Synthesis,characterization and application of nano‐CoAl2O4 as an efficient catalyst in the preparation of hexahydroquinolines

In this work, nano‐CoAl₂O₄ was prepared and characterized by FT‐IR, energy dispersive X‐ray analysis (EDX), X‐ray diffraction patterns (XRD), scanning electron microscopy (SEM), vibrating sample magnetometer (VSM) and transmission electron microscopy (TEM). Nano‐CoAl₂O₄ was applied for the synthesis of hexahydroquinoline derivatives by the condensation reaction between ethyl acetoacetate, dimedone and various aldehydes. These reactions were carried out at 80 °C under solvent‐free conditions.     

Synthesis of a novel and reusable biological urea based acidic nanomagnetic catalyst: Application for the synthesis of 2‐amino‐3‐cyano pyridines via cooperative vinylogous anomeric based oxidation

In the current study, a novel and reusable biological urea based nano magnetic catalyst namely Fe₃O₄@SiO₂@(CH₂)₃‐urea‐benzimidazole sulfonic acid was designed and synthesized. The structure of the titled catalyst was fully characterized using several skills including Fourier transform infrared (FT‐IR) spectroscopy, energy dispersive X‐ray (EDX) analysis, X‐ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), thermo gravimetric analysis/differential thermal analysis (TG/DTG) and vibrating sample magnetometer (VSM). Then, the catalytic performance of Fe₃O₄@SiO₂@(CH₂)₃‐urea‐benzimidazole sulfonic acid was successfully inspected towards the multicomponent synthesis of 2‐amino‐3‐cyano pyridine derivatives through a vinylogous anomeric based oxidation pathway.     

Application of the Fe3O4@1,10‐phenanthroline‐5,6‐diol@Mn nano‐catalyst for the green synthesis of tetrazoles and its biological performance

The Fe₃O₄ magnetic particles were modified with 1,10‐phenanthroline‐5,6‐diol (Phen) and the related Mn complex (Fe₃O₄@Phen@Mn) synthesized as a heterogeneous catalyst to be used for the one‐pot three‐component synthesis of various tetrazoles. The catalysts were characterized by several methods, such as the elemental analysis, FT‐IR, X‐ray powder diffraction, dispersive X‐ray spectroscopy, scanning electron microscopy, transmission electron microscopy, dynamic light scattering, thermogravimetric‐differential thermal analysis, vibrating sample magnetometer and X‐ray photoelectron spectroscopy. In addition, the antioxidant and antibacterial activities of the catalyst and its Phen ligand were in vitro screened with 2,2‐diphenyl‐1‐picrylhydrazyl by free radical scavenging methods. Results showed that the synthesized compounds possess strong antioxidant activity (IC50; 0.172  ±  0.005 mg ml^?1) as well as a good antibacterial potential in comparison to standards.     

Zn3(BTC)2 as a Highly Efficient Reusable Catalyst for the Synthesis of 2‐Aryl‐1H‐Benzimidazole

Zn₃(BTC)₂ metal‐organic frameworks as recyclable and heterogeneous catalysts were effectively used to catalyze the synthesis of benzimidazole derivatives from o‐phenylendiamine and aldehydes in ethanol. This method provides 2‐aryl‐1H‐benzimidazoles in good to excellent yields with little catalyst loading. The catalyst was characterized using different techniques such as X‐ray diffraction (XRD), energy dispersive X‐ray (EDX) analysis, scanning electron microscopy (SEM), and Fourier transform infrared (FT‐IR) spectroscopy.     

Magnetized inorganic–bioorganic nanohybrid [nano Fe3O4‐SiO2@Glu‐Cu (II)]: A novel nanostructure for the efficient solvent‐free synthesis of thiazolidin‐2‐imines

In this research, a solvent‐free four‐component one‐pot reaction of phenyl isothiocyanate, phenylacetylene, various kinds of aldehydes, and amines was interpreted to obtain the desired five‐membered heterocycles named thiazolidin‐2‐imines. The promotor of this transformation is a novel magnetite‐based multilayered inorganic–bioorganic nanohybrid prepared via embedding glutamic acid on the magnetized silica followed by anchoring Cu (II) [nano Fe₃O₄‐SiO₂@Glu‐Cu (II)]. The newly synthesized nanostructure is characterized through Fourier‐transform infrared (FT‐IR), field‐emission scanning electron microscopy (FESEM), energy dispersive X‐ray analysis (EDAX), transmission electron microscopy (TEM), X‐ray fluorescence (XRF), thermogravimetric analysis or derivative thermogravimetric (TGA/DTG), vibrating sample magnetometer (VSM), X‐ray photoelectron spectroscopy (XPS), and Brunauer–Emmett–Teller (BET) techniques. This protocol is a straightforward one‐step procedure to obtain thiazolidin‐2‐imines without requirement to propargylamines or imines as substrates. In addition, easy work‐up procedure, high yields of products, absence of organic solvents in the reaction media, recovery and reusability of nano Fe₃O₄‐SiO₂@Glu‐Cu ( II) to promote the reaction at least for three runs without activity lost, simple separation of the catalyst from reaction mixture via an external magnet, and regioselectivity of the method are some highlighted aspects of the approach.     

CoFe2O4@SiO2‐CPTES‐Guanidine‐Cu(II): A novel and reusable nanocatalyst for the synthesis of 2,3‐dihydroquinazolin‐4(1H)‐ones and polyhydroquinolines and oxidation of sulfides

CoFe₂O₄@SiO₂‐CPTES‐Guanidine‐Cu(II) magnetic nanoparticles were synthesized and used as a new, inexpensive and efficient heterogeneous catalyst for the synthesis of polyhydroquinolines and 2,3‐dihydroquinazoline‐4(1H)‐ones and for the oxidation of sulfides. The structure of this nanocatalyst was characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, vibrating sample magnetometry, thermogravimetric analysis, X‐ray diffraction and inductively coupled plasma optical emission spectrometry. Simple preparation, high catalytic activity, simple operation, high yields, use of green solvents, easy magnetic separation and reusability of the catalyst are some of the advantages of this protocol.     

Synthesis,characterization and application of 3‐methyl‐1‐sulfonic acid imidazolium tetrachloroferrate as nanostructured catalyst for the tandem reaction of β‐naphthol with aromatic aldehydes and amide derivatives

3‐methyl‐1‐sulfonic acid imidazolium tetrachloroferrate {[Msim]FeCl₄} was prepared and fully characterized by fourier transform infrared spectroscopy (FT‐IR), X‐ray diffraction (XRD), thermal gravimetric analysis (TGA), differential thermal gravimetric (DTG), field emission scanning electron microscopy (FESEM), energy dispersive X‐ray analysis (EDX) and vibrating sample magnetometer (VSM) and used, as an efficient catalyst, for the tandem reaction of β‐naphthol with aromatic aldehydes and benzamide at 110 °C under solvent‐free conditions to give 1‐amidoalkyl‐2‐naphthols in high yields and very short reaction times.     

A one‐pot method for synthesis of reduced graphene oxide‐supported Cu–Cu2O and catalytic application in tandem reaction of halides and sodium azide with terminal alkynes

Reduced graphene oxide (RGO)‐supported Cu–Cu₂O nanocomposite material (Cu‐Cu₂O@RGO) was prepared through a one‐pot reflux synthesis method. The morphology, crystal structure and composition of the prepared Cu‐Cu₂O@RGO were characterized using transmission electron microscopy, X‐ray diffraction, and X‐ray photoelectron, infrared and Raman spectroscopies. Cu‐Cu₂O@RGO as a heterogeneous catalyst was applied to tandem reactions of halides and sodium azide with terminal alkynes to synthesize effectively 1,4‐disubstituted 1,2,3‐triazoles. Moreover, the catalyst showed excellent recyclability performance with very little leaching of the metal. Compared with homogeneous catalysts, Cu‐Cu₂O@RGO as a green and efficient catalyst was recoverable, easy to separate and highly stable in the tandem method for the synthesis of 1,2,3‐triazole compounds.     

Piperazine‐functionalized nickel ferrite nanoparticles as efficient and reusable catalysts for the solvent‐free synthesis of 2‐amino‐4H‐chromenes

Piperazine‐functionalized nickel ferrite (NiFe₂O₄) nanoparticles were synthesized as recoverable heterogeneous base catalysts using a routine method. The synthesized materials were characterized using various spectroscopic techniques such as infrared, X‐ray diffraction, scanning electron microscopy, energy‐dispersive X‐ray, thermogravimetry analysis, and vibrating sample magnetometry. Catalytic efficiency was investigated in the synthesis of 2‐amino‐4H‐chromene derivatives via a one‐pot three component reaction of aldehyde and malononitrile with β or α‐naphthol/5‐methyle resorcinol under solvent‐free conditions with good to high yields. This method is operationally simple and has several advantages such as good to high yield, short reaction times, solvent‐free conditions, and easy synthesis. Moreover, the catalyst was recovered easily using an external magnet and reused three times without distinctive loss in catalytic activity.     

Biosynthesis of Pd/MnO2 nanocomposite using Solanum melongena plant extract and its application for the one‐pot synthesis of 5‐substituted 1H‐tetrazoles from aryl halides

In this work, for the first time, Solanum melongena plant extract was used for the green synthesis of Pd/MnO₂ nanocomposite via reduction osf Pd(II) ions to Pd(0) and their immobilization on the surface of manganese dioxide (MnO₂) nanoparticles (NPs) as an effective support. The synthesized nanocomposite were characterized by various analytical techniques such as Fourier transform infrared (FT‐IR), X‐ray diffraction (XRD), transmission electron microscopy (TEM), field emission scanning electron microscopy (FESEM), energy dispersive X‐ray spectroscopy (EDS) and UV–Vis spectroscopy. The catalytic activity of Pd/MnO₂ nanocomposite was used as a heterogeneous catalyst for the one‐pot synthesis of 5‐substituted 1H‐tetrazoles from aryl halides containing various electron‐donating or electron‐withdrawing groups in the presence of K ₄ [Fe (CN) ₆ ] as non‐toxic cyanide source and sodium azide. The products were obtained in good yields via a simple methodology and easy work‐up. The nanocatalyst can be recycled and reused several times with no remarkable loss of activity.     

Nanoelectrocatalyst Based on High‐Density Au/Pt Hybrid Nanoparticles Supported on a Silica Nanosphere

A high‐efficiency nanoelectrocatalyst based on high‐density Au/Pt hybrid nanoparticles supported on a silica nanosphere (Au‐Pt/SiO₂) has been prepared by a facile wet chemical method. Scanning electron microscopy, transmission electron microscopy, energy‐dispersive X‐ray spectroscopy, and X‐ray photoelectron spectroscopy are employed to characterize the obtained Au‐Pt/SiO₂. It was found that each hybrid nanosphere is composed of high‐density small Au/Pt hybrid nanoparticles with rough surfaces. These small Au/Pt hybrid nanoparticles interconnect and form a porous nanostructure, which provides highly accessible activity sites, as required for high electrocatalytic activity. We suggest that the particular morphology of the Au‐Pt/SiO₂ may be the reason for the high catalytic activity. Thus, this hybrid nanomaterial may find a potential application in fuel cells.     

Palladium nanoparticles supported on modified hollow Fe3O4@TiO2: Preparation,characterization, and catalytic activity in Suzuki cross‐coupling reactions

Hollow Fe₃O₄@TiO₂‐NH₂/Pd as a light‐weight, magnetically heterogeneous catalyst was successfully prepared, and characterized by using different techniques including X‐ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FT‐IR), field‐emission scanning electron microscopy (FE‐SEM), transmission electron microscopy (TEM), energy‐dispersive X‐ray spectroscopy (EDX), vibrating sample magnetometer (VSM) measurements, and thermogravimetric analysis (TGA). Then this heterogeneous catalyst was tested in the Suzuki cross‐coupling reaction, and the results confirmed the success of this method. The catalyst could be separated easily using an external magnet and reused at least in five runs successfully without any appreciable loss in its catalytic activity.     

Nano‐Fe3O4@SiO2‐SO3H: A magnetic,reusable solid‐acid catalyst for solvent‐free reduction of oximes to amines with the NaBH3CN/ZrCl4 system

In this study, the immobilization of sulfonic acid on silica‐layered magnetite was carried out by the reaction of ClSO₃H with silica‐layered magnetite. The prepared magnetic nanoparticles of Fe₃O₄@SiO₂‐SO₃H were then characterized using scanning electron microscopy, energy dispersive X‐ray spectroscopy, X‐ray diffraction, Fourier transform infrared spectroscopy, vibrating sample magnetometry, and transmission electron microscopy. The sulfonated nanocomposite exhibited excellent catalytic activity and reusability in the reduction of various aldoximes and ketoximes with NaBH₃CN in the presence of ZrCl₄. All reactions were carried out under solvent‐free conditions (r.t. or 75–80°C) within 3–70 min to afford amines in high to excellent yields.     

Structure‐activity relationship of supported Au catalysts with high catalytic activity by modifying the inactive supports

Three supported Au catalysts have been prepared by the deposition‐precipitation method by using the active carbon (AC), SiO₂‐AC, and SiO₂‐AC‐hollowed. The 3 supports were characterized by Brunauer‐Emmett‐Teller and scanning electron microscopy. Meanwhile, the supported Au nanoparticles were also characterized in detail by X‐ray powder diffraction, transmission electron microscopy, H₂‐TRP, and X‐ray photoelectron spectroscopy, and their catalytic activity and stability in CO oxidation was evaluated. The results demonstrated that Au supported on SiO₂‐AC‐hollowed exhibited much higher catalytic activity with acceptable stability for 72 hours than the other 2. We attributed to finer supported Au nanoparticles with abundant low‐coordinated Au atoms on the surfaces of hollowed supports with large special surface area and abundant pore structure. In summary, we successfully found an efficient and cheap method to prepare catalysts with high catalytic activity and acceptable stability by modifying the inactive supports.     

Solvent‐free synthesis of propargylamines catalyzed by an efficient recyclable ZnO‐supported CuO/Al2O3 nanocatalyst

An efficient nanocatalyst of ZnO‐supported CuO/Al₂O₃ (CuO/ZnO/Al₂O₃ nanocatalyst) was prepared by the co‐precipitation method and characterized by scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, X‐ray powder diffraction and Brunauer–Emmett–Teller surface area analysis. CuO/ZnO/Al₂O₃ nanocatalyst proved to be a very efficient catalyst on the synthesis of propargylamines under solvent‐free conditions in high yields. Moreover, the catalyst can be recyclable without reducing catalytic activity up to five times.     

Cu(II) immobilized on mesoporous organosilica as an efficient and reusable nanocatalyst for one‐pot Biginelli reaction under solvent‐free conditions

Cu(II) immobilized on mesoporous organosilica nanoparticles (Cu²⁺@MSNs‐(CO₂^?)₂) has been synthesized, as a inorganic–organic nanohybrid catalyst, through a post‐grafting approach. Its characterization is carried out by Fourier transform infrared spectroscopy (FT‐IR), X‐ray diffraction (XRD), Scanning electron microscopy (SEM), Transmission electron microscopy (TEM), Energy dispersive X‐ray (EDX), Thermogravimetric/differential thermal analyses (TGA‐DTA), and Nitrogen adsorption–desorption analysis. Cu²⁺@MSNs‐(CO₂^?)₂ exhibits high catalytic activity in the Biginelli reaction for the synthesis of a diverse range of 3, 4‐dihydropyrimidin‐2(1H)‐ones, under mild conditions. The anchored Cu(II) could not leach out from the surface of the mesoporous catalyst during the reaction and it has been reused several times without appreciable loss in its catalytic activity.     

Fe3O4‐supported Schiff‐base copper (II) complex: A valuable heterogeneous nanocatalyst for one‐pot synthesis of new pyrano[2,3‐b]pyridine‐3‐carboxamide derivatives

A novel Cu (II) Schiff‐base complex immobilized on core‐shell magnetic Fe₃O₄ nanoparticles (Fe₃O₄@SPNC) was successfully designed and synthesized. The structural features of these nanoparticles were studied and confirmed by using various techniques including FT‐IR spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy‐dispersive X‐ray spectroscopy (EDS), vibrating sample magnetometer (VSM), X‐Ray diffraction (XRD), wavelength dispersive X‐ray spectroscopy (WDX), and inductively coupled plasma (ICP). These newly synthesized nanoparticles have been used as efficient heterogeneous catalytic system for one‐pot multicomponent synthesis of new pyrano[2,3‐b]pyridine‐3‐carboxamide derivatives. Notably, the catalyst could be easily separated from the reaction mixture by using an external magnet and reused for several successive reaction runs with no significant loss of activity or copper leaching. The present protocol benefits from a hitherto unreported MNPs‐immobilized Cu (II) Schiff‐base complex as an efficient nanocatalyst for the synthesis of newly reported derivatives of pyrano[2,3‐b]pyridine‐3‐carboxamide from one‐pot multicomponent reactions.     

Fe3O4@SiO2@Im‐bisethylFc [HC2O4] as a novel recyclable heterogeneous nanocatalyst for synthesis of bis‐coumarin derivatives

Nanomagnetic bisethylferrocene‐containing ionic liquid supported on silica‐coated iron oxide (Fe₃O₄@SiO₂@Im‐bisethylFc [HC₂O₄]) as a novel catalyst was designed and synthesized. The described catalyst was recycled and used without change in the time and efficiency of the condensation reaction. The Fourier transform‐infrared spectroscopy (FT‐IR), scanning electron microscopy images, X‐ray diffraction patterns, energy‐dispersive X‐ray spectroscopy, transmission electron microscope and vibrating‐sample magnetometer results confirmed the formation of Fe₃O₄@SiO₂@Im‐bisethylFc [HC₂O₄] magnetic nanoparticle. The novel bis‐coumarin derivatives were identified by ¹H‐NMR, ¹³C‐NMR, FT‐IR and CHNS analysis.     

Palladium supported on silica–chitosan hybrid material (Pd‐CS@SiO2) for Suzuki–Miyaura and Mizoroki–Heck cross‐coupling reactions

Palladium supported on silica–chitosan hybrid material was prepared and characterized using thermogravimetric and differential thermogravimetric analyses, scanning electron microscopy, and Fourier transform infrared, energy‐dispersive X‐ray and X‐ray photoelectron spectroscopies. The prepared Pd‐CS@SiO₂ catalyst (1 mol%) was used for the Suzuki–Miyaura cross‐coupling reaction of various aryl halides and arylboronic acids in 95% ethanol at 80 °C and the Mizoroki–Heck reaction in dimethylformamide at 110 °C using K₂CO₃ as a base. The developed catalyst is well suitable for the 3R approach (recoverable, robust, recyclable) for cross‐coupling reactions without appreciable loss of its activity. Copyright © 2015 John Wiley & Sons, Ltd.     

Diethyldisulfoammonium chlorometallates as heterogeneous Brønsted–Lewis acidic catalysts for one‐pot synthesis of 14‐aryl‐7‐(N‐phenyl)‐14H‐dibenzo[a,j]acridines

A new series of Brønsted–Lewis acidic diethyldisulfoammonium chlorometallates, [DEDSA][FeCl₄] and [DEDSA]₂[Zn₂Cl₆], were synthesized as solid materials from the reaction of [(Et)₂N(SO₃H)₂][Cl] ionic liquid with transition metal chlorides (FeCl₃ and ZnCl₂) at 80 °C in neat condition for 2 h. The chlorometallates were fully characterized using various spectroscopic and analytical techniques such as Fourier transform infrared, UV–visible and Raman spectroscopies, powder X‐ray diffraction, scanning electron microscopy, energy‐dispersive X‐ray and thermogravimetric analyses, Hammett acidity and elemental analyses. Their catalytic activity was studied as reusable heterogeneous catalysts for the three‐component synthesis of novel 14‐aryl‐7‐(N‐phenyl)‐14H‐dibenzo[a,j]acridines under solvent‐free conditions at 100 °C.