tandem substitution‐hydroboration reaction: a 1:1 mixture of M[ 2 H] and allyl bromide gave the 1,3‐propylene‐linked ditopic 9‐borafluorene 5 as sole product. M[ 2 H] also participates in unprecedented [4+1] cycloadditions with dienes to furnish dialkyl diaryl spiroborates, M[R₂BFlu].     

The fragmentations of [M-H]- anions derived from underivatised peptides. The side-chain loss of H2S from Cys. A joint experimental and theoretical study

Loss of H₂S is the characteristic Cys side‐chain fragmentation of the [M? H]^? anions of Cys‐containing peptides. A combination of experiment and theory suggests that this reaction is initiated from the Cys enolate anion as follows: RNH‐^?C(CH₂SH)CONHR′ Ø [RNHC(?CH₂)CONHR′ (HS^?)] Ø [RNHC(?CH₂)CO‐HNR′‐H]^?+H₂S. This process is facile. Calculations at the HF/6‐31G(d)//AM1 level of theory indicate that the initial anion needs only ≥20.1 kcal mol^?1 of excess energy to effect loss of H₂S. Loss of CH₂S is a minor process, RNHCH(CH₂SH)CON^?‐R′ Ø RNHCH(CH₂S^?)CONHR′ Ø RNH ^?CHCONHR+CH₂S, requiring an excess energy of ≥50.2 kcal mol^?1. When Cys occupies the C‐terminal end of a peptide, the major fragmentation from the [M–H]^? species involves loss of (H₂S+CO₂). A deuterium‐labelling study suggests that this could either be a charge‐remote reaction (a process which occurs remote from and uninfluenced by the charged centre in the molecule), or an anionic reaction initiated from the C‐terminal CO₂^? group. These processes have barriers requiring the starting material to have an excess energy of ≥79.6 (charge‐remote) or ≥67.1 (anion‐directed) kcal mol^?1, respectively, at the HF/6‐31G(d)//AM1 level of theory. The corresponding losses of CH₂O and H₂O from the [M? H]^? anions of Ser‐containing peptides require ≥35.6 and ≥44.4 kcal mol^?1 of excess energy (calculated at the AM1 level of theory), explaining why loss of CH₂O is the characteristic side‐chain loss of Ser in the negative ion mode. Copyright © 2003 John Wiley & Sons, Ltd.     

Crystallographic report: Tetraphenylphosphonium nitratobis (chlorodiphenylstannate)methane, [Ph4P]+[(Ph2ClSn)2CH2 ·NO3]−

The nitrate anion coordinates to the Sn? CH₂? Sn unit of the title phosphonium stannate, [Ph₄P]⁺ [(Ph₂ClSn)₂CH₂ ·NO₃]^?, to give a six‐membered ring having the penta‐coordinated tin atoms in a trigonal bipyramidal geometry. Copyright © 2003 John Wiley & Sons, Ltd.     

Organotin–Oxido Cluster‐Based Multiferrocenyl Complexes Obtained by Hydrolysis of Ferrocenyl‐Functionalized Organotin Chlorides

Three organotin–oxido clusters were formed by hydrolysis of ferrocenyl‐functionalized organotin chloride precursors in the presence of NaEPh (E=S, Se). [R^FcSnCl₃?HCl] ( C ; R^Fc = CMe₂CH₂C(Me)?N?N?C(Me)Fc) and [SnCl₆]^2? formed {(R^FcSnCl₂)₃[Sn(OH)₆]}[SnCl₃] ( 3 a ) and {(R^FcSnCl₂)₃[Sn(OH)₆]}[PhSeO₃] ( 3 b ), bearing an unprecedented [Sn₄O₆] unit, in a one‐pot synthesis or stepwise through [(R^FcSnCl₂)₂Se] ( 1 ) plus [(R^FcSnCl₂)SePh] ( 2 ). A one‐pot reaction starting out from FcSnCl₃ gave [(FcSn)₉(OH)₆O₈Cl₅] ( 4 ), which represents the largest Fc‐decorated Sn/O cluster reported to date.     

Aluminium‐Mediated Carbon Dioxide Reduction by an Isolated Monoalumoxane Anion

The deoxygenative conversion of carbon dioxide to carbon monoxide is promoted by the aluminyl anion [Al(NON^Ar)]^? (NON^Ar=[O(SiMe₂NAr)₂]^2?, Ar=2,6‐iPr₂C₆H₃). The reaction proceeds via the isolable monoalumoxane anion [Al(NON^Ar)(O)]^?, containing a terminal aluminum‐oxygen bond. This species reacts with a second equivalent of carbon dioxide to afford the carbonate [Al(NON^Ar)(CO₃)]^?, and with nitrous oxide to generate the hyponitrite anion, [Al(NON^Ar)(κ²O,O′‐N₂O₂)]^?.     

Energy dependence of the fragmentation of ester enolate ions

The energy dependence of the fragmentation of a selection of ester enolate ions has been studied by variable, low-energy collision-induced dissociation experiments in the quadrupole collision cell of a hybrid BEQQ mass spectrometer. The dominant fragmentation reactions observed are where ΔH₁ ? ΔH₂=PA([RCCO]^?) ? PA([?O]^?) (PA=proton affinity). The anion of lowest proton affinity is formed preferentially at low internal energies with the yield of the anion of higher proton affinity increasing with increasing internal energy. The [CH₃OCOCOCH₂]^? anion derived from methyl pyruvate forms [CH₃OCO]^? by reaction (2); this anion readily fragments to [CH₃G]^?+ CO consistent with a structure represented by a dipole-stabilized cluster of [CH₃O]^? and CO. Comparison of the 8-keV with the 50-eV collision-induced dissociation mass spectra indicated that the average internal energy of the fragmenting ions is considerably lower in the high-energy collisional experiments than it is in the low-energy collisional experiments.     

A Stable Cyclic (R2SnAu)3 Anion Having In‐Plane σ‐Möbius Aromaticity

A cyclic (R₂SnAu)₃ anion ( 3^? , R₂Sn=2,2,5,5‐tetrakis(trimethylsilyl)‐1‐stannacyclopentane‐1,1‐diyl) has been synthesized as a stable blue salt with K⁺(THF)₆ through the reaction of stable dialkylstannylene 1 with R′₃PAuCl (R′=Et, Ph) followed by the reduction with KC₈. Crystallographic and NMR analysis shows that the six‐membered (SnAu)₃ ring of 3^? is planar and highly symmetric with an equal distance of six Au?Sn bonds. A UV/Vis spectrum of 3^? in hexane reveals an intense absorption maximum at 598 nm. While cyclic Au₃^? with four valence electrons is known as unstable anti‐aromatic anion, 3^? with three divalent tin ligands is stable σ aromatic anion with an unprecedented Möbius orbital array as predicted by the perturbation MO and CCSD analysis of 3^? .     

On the Nature of Bridging Metal Atoms in Intermetalloid Clusters: Synthesis and Structure of the Metal‐Atom‐Bridged Zintl Clusters [Sn(Ge9)2]4− and [Zn(Ge9)2)]6−

The addition of Sn and Zn ions to [Ge₉] clusters by reaction of [Ge₉]^4? with SnPh₂Cl₂, ZnCp*₂ (Cp*=pentamethylcyclopentadienyl), or Zn₂[HC(Ph₂P=NPh)₂]₂ is reported. The resulting Sn‐ and Zn‐bridged clusters [(Ge₉)M(Ge₉)]^q? (M=Sn, q=4; M=Zn, q=6) display various coordination modes. The M atoms that coordinate to the open square of a C_4v‐symmetric [Ge₉] cluster form strong covalent multicenter M?Ge bonds, in contrast to the M atoms coordinating to triangular cluster faces. Molecular orbital analyses show that the M atoms of the Ge₉M fragments coordinate to a second [Ge₉] cluster with similar orbitals but in different ways. The [Ge₉Sn]^2?unit donates two electrons to the triangular face of a second [Ge₉]^2? cluster with D_3h symmetry, whereas [Ge₉Zn]^2?acts as an electron acceptor when interacting with the triangular face of a D_3h‐symmetric [Ge₉]^4? unit.     

Gutmann's Donor Numbers Correctly Assess the Effect of the Solvent on the Kinetics of SNAr Reactions in Ionic Liquids

We report an experimental study on the effect of solvents on the model S_NAr reaction between 1‐chloro‐2,4‐dinitrobenzene and morpholine in a series of pure ionic liquids (IL). A significant catalytic effect is observed with reference to the same reaction run in water, acetonitrile, and other conventional solvents. The series of IL considered include the anions, NTf₂^?, DCN^?, SCN^?, CF₃SO₃^?, PF₆^?, and FAP^? with the series of cations 1‐butyl‐3‐methyl‐imidazolium ([BMIM]⁺), 1‐ethyl‐3‐methyl‐imidazolium ([EMIM]⁺), 1‐butyl‐2,3‐dimethyl‐imidazolium ([BM₂IM]⁺), and 1‐butyl‐1‐methyl‐pyrrolidinium ([BMPyr]⁺). The observed solvent effects can be attributed to an “anion effect”. The anion effect appears related to the anion size (polarizability) and their hydrogen‐bonding (HB) abilities to the substrate. These results have been confirmed by performing a comparison of the rate constants with Gutmann's donicity numbers (DNs). The good correlation between rate constants and DN emphasizes the major role of charge transfer from the anion to the substrate.     

Phosphide Delivery to a Cyclotrisilene

The reactivity of the 2‐phosphaethynolate anion (PCO^?) towards a cyclic trisilene (cSi₃(Tip)₄) is reported. The result is the net activation of the P? C and Si? Si multiple bonds of the precursors affording a heteroatomic bicyclo[1.1.1]pentan‐2‐one analogue ([P(CO)Si₃(Tip)₄]^?; 1 ). This reaction can be interpreted as the formal addition of a phosphide and a carbonyl across the Si? Si double bond. Photolytic decarbonylation of 1 results in the incorporation of the phosphide vertex into the cyclotrisilene scaffold, yielding a congener of the cyclobutene anion with considerable allylic character.     

Studies on the Reactivity of [Ge9]4− towards [Fe(cot)(CO)3]: Synthesis and Characterization of [Ge8Fe(CO)3]3− and of the Anionic Organometallic Species [Fe(cot)(CO)3]−

Reaction of cyclooctatetraene (COT) iron(II) tricarbonyl, [Fe(cot)(CO)₃], with one equivalent of K₄Ge₉ in ethylenediamine (en) yielded the cluster anion [Ge₈Fe(CO)₃]^3? which was crystallographically‐characterized as a [K(2,2,2‐crypt)]⁺ salt in [K(2,2,2‐crypt)]₃[Ge₈Fe(CO)₃]. The chemically‐reduced organometallic species [Fe(η³‐C₈H₈)(CO)₃]^? was also isolated as a side‐product from this reaction as [K(2,2,2‐crypt)][Fe(η³‐C₈H₈)(CO)₃]. Both species were further characterized by EPR and IR spectroscopy and electrospray mass spectrometry. The [Ge₈Fe(CO)₃]^3? cluster anion represents an unprecedented functionalized germanium Zintl anion in which the nine‐atom precursor cluster has lost a vertex, which has been replaced by a transition‐metal moiety.     

Atom Exchange Versus Reconstruction: (GexAs4−x)x− (x=2, 3) as Building Blocks for the Supertetrahedral Zintl Cluster [Au6(Ge3As)(Ge2As2)3]3−

The Zintl anion (Ge₂As₂)^2? represents an isostructural and isoelectronic binary counterpart of yellow arsenic, yet without being studied with the same intensity so far. Upon introducing [(PPh₃)AuMe] into the 1,2‐diaminoethane (en) solution of (Ge₂As₂)^2?, the heterometallic cluster anion [Au₆(Ge₃As)(Ge₂As₂)₃]^3? is obtained as its salt [K(crypt‐222)]₃[Au₆(Ge₃As)(Ge₂As₂)₃]?en?2 tol ( 1 ). The anion represents a rare example of a superpolyhedral Zintl cluster, and it comprises the largest number of Au atoms relative to main group (semi)metal atoms in such clusters. The overall supertetrahedral structure is based on a (non‐bonding) octahedron of six Au atoms that is face‐capped by four (Ge_xAs_4?x)^x? (x=2, 3) units. The Au atoms bind to four main group atoms in a rectangular manner, and this way hold the four units together to form this unprecedented architecture. The presence of one (Ge₃As)^3? unit besides three (Ge₂As₂)^2? units as a consequence of an exchange reaction in solution was verified by detailed quantum chemical (DFT) calculations, which ruled out all other compositions besides [Au₆(Ge₃As)(Ge₂As₂)₃]^3?. Reactions of the heavier homologues (Tt₂Pn₂)^2? (Tt=Sn, Pb; Pn=Sb, Bi) did not yield clusters corresponding to that in 1 , but dimers of ternary nine‐vertex clusters, {[AuTt₅Pn₃]₂}^4? (in 2 – 4 ; Tt/Pn=Sn/Sb, Sn/Bi, Pb/Sb), since the underlying pseudo‐tetrahedral units comprising heavier atoms do not tend to undergo the said exchange reactions as readily as (Ge₂As₂)^2?, according to the DFT calculations.     

Polymerization kinetics of rac‐lactide initiated with alcohol/stannous octoate using in situ attenuated total reflectance‐fourier transform infrared spectroscopy: An initiator study

rac‐Lactide polymerization kinetics in THF at 72 °C were monitored in real‐time using mid‐infrared ATR‐FTIR spectroscopy, with diamond composite insertion probe and light conduit technology. Monomer concentration as a function of time was acquired using the 1240 cm^?1 resonance associated with the ? CO? O? C? stretch. Polymerizations were initiated with either n‐propanol (PrOH), ethylene glycol (EG), trimethylol propane (TMP), or pentaerythritol (PENTA) with the coinitiator stannous octoate (Sn(Oct)₂). Polymerizations were found to be reversible at high monomer conversions, with a residual monomer concentration at 72 °C (345 K) of 0.081 M. The polymerizations were internally first‐order with respect to monomer, indicating a constant concentration of propagating centers. For a typical reaction with [rac‐LA]₀ = 1.0 M, [PENTA]₀ = 1.3 × 10^?2 M, and [Sn(Oct)₂] = 2.5 × 10^?2 M, the first‐order rate constant, k_app was measured as 1.8 × 10^?4 s^?1. First‐order rate constants were determined to be independent of polymer architecture (i.e., initiator functionality) and proportional to [Sn(Oct)₂] for [Sn(Oct)₂]₀/[ROH]₀ ? 1, where [ROH]₀ represents the initial concentration of initiating hydroxyl groups. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 797–803, 2009     

Ionic thermo‐responsive copolymer with multi LCST values: easy and fast LCST‐change through anion exchange

An ionic thermo‐responsive copolymer with multiple lower critical solution temperatures (multi‐LCSTs) has been developed, and the multi‐LCSTs were easily changeable according to the various counter anion types. The multi‐LCST values were achieved by introducing an ionic segment with an imidazolium moiety within the p‐NIPAAm polymer chain to produce poly(NIPAAm‐co‐BVIm) copolymers, [p‐NIBIm]⁺[Br]^?, and changing the counter anion type to produce [p‐NIBIm]⁺[X]^? (X = Cl, AcO, HCO₃, BF₄, CF₃SO₃, PF₆, SbF₆). The as‐prepared temperature‐responsive copolymers were physicochemically characterized via proton nuclear magnetic resonance spectroscopy (¹H‐NMR), Fourier‐transform infrared, X‐ray photoelectron spectroscopy, and thermogravimetric analysis. Their various LCST values, micelle sizes, and surface charges were determined using an Ultraviolet‐visible spectrophotometer and a Zeta (ξ) sizer, which were fitted with temperature and stirring control. The copolymers showed a broad LCST spectrum between 39°C and 52°C. The Zeta (ξ) potential values at a pH = 7 decreased from about +9.7 for [p‐NIBIm]⁺[X]^? (X = Cl ≈ Br) to about +2.0 mV for [p‐NIBIm]⁺[X]^? (X = PF₆ ≈ SbF₆). The micelle size (or volume) of the copolymers with different anionic species gradually increased from 181.2 nm (or 2.49 × 10^?17 cm^?3) for [p‐NIBIm]⁺[Br]^? to 229.2 nm (or 5.04 × 10^?17 cm^?3) for [p‐NIBIm]⁺[CF₃SO₃]^?, showing a clear effect of the anion on the micelle size (or volume) at a constant temperature, such as body temperature. The fact that the most important physicochemical properties for the thermo‐responsive copolymers, such as the LCST value, micelle size (or volume), and surface charge, could be easily controlled only through the anion exchange suggests these are highly applicable as ionic thermo‐responsive copolymers in a drug (or gene, protein) delivery system. Copyright © 2015 John Wiley & Sons, Ltd.     

Towards a Molecular Understanding of Cation–Anion Interactions—Probing the Electronic Structure of Imidazolium Ionic Liquids by NMR Spectroscopy,X‐ray Photoelectron Spectroscopy and Theoretical Calculations

Ten [C₈C₁Im]⁺ (1‐methyl‐3‐octylimidazolium)‐based ionic liquids with anions Cl^?, Br^?, I^?, [NO₃]^?, [BF₄]^?, [TfO]^?, [PF₆]^?, [Tf₂N]^?, [Pf₂N]^?, and [FAP]^? (TfO=trifluoromethylsulfonate, Tf₂N=bis(trifluoromethylsulfonyl)imide, Pf₂N=bis(pentafluoroethylsulfonyl)imide, FAP=tris(pentafluoroethyl)trifluorophosphate) and two [C₈C₁C₁Im]⁺ (1,2‐dimethyl‐3‐octylimidazolium)‐based ionic liquids with anions Br^? and [Tf₂N]^? were investigated by using X‐ray photoelectron spectroscopy (XPS), NMR spectroscopy and theoretical calculations. While ¹H NMR spectroscopy is found to probe very specifically the strongest hydrogen‐bond interaction between the hydrogen attached to the C² position and the anion, a comparative XPS study provides first direct experimental evidence for cation–anion charge‐transfer phenomena in ionic liquids as a function of the ionic liquid’s anion. These charge‐transfer effects are found to be surprisingly similar for [C₈C₁Im]⁺ and [C₈C₁C₁Im]⁺ salts of the same anion, which in combination with theoretical calculations leads to the conclusion that hydrogen bonding and charge transfer occur independently from each other, but are both more pronounced for small and more strongly coordinating anions, and are greatly reduced in the case of large and weakly coordinating anions.     

Mechanism of the Pd‐catalyzed Decarboxylative Allylation of α‐Imino Esters: Decarboxylation via Free Carboxylate Ion

The Pd‐catalyzed decarboxylative allylation of α‐(diphenylmethylene)imino esters ( 1 ) or allyl diphenylglycinate imines ( 2 ) is an efficient method to construct new C(sp³)? C(sp³) bonds. The detailed mechanism of this reaction was studied by theoretical calculations [ONIOM(B3LYP/LANL2DZ+p:PM6)] combined with experimental observations. The overall catalytic cycle was found to consist of three steps: oxidative addition, decarboxylation, and reductive allylation. The oxidative addition of 1 to [(dba)Pd(PPh₃)₂] (dba=dibenzylideneacetone) produces an allylpalladium cation and a carboxylate anion with a low activation barrier of +9.1 kcal mol^?1. The following rate‐determining decarboxylation proceeds via a solvent‐exposed α‐imino carboxylate anion rather than an O‐ligated allylpalladium carboxylate with an activation barrier of +22.7 kcal mol^?1. The 2‐azaallyl anion generated by this decarboxylation attacks the face of the allyl ligand opposite to the Pd center in an outer‐sphere process to produce major product 3 , with a lower activation barrier than that of the minor product 4 . A positive linear Hammett correlation [ρ=1.10 for the PPh₃ ligand] with the observed regioselectivity ( 3 versus 4 ) supports an outer‐sphere pathway for the allylation step. When Pd combined with the bis(diphenylphosphino)butane (dppb) ligand is employed as a catalyst, the decarboxylation still proceeds via the free carboxylate anion without direct assistance of the cationic Pd center. Consistent with experimental observations, electron‐withdrawing substituents on 2 were calculated to have lower activation barriers for decarboxylation and, thus, accelerate the overall reaction rates.     

Hydride Migration from a Triangular Face to a Tetrahedral Cavity in Tetranuclear Iron Carbonyl Clusters upon Coordination of [AuPPh3]+ Fragments

Metal hydrides are of fundamental importance in chemistry, both as solid‐state materials and molecular compounds. The first low‐valent molecular metal cluster containing an interstitial four‐coordinate hydride in a tetrahedral site is decribed, which undergoes hydride migration from the surface to the tetrahedral cavity of the cluster upon coordination of a [AuPPh₃]⁺ fragment. The [HFe₄(CO)₁₂(AuPPh₃)₂]^? mono‐anion, which contains a surface μ₃‐H, was obtained from the reaction of [HFe₄(CO)₁₂]^3? with two equivalents of [Au(PPh₃)Cl]. This is, in turn, transformed into the neutral [HFe₄(CO)₁₂(AuPPh₃)₃] upon addition of a third [AuPPh₃]⁺ fragment, with concomitant migration of the unique hydride from the surface of the cluster to its tetrahedral cavity. All of these species have been fully characterized in solution by means of IR and multinuclear NMR spectroscopy, and in the solid state by single‐crystal X‐ray diffractometry.     

{2,6‐Bis­[(di­methyl­amino)­methyl]­phenyl‐N2,C1,N6}di­phenyl­tin(II) bromide monohydrate

In the title compound, [Sn(C₆H₅)₂(C₁₂H₁₉N₂)]Br·H₂O, the Sn^IV atom lies on a twofold axis and is coordinated by a C and two N atoms from the 2,6‐bis­[(di­methyl­amino)­methyl]­phenyl ligand in a tridentate fashion and by two phenyl groups. The resulting geometry is intermediate between square pyramidal and trigonal bipyramidal, with three C atoms in equatorial and the two N atoms in axial positions. The main deformation from ideal trigonal‐bipyramidal geometry is seen for the N—Sn—N angle [152.18 (7)°]. The Br^? anion and the water solvate mol­ecule are on an inversion centre and twofold axis, respectively. They form an infinite chain of Br?H—O—H?Br hydrogen bonds [Br?O 3.529 (2) Å] without contributing to the primary coordination sphere of the Sn atom.