Efficient Fe/CuFeO2/rGO nanocomposite catalyst for electro‐Fenton degradation of organic pollutant: Preparation,characterization and optimization

The nanocomposite of zero‐valent iron and delafossite CuFeO₂ supported on reduced graphene oxide was synthesized for the first time to evaluate its performance as the heterogeneous catalyst toward electro‐Fenton (EF) removal of catechol. X‐ray diffraction, Fourier transform‐infrared, scanning electron microscopy and Brunauer–Emmett–Teller (BET) were used to characterize the nanocomposite. It was found that the rhombohedral structure of CuFeO₂ remained stable during the nanocomposite preparation. The BET surface area of the nanocomposite increased about 102 times in comparison with bare CuFeO₂. The influence of the operating parameters was investigated. The optimum operating conditions were pH 3, Fe/CuFeO₂/rGO: 1 g/l; catechol: 7.5 × 10^?4 mol/l; and I: 150 mA, which led to 99% and 78.4% catechol and chemical oxygen demand removal in 120 min, respectively. The stability of the catalyst by leaching measurements was studied. Only 2% and 3.1% of iron and copper, respectively, was leached in the solution. The obtained results introduced Fe/CuFeO₂/rGO as a stable and appropriate catalyst for removal of organic compounds by the EF process. It was inferred from the scavenger utilization that hydroxyl radical plays a major role in catechol elimination and EF reaction followed by the Haber–Weiss mechanism at optimum conditions. The gas chromatography–mass spectrometry analysis was performed to detect the intermediate products, and an acceptable degradation pathway was proposed. The EF degradation of catechol follows a pseudo‐first‐order kinetics model with a rate constant of 3.69 × 10^?2 min^?1 for the optimum operating conditions. The reusability of Fe/CuFeO₂/rGO was investigated for six cycles, and the catalytic efficiency almost remained.     

Selective Synthesis of 2‐Aryl‐1‐benzylated‐1H‐benzimidazoles

An efficient and simple procedure was developed for the green synthesis of various 2‐aryl‐1‐ben‐zylated‐1H‐benzimidazoles in high yields by condensation of o‐phenylenediamine with aldehydes with P₂O₅/SiO₂ as catalyst under solvent‐free and ambient conditions.     

Eco‐friendly synthesis of 3,4‐dihydroquinoxalin‐2‐amine,diazepine‐tetrazole and benzodiazepine‐2‐carboxamide derivatives with the aid of MCM‐48/H5PW10V2O40

A heterogeneous material composed of MCM‐48/H₅PW₁₀V₂O₄₀ was produced and used as an efficient, eco‐friendly and highly recyclable catalyst for the one‐pot and multicomponent synthesis of 3,4‐dihydroquinoxalin‐2‐amine, diazepine‐tetrazole and benzodiazepine‐2‐carboxamide derivatives in aqueous media and at room temperature with high yields in short reaction times (40–60 min). The recoverable catalyst was easily recycled at least five times without any loss of catalytic activity. The structures of obtained products were confirmed using ¹H NMR and ¹³C NMR spectra.     

A Magnetically Separable Catalyst for Synthesis of 1‐Phenoxy‐2‐propanol Via Atom‐economic Reaction

A magnetically separable catalyst Al₂O₃‐MgO/Fe₃O₄ was prepared by Al₂O₃‐MgO supported on magnetic oxide Fe₃O₄ and charactered by FT‐IR, XRD and SEM. The mixed oxides afforded high catalytic activity and selectivity for synthesis of 1‐phenoxy‐2‐propanol from phenol and propylene oxide with 80.3% conversion and 88.1% selectivity to 1‐phenoxy‐2‐propanol. Especially, facile separation of the catalyst by a magnet was obtained and the catalytic performance of the recovered catalyst was unaffected even at the forth run.     

Synthesis of (−)‐3‐Carene‐2,5‐dione via Allylic Oxidation of (+)‐3‐Carene

Activated carbon‐supported CuCl₂ (CuCl₂/AC) is a heterogeneous catalyst for the liquid‐phase selective allylic oxidation of (+)‐3‐carene with tert‐butyl hydroperoxide (TBHP) and O₂ to produce (?)‐3‐carene‐2,5‐dione. The possible reaction mechanism and the effects of different factors on the allylic oxidation were investigated. The optimal conditions are as follows: reaction temperature, 45 °C; molar ratio of CuCl₂ to (+)‐3‐carene, 1%; volume ratio of (+)‐3‐carene to TBHP, 1:3; and reaction time, 12 h. Under the optimal conditions, the conversion of (+)‐3‐carene reached 100%, whereas the selectivity for (?)‐3‐carene‐2,5‐dione reached 78%. The CuCl₂/AC catalyst was characterized via X‐ray diffraction, and the chemical structure of the target compound was identified via infrared spectroscopy, proton nuclear magnetic resonance spectroscopy, mass spectrometry, and optical analysis.     

Vapor‐Phase Aldolization of n‐Butyraldehyde to 2‐Ethyl‐2‐Hexenal over Solid‐Base Catalysts

Vapor‐phase aldol condensation of n‐butyraldehyde to 2‐ethyl‐2‐hexenal was studied at 1 atm and 150～ 300°C in a fixed‐bed, integral‐flow reactor by using NaX, KX, γ‐Al₂O₃ and Na/NaOH/γ‐Al₂CO₃ catalysts. Ion exchange of NaX zeolite with potassium acetate solution results in a decrease of crystallinity and apparent lowering of surface area, whereas the basic strength is enhanced. Treatment of γ‐Al₂O₃ with NaOH and Na causes a large decrease of the surface area but strong enhancement of the catalyst basicity. The catalytic activity on the basis of unit surface area is in the order Na/NaOH/γ‐Al₂O₃ < KXU < KXW < NaX >γ‐Al₂O₃, in accordance with the relative catalyst basic strength. The molar ratio of trimeric to dimeric products increases with increasing the reaction temperature and the catalyst basic strength except for Na/NaOH/γ‐Al₂O₃. Very high selectivity of 2‐ethyl‐2‐hexenal (>98.5%) was observed for reactions over NaX zeolite at 150°C. Based on the FT‐IR and the catalytic results, the reaction paths are proposed as follows: self‐aldol condensation of n‐butyraldehyde, followed by dehydration produces 2‐ethyl‐2‐hexenal, which then reacts with n‐butyraldehyde and successively dehydrates to 2,4‐diethyl‐2,4‐octadienal and 1,3,5‐triethylbenzene. For the reaction over NaX, the calculated Arrhenius frequency factor and activation energy are 314 mol/g·h and 32.6 kJ/mol, respectively.     

Palladium‐Catalyzed Annulation of 1,2‐Diborylalkenes and ‐Arenes with 1‐Bromo‐2‐[(Z)‐2‐bromoethenyl]arenes: A Modular Approach to Multisubstituted Naphthalenes and Fused Phenanthrenes

(Z)‐1,2‐Diaryl‐1,2‐bis(pinacolatoboryl)ethenes underwent double‐cross‐coupling reactions with 1‐bromo‐2‐[(Z)‐2‐bromoethenyl]arenes in the presence of [Pd(PPh₃)₄] as a catalyst and 3 M aqueous Cs₂CO₃ as a base in THF at 80 °C. The double‐coupling reaction gave multisubstituted naphthalenes in good to high yields. Annulation of 1,2‐bis(pinacolatoboryl)arenes with bromo(bromoethenyl)arenes in the presence of a catalyst system that consisted of [Pd₂(dba)₃] (dba=dibenzylideneacetone) and 2‐dicyclohexylphosphino‐2′,6′‐dimethoxybiphenyl (SPhos) under the same conditions produced fused phenanthrenes in good to high yields. The first annulation coupling occurred regiospecifically at the bromoethenyl moiety. This procedure is applicable to the facile synthesis of polysubstituted anthracenes, benzothiophenes, and dibenzoanthracenes through a double annulation pathway by using the corresponding dibromobis[(Z)‐2‐bromoethenyl]benzenes as diboryl coupling partners.     

Synthesis of 4‐((2‐hydroxynaphthalen‐1‐yl)(aryl)methyl)‐5‐methyl‐2‐phenyl‐1H‐pyrazol‐3(2H)‐ones using nano‐Zn‐[2‐boromophenyl‐salicylaldimine‐methylpyranopyrazole]Cl2 nanoparticles

Nano‐Zn‐[2‐boromophenyl‐salicylaldimine‐methylpyranopyrazole]Cl₂ (nano‐[Zn‐2BSMP]Cl₂) as a nanoparticle Schiff base complex and a catalyst was introduced for the solvent‐free synthesis of 4‐((2‐hydroxynaphthalen‐1‐yl)(aryl)methyl)‐5‐methyl‐2‐phenyl‐1H‐pyrazol‐3(2H)‐ones by the multicomponent condensation reaction of various aromatic aldehydes, β‐naphthol, ethyl acetoacetate, and phenyl hydrazine at room temperature.     

ε‐Caprolactone polymerization under air by the biocatalyst: Magnesium 2,6‐di‐tert‐butyl‐4‐methylphenoxide

This study investigated the synthesis of the biocatalyst, magnesium 2,6‐di‐tert‐butyl‐4‐methylphenoxide (Mg(BHT)₂) complex, and the ring‐opening polymerization (ROP) of ε‐caprolactone (CL). The complex demonstrates high catalytic activity and controllable of molecular weight for the ROP of CL in tetrahydrofuran at room temperature, even when polymerization was performed under air. Before this study, the polymerization of CL had never been performed using a magnesium catalyst under air at room temperature. Various forms of alcohols with different purposes were also used as initiators with Mg(BHT)₂. The results show that the magnesium complex acts as a perfect catalyst because of its high catalytic activity and control ability without any cytotoxicity in the polymerization of CL, making it suitable for biomedical applications. In addition, nanoparticle formation, cytotoxicity, and phototoxicity of tri‐2‐hydroxyethyl ester [Ce6‐(CH₂CH₂OPCL)₃] were also studied in this article and Ce6‐(CH₂CH₂OPCL)₃ formed nanoparticle can act as a nanophotosensitizer for photodynamic therapy. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

One‐Pot,Three‐Component Synthesis of 1‐(2‐Hydroxyethyl)‐1H‐1,2,3‐triazole Derivatives by Copper‐Catalyzed 1,3‐Dipolar Cycloaddition of 2‐Azido Alcohols and Terminal Alkynes under Mild Conditions in Water

A safe, efficient, and improved procedure for the regioselective synthesis of 1‐(2‐hydroxyethyl)‐1H‐1,2,3‐triazole derivatives under ambient conditions is described. Terminal alkynes reacted with oxiranes and NaN₃ in the presence of a copper(I) catalyst, which is prepared by in situ reduction of the copper(II) complex 4 with ascorbic acid, in H₂O. The regioselective reactions exclusively gave the corresponding 1,4‐disubstituted 1H‐1,2,3‐triazoles in good to excellent yields. This procedure avoids the handling of organic azides as they are generated in situ, making this already powerful click process even more user‐friendly and safe. The remarkable features of this protocol are high yields, very short reaction times, a cleaner reaction profile in an environmentally benign solvent (H₂O), its straightforwardness, and the use of nontoxic catalysts. Furthermore, the catalyst could be recovered and recycled by simple filtration of the reaction mixture and reused for ten consecutive trials without significant loss of catalytic activity. No metal‐complex leaching was observed after the consecutive catalytic reactions.     

Synthesis of Monospiro‐2‐amino‐4H‐pyran Derivatives Catalyzed by Propane‐1‐sulfonic Acid‐Modified Magnetic Hydroxyapatite Nanoparticles

Various monospiro‐2‐amino‐4H‐pyran derivatives have been synthesized in high yields (via three‐component coupling of ninhydrin or different isatins with malononitrile and 1,3‐dicarbonyl compounds) in the presence of catalytic amount of propane‐1‐sulfonic acid‐modified magnetic hydroxyapatite nanoparticles in H₂O. Due to easy magnetic removal of nanocatalyst and applying of H₂O as solvent, this protocol enhanced product purity, and promised economic as well as environmental benefits, exemplifying a waste‐free chemistry. More importantly, the catalyst could be easily recycled for more than five times without loss of activity.     

Design,Synthesis and Biological Evaluation of Novel N‐(4‐([2,2′:5′,2′′‐Terthiophen]‐5‐yl)‐2‐methylbut‐3‐yn‐2‐yl) Benzamide Derivatives

On the basis of the principle of combination of active groups, a series of novel N‐(4‐([2,2′:5′,2′′‐terthiophen]‐5‐yl)‐2‐methylbut‐3‐yn‐2‐yl) benzamide derivatives were designed, synthesized and systematically evaluated for their antiviral activity against tobacco mosaic virus (TMV). The bioassay results showed that most of these compounds displayed good anti‐TMV activity, and some of them exhibited higher antiviral activity than commercial Ningnanmycin. Especially, compound 8e with excellent anti‐TMV activity (inactivation activity, 92.3%/500 µg·mL^?1; curative activity, 85.7%/500 µg·mL^?1 and protection activity, 64.7%/500 µg·mL^?1) emerged as a potential inhibitor of plant virus TMV. Quantitative structure‐activity relationship studies proved that the van der Waals volume (V) and electronic parameter (∑(∑σ_o+σ_p) and ∑σ_m) for the substituent R¹ were very important for antiviral activities in this class of compounds.     

Ligand‐free palladium‐catalyzed tandem pathways for the synthesis of 4,4‐diarylbutanones and 4,4‐diaryl‐3‐butenones under microwave conditions

Two efficient Pd‐catalyzed tandem pathways for the synthesis of 4,4‐diaryl‐2‐butanones and 4,4‐diaryl‐3‐buten‐2‐ones were elaborated. The first step in both procedures was the Heck coupling of methyl vinyl ketone (MVK) and various aryl iodides leading to 4‐aryl‐3‐buten‐2‐one with the yield of up to 92% in 1 hr. The second step performed with the same catalyst and a new portion of aryl iodide in the presence K₂CO₃ as a base produced 4,4‐diaryl‐3‐buten‐2‐ones in high yield. Reaction selectivity changed completely to saturated 4,4‐diaryl‐2‐butanones, reductive Heck products, when a tertiary amine was used instead of K₂CO₃. Due to the application of microwave irradiation (MW), the desired products were obtained in high yield in a short time (4 hr), using 0.5 mol% of the Pd (OAc)₂ catalyst without additional ligands.     

Ultrasound‐Promoted Catalyst‐Free Synthesis of 2,2′‐(1,4‐Phenylene)bis[1‐acetyl‐1,2‐dihydro‐4H‐3,1‐benzoxazin‐4‐one] Derivatives

A convenient approach to 2,2′‐(1,4‐phenylene)bis[1‐acetyl‐1,2‐dihydro‐4H‐3,1‐benzoxazin‐4‐one] derivatives 4 was explored employing the one‐pot condensation of anthranilic acids (=2‐aminobenzoic acids) 1 with terephthalaldehyde (=benzene‐1,4‐dicarboxaldehyde; 2 ) under ultrasound‐irradiation conditions (Scheme 1). The reactions proceeded smoothly in the presence of excess Ac₂O in the absence of any other catalyst and solvent to afford the respective products in high yields.     

One‐Pot,Three‐Component Condensation of Aldehydes, 2‐Naphthol and 1,3‐Dicarbonyl Compounds

A practical and efficient procedure for the one‐pot multicomponent couping of aryl aldehydes, 2‐naphthol and cyclic 1,3‐dicarbonyl compounds using perchloric acid adsorbed on silica gel (HClO₄‐SiO₂) as a highly efficient, inexpensive, convenient, reusable heterogeneous catalyst under solvent‐free conditions has been developed. Various biologically important 12‐aryl‐8,9,10,12‐tetrahydrobenzo[a]xanthen‐11‐one derivatives have been efficiently synthesized in high to excellent yields. The present approach offers several advantages such as shorter reaction times, simple work‐up, excellent yields, low cost, and mild reaction conditions. Furthermore, the catalyst can be recovered simply and reused without appreciable loss of its catalytic activity.     

Ferrocene‐tagged ionic liquid stabilized on silica‐coated magnetic nanoparticles: Efficient catalyst for the synthesis of 2‐amino‐3‐cyano‐4H‐pyran derivatives under solvent‐free conditions

An advanced novel magnetic ionic liquid based on imidazolium tagged with ferrocene, a supported ionic liquid, is introduced as a recyclable heterogeneous catalyst. Catalytic activity of the novel nanocatalyst was investigated in one‐pot three‐component reactions of various aldehydes, malononitrile and 2‐naphthol for the facile synthesis of 2‐amino‐3‐cyano‐4H‐pyran derivatives under solvent‐free conditions without additional co‐catalyst or additive in air. For this purpose, we firstly synthesized and investigated 1‐(4‐ferrocenylbutyl)‐3‐methylimidazolium acetate, [FcBuMeIm][OAc], as a novel basic ferrocene‐tagged ionic liquid. This ferrocene‐tagged ionic liquid was then linked to silica‐coated nano‐Fe₃O₄ to afford a novel heterogeneous magnetic nanocatalyst, namely [Fe₃O₄@SiO₂@Im‐Fc][OAc]. The synthesized novel catalyst was characterized using ¹H NMR, ¹³C NMR, Fourier transform infrared and energy‐dispersive X‐ray spectroscopies, X‐ray diffraction, and transmission and field emission scanning electron microscopies. Combination of some unique characteristics of ferrocene and the supported ionic liquid developed the catalytic activity in a simple, efficient, green and eco‐friendly protocol. The catalyst could be reused several times without loss of activity.     

CoFe2O4@SiO2‐CPTES‐Guanidine‐Cu(II): A novel and reusable nanocatalyst for the synthesis of 2,3‐dihydroquinazolin‐4(1H)‐ones and polyhydroquinolines and oxidation of sulfides

CoFe₂O₄@SiO₂‐CPTES‐Guanidine‐Cu(II) magnetic nanoparticles were synthesized and used as a new, inexpensive and efficient heterogeneous catalyst for the synthesis of polyhydroquinolines and 2,3‐dihydroquinazoline‐4(1H)‐ones and for the oxidation of sulfides. The structure of this nanocatalyst was characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, vibrating sample magnetometry, thermogravimetric analysis, X‐ray diffraction and inductively coupled plasma optical emission spectrometry. Simple preparation, high catalytic activity, simple operation, high yields, use of green solvents, easy magnetic separation and reusability of the catalyst are some of the advantages of this protocol.     

Supported Preyssler Nanoparticles in Synthesis of 1,3‐Diaryl‐5‐Spirohexahydropyrimidines

Silica‐supported Preyssler nanoparticles (H₁₄[NaP₅W₃₀O₁₁₀])/SiO₂ are used as a new and recyclable catalyst for the preparation of 1,3‐diaryl‐5‐spirohexahydropyrimidines via a one‐pot condensation of anilines, formaldehyde, and cyclohexanone.     

Catalytic application of sulfonic acid‐functionalized titana‐coated magnetic nanoparticles for the preparation of 1,8‐dioxodecahydroacridines and 2,4,6‐triarylpyridines via anomeric‐based oxidation

We have developed green, efficient and powerful protocols for the preparation of 2,4,6‐triarylpyridines and 1,8‐dioxodecahydroacridines in the presence of Fe₃O₄@TiO₂@O₂PO₂(CH₂)₂NHSO₃H as a sulfonic acid‐functionalized titana‐coated magnetic nanoparticle catalyst under mild and solvent‐free reaction conditions. These protocols furnished the desired products in short reaction times with good to high yields (20–40 min and 80–86% in the case of 2,4,6‐triarylpyridines; 15–90 min and 80–93% in the case of 1,8‐dioxodecahydroacridines). The final step of the mechanistic route in the synthesis of 2,4,6‐triarylpyridines proceeds via an anomeric‐based oxidation. Also, the nanomagnetic core–shell catalyst can be recycled and reused in both cases of the scrutinized one‐pot multicomponent reactions with high turnover number and turnover frequency.     

New Substituted 1‐Aryl‐4,4,6‐Trimethyl‐3,4‐Dihydropyrimidine‐2‐(1H)Thiones; A Metal‐Free and Solvent‐Free Synthesis,Characterization, and Lymphoid Tyrosine Phosphatase Inhibition Studies

A series of fourteen 3,4‐dihydropyrimidine‐2‐thiones ( 3a–n ) were synthesized by a green protocol, and their structures were characterized by spectroanalytical data. The compounds were obtained in high yields by efficient annulation of mesityl oxide (4‐methylpent‐3‐en‐2‐one) with anilines in the presence of potassium thiocyanate. The reaction is essentially metal‐catalyst‐ and solvent‐free, as mesityl oxide itself is the solvent as well as the reactant. The compounds were tested for their ability to inhibit the lymphoid tyrosine phosphatase PTPN22, and 5 of the 14 compounds exhibited IC₅₀ values in the mid‐micromolar range, with the most potent hit being the compound 3d , having a methoxy substituent at the 2‐position of the phenyl ring with an IC₅₀ = 18 ± 1 μM, and second most potent compound ( 3c ) with an IC₅₀ value of 45 ± 3 μM, having methyl substituents at both 2‐ and 4‐position of the phenyl ring.